Report Profile Use & fields in dynamic selection in RE-FX reports..
I have two requirements:
1. Some of the SAP delivered fields in RE master data of BE,PR,BU and RO are not required by our client. Thus we have hidden them using field status transaction. However they are still available in RE info system in Dynamic selection as well as in output screen. How can we remove these fields from information system as well.
2. Some fields were added to the master data using BDT, they are visisble in the report however, they are not available in Dynamic Selections. How can we add them in dynamic selection as well during report execution.
The transaction codes for reports are e.g. REISBE, REISBU, REISPR, REISRO, RECN, etc.
Can ReportProfile be of some use?? If yes, how can we configure the same.
Regards
Rohit
I am aware of this, however, creating a variant still keeps the fields in hidden list in change variant section and any user maygo and bring the same to viewable list.
I am willing if we can simply remove those fields from the display screen to avoid any confusion in future.
Regards
Rohit
Similar Messages
-
Dynamic selections for the FBL5N report
Hi Experts,
Can any body help how to add the account assignment group field in dynamic selections for the FBL5N report.
rgds / SriniHi Alex,
Thanks for your quick response, here for the report FBL5N the logical database is DDF and the field which should be add in dynamic selection is (KTGRD) account assignment group is available in KNVV table but this table is not available in DDF logival database.
Please suggest us how we can pickup this field into the report FBL5N for dynamic selections.
regards / Srini -
Custmer Class. field in dynamic selection of FBL5N not cming in Report
Hi,
After selecting Customer Classification field in Dynamic selection of Transaction Code FBL5N and saving it and creating a Variant, this field doesnot come in output of report after execution.
Can anybody send a reply on this asap.
Regards
BobHi,
After executing the report in FBL5N, check in the display layout if the same field is available. If it is available include it in the display list (Left side of the pop up screen). Save the layout after including and make it default or user specific as per requirement.
Hope this helps you.
Thanks and Regards,
Anit -
'Plant Location' field in dynamic selection of report
Hi Experts,
I have entered some value in plant location in WBS org. data tab and want to filter the report by giving this field in dynamic selection of reports. But this field is not availble in dynamic selection. how we can add the same, even this is standard field in PRPS table (PRPS-STORT). Pls help.
Regards
Dinesh ChauhanIn standard SAP this field is not set for dynamic selection
you can create your customer view with STORT activated or you can change the STD view
SE36
enter PSJ as logical database
go to menu path (in that same screen)
Extras -> selection views
this will default to CUS (short for CUS view)
change this to SAP and change button
In the table node section scroll down till you come to table PRPS_R then double click on that
in the table field section below enter B2 next to the stort field (you may to scroll) - this means that this will now be visible in the org unit section for WBS in dyn selection
save etc and then re try -
Include new field in dynamic selection in fbl1n
Hi Guys,
I want to add a new field in dynamic selection in tcode FBL1N.
Regards,
H.SathiskumarHi Sathiskumar,
Here are general instructions for adding new fields to the dynamic selection:
1) Call Transaction SE36
2) Enter logical database DDF, KDF or SDF (for FBL5N, FBL1N, FLB3N)
3) Menu -> Extras -> selection views
4) Here you can find 2 origins of the view (SAP and CUS).
The standard view SAP is used. Create your own using view CUS. First copy the view SAP.
On the left side are the functional groups.
01 Customer master => fields from table KNA1
02 Company code => fields from table KNB1
03 Documents => fields from table BSID
Only those fields from these tables can be used for dynamic selection
5) To get another field from e.g. table KNB1 for the dynamic selection double click on the right side on
table KNB1. The field in the lower area will be changed. Search for the desired field and enter a 03
in front of the field. Save.
6) Test in your report.
Note: Not every table and field can be used as dynamic selection. It is also necessary that the report
allows selection for that field."
Furthermore I suggest You to have a look at the note number 310886 that can be useful.
Customers: logical database: DDF
Permitted tables:
KNA1, KNB1: All fields are permitted that are contained in the VF_DEBI view. If necessary, you have to
include additional fields in the view fields category using Transaction SE11.
I hope this information may help you in resolving the reported issue.
Regards,
Emoke -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks, -
Adding field in Dynamic Selection in FAGLL03
HI all,
I would like to filter date based on Document header Text for a particular GL account.
But when i am executing FAGLL03, i am not able to find in Dynamic Selections, Document Header Text field.
In the report iam able to find Doc header text.
How can i get the Documen header Text in Dynamic Selections pf FAGLL03.
regards
JayaHi,
Thanks for your reply. Sorry i am not the original poster of the message. I posted on http://scn.sap.com/thread/3303233 but there was no answer over there. I already tried the note. But as vendor/customer code are not in SKA1 or SKB1 or BSIS tables, even though I added LIFNR and KUNNR fields to BSIS_FS append structure and they appear in dynamic selection of FAGLL03, the report output does not select based on the customer code I input in the dynamic selection. It has no effect. Anything that I missed out?
