Report Spool Printing Font Change

Hello All,
While printing the spool request created by ABAP report(ALV)  print document is not much clear due to small font , is there any technique to change the font size while printing the spool request or any technique to print horizontal line between each row into spool like vertical line between each column so that it can be understandable.
Thanks in advance.
Regards
Chudamani Gavel

In my case, I found that SAP was calculating the max line size for the printout, based on the maximum possible number of output columns, as determined from the field catalog.  That resulted in SAP setting 512 and reducing the font on landscape output to the point that a microscope was needed!  I fixed by limiting the output of some columns (splitting texts into multiple rows of ALV, along with the essential key fields), and setting my max line size to 200.  The resulting printout is small, but still readable.
layout - max_linesize = 200.
check also:
gt_print-no_change_print_params = 'X'  (of type slis_print_alv).  "don't allow SAP to change what is set in job or in background submission

Similar Messages

  • Increasing the font size of an ALV report while printing it.

    The requirement is to increase the font size of an ALV report while printing it. The ALV Report is coded using the Factory method.
    I could find a class called CL_SALV_ITEM with a SET_FONT method but I am not sure how to link it with the CL_SALV_TABLE class from which the display table has been created. I even tried checking the report display in SPOOL transaction SP01.But I guess the font shown there depends on the SAP GUI settings.
    Do you have any suggestions?
    Thanks and regards
    Sathya

    The status bar is a fixed fontsize which does not change. While I have no problem reading the time off the status bar you should also have the time on the lockscreen and/or glance screen with a much larger font so I do not really see the issue.
    I have all my music on SkyDrive so would not know for sure, but check out THIS to see if it serves your needs.
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Font Changing in report

    hi all
    i want to change font in drill down or interactive report how can i change is it any function available ?
    help me

    hi Muthu,
    Check ..
    Re: How to increase font size in report  list display & while printing
    way to increase font size in reports. ???
    Regards,
    Santosh

  • How can I print a LabView report using the printer font (not a windows font)?

    My printer is connected via a com interface. For speed reason I have to use the font of the printer. I use the report generation VIs to generate my report. With the VI "Set Report Font.vi" its possible to choose a font but I think only windows fonts are accepted.
    Printing from "WordPad" using printer fonts is no problem, just select font "15 CPI" for example. But how does it work with LabView?

    Have you already tried this in LabVIEW? What results did you receive when you tried it?
    J.R. Allen

  • In SAP 4.6c In classical reports output how to change Font size and Font type

    Dear Experts,
    In SAP 4.6c, in classical and interactive reports  output how to change font size and font type.
    Regards,
    Zaker.

    These are HTML formatting questions. Nothing to do with the Oracle SQL and PL/SQL languages.
    With old-style HTML, the font size and family are set using the font tag.
    With modern style HTML, that is done using cascading style sheets (CSS).
    Your favourite search engine will turn up tons of information on both.

  • Printing font Barcode3of9 from Crystal Reports XI

    I have an issue with printing font Barcode3of9 from Crystal Reports XI utilizing Manhattan Associates Performance Management (PM) UI application.
    The font is applied to a field that is converted from a number to a text using the CStr formula in Crystal Reports XI in order to display the value as a barcode.
    The barcode on the report is converted successfully in the PM UI 100% of the time.  However the business tries to print the report using the print or the export the report functions and the barcode is not converted 100% of the time into a barcode only the value of the field displays.
    The font is installed on the server that the business accesses and I have installed the font on the web server for our testing environment, but it still does not aide with fixing the issue.
    Does anybody have any experience with this issue?
    Thank you

    Please contact Manhatten Assoc. for supporting their software.

  • Can't change printing font at Entourage

    I don't know why but I can change the font for printing out emails from Entourage. I have tried to change the printed font in the perferences menu and used diff fonts and sizes, but no effect at all...
    Any idea ?

    If a received or sent message was composed in HTML, have you tried changing the message to Plain Text first?
    When you print a note or an HTML-format message, Microsoft Entourage uses the font and font size specified in the item, not the default settings you choose in the Preferences dialog box.
    Plain text messages print in the font and font size that you specify in the Preferences dialog box, regardless of how they appear on your screen.

  • Changing print font in mac mail

    How do I change the print font in mac mail? Changing it on the screen makes no difference at all

    Is there a way to add styles to that menu, so can do the following?
    Format > Styles > My Custom Style 1
    Format > Styles > My Custom Style 2
    and maybe even assign key shortcuts to the above selections?
    Thanks,
    Jeff

  • Change Maintenance Work Order Detail Report in Print WO page

    Hello,
    I would like to ask you for your help. We would like to have different report in Print WO function than Maintenance Work Order Detail Report. I mean SSM responsibility > Search for WOs > click Print WO icon. We applied patch #9871500 (I found it there: Templates associated to datadefinitions other than 'EAMWRREP' are not shown in the Work Order Detail report in EAM [ID 1209703.1]). I did personalizations steps - I defined new data definition (for example TEST) and report with data definition TEST is shown in the option on Print WO page now... But how should I it define to have correct result? What should be defined in Executable, Concurrent Program, Data Definition and Data Template? I have RDF and RTF files for this report. We are using different SQL than it is used in the original report. How could be used our SQL defined in RDF?
    Thanks, Regards,
    Jitka

