Report S_ALR_87012993 issue: GREP blocks

Hello experts,
When I run report S_ALR_87012993 I get the following error:
"Internal error: More then 999 GREP blocks were requested"
Message no. GR215
Diagnosis
An internal error occurred in the Report Writer.
When running the program, you selected the option to store your results permanently.  However, when the selected data was stored in blocks in the GREP file, the maximum number of blocks was exceeded.
System Response
The selection program was terminated.
Procedure
Inform your system administrator.
You may have to increase the block size for the GREP blocks.
Is there anyone who knows what the problem is and how it can be solved?

The solution that worked for me was:
1.-Implement note 64537.  Import transport request of the change to your productive client.
2.-Regenerate report group using transaction code GR55 using report group 6O00.
3.-Run report S_ALR_87012993 again and it will work.
Best regards!
Alex.

Similar Messages

  • Internal Order Report  S_ALR_87012993 showing settled cost

    HI ,
    The issue here is related to IO report  S_ALR_87012993 showing up settled cost against a particular Cost Element/GL account. However when we use the drill down function it says "No actual Line Item exist". I have checked the line item details for that particular GL account which does not have any posting to it with the said IO and moreover no FI Posting is done to that GL account during that relevant period. Hence the IO report is showing up variance .
    I have checked the Settlement documents for  that period for the said IO (Table AUAK ) through Transaction Code KOB8 , but none of these settlement indicates that particular Cost element/GL Account.
    I have executed KOB1 which does not show up any line item with the said combination.
    Any idea why the system /report showing up such settlement to that particular Cost Element/GL account which does not have any Actual Line Item posted with that particular IO.
    Regards
    Jaydip

    This is very very strange. Are you sure is not facing some profile problems to view information ?
    KOB1 and S_ALR_87012993 have the same information: actual.
    When you run settlement, it goes to inventory delivery account or to wip account depends on order status.
    Sometimes people set a different account for settlement.
    Check the balance account in transaction FS10N/FBL3N it must be the same because FI and CO are balanced for this account.
    Regards

  • Changing currecy in report S_ALR_87012993

    Hi Friends ,
    Can anybody tell me how I can change the currecy in report S_ALR_87012993 .
    Presently its showing me cost in USD.
    I want the same cost in INR . because in my PM orders the cost is in INR.
    But our controlling area currency is USD.
    Regards
    AM

    Hi,
    You have report 'S_ALR_87012993 (6008-001).  For secoundary costs this report will always display in controlling
    area currency, no matter what reporting currency is set. This is an old report that was created when dependent reporting currency did not exist.
    But there is a solution to this issue. The solution quite simply is that by simply copying the reports and making one small change
    in the copied versions you can have a consistent view in both reports for the currency you want and it will work for all values.
    To achieve this please refer to the following WIKI Knowledge sources specifically created to assist on this issue:
    STEP 1: How to create the custom report with specified Currency:
            o http://wiki.sdn.sap.com/wiki/x/eYL9Cw
    STEP 2: How to use your newly created custom reports:
            o http://wiki.sdn.sap.com/wiki/x/sYYOD
    regards
    Waman

  • Is there any report to view" the blocked Vendor Invoices along with the Pay

    Dear Gurus,
    Is there any report to view" the blocked Vendor Invoices along with the Payment Date". Please Let me know.
    Balaji

    I think you can solve this issue with a Query.
    Fernando.

  • How do I replace someone else's Mac ID with my own? Bought iPhone second hand. Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his macID on his new iPhone now?? Any ideas, as this issue is blocking my access to iTune

    How do I replace someone else's Mac ID with my own?
    Bought iPhone second hand on TradeMe.
    Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
    This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
    This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
    Would appreciate any suggestion ????
    Thanks
    SamSings

    Settings>general>resets>erase all content and settings.
    That will put it back to its out of the box state. Set it up with your own apple Id.

  • Link to report an issue with Podcast update

    Someone posted a link so we could report an issue with the Podcast app the last time there were issues with an upgrade.
    I sync with my laptop iTunes. Since this latest update to the app, when I delete a podcast in iTunes on my laptop it will not delete on my i devices during a sync with my laptop. It just grays them out and leaves them on my device. It looks like I can manually delete them, but when you click the edit function to delete them, they are no longer grayed out, so you can't tell which to delete and which to keep.
    I don't do anything with the cloud, because I have limited wifi service and do most of my updating at a free wifi hotspot.
    If someone has that online link on where to report issues, I would appreciate you posting it again and this time I will save it.

