Report Server(rwmts60) memory utilization

Please answer my below query....
1) Which parameter rwmts60 use for its memory management(To handle and create new report engines rwrun60)
2) Does it use jvm parameter from Jserv setting.
Regards,

based on note 209897.1
For Java version 1.1.8 add the following parameters to increase the memory for
the java process:
wrapper.bin.parameters=-ms128m
wrapper.bin.parameters=-mx256m
For Java version 1.2.2 or 1.3 add the following parameters to increase the
memory for the java process:
wrapper.bin.parameters=-Xms128
wrapper.bin.parameters=-Xmx256
you need to Restart the Apache Process if you changed them.
check the note
fadi hasweh
http://oracle-magic.blogspot.com/
Oracle is not Magic, it just takes years of experience

Similar Messages

Run the SSIS Package using sql server Agent--Memory utilization Problem

Hi,
I have Created one SSIS Package it was working fine in BIDS but in SQL Server Agent it takes all the server memory and server gets very slow now.
in that ssis package i am using merge join,sorting tasks.Can you please suggest me how to handle in the memory usage for this..pls refer the below screen

Hi aravindhrm,
You can enable BufferSizeTuning logging event on the Data Flow Task to get how many rows in buffer. Or you can use Performance Counter to obtain more details about the buffers.
http://microsoft-ssis.blogspot.com/2013/04/performance-best-practice-more-rows-per.html
http://www.sql-server-performance.com/2009/ssis-an-inside-view-part-3/
Then, you can tweak the DefaultBufferMaxRows and DefaultBufferMaxSize size settings.
Besides, you can also go through the blog mentioned by Visakh and try suggestions such as increase OS pagefile size.
Regards,
Mike Yin
TechNet Community Support

Oracle report server service returned service specific error 271

I setup Report 6i to start automatically as NT service in WinNT 4.0 server. Encountered the msg "The oracle report server <server name> service returned service specific error 271".
Can't find any documentations... can anyone please help? Thanks.
Joshua

Hi,
Only thing I can think of is that the User log-in may not have the priviledge to start a serice or some other OS related problem. Or check that you do not have any other service running under same name / or the same port. Workaround would be to use following command to start the Report server:
rwmts60 -listen "server_tns_name"You need to add an entry for the Report server in TNSNAMES.ORA file. Infact for first case also, please check is you have right entry in tnsnames.ora for the Reports Server service.
Thanks,
Rohit

How to display CPU and memory utilization from ST06 in a report

Hi,
I want to display CPU Utilization and Memory utilization and File sys details from ST06 transaction in a report.
Is there any function module or any other method to do that.
Please advice.
Thanks,
Sandeep.

Hi Ranganath,
Thanks for your time.
And thank you very much for the reply.
Both the function modules are helpful.
But can u also help me in getting the data of FileSys from ST06.
Thankyou,
Sandeep.

Crystal Report Server 2008 - Out of Memory in Event Server

Hi All,
        We run a Crystal report Server 2008 on a Windows 2003 Server Std Edition, with 4 GB of Memory and enough Harddisk space(C: More than 25 GB and D: around 155 GB). The Server is running with MS SQL Server 2005 and CRS 2008 on MySQL and Tomcat. Other than this there is a transactional application running using MS SQL Server 2005 which creates a new database everyday.
       We have Scheduled reports which were working fine for an year, since last month we were getting the "Out of Memory in the event Server" error and the CRS stops to schedule reports, only after restarting the server and SIA it allows us to schedule the jobs in time. But this happens every once in 2 days. Am not sure what is causing this problem. Currently there are no backup jobs running and no OS Scheduled jobs are running and also no error messages in the Application log other than the "Out of Memory in the Event Server".
       Could anyone help to sort out what may cause this?
Thanks
Senthil

Hi
I strongly believe that what you are seeing here is a bug. I would suggest to open a case by SAP support immediately (http://service.sap.com/support)
Regards,
Stratos