    Hi,
      1) You can choose to select and Print shop paper when you need.No enhancement is required.
    2) There is not an option in standard to say Print/Not print Long text . You will have to replace the standard form with a custom form and build the logic to print /Not Print long text based on your rules.
    Regards
    Narasimhan

  • Printer fonts not maintained

    Hi,
    A batch job has failed with the error "No printer fonts maintained for ARCHIXOS"
    ARCHIXOS is the device type. However instead of ARCHIXOS being called, it should call device type ZSWINCF, where all the fonts are maintained.
    The job calls program RM06ENDR_ALV. This program is used for printing and archiving purchase orders.
    1) What changes should I do so that the job does not fail again?
    2) How can I rectify the already existing PO's which are refering to the wrong device type?
    Any help would be greatly appreciated.
    Thanks and Regards,
    Mick

    Mick,
    Following is the procedure we are using to configure and test MICR printer and it's devices:
    I hope this will help you to understand the config stuff.
    1. <b>Font verification</b>
    Once the SIMM/DIMM or Secure Font Module is installed, print the PCL Font List (through the printer control panel) to verify that the module was installed correctly and to verify the escape sequence of the fonts.
    2. <b>Creating custom device type</b>
    Once it is confirmed that printer is capable of printing MICR font, we need to create custom device type for this printer.
    •     Execute  transaction code “SPAD”
    •     Select “ Full administration” button to expand all available options
    •     Select “ Device Types ” tab
    •     Type “HP5MI” for  Device types  and press Display 
    •     Press “ Change” button
    •     Go to Utilities -> For device types -> Copy device type to ZHP5MI.
    •     Edit Print Control for the new device type ZHP5MI.
    •     Scroll down to Print Control for MICR E-13B 10pt which is SF450. (This is device specific)
    •     In the “Control Character Sequence” column, enter the hexadecimal escape sequence for the MICR E-13B 10 point of the printer. (This is printer/hardware specific).
    The value for current printer hardware is: 1B28384D1B28733070382E30356831302E30763073306231303054
    3. <b>Creating new output device</b>
    •     Execute  transaction code “SPAD”
    •     Click on  “ Change” button
    •     Click on “Create” button
    •     Enter an output device name as “ Accounting check printer”
    •     Enter newly created device type (ZHP5MI)
    •     Select default spool server
    •     Select host spool access method as “c: direct operating system call”
    •     Enter host printer as share print name on server (accounting)
    •     Save the setting.
    4. <b>Test MICR font printing</b>
    •     Execute transaction SO10
    •     Select SAP script “SAPSCRIPT-MICRTEST”
    •     Click on display
    •     Initiate print for displayed text
    •     Check out if MICR font is properly printed.
    Regards,
    Amey

  • Generate Report with fixedsys font

    Hi, I created a report with fixedsys font , it works fine with oracle 6i but when converted to application server 10g the font change to Ariel and I can not make it appeare as fixedsys.

    As long as the font is on your system and it is licensed for embedding, you need to embed the font in the PDF. That is set within the job.options. Typically the print and press job options will embed all fonts. Standard will embed most. Smallest-file-size embeds no fonts as I recall.

  • Report Rendering (Print & PDF) trashes report that looks fine on screen

    Since installing SQL Server 2012 SP2 CU3 (11.0.5556) a number of reports look fine on screen but when printed or exported to PDF the format is totally altered so that either many blank lines are inserted between lines, or lines are squashed together. It
    doesn't affect all reports. Reports (both affected and not affected) use Tablix with both Row Groups and Column Groups. There is no obvious consistency between those reports that are affected.
    All of our SQL Server instances are hosted on VM-Ware virtual servers.
    I've raised the issue via Microsoft Connect: https://connect.microsoft.com/SQLServer/feedback/details/1063641/report-rendering-print-pdf-trashes-report-that-looks-fine-on-screen
    Any thoughts or workarounds? Is this a bug?
    Thanks!

    Hi nsam,
    We installed the sqlserver 2012 sp2 cu3 in our lab, but unfortunately the issue cannot be duplicated, so I provided the following options for your reference.
    1),Please help to provide a way with detail steps to duplicate the issue.
    2),If you don't know how to duplicate the issue, please try to remove the sqlserver 2012 sp2 cu3 update by the following steps to see if the issue can be fixed.
    In Control Panel, open the Add or Remove Programs item.
    2. Click Change or Remove Programs .
    3. To see all the updates for the SQL Server 2012 installation, click to select the Show Updates check box.
    4.Uninstall the cumulative hotfix package.
    3,)Please visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone

  • Crystal Report XI Print report on different paper size (A4/Letter)