Many thanks. -
Functional area(FKBER field in the selection screen of the report painter))
Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers. -
Add certain field at dynamic selection screen in FBL3N transaction
Hello Expert,
I would like to add entry date field (BKPF-CPUDT) at dynamic selection screen in FBL3N transaction.
So, I went to SE36 transaction and changed something in selection view for SDF.
However, it didn't work.
Is there anyone who knows how to add a certain field at dynamic selection screen in FBL3N transaction?
Thanks in advance.
BR,
Chris KimHi
Refer to the following thread
Additional field selections in FB03
It talks about adding Header Text field
You should be able to add entry date similarly
Regards
Sach!n -
Passing values to a dynamic selection screen via a report
Hi,
I have the following problem and need to seek your expertise urgently.
In my program, I need to call another report by passing in parameters to the selection screen of other report. However, I could not pass values into a dynamic selection screen. I tried to use submit (report) with free selection but do not know how it works.
Currently, I tried calling the function RS_REFRESH_FROM_DYNAMICAL_SEL and FREE_SELECTIONS_RANGE_2_EX. Using the object the first function has returned to me, I tried to append values such as fieldname etc to it. However, I realised the field names of a dynamic selection screen keeps changing. So I would not know how to pass a particular value to a selection field.
Appreciate any help given.
Thanks,
CKHello CK,
Are you using logical database in your selection screen program attributes? If it is, look at include file DBxxxSEL for parameter named xxxDYNSE where xxx = logical database. Debug the program that has that dynamic selection, and look at field xxxDYNSE. This should give you a hint on how to populate the parameter when you submit the program. -
How to Add fields in dynamic selection LDB BRF
Hi All,
I have requirement to add a field BSEG-ZLSCH in Logical Database BRF dynamic selection.
I have tried doing the same by using below mentioned link but its not appearing in the report dynamic selection screen
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Could you please help me a Legal change delivery is pending due to this issue.
Thanks and best regards,
Niteesh RaiDear Niteesh,
The Logical Data Base BRF reads table BKPF and BSEG, but there is no
option to include fields from BSEG in the dynamic selection.
You can display all the tables included in BRF, but only fields from
BKPF could be included in the dynamic selection. You cannot add
entries from BSEG, BSET, KNB1, KNBK, and so on that are listed here.
You are right, there is not note that explains this behaviour, but I
inform you what is the system design. This has been confirmed by my
Development colleagues.
Regarding to note 832997, this is valid for releases 500 and 600 when
New G/L is available. The system functionality has been enhanced in
release 500 so you can add fields from FAGLFREESEL that is similar
to BSEG with New G/L.
BR, Hana -
Dynamic selection of columns in report and print the output
Hi,
I tried to have dynamic selection of columns in SQL query using lexical parameter. The hitch is how to print those selected column in excel ouput ?
Suppose
I have select &col from table_name
Initial value of &col is col1 and in data layout only col1 appears
where &col was replaced with more than a column (col1,col2,col3)
now how to print the column selected at the run time,
i have coded in Before Report Trigger
:cell_val := ' <td><rw:field id:"cl1" src="col1"></rw:field></td>
<td><rw:field id:"cl2" src="col2"></rw:field></td>
<td><rw:field id:"cl3" src="col3"></rw:field></td> ' ;
and this user parameter was replaced in web source using JSP expression
<rw:getvalue id: "v_cell" src:"cell_val"></rw:getvalue>
<rw:foreach src:"g_val">
<table>
<tr>
<% =v_cell%>
</tr>
</table>
</rw:foreach>
but in the output i can see only blank columns
Regards
SureshThe strings replaced by expression <%= v_cell %>
should print the field values contained in col1,col2,col3 columns, but nothing is printed . i think the custom tags (rw...) are not replaced by the jsp expression properly. -
Dynamic Selection Variable for CO report
Dear Expert,
I have created cost center report using report painter. I wanted to setup dynamic selection variant with values Current Fiscal Year and period as current -1. With this variant I wanted to generate background job, but noticed that the report which I created does not provide me option "D" but only provide me option variable "T"
I am looking option either I get option "D" or If "D" is not possible then how can I achieve above using variable type "T"?
Looking for your assistance. Thanks in advance!
B/R
Prashant RaneHi,
'D' type of variable can be assigned only to a field of 'date' format. 'Period' is not that kind of field, its format is numeric of 2 digits.
Regards,
Eli -
Problem in dynamic selection in vendor balance report tcode S_ALR_87012082
Hello Friends,
After upgrading from 4.7 to ecc 6.0 we are facing the below mentioned problem.
In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit the requirement. We have only, vendor master and company code in the dynamic selections.
Is there any customization tht needs to be set???
Thanks,
SunnyHi Vas,
I am not sure..... but you can view the details in "S_ALR_87012079", you need to chnage the layout....
If the hint is useful Say thanks by reward .
Regards,
Prabhu Rajesh -
How to add a field in dynamic selections
HI,
There is a requirement in which i need to add a field in existing program of dynamic selections.
I have added a field in the screen.But I was not able to write the label and is not displaying.
I ahve copied evrything from existing coding.but still.
In the program ,Field groups are being used.
I have inserted my field in that header and item of field groups.