Memory utilization presented in Application Server Control

Hi
I have Oracle Application Server 10g R3 Patch Set 5 application server, which work in cluster. On mian page in Oracle Application Server Control I have memory column, where I can see information about memory utilization. I wonder about this information. For example, I have heap size set for 2 GB and application uses 300MB, but I have on main page Application Server Control 900 MB memory utilization for OC4J container. Why is so difference between use heap space memory (only 300 MB), and this information 900 MB? But sometimes, memory in Server Control rises to 2 GB, but application uses 300 MB heap space still. Why does occur this situation (much difference between uses heap space and memory presented on Server Control)?
Thanks awfully for help.
Regards
Edited by: Luk004 on 2012-01-16 03:30

> Central Instance : 1.2GB is physical memory is free out of 12GB.
> App1 Instance: 400MB is physical memory is free out of 10GB.
> App2 Instance: 2GB is physical memory is free out of 14GB.
>
> Right now, no background for dialog process are running in any of the three instances but still ocuupy lot of physical memory.
>
> Questions: How to calculate memory in ECC and where could be the rest of memory defined in system? No process is running and all memory seem to be consumed.
Memory is allocated
- by the operating system itself
- by the database (SGA_TARGET)
- by the application server buffers (ST02 et al)
- by the operating system as filesystem cache (if you e. g. use VxFS you may configure the memory consumption)
To see where the memory is being used, use OS tools like 'glance' or 'top'.
Markus

Generating Memory Utilization Report in HUM

Hello All,
I was trying to generate reports for devices in my network. I noticed that for most devices, the memory utilisation (no value for memory utilisation instances) was not polled though it's part of the variables in my poller configuration.
Kindly help me out on this. See the attached for more information.
Thank you in advance.

Hi,
I'll appreciate if anyone can assist with generating memory utilization report for devices in CHUM.
Thanks

Crystal Report Server 2008 V1: Memory hog?

Hi,
We installed Crystal Report Server 2008 V1 on a Windows 2003 Server that has 4GB of memory. I noticed that once CRS started, lot of memory are used. We have only two active reports on the report server. This is no other application installed on the windows server. Ultimately, it will reach to a point where 3.6 GB of memory and 3.0 GB of page file is used (according to the performance window). The system won't return the memory even I stop the Server Intelligent Agent service. Is that normal? Does CRS cause memory leak?

It is 32bit but runs on 64bit (eg. Windows) also as long as the required 32bit libraries are available on the machine.
Regards,
Stratos

Windows Server 2012 High Memory Utilization(Three Hyper-V Instance Configure in this Server For Lync)

Hello There,
Issue: High Memory Utilization in Below Scenario. Pl. See the below configuration of Win 12 Server
Pl. see for committed memory bytes . m little bit confused that about committed memory
OS: Windows Server 2012
Memory: Total 24 GB Free:1.3 GB Committed:27.6 GB
App Configure: Three Hyper V Instances Configure For Lync Server 2013
Pls provide me solution on this issue

Virtual memory system. Committed memory is the physical memory for which space has been reserved in the disk paging file. So, you are paging, which is quite common in virtual memory systems.
On a completely different topic. Lync is an application that works best on real cores. Most systems are configured by default to use hyperthreading. Hyperthreading increases the logical processor count on a system and logical processors
are treated equally. Since a hyperthread 'core' (logical processor) performs at a small fraction of a real core (logical processor), if you are running VMs that work best with real cores, it is best to change your BIOS on the Hyper-V host to disable
hyperthreading, sometimes called simultaneous multithreading (SMT).
. : | : . : | : . tim

WAP4410N Memory Utilization Reporting 100%

My network management platform flags the WAP4410N as continuously reporting 100% memory utilization. I updated to the latest code(V2.0.4.2, but the problem persists. I confirmed with the software vendor that the MIB is actually reporting 100% utilization. Has anyone else seen this symptom?