    Hi,
    I have designed report in Crystal XI using paper sieze Letter. Multipler sites are using this application. User in USA are using Letter size paper and User in Euorpe are using A4 size paper. All reports work fine for USA users.
    When Eurpoe users print the report on A4 size paper which set in Letter size, the report is truncated from Header or footer. They are printing report from Application and application is set on Citix server.
    If Anybody have any idea how to setup Crystal report so it can print on any paper size?
    Thanks
    Bhagvat

    Hi Don,
    Please find the below description.
    Background: Crystal Report XI is utilized to develop and view reports with data source from Oracle based LIMS application (Vendor: LabWare). The reports are printed using network printer on US Letter paper for users located in North America and on A4 paper for users located in Europe. The report format is US Letter and designed to print on both paper formats i.e. Letter and A4.
    Issue: When reports are printed by users in Europe using A4 format paper the printer defaults to US Letter paper (in printer preferences) resulting to data cut off from top and bottom on the printout.
    1)      When report layout is select to A4 during developing reports using CR, the printing preferences changes to A4 when printed and vice versa for Letter format. How can we avoid CR to enforce from changing printing preferences?
    2)     According to Citrix engineers in the company, the printer drivers installed on Citrix servers have nothing to do with printing preferences and CR defaults to paper size based on report design. What do we tell them about doing different to resolve this issue?
    3)    Even though a printer preference of default printer on local desktop is changed to A4, the report gets printed to Letter format result in data cutoff.  We have tried this option with several HP printers from few different company locations.
    Thanks
    Bhagvat

  • SAP should retrieve print preferences in a Crystal report before printing

    I would like to submit an enhancement... or a "come back" of something that was working fine before.
    Missing functionality referring to message #88318 opened at the end of January 2011
    Version: 8.8 u2013 PL18
    Description of requirements:
    Automatically select the appropriate page layout in SAP B1 when the page layout has been saved in a Crystal report.  So, the user wonu2019t have to change his u201CPrint preferencesu201D in SAP before printing a document with a different layout.
    Valid as of: N/A
    Business needs: (Please describe the impact on your business, if the functionality is not realized)
    Any people who has to print a report doesnu2019t want to always think about what should be the layout of this specific report and then have to change it in B1 before printing. This is a loss of time, more over when the layout has been saved in the u201CPrint preferencesu201D of the report itself (for example, 8½ X 14 or Landscape) so the user should not have to manually select it in addition.
    The print preview is correct in CR and in B1 but then, when sending the preview to the printer, the printing is not correct.  It is not on the same format.
    Examples: (Please describe a typical example, how the functionality should work.)
    I have a Crystal Report saved in 8½ X 14 format.
    I preview it within Crystal Report --> Ok
    I send it to the printer via Crystal Report --> Ok
    I preview it within SAP --> Ok
    I send it to the printer via SAP --> THIS SHOULD BE PRINTED THE WAY IT IS PREVIEWED
    Current Workaround: (Please describe the workarounds you are using at the moment)
    The users have to change their print preferences in B1 before printing the report !  This is a loss of time !
    Proposed solution:
    SAP should take in consideration the printing preferences saved in Crystal, so it will print the report accordingly to the print definition, using the appropriate tray. Since the print preview is okay, it should print that way.
    This was working fine in 8.8-PL11u2026

    Thank you for your reply. It works in this specific report.
    But we have both PLD and Crystal Report in the system, changing the settings means the PLD will lose their watermark...
    Also, I don't know how the Draft is displayed, but when select Print Preview for Draft, it's asking for parameter (DocEntry), which I have setup a DocKey@ in Crystal Report and set it in the Selection Manager. Does SAP provide DocEntry in Draft Invoice (ODRF) the same way as in Invoice (OINV)?
    Thanks,
    Grace

  • ABAP list report wont print on Z device type with Z format

    Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
    "Sort criteria         AscdgDescndSubtotalGRAND  TOTAL  :               X                X     PROJ" "
    The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
    I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
    We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

    No comments

Maybe you are looking for

  • Connection to MySQL via ODBC not working

    Hello all together, I've got a problem with the ODBC connection to MySQL. The connection via ODBC is established and things like tnsping are working. When I select some data within the SQL*Plus environment, I get no real result. For example "select t

  • How do U get icloud to appear in the finder

    in Mountain Lion you can save text edit files to the icloud. How do I get iCloud to appear in the sidebar in Finder. On icloud only iwork is displayed for files.  I usedropbox and it looks just like any other folder in Finder. Does iCloud behave the

  • Read a text file before knowing the encoding

    Hi, I've wrote a AppleScript to adjust time delay of *.lrc file(txt file but different extension).I only got a messed up text, in other aspect, it works well. I understand applescript read the text file using the wrong encoding, but I can't just set

  • Total number of (own) post in profile?

    I'd like to know how many posts I have made here. Cold you please add an entry to my profile main page (where is see my points too)? For me there is no need to hide this property from other users but someone may not whish to show this to the world...

  • Data Upload error!

    Hi, While uploading hierarchy from flat file, i got the following error: 'Syntax error in template RSTMPL9C, Row 80' i checked the 80 th row in falt file, it is just normal as like any otehr record in flat file. may i know what is this error and why