Report Services Integrated mode : Error 503 after 100 seconds

Hello,
After resolving an issue with some timeouts in shared datasets (updated value not taken into account), i am now facing another timeout (?) issue with our production sharepoint server and reporting services :
If a report takes more than 100 seconds to display, the following message is displayed on the top of the page :
"Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server.  The status code returned from the server was: 503"
The exception is triggered by the scriptmanager, but i don't know why : all the applications pool are running fine, and if i look in SSRS log, it shows that the task completed successfully !
Our development server is not affected by this strange behavior.
Is there a secret timeout switch hidden somewhere ??

Hi Raphael,
In Reporting Services, if the report server is under high memory pressure, the report server will refuse new requests until the current application domain is unloaded and a new one instantiated. While requests are refused, you will receive HTTP 503 errors.
To avoid this issue, you can add more memory, move the report server installation to a computer that has more memory, or change the memory configuration settings. For the detail information about it, please see HTTP 503 Service is Unavailable section on the
link below:
http://technet.microsoft.com/en-us/library/ms159778(v=sql.105).aspx
Besides, for the timeout issue, you can refer to the links below to troubleshooting it.
http://blogs.msdn.com/b/mariae/archive/2009/09/24/troubleshooting-timeout-errors-in-reporting-services.aspx
http://geekswithblogs.net/ssrs/archive/2009/10/30/steps-to-resolve-ssrs-timeout-issues.aspx
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

  • Reporting Service Integration mode and Key not valid for use in specified state

    I had to uninstall SharePoint Foundation 2013 and reinstall it.
    What I have done:
    I uninstalled SharePoint and after that I removed all databases.
    I reinstalled SharePoint Foundation 2013 and it completed without errors.
    Everything else is working, except SSRS in Sharepoint Integrated Mode.
    If I check Central Administration - Manage services on server, I can found out that SQL Server Reporting Service Service is
    "Started". But if I try to create new service application (SQL Server Reporting Services Service Application), it gives me an error message:
    "Key not valid for use in specified state. (Exception from HRESULT: 0x8009000B)"
    I uninstalled SSRS in Sharepoint Integrated Mode and I reinstalled it but problems exists.
    It seems that "Encryption Keys" cause this problem.
    https://support.microsoft.com/kb/955757
    https://msdn.microsoft.com/en-us/library/ms156010%28v=sql.110%29.aspx
    I tried to Re-create Encryption Keys and Delete keys, but its not working either. It gives me only error message that:
    "Unable to locate the Reporting Server Windows service for instance MSSQLSERVER."
    I don't have any reporting server databases, because I removed all
    databases when I uninstalled SharePoint. Also I don't have Encryption
    Keys backups.
    I have found several similar question but no answer, example here:
    https://social.technet.microsoft.com/Forums/ie/en-US/df02dc05-5ce8-499d-9ba3-ab392a5fc3af/sharepoint-2013-ssrs-application-error-key-not-valid-for-use-in-specified-state-exception?forum=sharepointdevelopment
    Any ideas how I can fix this problem?

    Hi,
    From the Reporting Server Configuration Manager you have to restore the encryption key.
    Please try to delete databases(reportserver & reportservertempdb) and delete the reportserver and reports site on IIS. Then you have to start over the configuration again.
    If the issue still exists, Please check ULS log to see if anything unexpected occurred.
    For SharePoint 2013, by default, ULS log locates in
    "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS"
    More information about SQL Reporting services Installation with SharePoint 2013 for your reference:
    http://expertsharepoint.blogspot.de/2014/03/sql-reporting-services-installation.html
    Best Regards,
    Dennis Guo
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • SharePoint 2013 and SQL Reporting Services Integration Mode

    I'm setting up a production environment with SQL Server 2012 SP1 (Clustered) and SharePoint 2013.
    I successfully setup the integration using PowerShell (Install-SPRSService & Install-SPRSServiceProxy). I can see the SQL Reporting Service on the CA Services and it's started, I've also created the Services Application without any issues (And linked it
    to my web application). However the Report Server Integration feature is missing from my site collection and so are the content types. I even tried creating a new site collection and no dice.
    Appreciating any help.
    Best,
    MI