But i was not able to select the data based on this selection.
i will attach my code here for reference.
can anyone please help me how to use these filed symbols.
If possible send me the document on Dynamic selections.
the field i need to add is bkpf-bktxt
TABLES:
tcurx,
lfa1,
kna1,
bhdgd,
bkpf,
bseg,
bsega,
b0sg,
fimsg,
sarkey,
t001,
vbset,
sscrfields.
Selektionsparameter *
begin_of_block 1.
PARAMETERS:
par_nbel LIKE rfpdo-bpetnbel, "Normale Belege
par_vbel LIKE rfpdo-epojvbel, "Vorerfaßte Belege
par_sbel LIKE rfpdo-bpetsbel, "Statistischen Belege
par_mbel LIKE rfpdo-epojmbel, "Musterbelege
par_dbel LIKE rfpdo1-korbdbel. "Dauerbuchungsurbelege
end_of_block 1.
begin_of_block 2.
PARAMETERS:
par_summ LIKE rfpdo1-allgsumm, "nur Summenausgabe
par_hkto LIKE rfpdo2-beljhkto, "Hauptbuch- statt Personenkonto
par_altk LIKE rfpdo1-allgaltk, "alternative Kontonummer
par_lsep LIKE rfpdo-allglsep, "Listseparation
par_mikf LIKE rfpdo-allgmikf, "Mikrofiche-Zeile
par_line LIKE rfpdo1-allgline. "Zusatztitel
Eingaben für optische Archivierung
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: arc LIKE rfpdo1-allgarch.
SELECTION-SCREEN COMMENT 3(29) text-103 FOR FIELD arc.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg1(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg2(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
end_of_block 2.
PARAMETERS: arc_mem LIKE arc_params NO-DISPLAY.
Felder und Feldleisten *
CONSTANTS:
con_true TYPE i VALUE 1,
con_false TYPE i VALUE 2,
con_hash TYPE i VALUE 1,
con_vendor TYPE c VALUE 'K',
con_cust TYPE c VALUE 'D'.
Global Data
DATA: BEGIN OF hash_totals OCCURS 25,
bukrs LIKE t001-bukrs,
poper(7),
dramt LIKE bseg-wrbtr,
cramt LIKE bseg-wrbtr,
END OF hash_totals.
DATA:
factor TYPE i,
Zähler
cnt_bukrs(4) TYPE p, "Anzahl Buchungskreise
cnt_max LIKE sy-tfill, "Maximum der CNT_Ti
cnt_t0 LIKE sy-tfill, "Anzahl Einträge in Ti
cnt_t1 LIKE sy-tfill,
cnt_t2 LIKE sy-tfill,
cnt_t3 LIKE sy-tfill,
cnt_t4 LIKE sy-tfill,
cnt_t5 LIKE sy-tfill,
Fehler
err_altkt(1) TYPE c, "alt. Kontonummer nicht gefunden
Flags
flg_section TYPE i,
flg_vendr2 TYPE i,
flg_vendr3 TYPE i,
flg_color(1) TYPE n, "0 - intensified off
Hilfsfelder
hlp_belnr(10) TYPE c, "Anzeigefeld Belegnummer
hlp_bstat LIKE bkpf-bstat, "Status vorerfaßter Belege
hlp_buper(7) TYPE c, "Buchungsperiode mit '/'
hlp_null(1) TYPE p VALUE 0, "Betrag Null
hlp_sakan LIKE ska1-sakan, "Anzeigefeld Kontonummer
hlp_wrshb(26) TYPE c, "FW-Betrag mit Währung in Klammer
hlp_vnd_amt(43) TYPE c,
Texte
txt_line0(132) TYPE c, "Überschriften
txt_line1(132) TYPE c,
txt_line2(132) TYPE c,
txt_line(132) TYPE c, "Hilfstext
Feldleisten
BEGIN OF mikfi, "Information Mikrofiche-Zeile
bstat LIKE bkpf-bstat,
bukrs LIKE bkpf-bukrs,
gjahr LIKE bkpf-gjahr,
belnr LIKE bkpf-belnr,
END OF mikfi.