    To Contact the Mac App Store Customer Service:
    http://www.apple.com/support/mac/app-store/contact.html?form=account
    To Contact iTunes Store Customer Service:
    Apple - Support - iTunes Store - Contact Us

  • Report for issuing C-Form to vendor

    Hi,
    Report for issuing C-Form to vendor regarding invoice booked against PO.
    Help me out in the above issue.
    Regards,
    R.K

    Hi Anjireddy,
    can you let me the path or T.code for the standrad C-Form and what is the process we has to follow for C-Form for vendor.
    Regards,
    R.K

  • Report generation issue

    what are the diff report generation issues?

    Nvm, solved it just had to set up Reporting studio in order to create an accurate report.

  • Report to see the Blocked Sales orders

    Hi friends,
       Is there any standard report to view the Blocked Sales orders in SAP.
    Please help me out.
    Thanks in Advance,
    Regards,
    Anvita.

    Hi Anvitha,
    You can try one of the following transactions:
    VE31     Blocked SD Documents
    VKM1     Blocked SD Documents
    V.14     Sales Orders Blocked for Delivery
    V23     Sales Documents Blocked for Billing
    VA14L     Sales Documents Blocked for Delivery
    Cheers,
    Bhanu

  • Report S_ALR_87012252 Issue

    Hi,
    I have 2 financial statement versions in my system.
    Note:
    ABB -  this financial statement versionwas created at the time of implementation -3 years back
    ABB1- this financial statement version was created one month back as per their latest structure
    Now the problem is -
    Report S_ALR_87012252, Financial statement Version ABB1, shows a YTD number even though I specify for a current month report. If I run the same report with version ABB, I get just a monthly total.
    Why it happening like this. Kindly help me
    Please advise me...
    Thanks
    KB
    Edited by: Emergys Corp on Oct 21, 2009 3:35 AM

    The solution that worked for me was:
    1.-Implement note 64537.  Import transport request of the change to your productive client.
    2.-Regenerate report group using transaction code GR55 using report group 6O00.
    3.-Run report S_ALR_87012993 again and it will work.
    Best regards!
    Alex.

  • Reporting annoying issues for the entire Microsoft website (MSDN, forums, all)

    Is there any place where I can report bugs with how the Microsoft web sites behave? I can only find forums and "Microsoft Answers" categories about single products that Microsoft makes, but nothing about the infrastructure itself.
    For about two weeks now, I am required to log into my account every few hours whenever I access any Microsoft website. This includes MSDN help content, forums, or other resources. I need to login after opening the website through F1 help in Visual Studio
    as well as accessing a microsoft.com link from anywhere else like a web search or a direct link from web or an application.
    Auto-complete does not work either. My browser (Firefox) does save the password, but it never fills it into the form. Other people have already noticed that
    Microsoft applies some dirty tricks here. And even if the login is remembers for a moment, it's slow as hell. It takes a second or two to load the login.live.com page (which is not what I wanted to see), then it sits there for some more seconds before going
    anywhere. Other login services like Google or StackOverflow manage to log me in all within one second and most of the time I don't even see it.
    And then there's still that insecure SSL-to-non-SSL-submit warning that only occurs in other browsers then IE. Has anybody cared about that in the last couple years?! I'm not getting it now, probably because I'm not logged in anymore. It all slowly falls
    apart, piece by piece. Next step is probably losing my data or not loading it at all.
    THIS – IS – ANNOYING! And it really makes me feel like I don't want to use Microsoft products anymore (because even good desktop applications are connected to that silly website). I have opened a
    Microsoft Connect ticket for a part of this issue (it's grown bigger since then), but this ticket is totally ignored. If microsoft.com went down, they'd certainly care within minutes or hours. This bug is not even regarded in
    weeks!
    So do I have to write a postal letter to the president of the whole company or do they have support staff for that?! Do they have anybody who is capable of maintaining their website? It's really frustrating how Microsoft has a web presence that is worse
    than what our first-year trainees come up with. It's full of bugs and this is currently only the most relevant one. Do they even care about how the world sees them? Or is Microsoft currently preparing (and even failing) to move out of business?

    The brandings are fun. Here's this same thread in a bunch of flavors:
    https://social.technet.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    https://social.msdn.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    https://social.microsoft.com/Forums/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    https://social.technet.microsoft.com/Forums/exchange/en-US/cf19ed78-267b-4313-9c49-bd3027f0eb8e/reporting-annoying-issues-for-the-entire-microsoft-website-msdn-forums-all?forum=whatforum
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • I bought and downloaded yesterday what was advertised in the App Store as bring top paid app. It was a kids game "team umizoomi" counting game. However every time I click into the game it crashes out. Who do I contact to report this issue?