Paul,
I haven't seen any case within the support center reporting high memory utilization consistently. If you are experiencing problems with 4410 then i would give the SBSC @ 1-866-606-1866 a call. If no problem persist then it's probably just a spike at which time all units will generally spike occasionally at 100%
Jasbryan

Bad load arguments supplied when starting up the Reports Server

Dear All,
In report60\server\<filename>.ora
Following were the contents :
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
initengine=0
maxengine=1
maxidle=30
security=1
englife=50
We chnaged it to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=1
initengine=0
maxengine=5
maxidle=30
security=1
englife=50
We imideatly got result we checked it put it on live application server.
Everything was smooth but next day we got calls/email from user saying report were slow. when we checked the windows process on application server rwmts60 was occuping 50% of memory so we killed that process. We restrarted the report service but was unable to restart.Then we saw the report log as follows :
*** 2008-07-29 17:36:51 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 17:36:53 -- Server engine crashed. (Rep60_WEBDB-01)
*** 2008-07-29 17:38:18 -- Server started up an engine. (Rep60_WEBDB-01)
*** 2008-07-29 18:39:44 -- Server shutting down an engine. (Rep60_WEBDB-01)
*** 2008-07-30 09:13:19 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:15:24 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:17:29 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** 2008-07-30 09:19:34 -- Server engine cannot be started. (Rep60_WEBDB-01)
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
*** Bad load arguments supplied when starting up the Reports Server
then we changed back our ora file to
maxconnect=20
cachedir="d:\Oracle\806\REPORT60\server\cache"
cachesize=50
minengine=0
maxengine=1
initengine=0
maxidle=30
security=1
englife=50
And restarted the service which restarted suceesfully.
My question is i had changed maxengine=5 and minengine=1 on 20- JUL-2008 around 16:00 .Did this happen b'coz of this 2 parameters.
Kindly advice.
Thanking You in anticipation.
Best Regards,
Devendra

Hello Mahendraji,
Thanks for your reply.
I may ask some basic question please accomodate me.
<<$RACLE_HOME\reports\conf\apple_report.conf>>
I have Application server 9i version 1.0.2.0.0 (isuite).
I have installed in D drive
In this drive a folder d:\orcale is created.
Inside of this i don't have any folder called "reports"
i have folder called "806"
\\webdb-01\D-Drive\Oracle\806
Inside of which i have folder "report60"
\\webdb-01\D-Drive\Oracle\806\REPORT60
Inside of which i have folder "SERVER"
\\webdb-01\D-Drive\Oracle\806\REPORT60\SERVER
In which i found "Rep60_WEBDB-01.ora" , "Rep60_WEBDB-01.log" and "cgicmd.dat"
and 2 folders "CACHE" and "security".
I am confused as you said that the file name should be Rep60_WEBDB-01.CONF but i have Rep60_WEBDB-01.ora are they one and the same . If yes is the extension b'coz i have older version of 9i i.e 1.0.2.0.0 (isuite).
if no where i how i can search this .
This Rep60_WEBDB-01.ora file doesnot have parameter "engineResponseTimeOut" if i add it will it work.
Your explanation regarding "engineResponseTimeOut" is clear.
Maximum Time taken by our report is 20 minutes. But sometimes when report hangs or SQL takes more time than normal due to the environment so the max time might change to 25 or 30 minutes in such a case should we keep it at 45 minutes to avoid any unneccessary termination.
<<Note:
It is always better to run batch reports on a separate server with different engineResponseTimeOut values. Do not submit interactive and batch reports to same server.>>
If i create a seperate application server how can i send reports requested by user to batch in this seperrate server.
What should be the criteria of report to be redirected to seperate server?
What do mean by "submit interactive" and "submit batch"
My interpretation is when we click on submit query button it is "submit interactive" is it correct.
I am not clear about "submit batch"
I know there might be some silly questions but please do accomodate.
Kindly advice.
Thanks.
Regards,
Devendra Shelke

How to create the Report Server tnsnames entry

Hi
I'm trying to integrate Oracle Forms with Oracle Reports and the document says that I have to know the tnsnames.ora entry for the report server. In other versions it was created automatically but in 11g there is no configuration. How do I configure this?
Regards,
Néstor Boscán