    Hi MI,
    As per my understanding, I think this issue is caused by you haven’t install the Reporting Services add-in for SharePoint Products or is not installed correctly. If we install the Reporting Services add-in for SharePoint Products after the installation of
    the SharePoint Server, then the Report Server integration feature and the Power View integration feature will can be activated for root site collections. For other site collections, we can manually activate the features. To fix the issue you occurred, we should
    install or reinstall the Reporting Services add-in for SharePoint Products.
    For more information about Install Reporting Services 2012 SharePoint Mode for SharePoint 2013, please see the following article:
    http://msdn.microsoft.com/en-us/library/jj219068.aspx
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Report service Integration vs Report Service SharePointMode

    Hi,
    I see some msdn docs using the terms "RS Integrated mode" while some other msdn docs use the terms "RS SharePoint Mode".
    Are those the same thing?
    I guess it is just diferent terminology used with diferent produtcs versions RS2008/SP2010 & RS2012/SP2013.
    Am I wright or are there other considerations?
    Note: I'm not considering the RS Native mode Webparts .   

    Hi,
    Per my knowledge, the
    SQL Server Reporting Services Integration Mode is SQL Server Reporting Services SharePoint Integration Mode.
    http://www.optimusbi.com/2012/11/23/ssrs-integrated-vs-native-mode/
    As this question is more relate to SQL Server, I suggest you post it to SQL Server Forum, you will get more help and confirmed answers from there.
    http://social.technet.microsoft.com/Forums/en-US/home?forum=sqlreportingservices
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Report service Integration (sql 2012 and SharePoint 2013) error Report Server WMI Provider error: Invalid namespace

    Report Server WMI Provider Error: Invalid namespace
    Domain Server, Sql2012 server and SP2013 Server (3 vm servers)
    the sql server reporting services service application and applications Proxy are installed and started (SP2013 Sever)
    the sql server PowerPivot system Service and SQL server Reporting Services Service are Started (in Services on Server)
    in sql server 2012 sp1 reporting service configured (web service URL and Report Manager URL are configured and tested,  the database report server mode is native) (SQl 2012 Server)
    under general Application Settings .. trying to setup the "Reporting Service Integration" give us the above error message (Report Server WMI Provider Error: Invalid namespace)
    I was looking for all blogs and TechNet material but without success.

    Follow these steps:
    1) Uninstall SSRS from the Database Engine server (MSSQLSERVER instance).
    2) Install SSRS on the SharePoint server using the "Reporting Services - SharePoint" install option during SQL Feature selection, no other services are required (e.g. you do not need to install Database Engine services).
    3) You should then see SSRS as a Service Instance in Central Admin -> Manage Services on Server, at which point you can also create an SSRS Service Application.
    While this guide (http://msdn.microsoft.com/en-us/library/jj219068.aspx#bkmk_install_SSRS) walks you through it, this is for a single server install where the Database Engine is also installed on SharePoint, not something you want to do.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Reporting services integration feature not available in 2010 experience mode site collection.

    I have a 2013 SP farm with SQL reporting services 2012 configured. When I create a site collection using the 2010 experience mode, I don't see the "Reporting Services Integration" feature under site collection features. However this feature is
    available when I create a site collection in 2013 experience mode. Is there a way I can activate the "Reporting Services integration" feature in a site created in 2010 experience mode? I am not able to activate the feature on a 2010 experience mode
    site collection using PowerShell either.

    Hi，
    From your description, When you create a site collection using the 2010 experience mode, the "Reporting Services Integration" feature is missed. However this feature is available when you create a site collection in 2013 experience mode.
    For your issue, whether your 2010 experience mode site collection is in the same web application with the 2013 mode site collection. if not,  make sure the web application which contains the 2010 site collecction have been
    enabled ssrs service,
    Go to CA->Application Management->Manage web applications-Choose the web application->Click Service Connections->Check SSRS, refer to the screenshot:
    Besides, I suggest you create a new 2010 mode site collection with the same tempalte and the same web application with 2013 mode site collection, compare the results.
    Also you can upgrade you 2010 mode site collection to the 2013 mode and compare the results.
    Hope it helps. 
    Best Regards，
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • What to specfify in CA Reporting services integration (Report server web service URL) when using SSL for both SharePoint and SSRS?

