Report Title problem

Hi,
For a program, i have 2 transactions made for it.
I want to set the title of the report( at time of selection screen) which we set in the program's attribute to be changed on the basis of the transaction.
ex:
if tcode = 'ZMD1'
title = "Quarterly Pay"
else
title = "Annual Pay"
Please make note that i dont want to change the title of the output that comes, but rather the title of the program when we run it.
thanx in advance

put a check as
if sy-tcode = 'TCODE1'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN END OF BLOCK b1.
endif.
if sy-tcode = 'TCODE2'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
SELECTION-SCREEN END OF BLOCK b1.
endif.
u can giv 2 diff headings in text-001 and text-002.
reward points if the abv helps....

Similar Messages

Report title displaying for the secondary list

Hi All,
I have done a report interactive.The basic list is ALV and the secondary list is normal report.The problem in secondary list is it is diplaying the title "Dynamic list display" I am not getting from where this text is picking up and displaying .The code is as shown below.
LEAVE TO LIST-PROCESSING.
write:/ 'converting spool to pdf'.
The output is displaying as shown below.
dynamic list display.
converting spool to pdf.
I dont want to display dynamic list display in the output.How to suppress this?I even observed in debug mode after leave to list-prcoessing it is going to next line converting spool to pdf.
Regards
Mahesh

use
TOP-OF-PAGE DURING LINE-SELECTION.
when ur SY-LSIND
trigger this event with whtever heading u want in secondary list

'Report a Problem' is not working at all on my iMac. What do I do?

I'm running Mac OS X Version 10.5.8, 3.06GHz Intel Core 2 Duo, etc...
I have not been able to use the Problem Report interface for over a month.
No matter what software the problem is with, no matter how strong my internet connection is, I get a dialog saying "Submission failed: Your report could not be submitted. Please try again later." For example, here's a screencap from 1 minute ago, after Spotify crashed.
The same thing happens with Apple software as well as third-party. I have no idea what to do.
Any help will be much appreciated.
-S.

StefanoBlack wrote:
None of this is the point though. I don't care about reporting the problems, I wanna know why my computer is having errors rendering a very basic function impossible. Hard drive problem, data corruption, mystery Mac virus...my concern is that this is a symptom of something bigger.
That's good to know, but keep in mind that your original posting complained solely about "Report a problem not working." That was the issue in the title and text of your original post. Several people responded with regards to that concern that you raised, and indicated that not being able to report back to Apple was not a serious concern, we don't think Apple is using that data much and may have turned off some of the reporting paths back to the company anyway. As Pondini said, if you are really concerned about some other problem, describe it so people here might address it. You mention "Hard drive problem, data corruption, mystery Mac virus ..." but provide no details except that the report back to Apple failed, about something. A report back to Apple failing to go through is not evidence of any of those things you mentioned, it's actually seen pretty often.

Display Report Title line in Printer Queue Again

Post Author: ShowMeTheName
CA Forum: General
Hello, this is my question:
How can I get our Crystal Reports XI printed from our VB application to show again the line u201CCrystal Reports + The Report Titleu201D in the printer queue?
We first started generating reports with Visual Studio 2003 and Crystal Reports for VB.Net. Months later, we upgraded to Crystal Reports XI Developers Edition.
When we built our application in VB and CR for VB.Net (v.9?) and printed reports from it, they showed the Crystal Reports line with the report title in the printer spooler. Now that we upgraded to CR XI DE and compiled our program, the reports only show the line u2018Documentu2019 in the printer spooler. The report title is gone.
Does anyone know how to get that report title back? If we open a report in the Crystal Reports program and we print it from there, we do get that line u201CCrystal Reports u201C and the Report Title in the printer spooler. However, when we print the same reports from our VB application (and whatever upgrades installed by CR XI), the report title is replaced by a very annoying u2018documentu2019 word.
We need the report title to show in the printer queue to distinguish our reports.
In our VB app, we open the reports as a new ReportDocument and then we print them with the PrintToPrinter code.
Has anyone else had the same problem? Do you guys think that if we replaced the new report references with the original version will do the trick?
We donu2019t want to change or eliminate the u201CCrystal Reportsu201D words because I know we canu2019t. What we want is that line back so it can show the report title. I certainly like that line better than the u201Cdocumentu201D one we get now.
Thanks for your help!