In 11g in the opmn.xml the environment variable TNS_ADMIN is set for the reports servers; in addition to the "normal" location under $ORACLE_HOME/network/admin you have to add a tnsnames.ora in $INSTANCE_HOME/config if memory serves (just take a look in the opmn.xml for the exact location)
cheers

Crystal Reports Server 2008 dispose not closing document

Hey everyone,
I;m running some reports through Crystal reports 2008 server (no service packs) using the RAS sdk and Java.
This was working swimmingly for a while until yesterday when the server hosting the RAS and app server fell over. I tracked it down to a problem with the RAS server. The error i got in my logs was General Exception, Report SDK Exception Not enough memory for operation. I reran the process and when i watched task manager the memory being allocated to crystalras.exe went through the roof! it went from 50k to 1.8g of ram in under 10 minutes.
I tried lots of the other suggestions in here for the errors about memory that are similar to mine (increasing the heap memory etc.) and none of them worked.
One thing i noticed though is that when I run the process and watch the metrics page of the RAS server on the management console the number of Open documents does not decrease even though i am 100% totally and utterly calling .close and .dsipose after every report i open. Definitely. Ive debugged it a million times and it is calling these methods. It is successfully releasing the connections fine but does not seem to releasing the open documents. After the Open documents metric went down to 0 (im presuming after a timeout) the memory that crystalras.exe was reduced. I then changed the timeout tag in CRConfig.xml to 1 minute to see would this help out any but the open documents did not timeout any faster.
Would i be right in thinking that these open documents would be causing my problem of the aggregated memory? Im at my wits end here so any piece of help is greatly appreciated!

Hi Ted,
Thank you for getting back to me, i was on vacation there for a while so that is why i didnt get back to you.
When I call reportClientDocument.isOpen() just before i dispose of the report it is true and after i dispose of it it correclty returns false.
I am really stressing out over this as we are reduced to running 500 reports through the server (one after another) and then stopping the process and restarting the RAS server and then running another 500 reports.
crystalras.exe gets up to about 2g of ram consumed for only 500 reports.
I even changed some of the timeout settings on the settings page of the management console to see would they timeout and release the memory but alas it didnt release as much as a byte. I left it for 3 days and it didnt deallocate one piece of memory.
Im currently investigating is there some way from my code that I can restart the RAS server, either through the SDK or through a windows process or scheduled task.
Ted, as far as i can see there are no service packs for Crystal Reports Server 2008, is that right? when i go to the downloads page there only ones listed for release X1.
Thank you for your help.
J.

Report server run problem (urgent plz)