    Hello,
    We are using Sharepoint 2010 and SQL Server reporting services 2008 R2.    We have the sharepoint site bound to port 443 using a certificate.   We also have the same certificate bound in the reporting services configuration manager's
    web service URL tab.    In CA should we put the SSL URL or the non SSL URL?    Right now in CA it has the then non SSL URL,
    http://fakehostname/ReportServer_REPORTSERVICE.     We have some sporadic issues and I am wondering if setting this to our SSL URL will help.    Please let me know
    if you have any questions.
    Thanks,
    Sean

    Hi,
    Regarding this issue, it should be no issue for setting (https) according :
    https://msdn.microsoft.com/en-us/library/bb630447.aspx
    https://msdn.microsoft.com/en-us/library/bb677369.aspx
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/0ada85b1-e2d2-44a8-8443-74eca74f5745/ssrs-cannot-connect-to-https-sharepoint-2010-401-unauthorized
    I notice you mentioned that you have some sporadic issues, what are these issue? If there are errors, please post the detailed information about the errors.
    What is the mode type of SQL Server Reporting Service, native mode or SharePoint mode?
    The screenshot of the web service URL:
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Service unavailable! Error 503

    Hi
    I'm in need of some help. I'm running Netware OES 6.5 SP6 and GroupWise 7
    SP2 HP
    everything is working except Webaccess. When you visit server url to view
    groupwise webaccess I get Service unavailable! Error 503. I don't know
    what else to try. I've reinstall Webaccess multiple times and also have
    apply the wsock patch as well. Please Help.

    After install Webaccess 7 and then upgrading to 7 SP2 HP it is still not
    working.
    It looks like tomcat is not loading I think.
    When loading tomcat it display the following message on the System Console.
    CATALINA_OPTS = -vm160m -Xmx256m
    -Djavax.netssl.trustStore=sys:/adminsrv/conf/.keystore
    -Dsun.io.useCanonCaches=fales
    and this on the Logger Screen.
    Module LIBPERL.NLM load status OK
    Module PERL.NLM load status OK
    Using CATALINA_BASE: sys:/tomcat/4
    Using CATALINA_HOME: sys:/tomcat/4
    Using CATALINA_TMPDIR: sys:/tomcat/4/temp
    Using JAVA_HOME: SYS:java
    java.util.zip.ZipException: error in opening zip file
    at java.util.zip.ZipFile.open(Native Method)
    at java.util.zip.ZipFile.<init>(ZipFile.java:111)
    at java.util.jar.JarFile.<init>(JarFile.java:127)
    at java.util.jar.JarFile.<init>(JarFile.java:65)
    at
    org.apache.catalina.loader.StandardClassLoader.add RepositoryInternal(
    StandardClassLoader.java:1035)
    at
    org.apache.catalina.loader.StandardClassLoader.<in it>(StandardClassLo
    ader.java:153)
    at
    org.apache.catalina.startup.ClassLoaderFactory.cre ateClassLoader(Clas
    sLoaderFactory.java:155)
    at org.apache.catalina.startup.Bootstrap.main(Bootstr ap.java:93)
    Bootstrap: Class loader creation threw exception
    java.lang.IllegalArgumentException: addRepositoryInternal:
    java.util.zip.ZipExce
    ption: error in opening zip file
    at
    org.apache.catalina.loader.StandardClassLoader.add RepositoryInternal(
    StandardClassLoader.java:1063)
    at
    org.apache.catalina.loader.StandardClassLoader.<in it>(StandardClassLo
    ader.java:153)
    at
    org.apache.catalina.startup.ClassLoaderFactory.cre ateClassLoader(Clas
    sLoaderFactory.java:155)
    at org.apache.catalina.startup.Bootstrap.main(Bootstr ap.java:93)
    java: Class com.novell.application.tomcat.util.tccheck.LDAPVer ifier exited
    succe
    ssfully
    java: Class org.apache.catalina.startup.Bootstrap exited with status 1
    I'm not sure what else to try.

  • Difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013

    Hi, We are building company site with Sharepoint 2013 Enterprise Edition and were wondering what is the difference between Reporting Services Sharepoint Mode and Reporting Services Add In for Sharepoint 2013? What are the roles/purposes of each one? What
    happens if only Reporting Services Sharepoint Mode  installed or vise versa.
    Thank you in advance

    Reporting Services in SharePoint mode is a service for displaying, managing, and creating SSRS reports within SharePoint. The addin is a pre-req for SharePoint that is used to display reports and is required for Reporting Services in Native or SharePoint
    mode, but does not by itself do anything.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Running Azure SQL database and reporting services native mode?

    I would like to stand-up a remote Azure SQL Server to do Master Data Services (MDS) and SSRS in native mode. Can this be done from one Azure SQL Server instance?
    William H. Neville Jr.

    Hello，
    Master Data Services (MDS)not supported by Microsoft Azure SQL Database.
    In order to meet your requirement, you can try to create a SQL Server virtual machine in Azure, it similar to on-premises SQL Server installed on VM. It also install the SSRS and you can try to configure the SSRS in native mode.
    To run Master Data Services in a virtual machine in Azure, you should also install the Web Server (Internet Information Services) and Silverlight, and also configure Master Data Services by using Master Data Services Configuration Tool (MDSConfigTool.exe).
    Reference:
    Reporting Services Native Mode Configuration
    Getting Started with SQL Server in Azure Virtual Machines
    Regards,
    Fanny Liu
    If you have any feedback on our support, please click here. 
    Fanny Liu
    TechNet Community Support

  • Active "Report Service Integration Feature" failed

    Hi Expert,
      I tried to reactive the "Report Service Integration Feature" from "Deactivate", but failed. system show 
    The content type with Id 0x010100C3676CDFA2F24E1D949A8BF2B06F6B8B defined in feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0} was found in the current site collection or in a subsite.
    Please let me know how to fix it.
    James Liang

    One thing you could try is (re)installing the SSRS 2014 addin on your SharePoint server(s).
    Trevor Seward
    Follow or contact me at...
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • SQL Server 2008 Reporting Services HTTP 500 error