Post Author: emoreau
CA Forum: General
as per http://technicalsupport.businessobjects.com/cs/forums/3054/ShowThread.aspx, it doesn't seem to be possible.

How to add a filter/selection into the report title?

Hi experts,
Currently I try to fugure out how to set up a field into the page header (title) of a report in order to dynamically adapt the title to selected filter criteria. I tried to use the Reprot Filter Summary, but since I do have several sheets in my reports the information given through it is not applicable.
What I would like to achieve is that the end user can select e.g. a category X and Y and the title says: "Report title - categories: X,Y" Somthg like this. I'd appreciate any tips.
Best regards

Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards

Urgent: regarding ALV report display problem

hi,
There are 3 problems:-
1.) I had made a ALV report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as PERIOD :- _______ to _______ on alv report ..
2.)the 2nd problem is dat when i use the ' wa_fieldcat-no_zero = 'X'. It eliminates all the leading zeros which are present which is okay when i it displays material no.. but the problem is dat it also deletes the other fields where the values are to be zeros.
i had used this FM:-
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
   INPUT = ITS1-MATNR
   IMPORTING
   OUTPUT = ITS1-MATNR.
so that only matnr field are to be 0's.
3.) I want to delete the rows which use to contain the values 0's as there are no calculations are performing as these are displayed .
ANYbody having solution of this problem ,plzzzz provide the soluion of it as it is most urgent to me and dat person will definately rewarded.
regards,
ric.s