    As a top paid app- a team umizoomi game. However the game crashes once opened. Can anyone shed light as to where I can report this fault?

    Contact the app developer here >  http://www.nickjr.com/home/write_to_us.jhtml
    If you don't hear by back within 2 to 3 business days, report the issue to Apple using the email form here.

  • Report to show order blocked due to customer credit limit

    Hi,
    We can set customer credit limit and if the orders exceed the limit, the order will be blocked. I need to know is there any standard SAP report showing the orders blocked (due to credit limit) and unblocked?

    Hi Paul Hawk,
    There are no standard SAP report showing the orders blocked (due to credit limit) and unblocked. But there are reports which needs some customization.
    Please see the reports
                        RVKRED06 credit check for blocked SD documents,
                        RVEXSLIB   List of all blocked partners / documents
    Regards,
    Lakshmi

  • XI R2 To 3.1 Sp2 migration and report format issues

    Hello,
    is there a way to fix or troubleshoot report format issues after migrating to 3.1?
    We have a heavy report that the format (the way the report looks) is very important. In crytal Reports 2008 sp2 the format is OK.
    But from BOE CMC or from url reporting the report format have problems.
    Thank you
    Edited by: RUHVER BARENGI on May 18, 2010 9:47 AM
    Edited by: RUHVER BARENGI on May 18, 2010 9:48 AM

    Hi Ruhver,
    Crystal Report documents are heavily dependant on the printer driver for formatting.  If you design the report using a specific default driver than it will be dependant on that printer driver for formatting.  When you publish it to Enterprise, the same printer driver may not exist so the report will be re-formated to fit the default driver on the server, or if no driver exists, it will use an internal method to format the report. 
    Try this as a test.
    1) Open your report in the CR 2008 designer.
    2) Click on the File/Page Setup. 
    3) Select the "No Printer" option.  This tells the report to use this internal method to format the report
    4) Save this document as "Title - No Printer"
    5) Export it to Enterprise
    6) Test this report again.  Formatting should be identical in BOE vs CR.
    Keep in mind that when you change the driver in step 3, the report in the designer will re-format.  You may need to tweak the report again in order for the formatting to be as desired.
    Test this out and if you require further assistance with this, I would suggest opening a message.  This is a common issue and a support engineer could likely help you with this pretty easily.
    Hope this helps,
    Jb

  • Crystal Reports localization issue

    Hi,
    I am using Crystal Reports for .NET version 2005. Also, I am utilizing SQL Server 2005 as my database server. The problem is when I deploy applications in Spanish countries (maybe others, but did not try yet). The problem happens when dates are passed to SQL Server 2005, but only through Crystal Report engine.
    I guess the question is if there is special need to localize crystal report setup?
    Thanks in advance
    Amer Gerzic
    Infinity Software Solutions

    David,
    Thanks a lot for reply!
    Here is the code that I use:
                        MachineProductionReport report = new MachineProductionReport();
                        SetReportLogOnInfo(report);
                        ParameterDiscreteValue discreteValue1 = new ParameterDiscreteValue();
                        discreteValue1.Value = dlg.MachineID; <- this has type String
                        report.ParameterFields["@machine_id"].CurrentValues.Add(discreteValue1);
                        report.DataDefinition.ParameterFields["@machine_id"].ApplyCurrentValues(report.ParameterFields["@machine_id"].CurrentValues);
                        ParameterDiscreteValue discreteValue2 = new ParameterDiscreteValue();
                        discreteValue2.Value = dlg.StartDate; <- this has type DateTime
                        report.ParameterFields["@start_date"].CurrentValues.Add(discreteValue2);
                        report.DataDefinition.ParameterFields["@start_date"].ApplyCurrentValues(report.ParameterFields["@start_date"].CurrentValues);
                        ParameterDiscreteValue discreteValue3 = new ParameterDiscreteValue();
                        discreteValue3.Value = dlg.EndDate; // <- this has type DateTime
                        report.ParameterFields["@end_date"].CurrentValues.Add(discreteValue3);
                        report.DataDefinition.ParameterFields["@end_date"].ApplyCurrentValues(report.ParameterFields["@end_date"].CurrentValues);
                        MainReportViewer.ReportSource = report;
    The issue is that it works fine in US, but not in Chile ... Everything else works though (passing string, int, etc.)
    Thanks in advance!
    Amer

Maybe you are looking for