    Hi Everyone,
    I recently tried changing authentication mode in RSReportServer.config, I changed from RSWindowsBasic to RSWindowsNegotiate. After restarting the services, I tried to access the Reports page (which worked before my change), but I was unable to load HTTP
    500 error.
    I then did what anyone else would do, revert back to the origin config and restart the services. I then tried to access but I got exactly the same error, HTTP 500.
    I really dont understand why, I have reverted back to exactly the same configuration that work.
    The error messages from the logs are as follows:
    rshost!rshost!16ec!01/16/2014-13:33:53:: i INFO: CLR runtime is initialized.
    rshost!rshost!16ec!01/16/2014-13:33:53:: v VERBOSE: Initializing Memory Monitoring
    rshost!rshost!16ec!01/16/2014-13:33:53:: i INFO: Derived memory configuration based on physical memory as 4193848 KB
    rshost!rshost!16ec!01/16/2014-13:33:53:: w WARN: Failed to initialize performance counters: ffffffff. Possible setup issue.
    rshost!rshost!16ec!01/16/2014-13:33:53:: v VERBOSE: Supported winsock version is 2.2.
    appdomainmanager!DefaultDomain!18e4!01/16/2014-13:33:53:: i INFO: Entered managed ServiceMain in DefaultDomain.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing ConnectionType to '0'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing SecureConnectionLevel to '2'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException,Microsoft.ReportingServices.ReportProcessing.UnhandledReportRenderingException'
     as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Threading.ThreadAbortException,System.Web.UI.ViewStateException,System.OutOfMemoryException,System.Web.HttpException,System.IO.IOException,System.IO.FileLoadException,Microsoft.SharePoint.SPException'
     as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing AuthenticationTypes to '8'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RSWindowsExtendedProtectionLevel to 'Off'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RSWindowsExtendedProtectionScenario to 'Proxy'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing EnableAuthPersistence to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MemorySafetyMargin to '80' percent as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MemoryThreshold to '90' percent as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing UrlRoot to 'https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing IsReportManagerEnabled to 'True'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing ReportServerUrl to 'https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing MaxConnections to '2'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing Timeout to '10' second(s) as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing AppID to '(Default)'  as specified in Configuration file.
    library!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Initializing CacheLevel to 'Default'  as specified in Configuration file.
    resourceutilities!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Reporting Services starting SKU: Enterprise
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server internal url https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server external url https://TEST-SRV-DBA01:4445/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using url root https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: AuthPersistence does not apply to basic authentication.
    rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Configuring maxPhysicalCpu=8, minLogicalCpu=0
    rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Logical processor per physical processor 1
    rshost!rshost!d30!01/16/2014-13:33:54:: i INFO: Maximum logical CPU is 1
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server internal url https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using report server external url https://TEST-SRV-DBA01:4445/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Using url root https://ssrsreportingppe.companytest9.co.uk:4434/ReportServer.
    configmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: AuthPersistence does not apply to basic authentication.
    appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:54:: i INFO: Appdomain:2 WindowsService_0 started.
    resourceutilities!WindowsService_0!d30!01/16/2014-13:33:55:: i INFO: Reporting Services starting SKU: Enterprise
    library!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Catalog SQL Server Edition = Enterprise
    appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: The UserAccountControl value for the service account is 512
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://TEST-SRV-DBA01.company.co.uk:4444/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=http://SSRSReportingPPE.companytest9.co.uk:8081/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4445/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4443/ReportServer/, vdir=/ReportServer, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer.
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4443/ReportServer/ on endpoint 2
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4445/ReportServer/ on endpoint 2
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url http://SSRSReportingPPE.companytest9.co.uk:8081/ReportServer/ on endpoint 2
    rshost!rshost!1940!01/16/2014-13:33:55:: i INFO: Currently registered url https://TEST-SRV-DBA01.company.co.uk:4444/ReportServer/ on endpoint 2
    appdomainmanager!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: The UserAccountControl value for the service account is 512
    crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Initializing crypto as user: company\adm.sukh.gidda
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://TEST-SRV-DBA01.company.co.uk:4444/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=http://SSRSReportingPPE.companytest9.co.uk:8081/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://WMSvc-TEST-SRV-DBA01:4444/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4445/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Registered url=https://+:4434/Reports/, vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportManager.
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4434/Reports/ on endpoint 3
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://+:4445/Reports/ on endpoint 3
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://WMSvc-TEST-SRV-DBA01:4444/Reports/ on endpoint 3
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url http://SSRSReportingPPE.companytest9.co.uk:8081/Reports/ on endpoint 3
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Currently registered url https://TEST-SRV-DBA01.company.co.uk:4444/Reports/ on endpoint 3
    rshost!rshost!1d44!01/16/2014-13:33:55:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\ReportBuilder.
    resourceutilities!DefaultDomain!d30!01/16/2014-13:33:55:: i INFO: Maximum memory limit is 2097152Mb
    rshost!rshost!d30!01/16/2014-13:33:55:: i INFO: Derived memory configuration based on physical memory as 4193848 KB
    servicecontroller!DefaultDomain!1d44!01/16/2014-13:33:55:: i INFO: Total Physical memory: 4294500352
    rpcserver!DefaultDomain!1940!01/16/2014-13:33:55:: i INFO: Process monitoring started.