hi kiran,
thanks for ur response. here is d code which i am using it and plzz help me to figure out where i have to make changes:-
REPORT ZTEST03.
TABLES: ISEG,MARA.
TYPE-POOLS : SLIS.
INTERNAL TABLE FOR INVENTORY STOCK *****************
DATA: BEGIN OF ITS1 OCCURS 0,
      MATNR LIKE ISEG-MATNR,
      MEINS LIKE ISEG-MEINS,
      MENGE LIKE ISEG-MENGE,
      WRTZL LIKE ISEG-WRTZL,
      BUCHM LIKE ISEG-BUCHM,
      WRTBM LIKE ISEG-WRTBM,
      WERKS LIKE ISEG-WERKS,
      BUDAT LIKE ISEG-BUDAT,
      MTART LIKE MARA-MTART,
      ITEMDESC LIKE MAKT-MAKTX,
      DIFFQTY LIKE ISEG-BUCHM,
      DIFFVALUE LIKE ISEG-WRTBM,
      END OF ITS1.
data: t_heading type slis_t_listheader.
SELECTION-SCREEN BEGIN OF BLOCK PAR1 WITH FRAME TITLE TEXT-001.
*********PARAMETERS*********
PARAMETERS : PLANT LIKE ISEG-WERKS OBLIGATORY.
*********SELECTION SCREEN OPTIONS*********
SELECT-OPTIONS : R_DATE FOR ISEG-BUDAT,
                 M_TYPE FOR MARA-MTART,
                 IT_M FOR MARA-MATNR.
*********DEFINING VARIABLES*********
SELECTION-SCREEN END OF BLOCK par1.
TOP-OF-PAGE.
     PERFORM PG_HEADER.
START-OF-SELECTION.
SELECT DISTINCT A~MATNR A~MEINS A~MENGE A~WRTZL A~BUCHM A~WRTBM A~WERKS A~BUDAT B~MTART
   FROM ISEG AS A INNER JOIN MARA AS B ON B~MATNR = A~MATNR
     INTO CORRESPONDING FIELDS OF TABLE ITS1 WHERE B~MATNR = A~MATNR AND B~MEINS = A~MEINS AND A~WERKS = PLANT AND A~BUDAT IN R_DATE AND B~MTART IN M_TYPE AND B~MATNR IN IT_M.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
   INPUT = ITS1-MATNR
   IMPORTING
   OUTPUT = ITS1-MATNR.
SORT ITS1 BY MATNR.
DELETE ADJACENT DUPLICATES FROM ITS1 WHERE MENGE = 0 AND BUCHM = 0.
LOOP AT ITS1.
     ITS1-DIFFQTY = ITS1-MENGE - ITS1-BUCHM.
     ITS1-DIFFVALUE = ITS1-WRTZL - ITS1-WRTBM.
     SELECT SINGLE MAKTX FROM MAKT INTO ITS1-ITEMDESC WHERE MATNR = ITS1-MATNR.
     MODIFY ITS1.
ENDLOOP.
PERFORM PRN_SMSTOCK_ALV.
WRITING DATA FROM D TABLES**********
FORM PG_HEADER.
WRITE : 'PHYSICAL INVENTORY AUDIT REPORT             PLANT : ', PLANT.
ENDFORM.
*&      Form PRN_SMSTOCK_ALV
      text
--> p1        text
<-- p2        text
form PRN_SMSTOCK_ALV .
data: w_title   type lvc_title,
      w_repid   type syrepid,
      w_comm    type slis_formname,
      w_status type slis_formname,
      x_layout type slis_layout_alv,
      t_event    type slis_t_event,
      t_fieldcat type slis_t_fieldcat_alv,
      t_sort     type slis_t_sortinfo_alv.
refresh t_fieldcat.
refresh t_event.
refresh t_sort.
clear x_layout.
clear w_title.
perform set_fieldcat2 using:
1 'MTART'     'MTART'     'MARA' '15' space 'MATERIAL TYPE'        space space space space space space space space SPACE t_fieldcat 'L' 'C',
2 'MATNR'     'MATNR'     'MARA' '13' space 'MATERIAL NO. '        space space space space space space space space SPACE t_fieldcat 'R' 'C',
3 'ITEMDESC' 'MAKTX'     'MAKT' '25' space 'MATERIAL DESCRIPTION' space space space space space space space space SPACE t_fieldcat 'L' 'C',
4 'MEINS'     'MEINS'     'MARA' '5'   space 'UOM'                  space space space space space space space space SPACE t_fieldcat 'C' 'C',
5 'MENGE'     'MENGE'     'ISEG' '13' space 'ORG.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
6 'WRTZL'     'WRTZL'     'ISEG' '13' space 'ORG.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
7 'BUCHM'     'BUCHM'     'ISEG' '13' space 'PHY.INV.QTY'          space space space space space space space space SPACE t_fieldcat 'R' 'C',
8 'WRTBM'     'WRTBM'     'ISEG' '13' space 'PHY.INV.VALUE'        space space space space space space space space SPACE t_fieldcat 'R' 'C',
9 'DIFFQTY'   'MENGE'     'ISEG' '13' space 'DIFF.INV.QTY'         space space space space space space space space SPACE t_fieldcat 'R' 'C',
10 'DIFFVALUE' 'WRTZL'     'ISEG' '13' space 'DIFF.INV.VALUE'       space space space space space space space space SPACE t_fieldcat SPACE 'P'.
x_layout-zebra = 'X'.
perform set_top_page_heading using t_heading t_event.
perform set_events using t_event.
w_status = ''.
w_repid = sy-repid.
w_comm   = 'USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program       = w_repid
      it_fieldcat              = t_fieldcat
      i_Callback_top_of_page   = 'Top-of-page'
      is_layout                = x_layout
      it_sort                  = t_sort
      i_callback_pf_status_set = w_status
      i_callback_user_command = w_comm
      i_save                   = 'X'
      it_events                = t_event
      i_grid_title             = w_title
      tables
      t_outtab                 = ITS1
    exceptions
      program_error            = 1
      others                   = 2.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ENDFORM.
FORM set_fieldcat2 USING
      p_colpos p_fieldname p_ref_fieldname p_ref_tabname
      p_outputlen p_noout
      p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
      p_hotspot p_showasicon p_checkbox p_edit
      p_dosum
      t_fieldcat TYPE slis_t_fieldcat_alv
      P_JUST
      P_FTYPE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-no_zero = 'X'.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-hotspot = p_hotspot.
wa_fieldcat-checkbox = p_checkbox.
wa_fieldcat-icon = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set output length.
IF NOT p_outputlen IS INITIAL.
    wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
    wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
    wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
    wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
    wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
    wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
IF NOT P_JUST IS INITIAL.
    WA_FIELDCAT-JUST = P_JUST.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
    wa_fieldcat-input     = 'X'.
    wa_fieldcat-edit     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
======================== Subroutines called by ALV ================
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
form top_of_page.
call function 'REUSE_ALV_COMMENTARY_WRITE'
     exporting
          it_list_commentary = t_heading.
ENDFORM.
form set_top_page_heading using t_heading type slis_t_listheader
                                t_events type slis_t_event.
data: x_heading type slis_listheader,
      x_event   type line of slis_t_event.
Report title
clear t_heading[].
clear x_heading.
x_heading-typ = 'H'.
x_heading-info = 'PHYSICAL INVENTORY AUDIT REPORT'.
append x_heading to t_heading.
Plant Name
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'PLANT: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
Posting Date
*clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'POSTING DATE: '.
x_heading-info = ITS1-BUDAT.
append x_heading to t_heading.
Control Date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL No: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
Control date
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'CONTROL DATE: '.
x_heading-info = its1-werks.
append x_heading to t_heading.
User who is running the report
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'User: '.
x_heading-info = sy-uname.
append x_heading to t_heading.
Date of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Date: '.
write sy-datum to x_heading-info.
append x_heading to t_heading.
Time of execution
clear x_heading.
x_heading-typ = 'S'.
x_heading-key = 'Time: '.
write sy-uzeit to x_heading-info.
append x_heading to t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-form = 'TOP_OF_PAGE'.
append x_event to t_events.
endform.
form set_events using t_events type slis_t_event.
data: x_event   type line of slis_t_event.
endform.
plzzz help me out as it is most urgent to me.
regards,
ric.s