Interne Tabellen *
DATA:
Belegkopfinformationen
BEGIN OF t0 OCCURS 4, "0 - allgemeine Angaben
info(1) TYPE n, "1 - vorerfaßter Beleg
END OF t0, "2 - Referenz
"3 - Storno
"4 - gelöschter vorerfaßter Beleg
"5 - ersetzter vorerfaßter Beleg
"6 - Ausgleichsbeleg
"7 - zurückgenommener Ausgleich
Personenkonteninformationen je Beleg
BEGIN OF t1 OCCURS 10,
koart LIKE bseg-koart, "Kontoart
ktonr LIKE bseg-kunnr, "Kontonummer(Debitor/Kreditor)
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
zlspr LIKE bseg-zlspr, "Payment Block Key - CR 21709
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
wrshb LIKE bsega-dmshb, "Betrag in Fremdwährung
xfwae(1) TYPE c, "X - Fremdwährungsinformation
name1 LIKE lfa1-name1, "Customer/ Vendor Name
END OF t1,
Steuerinformationen je Beleg
BEGIN OF t2 OCCURS 10,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
END OF t2,
Sachkonteninformationen je Beleg
BEGIN OF t3 OCCURS 20,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
koart LIKE bseg-koart, "Kontoart
hkont LIKE bseg-hkont, "Hauptbuchkonto
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
kostl LIKE bseg-kostl, "Cost Center
prctr LIKE bseg-prctr, "Profit Center
END OF t3,
Sonderhauptbuchbeträge für Debitoren (nur Ausgabe)
BEGIN OF t4 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t4,
Sonderhauptbuchbeträge für Kreditoren (nur Ausgabe)
BEGIN OF t5 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t5,
Summeninformationen je Buchungskreis
BEGIN OF tbukrs OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs,
Sonderhauptbuchinformationen je Buchungskreis
BEGIN OF tbukrs_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs_u,
Summeninformationen je Hauswährung
BEGIN OF twaers OCCURS 10,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Hauswährungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers,
Sonderhauptbuchinformationen je Hauswährung
BEGIN OF twaers_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Währungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers_u,
Fehlerprotokoll im Batch
BEGIN OF tfimsg OCCURS 10.
INCLUDE STRUCTURE fimsg.
DATA END OF tfimsg.
Strukturen für optische Archivierung *
DATA BEGIN OF info OCCURS 10.
INCLUDE STRUCTURE bhinf.
DATA END OF info.
DATA:
arc_save LIKE arc_params,
arc_valid.
Feldgruppen *
FIELD-GROUPS: header, daten.
INSERT:
bkpf-bukrs "Buchungskreis
bkpf-bktxt "Change by OS0794
bkpf-bstat "Belegstatus
bkpf-gjahr "Geschäftsjahr
bkpf-belnr "Belegnummer
bseg-buzei "Buchungszeile
INTO header.
INSERT
bkpf-blart "Belegart
bkpf-bktxt "Change by OS0794
bkpf-budat "Buchungsdatum
bkpf-stblg "Stornobelegnummer
bkpf-waers "Währungsschlüssel
bkpf-xblnr "Referenzangabe
bseg-bschl "Buchungsschlüssel
bseg-xnegp "Negativbuchung
bseg-zlspr "Payment Block Key - CR 21709
bseg-hkont "Hauptbuchkonto
bseg-koart "Kontoart
bseg-kunnr "Debitornummer
bseg-lifnr "Kreditornummer
bseg-mwart "Mehrwertsteuerart (A oder V)
bseg-mwskz "Mehrwertsteuerkennzeichen
bseg-umskz "Sonderhauptbuch-Kennzeichen
bsega-dmshb "S/H-Betrag in Hauswährung
bsega-mdshb "Umsatzsteuerbetrag in Hauswährg
bsega-wrshb "S/H-Betrag in Fremdwährung
hlp_bstat "Status vorerfaßter Belege bzw.
bseg-kostl
bseg-prctr
bkpf-monat
INTO daten. "Status von Belegen ohne Zeilen
Vorschlagswerte *
INITIALIZATION.
get_frame_title: 1,2.
par_nbel = 'X'.
par_sbel = space.
par_mbel = space.
par_dbel = space.
par_vbel = 'X'.
Archivinformationen nur fuer Ausgabe *
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'ARC'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Prüfung und Korrektur der eingegebenen Daten *
AT SELECTION-SCREEN ON arc.
IF arc <> ' ' AND arc_mem(20) = space.
CALL FUNCTION 'GET_ARCHIVE_PARAMETERS'
EXPORTING
in_parameters = arc_save
printer = ' '
IMPORTING
out_parameters = arc_mem
valid = arc_valid
EXCEPTIONS
OTHERS = 04.
IF arc_valid <> 'X' OR arc_mem = space.
CLEAR arc_mem.
MESSAGE e999 WITH text-102.
ENDIF.
arc_msg1 = arc_mem(10).
arc_msg2 = arc_mem+10(10).
ENDIF.
IF arc = ' '.
CLEAR arc_mem.
arc_msg1 = arc_msg2 = space.
ENDIF.
arc_save = arc_mem.
AT SELECTION-SCREEN ON arc_msg1.
arc_msg1 = arc_mem(10).
AT SELECTION-SCREEN ON arc_msg2.
arc_msg2 = arc_mem+10(10).
AT SELECTION-SCREEN.
IF par_nbel EQ space AND
par_mbel EQ space AND
par_dbel EQ space AND
par_sbel EQ space AND
par_vbel EQ space.
SET CURSOR FIELD 'PAR_NBEL'.
MESSAGE e111.
ENDIF.
optische Archivierung
IF arc <> ' ' AND par_mikf <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-100.
ENDIF.
IF arc <> ' ' AND par_lsep <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-101.
ENDIF.
IF arc = 'X' AND sscrfields-ucomm = 'PRIN'.
sscrfields-ucomm = 'ONLI'.
sy-pdest = 'LP01'. "wegen Abfrage in Batch-Heading
ENDIF.