i am using developer9i, xp opereting system but i am not able to run report server . infact i dont know where report server reside and how configure report server. otn discussion forum gave me below instructions but i need step by step detail to run report server.
pls help me.
i want to see (Please reffer to Note:204538.1 on
Metalink ) but i could not access metalink.
registration does not alow me. i have no country on
country list and no Support Identifier (CSI, SAC,
Access Code etc.) . but i need access.
please help me. access with path
thanks
mostafizDear see this information this is metalink information
Note:204538.1
Subject: Common Reasons & Troubleshooting: "Unable to communicate with the Reports Server"
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 22-JUL-2002
Last Revision Date: 08-MAR-2005
PURPOSE
========
The main purpose of this document is to list the known causes of the "Unable to
communicate with the Reports Server" error. The terms Reports Server, CGI,
Reports Servlet are also described briefly for a better explanation of this error scenario.
This document includes the following sections :
I. Brief summary on the architecture of Reports Server, CGI and Reports
Servlet
II. Sources of errors encountered when running a report with Reports Server
III. How the CGI (or the Reports Servlet) communicates with the Reports
Server
IV. Possible reasons which lead to "Unable to communicate with the Reports
Server" error.
1) Reports Server is up and running
2) tnsnames.ora and sqlnet.ora problems
3) Effect of parameter "ORACLE_HOME"
4) Effect of parameter "maxconnect"
5) Passing very large parameters to reports server
6) A case specific to OAS 4.0.8.2
7) A case specific to WEBDB version 2.1.0.9.3
V. References
I. Brief summary on the architecture of Reports Server, CGI and Reports Servlet
=================================================================================
In order to understand the causes of the error "Unable to communicate with the
Reports Server", let's first briefly review the Reports Runtime Engines, Reports
Server, the Reports CGI, and Reports Servlet architecture.
There are 4 important layers in Reports Server architecture which should be
understood in order to clearly understand the error "Unable to communicate with
the Reports Server" :
1) The Runtime Engines : This is the main layer where the reports are actually
executed. On unix systems there are "rwrun60" and on NT systems there are
"rwrun60.exe" processes.
2) The Reports Server : The Reports Server recieves the job request and queues
it. When one of its runtime engines becomes available, it sends the
command line to that runtime engine for execution. On Unix systems it is
the "rwmts60" executable and on NT systems it is "rwmts60.exe".
3) The Reports CGI : The Reports Web CGI passes the request to the Reports Server.
The Reports CGI or Servlet converts the request to a command line that can be executed by the Reports Server and
submits it to the specified Reports Server. On Unix platforms this executable
is "rwcgi60" and on NTs it is "rwcgi60.exe.
4) The Reports Servlet : Its functionality and function is just the same as "Reports CGI", but it is
a program written in Java as difference to the CGI program (which is
written in C programming language).
The Reports Server may be running on the same server with the CGI program (or
servlet) OR may reside totally on another machine which does not necessarily have
the same Operating System. For instance CGI may reside in a Windows NT machine
while the Reports server may reside on a Unix box, or any other combination with
Unix-Linux-NT-2000, etc.
The reports are called with a URL similar to below with the CGI :
http://fully.qualified.server.name:PORT/dev60cgi/rwcgi60.exe?server=<REPSERVER>&other_parameters=...........
where fully.qualified.server.name is the name of the server where the Reports CGI
reside, and <REPSERVER> is the name of the server.
II. Sources of errors encountered when running a report with Reports Server
============================================================================
The Reports Web CGI (or the Reports Servlet) makes a call to the Reports Server
and asks it to place the output into some destination (defined by DESTYPE and
DESNAME parameters), then gives back the necessary response to the calling
program. For example if the DESTYPE is "cache", then the Reports server generates
the report to a file in a temporary place and gives it back to CGI and the CGI gives
it back to the calling program. Otherwise, if the DESTYPE is "file", the Reports Server
generates the report output to the requested file and the CGI replies back the
following message : "Report output was successfully written to requested
destination.".
If there is any error in this process, the related error message is returned. The
possible sources of errors can be categorized as follows :
1) The errors that are returned from Reports Server; like the Reports Server can
not find the requested RDF file or the report may be run to file and the
directory where the reports output is asked to be placed does not occur or
similar errors. (Usually the REP-XXXX errors)
2) Another possible cause of error is the errors returned by the RDBMS to the
Reports Server, for example a table not found error or things like that. Of
course from the CGI point of view these errors are again transmitted from the
Reports Server but in fact the error originates from the RDBMS. (Usually the
ORA-XXXX errors)
3) Another possible cause of errors is the CGI itself, for example when the CGI
executable can not connect to the requested Reports Server, then we get the
famous "Unable to communicate with the Reports Server". In this document we will
diagnose the common reasons of this last error.
III. How the CGI (or the Reports Servlet) communicates with the Reports Server
===============================================================================
Having said that "Oracle Reports Server CGI - Unable to communicate with the
Reports Server." error is returned back from the CGI itself, let's discuss the
issue of how the Reports CGI connect to the Reports Server. The name of the
Reports Server given in the URL with "server=....." parameter is, in fact, just
a special tnsnames alias, similar to aliases for database connect strings. As it is
important for the CGI to resolve the alias, the CGI needs to know the HOST name (or the
IP) of the machine where the Reports Server is running and the port on which the
Reports Server is listening. So a typical Reports Server alias is defined as follows :
REP60_<MACHINE>=(ADDRESS = (PROTOCOL = tcp)(HOST = <MACHINE>)(PORT = <PORT>))
This is defined in tnsnames.ora file, and the sqlnet.ora file is also used in
the name resolving operation.