    library!WindowsService_0!1f70!01/16/2014-13:33:55:: v VERBOSE: Transaction begin.
    crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Exporting public key
    crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Performing sku validation
    crypto!WindowsService_0!1f70!01/16/2014-13:33:55:: i INFO: Importing existing encryption key
    library!WindowsService_0!1f70!01/16/2014-13:33:55:: v VERBOSE: Transaction commit.
    library!WindowsService_0!1f70!01/16/2014-13:33:56:: v VERBOSE: Transaction begin.
    library!WindowsService_0!1f70!01/16/2014-13:33:56:: v VERBOSE: Transaction commit.
    dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: EventPolling polling service started
    dbpolling!WindowsService_0!1ef4!01/16/2014-13:33:56:: i INFO: HeartbeatThread(EventPolling): heartbeat thread started.
    dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: NotificationPolling polling service started
    dbpolling!WindowsService_0!1f94!01/16/2014-13:33:56:: i INFO: HeartbeatThread(NotificationPolling): heartbeat thread started.
    dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: SchedulePolling polling service started
    dbpolling!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: UpgradePolling polling service started
    dbpolling!WindowsService_0!1a54!01/16/2014-13:33:56:: i INFO: PollingMaintenance: Polling started
    resourceutilities!WindowsService_0!1a54!01/16/2014-13:33:56:: i INFO: Maximum memory limit is 2097152Mb
    rpcserver!DefaultDomain!1f70!01/16/2014-13:33:56:: i INFO: RPC Server started.
    servicecontroller!DefaultDomain!1f70!01/16/2014-13:33:56:: i INFO: RPC Server started. Endpoint name ='ReportingServices$MSRS10_50.MSSQLSERVER'
    appdomainmanager!WindowsService_0!1f70!01/16/2014-13:33:56:: i INFO: Appdomain:2 WindowsService_0 initialized.
    library!WindowsService_0!1a54!01/16/2014-13:33:56:: Attempting upgrade of MigrateExecutionLog
    rshost!rshost!18e4!01/16/2014-13:34:39:: v VERBOSE: AcceptCallback(): accepted new connection pipeline=0x000000000036DC50...
    rshost!rshost!1478!01/16/2014-13:34:39:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x000000000036DC50, state=0, IOError=0, node=0.
    appdomainmanager!DefaultDomain!1478!01/16/2014-13:34:49:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130343528892811172 started.
    appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: i INFO: RS authentication mode is 8; effective ASP.NET authentication mode is Windows. vdir=/Reports.
    appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Managed threadpool maxWorkerThread=100, maxIoCompletionThread=100 ...
    appdomainmanager!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Managed threadpool minWorkerThread=1, minIoCompletionThread=1 ...
    appdomainmanager!DefaultDomain!1478!01/16/2014-13:34:49:: i INFO: Appdomain:3 ReportManager_MSSQLSERVER_0-1-130343528892811172 initialized (#1).
    rshost!rshost!1478!01/16/2014-13:34:49:: v VERBOSE: Processing request pipeline=0x000000000036DC50, callback=0xace640, callback->pipeline=0x000000000036DC50, id=17077649789136404660, connid=17077649788599533747 ...
    httpruntime!ReportManager_0-1!1478!01/16/2014-13:34:49:: v VERBOSE: Response header encoding is Unicode (UTF-8).
    ui!ReportManager_0-1!1478!01/16/2014-13:34:51:: v VERBOSE: User map'<Users><User><Name>TEST-SRV-DBA01\LocalAdmin</Name><Paths><Path>/Reports/home.aspx</Path><NrReq>1</NrReq></Paths></User></Users>'
    rshost!rshost!1478!01/16/2014-13:34:51:: v VERBOSE: HttpPipelineCallback::EndOfRequest(): continue pipeline=0x000000000036DC50.
    rshost!rshost!18e4!01/16/2014-13:34:51:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x000000000036DC50, state=2, IOError=0, node=0.
    rshost!rshost!1180!01/16/2014-13:34:52:: v VERBOSE: AcceptCallback(): accepted new connection pipeline=0x0000000003631610...
    rshost!rshost!1478!01/16/2014-13:34:52:: v VERBOSE: ThreadContinuePipeline: processing request on pipeline=0x0000000003631610, state=0, IOError=0, node=0.
    rshost!rshost!1478!01/16/2014-13:34:52:: v VERBOSE: Processing request pipeline=0x0000000003631610, callback=0xace620, callback->pipeline=0x0000000003631610, id=17365880165288116379, connid=17365880164751245466 ...
    ui!ReportManager_0-1!1478!01/16/2014-13:34:52:: v VERBOSE: User map'<Users><User><Name>TEST-SRV-DBA01\LocalAdmin</Name><Paths><Path>/Reports/Pages/Folder.aspx</Path><NrReq>1</NrReq></Paths></User></Users>'
    ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: Microsoft.SqlServer.ReportingServices2010.RSConnection2010+MissingEndpointException: The attempt to connect to the report server failed.  Check your connection information and that the report
    server is a compatible version. ---> System.Net.WebException: The remote server returned an error: (404) Not Found.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.ReportingServices.UI.ServerAuthType.GetReportServerAuthentication()
       at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetNewWebRequest(Uri uri)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.SqlServer.ReportingServices2010.ReportingService2010.ListItemTypes()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.<ListItemTypes>b__10f()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
       --- End of inner exception stack trace ---
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.ListItemTypes()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.ReportingPage.EnsureHttpsLevel()
       at Microsoft.ReportingServices.UI.ReportingPage.ReportingPage_Init(Object sender, EventArgs args)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: Microsoft.SqlServer.ReportingServices2010.RSConnection2010+MissingEndpointException: The attempt to connect to the report server failed.  Check your connection information and that the report
    server is a compatible version. ---> System.Net.WebException: The remote server returned an error: (404) Not Found.
       at System.Net.HttpWebRequest.GetResponse()
       at Microsoft.ReportingServices.UI.ServerAuthType.GetReportServerAuthentication()
       at Microsoft.ReportingServices.UI.Global.RSWebServiceWrapper.GetNewWebRequest(Uri uri)
       at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
       at Microsoft.SqlServer.ReportingServices2010.ReportingService2010.ListItemTypes()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.<ListItemTypes>b__10f()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
       --- End of inner exception stack trace ---
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.MissingEndpointException.ThrowIfEndpointMissing(WebException e)
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod(Boolean setConnectionProtocol)
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.SoapMethodWrapper`1.ExecuteMethod()
       at Microsoft.SqlServer.ReportingServices2010.RSConnection2010.ListItemTypes()
       at Microsoft.ReportingServices.UI.Global.SecureAllAPI()
       at Microsoft.ReportingServices.UI.GlobalLinks.Control_Init(Object sender, EventArgs args)
    ui!ReportManager_0-1!1478!01/16/2014-13:34:53:: e ERROR: HTTP status code --> 500
    Anyone seen this issue before? Or know why its failing from the logs?
    Thanks,
    John