Vorbelegungen *
START-OF-SELECTION.
bhdgd-lines = sy-linsz.
bhdgd-repid = sy-repid.
bhdgd-uname = sy-uname.
bhdgd-separ = par_lsep.
bhdgd-domai = 'BUKRS'.
IF arc = 'X'.
bhdgd-miffl = 'A'.
ENDIF.
IF par_mikf = 'X'.
bhdgd-miffl = 'X'.
ENDIF.
Initialisierung für optisches Archiv
PERFORM open_archive(rsbtchh0) USING arc_mem.
info-name = 'BKPF-BSTAT'. info-len = space. APPEND info.
info-name = 'BKPF-BUKRS'. info-len = space. APPEND info.
info-name = 'BSEG-GJAHR'. info-len = space. APPEND info.
info-name = 'BKPF-BELNR'. info-len = space. APPEND info.
info-name = 'BKPF-BKTXT'. info-len = space. APPEND info.
PERFORM start_archive(rsbtchh0) TABLES info.
b0sg-xstan = par_nbel.
b0sg-xstam = par_mbel.
b0sg-xstad = par_dbel.
b0sg-xstas = par_sbel.
b0sg-xstaa = 'X'.
IF par_vbel EQ 'X'.
b0sg-xstav = 'Z'.
ENDIF.
Selektion *
GET bkpf FIELDS blart bstat budat monat stblg waers xblnr bktxt.
CLEAR hlp_bstat.
IF 'ABVWZ' CA bkpf-bstat.
hlp_bstat = bkpf-bstat.
CLEAR bkpf-bstat.
IF 'ABWZ' CA hlp_bstat.
CLEAR: bseg, bsega.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDIF.
ENDIF.
GET bseg.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
GET bkpf LATE.
PERFORM vorerfasste_steuer_merken.
Seitenkopf *
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
IF flg_section <> con_hash.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE / txt_line0.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / txt_line1,
/ txt_line2.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: / sy-vline NO-GAP,
'Hash Totals'(205),
132 sy-vline.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / sy-vline NO-GAP,
(10) 'CoCd'(200),
(07) 'Period'(201),
sy-vline,
(16) 'Debit Amount'(202),
(16) 'Credit Amount'(203),
sy-vline,
(16) 'Total'(204).
ENDIF.
ULINE.
Sortieren der Daten *
END-OF-SELECTION.
DESCRIBE TABLE tbukrs LINES sy-tfill.
IF sy-tfill EQ 0.
CALL FUNCTION 'POPUP_NO_LIST'.
ENDIF.
SORT.
SORT tbukrs.
Belegjournal *
LOOP.
*-- Neuer Buchungskreis -
AT NEW bkpf-bukrs.
SELECT SINGLE * FROM t001 WHERE bukrs EQ bkpf-bukrs.
IF sy-subrc NE 0.
IF sy-batch EQ space.
MESSAGE a101 WITH bkpf-bukrs.
ELSE.
MESSAGE s101 WITH bkpf-bukrs.
STOP.
ENDIF.
ENDIF.
bhdgd-bukrs = bkpf-bukrs.
bhdgd-werte = bkpf-bukrs.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '5'.
ENDAT.
*-- Neuer Belegstatus -
AT NEW bkpf-bstat.
PERFORM new_page USING bkpf-bstat.
flg_color = 1.
ENDAT.
*-- Neue Belegnummer -
AT NEW bkpf-belnr.
REFRESH: t0, t1, t2, t3.
PERFORM belegkopf_merken.
mikfi-bstat = bkpf-bstat.
mikfi-bukrs = bkpf-bukrs.
mikfi-gjahr = bkpf-gjahr.
mikfi-belnr = bkpf-belnr.
bhdgd-grpin = mikfi.
ENDAT.
*-- Belegzeile -
PERFORM belegzeile_merken.
*-- Ende einer Belegnummer -
AT END OF bkpf-belnr.
PERFORM beleg_schreiben.
ULINE.
ENDAT.
*-- Ende eines Buchungskreises -
AT END OF bkpf-bukrs.
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING bkpf-bukrs.
ENDAT.
ENDLOOP.
Summenblätter *
bhdgd-bukrs = ' '.
bhdgd-werte = ' '.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING ' '.
PERFORM hauswaehrung_schreiben.
Print Hash Totals *
flg_section = con_hash.
NEW-PAGE.
PERFORM prt_hash TABLES hash_totals.
Fehlerprotokoll *
CALL FUNCTION 'FI_MESSAGE_CHECK'
EXCEPTIONS
no_message = 4.
IF sy-subrc = 0.
IF sy-batch EQ space.
PERFORM titel_fuellen USING '6'.
NEW-PAGE.
FORMAT COLOR 6 INTENSIFIED.
CALL FUNCTION 'FI_MESSAGE_SORT'.
CALL FUNCTION 'FI_MESSAGE_PRINT'
EXPORTING
i_xskip = 'X'.
ELSE.
CALL FUNCTION 'FI_MESSAGE_GET'
TABLES
t_fimsg = tfimsg.
LOOP AT tfimsg.