Logo seen in report Title is not properly alligned when downloaded to Excel

Hi All,
Iam facing an issue with Download to Excel link on my OBIEE report.
When I download my report to Excel which has a logo in the report title, in the excel sheet the logo occupies all the cells till the end of the report columns and my report title is seen after those columns.
Can you please suggest a solution or a workaround for this.
Many Thanks in adavnce.
Suman
Edited by: Suman B on Sep 20, 2010 4:10 AM

hi
Suman
i am also faced same problem. if u got any solution for this post
let me know
Advance Thanks
Satya

Session variable reference in report title.

Can someone suggest me a answer for my problem?
I want to display the report title by with the logged in username. So, I've created a report and in the 'Edit View' of 'Title'view of that report, i just placed '@{NQ_SESSION.user}' in the Sub title section. But instead of displaying user name in the report subtitle, i have it displayed '@{NQ_SESSION.user}'. Can someone tell me where am doing wrong?

I Apologize stijn. I should have done that!! Will do it from next time.
The thread you referenced have 2 ways:
1.@{biServer.variables}
2.@{session.serverVariables}
I have tried with both like @{biserver.user} and @{session.user} placing them inthe report title view. These 2 doesnt work and giving me the same old result- displaying the same code!! :(
Am i doing any wrong here in referencing the variables??
Daan,
I followed the John's like and it was not helpful either!! :(
Actually, John was referencing it through column and later hiding that column. Am not sure which column to select here. So, i took one column and applied the formula and hide that column. But, its throwing error saying that the valueof{session.user} doesnt exist!!
Since am new to this technology, can you guys guide me?

Report Title as a link or not.....

Good morning,
I am a new user to Business Object, not an IT professional....
I created a Crystal Report with specific parameters on it. I then forward ot our BO team for them to upload to the BO portal... I can click on the report title (blue font) and it will launch the report without any problem. When i go to someone else computer, we log in BO as a different user with the same security level and the report is not a link... (black font), in order to get the report i basically have to click on schedule and then run from there.... Is this a local cpu setting in IE that need to be change or is it some settings in BO that must be change for that specific user ???? Same applied to other people as well....
Any help would be really appreciated as we are tryign to promote this system and it seems difficult to get it going....