IV. Possible reasons which lead to "Unable to communicate with the Reports Server" error.
==========================================================================================
The possible reasons for the "Unable to communicate with the Reports Server" error :
1) Reports Server is up and running :
Make sure that the Reports Server is really running on the specified server
and listening on the specified port. For details have a look at above
explanations for tnsnames alias of the reports server. And because of this the
CGI could not establish a connection to the Reports Server.
2) tnsnames.ora and sqlnet.ora problems :
As described above, the CGI resolves the details for the reports server using
the "tnsnames.ora" and "sqlnet.ora" files. There may be a problem with them,
here are the possible configuration problems :
a) There is no alias in the tnsnames.ora file for this Reports Server
b) The CGI looks into the wrong directory for the "tnsnames.ora" and "sqlnet.ora"
files. By default the CGI checks the $ORACLE_HOME/net80/admin directory for
these scripts, where the $ORACLE_HOME is the home of the Forms & Reports
installation. Please note that in a typical 9iAS 1.0.X installation there
are two ORACLE_HOME's, one is for the iAS and the other is for the tools,
usually the home for the tools is a directory with name "806" on NT and
"6iserver" on unix systems. By defining TNS_ADMIN in the environment, one
can override the search path for these two files.
The TNS_ADMIN variable can be defined in one of the following places :
i) In the environment : On MS Windows platforms check the "Settings
--> Control Panel --> System". On NTs check the environment TAB and in
Win2K systems check the "Environment Variables" button on Advanced tab.
ii) In "6iserver.conf" file. Details are as follows : The main configuration
file for Apache server is "httpd.conf" file which resides in
$IAS_HOME/Apache/Apache/conf directory. In this file there is a line to
include "oracle_apache.conf" and in this "oracle_apache.conf" file
there is a line to include "$ORACLE_HOME/conf/6iserver.conf" file. And
in this file the TNS_ADMIN variable could be defined as follows :
SetEnvIf Request_URI "rwcgi60" TNS_ADMIN=c:\orant\network\ADMIN
Please note that by defining it this way, the TNS_ADMIN will only be defined
for "rwcgi60" calls, so the other parts of the 9iAS will not be affected by
this setting.
c) In sqlnet.ora the "names.default_domain" is set but in tnsnames.ora the
domain is not defined in the alias description. For example if the
"names.default_domain=world" is present and active in "sqlnet.ora" file
then in the "tnsnames.ora" the alias of the reports server should also have
the ".world" extension appended at the end. And another cause is of course
the vice versa for this. If there is no "names.default_domain" is defined
in the "sqlnet.ora" then the alias in "tnsnames.ora" should not have the
domain extension.
Another important point that should be checked is, if TNS_ADMIN is defined
as described above then the search path is as follows, first the directory
defined by TNS_ADMIN is searched, if the "tnsnames.ora" file is not found in
this directory then $ORACLE_HOME/net80/admin is checked. (And on unix systems
/var/opt/oracle is also checked). These directories are only checked if the file
is not present, so if the "tnsnames.ora" file is present in TNS_ADMIN directory
but the alias is not present, then the other directories are not checked at all.
Let us assume that the tnsnames.ora file is present in the TNS_ADMIN directory but
there is no "sqlnet.ora" files here, then the sqlnet.ora file is checked in
$ORACLE_HOME/net80/admin directory, which could cause the same problem if the
"names.default_domain" is defined in this file.
All the above will result in, CGI to unable to resolve the alias in tnsnames.ora
file so it will not be able to establish a connection to the Reports Server.
3) Wrong "ORACLE_HOME" setting :
Wrong ORACLE_HOME setting. This is usually the case for Reports Servlet,
because the environment settings are defined in "jserv.properties" file for the
servlets and the setting here will effect both the Reports Servlet and the
setting for Oracle JSP and other servlets. So the other servlets or Oracle JSP
may need to set ORACLE_HOME to home of HTTP server while the reports server needs
it to be set to the TOOLS_HOME directory. In this case the best alternative is
not to set ORACLE_HOME in this directory and leave it to registry or defined the
ORACLE_HOME in "6iserver.conf" file just like the TNS_ADMIN defined above. For
details please have a look at the following document :
Note 179609.1 "Getting an error Unable to communicate with the Reports Server
using RWSERVLET"
4) Effect of parameter "maxconnect" :
Another common case for this error is that the CGI request reaches the Reports Server but
the Reports Server refuses connection. The main cause for this case is, that the Reports Server
configuration parameter "maxconnect" is defined too low, there are long running reports on the
server or the server is too busy at that time. Usually a second try some
later time results in a successful connection. If this is the case, the end user
may think that the problem is occasional. For details on this case please
have a look at the following document :
Note 125265.1 "Unable to communicate with the Reports Server"
5) Passing very large parameters to reports server :
Another known reason for this error is, if you are passing large parameters
to the Reports Server which exceeds sqlnet transmission blocks then the request may
end up with this error. To test it try with small parameter values. If you hit
this case, the solution is to increase the SDU (Session data unit size) and the TDU
(Transport unit data size) parameters in tnsnames.ora file, for details please
have a look at the following document :
Note 197358.1 "Passing large parameters to Reports show up a Reports Server
error"
6) A case specific to OAS 4.0.8.2 :
If you are using OAS instead of iAS, and the error appeared after
upgrading to 4.0.8.2 then this is caused because the 4.0.8.2 is using RSF
(Required Support Files) version 8.1.6 and the Reports 6i is using 8.0.6 and the
two could not reside in the same ORACLE_HOME directory. So the solution for this
problem is to create a new batch file and use it from which the actual CGI
executable is called. For details please see the following document :
Note 116754.1 "After applying OAS 4.0.8.2 CGI and Cartridge cannot communicate
to report server"
7) A case specific to WEBDB version 2.1.0.9.3 :
Another known case for this error is with WEBDB version 2.1.0.9.3 or less.
If you are using these old versions of WEBDB as HTTP listener, please have a
look at the following document :
Note 95426.1 "URL Not Found When Calling Oracle Developer Report from WebDB Site"