MESSAGE ID tfimsg-msgid TYPE tfimsg-msgty NUMBER tfimsg-msgno
WITH tfimsg-msgv1 tfimsg-msgv2 tfimsg-msgv3 tfimsg-msgv4.
ENDLOOP.
ENDIF.
ENDIF.
U N T E R P R O G R A M M E *
0. TITEL_FUELLEN *
1. NEW_PAGE *
2. SUMME_MERKEN *
3. VORERFASSTE_STEUER_MERKEN *
4. BELEGKOPF_MERKEN *
5. BELEGZEILE_MERKEN *
6. BELEG_SCHREIBEN *
7. BUCHUNGSKREIS_SCHREIBEN *
8. HAUSWAEHRUNG_SCHREIBEN *
9. SUMMENZEILE_SCHREIBEN *
10. KONTONUMMER *
0. FORM TITEL_FUELLEN *
Ersetzt das Global &CCCU durch die Buchungskreiswährung *
F00_TEXT ist 4, 5 oder 6, je nach Gruppe der Textelemente *
FORM titel_fuellen USING f00_text.
DATA:
BEGIN OF txt_502,
T1(49) TYPE C, "CR 21709
W1(23) TYPE C, "CR 21709
t1(50) TYPE c, "CR 21709
w1(22) TYPE c, "CR 21709
t2(6) TYPE c,
w2(15) TYPE c,
t3(21) TYPE c,
w3(16) TYPE c,
t4(2) TYPE c,
END OF txt_502.
CASE f00_text. "Textelemente
WHEN '4'. "- für die Summenliste
txt_line0 = text-400.
txt_line1 = text-401.
txt_line2 = text-402.
WHEN '5'. "- für die Einzelpostenliste
txt_line0 = text-500.
txt_line1 = text-501.
txt_line2 = text-502.
IF par_hkto EQ 'X'.
txt_line1+33(10) = text-505.
txt_line2+33(10) = text-506.
ENDIF.
txt_502 = txt_line2.
REPLACE '&CCCU' WITH t001-waers INTO:
txt_502-w1, txt_502-w2, txt_502-w3.
CONDENSE:
txt_502-w1, txt_502-w2, txt_502-w3.
WRITE:
txt_502-w1 TO txt_502-w1 RIGHT-JUSTIFIED,
txt_502-w2 TO txt_502-w2 RIGHT-JUSTIFIED,
txt_502-w3 TO txt_502-w3 RIGHT-JUSTIFIED.
txt_line2 = txt_502.
WHEN '6'. "- für die Fehlerliste
txt_line0 = text-600.
txt_line1 = text-601.
txt_line2 = space.
WHEN OTHERS. "- initialisieren
txt_line0 = space.
txt_line1 = space.
txt_line2 = space.
ENDCASE.
ENDFORM. "TITEL_FUELLEN
1. FORM NEW_PAGE *
Initialisierungen für BATCH-HEADING Routine *
F01_BSTAT steuert den Aufbau des Reporttitels *
FORM new_page USING f01_bstat.
CASE f01_bstat. "Reporttitel
WHEN 'D'. "- für Dauerbuchungsurbelege
bhdgd-line1 = text-001.
WHEN 'M'. "- für Musterbelege
bhdgd-line1 = text-002.
WHEN 'S'. "- für statistische Belege
bhdgd-line1 = text-003.
WHEN OTHERS. "- für normale/vorerfaßte Belege
bhdgd-line1 = sy-title.
ENDCASE.
bhdgd-line2 = par_line.
bhdgd-inifl = 0.
NEW-PAGE.
ENDFORM. "NEW_PAGE
2. FORM SUMME_MERKEN *
Merken der Summeninformation *
FORM summe_merken.
CLEAR tbukrs.
tbukrs-bstat = bkpf-bstat.
tbukrs-bukrs = bkpf-bukrs.
tbukrs-bktxt = bkpf-bktxt.
tbukrs-gjahr = bkpf-gjahr.
tbukrs-monat = bkpf-monat.
tbukrs-dmsol = bsega-dmsol.
tbukrs-dmhab = bsega-dmhab.
IF 'DK' CA bseg-koart.
MOVE-CORRESPONDING tbukrs TO tbukrs_u.
tbukrs_u-koart = bseg-koart.
tbukrs_u-umskz = bseg-umskz.
tbukrs_u-dmsol = bsega-dmsol.
tbukrs_u-dmhab = bsega-dmhab.
COLLECT tbukrs_u.
tbukrs_u-monat = 0. "Summe für das Geschäftsjahr
COLLECT tbukrs_u.
ENDIF.
COLLECT tbukrs.
ENDFORM. "SUMME_MERKEN
3. FORM VORERFASSTE_STEUER_MERKEN *
Nachlesen der Steuerzeilen vorerfaßter Belege *
Gefüllt wird TBUKRS und der Extrakt *
FORM vorerfasste_steuer_merken.
CHECK hlp_bstat EQ 'V'.
SELECT * FROM vbset
WHERE ausbk EQ bkpf-bukrs
AND belnr EQ bkpf-belnr
AND gjahr EQ bkpf-gjahr.
CHECK vbset-hwste NE 0.