    Hi John,
    HTTP 500 error can occur if there are conflicting authentication settings in the report server Web.config file and the RSReportServer.config file. HTTP 500 is returned if authentication initially succeeds and then the mismatch is detected. In RSReportServer.config
    file, make sure the AuthenticationTypes setting as follows:
    <AuthenticationTypes>
    <RSWindows*/>
    </AuthenticationTypes>
    In the report server Web.config file, please also check the authentication type:
    Authentication=”Windows”
    Reference:
    http://technet.microsoft.com/en-us/library/ms159778(v=sql.105).aspx
    If the issue is persist, please check if the web services URL in web.config file is correct.
    Hope this helps.
    Regards,
    Alisa Tang
    If you have any feedback on our support, please click
    here.
    Alisa Tang
    TechNet Community Support

  • SharePoint 2010 with SQL Reporting Services 2012 "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"

    i have a small sharepoint farm "2 servers" (WFE) and SQL Server 2012 ,
    i installed rsSharePoint for reporting services , as a read the Reporting services is Application Service  with SQL 2012 not as SQL 2008 R2 with SharePoint integrated mode, so after installation when am trying to configure the  SQL Server
    Reporting Services Application services i got the below error :
    "Installation Error: Could not find SOFTWARE\Microsoft\Microsoft SQL Server\110 registry key"
    any kind of help would be much appreciated .