On Windows you can create a Report Services:
rwserver -install server=repserverYou have to choose different names for all servers, like your collegue cannot create a server with the same name. You can start/stop this Report server in Services (control panel). Configuration files can be found under $ORACLE_HOME/reports/conf
Martin

Crystal Report server error

I'm new to posting here, so please bear with me! I have installed, in this order, crystal report server XI R2 .Net server 2005 (used as a viewer for reports in our web application), Crystal report server XI (BO), Crystal Report XI, BO XI SP4 on Windows Server 2003 R2 running as a VM. When I first install crystal report server XI R2 .Net server 2005, open our web app and run Crystal reports, they run just fine. After installing BO XI, Crystal Reports XI and BO SP4, I get an error:
Server Error in '/ImageWorks' Application.
Not enough memory for operation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: Not enough memory for operation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0x80041004): Not enough memory for operation.]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +87
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +279
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +341
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +964
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) +73
   roi_AdminReportViewer.Page_Load(Object sender, EventArgs e) +83
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +47
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1436
Version Information: Microsoft .NET Framework Version:2.0.50727.1433; ASP.NET Version:2.0.50727.1433
I have loaded this same configuration on similar servers over the past 2 years with no issue. Can anyone help me? Doesn't look like the memory is being touched on the server, it's an IIS server with 1.5 GB RAM.

Hi Elaine,
So everything worked fine until you installed CRXI and BO R2 SP4? Let me know if the order of installation I have below is correct:
1. crystal report server XI R2 .Net server 2005
2. Crystal report server XI (BO)
3. Crystal Report XI
4. BO XI SP4
I know the .net viewer is usually set up in the Crystal Reports Server installation. I'm unsure as to why you have it listed separately.
Also which version of BO (Crystal Reports Server) are you installing (R1,R2,R3)?   Could you clearly outline your first 2 installation steps?

Report Server(rwmts60) memory utilization

Similar Messages

Maybe you are looking for