CLEAR: bseg, bsega.
bseg-koart = 'S'.
bseg-mwart = 'V'. "oder 'A', nur zum Füllen von T2
bseg-mwskz = vbset-mwskz.
IF vbset-shkzg EQ 'S'.
bsega-dmsol = vbset-hwste.
bsega-dmshb = vbset-hwste.
ELSE.
bsega-dmhab = vbset-hwste.
bsega-dmshb = - vbset-hwste.
ENDIF.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDSELECT.
ENDFORM. "VORERFASSTE_STEUER_MERKEN
4. FORM BELEGKOPF_MERKEN *
Je Beleg werden gefüllt: *
T0 - Informationsflag *
FORM belegkopf_merken.
t0-info = 0. "Belegkopf
APPEND t0.
CASE hlp_bstat.
WHEN 'A'.
t0-info = 6. "Ausgleichsbeleg
APPEND t0.
WHEN 'B'.
t0-info = 7. "zurückgen. Ausgleichsbeleg
APPEND t0.
WHEN 'V'.
t0-info = 1. "vorerfaßter Beleg
APPEND t0.
WHEN 'W'.
t0-info = 5. "ersetzter vorerfaßter Beleg
APPEND t0.
WHEN 'Z'.
t0-info = 4. "gelöschter vorerfaßter Beleg
APPEND t0.
ENDCASE.
IF bkpf-xblnr NE space AND hlp_bstat NA 'BWZ'.
t0-info = 2. "Referenz
APPEND t0.
ENDIF.
IF bkpf-stblg NE space.
t0-info = 3. "Storno
APPEND t0.
ENDIF.
SORT t0.
ENDFORM. "BELEGKOPF_MERKEN
5. FORM BELEGZEILE_MERKEN *
Je Beleg werden gefüllt: *
T1 - Personenkonteninformation *
T2 - Steuerinformation (nicht bei vorerfaßten Belegen) *
T3 - Sachkonteninformation *
FORM belegzeile_merken.
Vendors/ Customers
IF bseg-koart CA 'DK'.
t1-koart = bseg-koart.
IF par_hkto EQ 'X'.
t1-ktonr = bseg-hkont.
ELSEIF bseg-koart EQ 'K'.
t1-ktonr = bseg-lifnr.
ELSE.
t1-ktonr = bseg-kunnr.
ENDIF.
t1-bschl = bseg-bschl.
t1-umskz = bseg-umskz.
t1-xnegp = bseg-xnegp.
t1-zlspr = bseg-zlspr. "CR 21709
t1-dmshb = bsega-dmshb.
t1-wrshb = bsega-wrshb.
t1-xfwae = space.
APPEND t1.
Read the vendor description.
IF bseg-koart = con_vendor.
flg_vendr2 = con_true.
flg_vendr3 = con_true.
CLEAR lfa1-name1.
SELECT SINGLE name1
INTO lfa1-name1
FROM lfa1
WHERE lifnr = bseg-lifnr.
ELSEIF bseg-koart = con_cust.
CLEAR kna1-name1.
SELECT SINGLE name1
INTO kna1-name1
FROM kna1
WHERE kunnr = bseg-kunnr.
ENDIF.
IF bkpf-waers EQ t001-waers.
CLEAR t1.
ENDIF.
t1-xfwae = 'X'.
t1-name1 = lfa1-name1.
IF t1-name1 IS INITIAL.
t1-name1 = kna1-name1.
ENDIF.
APPEND t1.
CLEAR:
kna1-name1,
lfa1-name1.
CLEAR t1.
Save the hash total amounts
CLEAR tcurx-currdec.
SELECT SINGLE currdec
INTO tcurx-currdec
FROM tcurx
WHERE currkey = bkpf-waers.
IF tcurx-currdec = 1.
factor = 10.
ELSE.
factor = 100.
ENDIF.
CLEAR hash_totals.
hash_totals-bukrs = bkpf-bukrs.
CONCATENATE bkpf-monat '/' bkpf-gjahr INTO hash_totals-poper.
IF bsega-wrshb < 0.
hash_totals-cramt = bsega-wrshb * factor.
ELSE.
hash_totals-dramt = bsega-wrshb * factor.
ENDIF.
COLLECT hash_totals.
Tax accounts
ELSEIF bseg-mwart CA 'AV'.
t2-mwskz = bseg-mwskz.
t2-dmshb = bsega-dmshb.
APPEND t2.
IF flg_vendr2 = con_true.
flg_vendr2 = con_false.
CLEAR t2.
APPEND t2.
ENDIF.
GL Accounts
ELSEIF hlp_bstat NA 'ABWZ'.
t3-mwskz = bseg-mwskz.
t3-bschl = bseg-bschl.
t3-xnegp = bseg-xnegp.
t3-koart = bseg-koart.
t3-hkont = bseg-hkont.
t3-dmshb = bsega-dmshb.
APPEND t3.
IF flg_vendr3 = con_true
OR NOT bseg-kostl IS INITIAL
OR NOT bseg-prctr IS INITIAL.
flg_vendr3 = con_false.