    I'm having the same issue, but to me it seems like the instructions I've seen are all over the place.  I already have SP 2013 and SQL 2012 SP 1 installed.  I already added the features for Reporting Services - Sharepoint and Reporting Services
    Add-in for SharePoint Products.  I didn't see the Reporting Service service in CA, so I ran the powershell scripts to add SPRSService and SPRSServiceProxy. 
    My initial quest, was to get the BI features enabled, which took me on the journey of adding the Report Services, then I got the error.
    Then when I read this about installing the BI features
    http://blogs.msdn.com/b/querysimon/archive/2012/11/26/installing-the-bi-features-of-sharepoint-2013.aspx, which I already had SQL and SP installed.  Do I have to rerun and selct the SQL Server PowerPoint for SharePoint option?  I have the PowerPoint
    Configuration Tool on my SQL server, I run it and I get PowerPivot for SP 2013 Configuranoi is missing prerequisits:  SP 2013 EE is required.  Which I have EE.
    Is Reporting Services different or in addition to the BI Feature (PowerPivot)? 
    Have I missed a step?
    Thanks for you help.
    Kim
    Kim.Williams

  • Report service doesn't to start after developer6i patching on windows OS

    Hi hsawwan ,
    I am unable to start report and apps listener service after developer 6i patching on windows platform.
    m getting below error while starting report service.
    Setting service OracleReportServer-Rep60_UAT to mode 2
    Executing service control script:
    d:\APPSORA\uatcomn\admin\scripts\UAT_diw-erpweb-01\adrepctl.cmd start
    Timeout specified in context file: 100 second(s)
    script returned:
    ECHO is off.
    ECHO is off.
    Wed 02/11/2009 08:57 AM
    Starting reports server for UAT ...
    The Oracle Reports Server [Rep60_UAT] service is starting.
    adrepctl.cmd exiting with status 2
    .end std out.
    The Oracle Reports Server [Rep60_UAT] service could not be started.
    A service specific error occurred: 186.
    More help is available by typing NET HELPMSG 3547.
    .end err out.
    Hi guys, anyone who has face this issue before please help me to get it resolved .
    Regards
    Nitin

    no sir,
    See the below text from autoconfig log .
    Starting AutoConfig at Wed Feb 11 09:04:01 2009
    Using adconfig.pl version 115.81
         Classpath : d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\jre\lib\rt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\dt.jar;d:\APPSORA\uatcomn\util\java\1.4\j2sdk1.4.2_04\lib\tools.jar;d:\APPSORA\uatcomn\java\appsborg2.zip;d:\APPSORA\uatcomn\java
    ===========================================================================
    Starting Utility to Report Version Conflicts at Wed Feb 11 09:04:02 AST 2009
    Using VersionConflictListGenerator.java version 115.2
    All driver files processed.
    No version conflict encountered.
    ===========================================================================
    ERROR: Context Value Management Failed.
    Terminate.
    The logfile for this session is located at:
    d:\APPSORA\uatappl\admin\UAT_diw-erpweb-01\log\02110904\adconfig.log

  • SharePoint Reporting Services Integration - System Settings Page Issue

    Hi All,
    A client of mine has setup Reporting Services (SQL Server 2012 SP1) integration on a SharePoint 2010 environment and this has been working fine for a while now. This includes viewing SSRS reports and also creating PowerView reports from the SharePoint interface.
    The only issue that we have is when we browse to the SQL Reporting Services service application via SharePoint Central Administration and select 'System Settings' we receive an error and can't configure any of the settings located on this page.
    Looking at the ULS logs I can see the following error is raised:
    System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.InitStrings()     at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs
    e)     at System.Web.UI.Control.InitRecursive(Control namingContainer)     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    43aaadcd-fc67-420e-a30f-2e174f151084
    I removed the existing service application and uninstalled the SharePoint Services (using Install-SPRSService). I then reconfigured the RS services and created a new service application but the error is still raised. All other pages under the service application
    can be loaded. We also tried setting the reporting services diagnostic logs to verbose but couldn't see any further information.
    Has anybody seen this before? I'm thinking that perhaps some of the configuration settings for this page actually carry a null value when it should be configured with something. Does anybody know where these settings are saved?
    Cheers,
    Tom

    Just thought I'd provide an update, we ended up resolving this, problem was related to an incorrect ID one one of the fields in ReportingServicesSystemSettings.aspx.
    Updating this to the correct ID resolved the issue. Weird thing was that the file was incorrect on more than one server, only had to obviously update it on the CA server though. After this the System Settings page opened without any problems.

Maybe you are looking for