CLEAR t3.
t3-kostl = bseg-kostl.
t3-prctr = bseg-prctr.
APPEND t3.
CLEAR t3.
ENDIF.
ENDIF.
ENDFORM. "BELEGZEILE_MERKEN
6. FORM BELEG_SCHREIBEN *
Ausgabe der Belginformationen *
FORM beleg_schreiben.
DATA:
len TYPE i.
Berechnung der benötigten Zeilen pro Beleg
DESCRIBE TABLE:
t0 LINES cnt_t0,
t1 LINES cnt_t1,
t2 LINES cnt_t2,
t3 LINES cnt_t3.
cnt_max = cnt_t0.
IF cnt_max LT cnt_t1.
cnt_max = cnt_t1.
ENDIF.
IF cnt_max LT cnt_t2.
cnt_max = cnt_t2.
ENDIF.
IF cnt_max LT cnt_t3.
cnt_max = cnt_t3.
ENDIF.
ADD 1 TO cnt_max.
IF cnt_max LE 10.
RESERVE cnt_max LINES.
ELSE.
RESERVE 5 LINES.
ENDIF.
SUBTRACT 1 FROM cnt_max.
Farbe setzen
IF flg_color EQ 0.
FORMAT COLOR 2 INTENSIFIED OFF.
flg_color = 1.
ELSE.
FORMAT COLOR 2 INTENSIFIED.
flg_color = 0.
ENDIF.
Index fuer optische Archivierung
PERFORM new-group(rsbtchh0).
DO cnt_max TIMES.
Belegkopfinformationen
WRITE /1 sy-vline NO-GAP.
IF sy-index LE cnt_t0.
READ TABLE t0 INDEX sy-index.
CASE t0-info.
WHEN 0. "Belegkopf
hlp_belnr = bkpf-belnr. "Belegnr. mit führenden Nullen
Referenz auf Originalbeleg
PERFORM start_doc_reference(rsbtchh0)
USING bkpf-bukrs bkpf-belnr bkpf-gjahr bkpf-bktxt. " change*
WRITE:
bkpf-bukrs,
hlp_belnr,
bkpf-blart,
bkpf-budat DD/MM/YYYY.
Ende der Referenz auf Originalbeleg
PERFORM end_doc_reference(rsbtchh0).
WHEN 1. "Vorerfaßter Beleg
WRITE:
(29) text-507.
WHEN 2. "Referenz
WRITE:
(12) text-503,
bkpf-xblnr.
WHEN 3. "Storno
WRITE:
(12) text-504,
bkpf-stblg.
WHEN 4. "Gelöschter vorerfaßter Beleg
WRITE:
(29) text-507,
(40) text-508.
WHEN 5. "Ersetzter vorerfaßter Beleg
txt_line = text-509.
REPLACE:
'&BLN' WITH bkpf-xblnr(10) INTO txt_line,
'&GJR' WITH bkpf-xblnr+10 INTO txt_line.
WRITE:
(29) text-507,
(40) txt_line.
WHEN 6. "Ausgleichsbeleg
WRITE: "
(29) text-510. "
WHEN 7. "zurückgen. Ausgleichsbeleg
WRITE: "
(29) text-511. "
ENDCASE.
ENDIF.
Personenkonteninformationen
Subledger Account Information
WRITE 31(1) sy-vline NO-GAP.
Internal tables T0 - T5 hold data for each section.
IF sy-index LE cnt_t1.
READ TABLE t1 INDEX sy-index.
IF par_hkto EQ 'X'.
PERFORM kontonummer USING t1-ktonr hlp_sakan.
ELSE.
hlp_sakan = t1-ktonr.
ENDIF.
IF t1-xfwae EQ space.
IF t1-xnegp = 'X'.
t1-xnegp = '-'.
ENDIF.
Write the vendor number.
WRITE: t1-koart,
hlp_sakan,
t1-bschl NO-GAP.
IF t1-umskz IS INITIAL.
WRITE: t1-xnegp NO-GAP,
t1-umskz.
ELSE.
WRITE: t1-umskz NO-GAP,
t1-xnegp.
ENDIF.
WRITE: t1-zlspr. "CR 21709 / 23588
WRITE: (22) t1-dmshb CURRENCY t001-waers.
ELSE.
Write the document currency, amount and the
vendor/ customerHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit
Maybe you are looking for
-
Messages are in to be delivered status
Many messages are in to be delivered status in the adapter engine message monitoring Can any body help regarding this
-
How to test to see if the cursor is on the last row in a jTable?
I like to know how to test the cursor position in jTable.
-
Hi everyone, We're trying to setup SSO at my company using this article (we're on Apex 3.1.2): http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html Everything is going smoothly so far, but we're now caugh
-
I'm leaving Monday on a business trip for which I'll need a spreadsheet on my laptop, so today (Saturday) went to the local Apple Store and bought a copy of iWork '08. I'm working my way through Numbers right now and so far everything is going well.
-
How do I determinie where to save document
I'm writing in Pages on the iPad. The document is automatically saved to iCloud. Is there a way to save it somewhere else? Like Dropbox or the iPads internl memory? Åke