In BusinesObjects Denied will always take prsidance.....
do one thing....get loggd to CMC as administrator and then go to the report and click on its rights...in that section slect advacd right and grant view rightto the specific user and turn of the inheritance and the ask the user to loging to infoview and ry to view hte report again
chers,
CrystalSAP

Changing BW report title

Dear all expert,
My user request me to change the BW report title. I changed the description at Query Properties, but when i run the report, the title still remain as old title, but if i refresh the query, it will only update the query title to the new title.
Can i know how to solve this problem.
Thank for help.

Hi Mate,
You better dont disturb that query which you want to changes the desc. better you copy the query to a new name in query designer. and execute the new one.Assign points if it is useful.
good day.
Thanks and regards
Arun

TS1702 I don't understand how the report a problem process works

I was advised by an app support team member that I need to report a problem on their app to get my money refunded. The purchase was an in-app purchase for an upgrade to MVP in the Mapmyride app.The mapmyride support said that thre is a bug in their app tha will not allow such in-app upgrade. I went to my itunes account and picked the report a problem button and nothing happened. I expected it to go farther to ask me what the problem was and there was nothing. Is there more for me to do to get my money refunded for this purchase? my purchase was on 3/28 in the mapmyride app. Thankyou.

There are two ways in which drop zones are available in the Keynote title template. What Luis has shown you is the normal way in which a title placed over a clip shows you the original clip with the title text. That is called a Final Cut placeholder type of drop zone. Keynote also offers a drop zone to be used as a background choice instead of a gradient or solid as you see in Luis's post. This makes a very nice title effect as you can use any clip for that background. That is what I thought you were refering to when you you said drop zone. Keynote is one of the nicer titles we have available in FCP because of this feature. Glad you got it sorted out.

Dear Apple Support, Good day to you. This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1.. After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to resto

Dear Apple Support,
Good day to you.
This is to report the problem i encountered when i updated my Ipad mini to the new IOS 8.1..
After the update my Ipad restart and after that it appears a picture that need to connect to itunes and need to restore. So i connect it to itunes and wait to restore my ipad mini because it is not opening.
After restoring it my ipad is now opening and it is like new that i need to set up again.
I set up again until i reach the apple id and password.
I put my below apple ID and password to unlock my ipad but it didn't work. The message i receive is "the apple ID cannot be used to unlock this Ipad.
What will I do? Please help.
Thank you
Sent from my iPhone
Begin forwarded message:
From: Apple <[email protected]***>
Date: October 9, 2013 at 11:53:53 PM GMT+4
To: ****
Subject: Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini
Dear Leslie J.,
Your Apple ID was used to sign in to iCloud and iMessage on an iPad mini named “Leslie Joye's iPad”.
If you have not recently set up an iPad with your Apple ID, then you should change your Apple ID password. Learn more.
Apple Support
<Email Edited By Host>

1. It is never a good idea to include personal info like your email address or Apple ID in a post on an open forum.
2. The email you received DOES NOT say your Apple ID cannot be used to unlock this iPad. The email informs you that your Apple ID was used to unlock an iPad. Fortunately the iPad is yours. The message confirms that. If your Apple ID was used to unlock an iPad that was not yours your would then know to change your password. Since the iPad is yours you do not need to change your password.
Is your iPad working?

How can I report a problem with downloading?

I purchased a rather long album and halfway through downloading it gave me the message, "We could not complete your istore request. The network connection timed out. Error 8003." The only guidance it offers is to check the network connection. Nothing wrong there. Now I can get into the store and the balance of the album no longer shows up under downloads, just old stuff that really shouldn't even be there. I went into my account, and under purchase history clicked onto "Report a problem." All I got out of that is the same page minus the report a problem button.
I'm frankly sick of this iphone and all the problems I've encountered with their upgrade failures, but this disappearig report a problem just tells me they really don't want to hear from you and no one is minding the store.
Any other places to report a problem? Or advice onto how to get the missing songs?
Thanks., I've just spent the last 1-1/2 hours on this board and going back and forth in the istore and am very frustrated.

Click here and fill out the form for assistance.
(35548)

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Sub Report Performance problem

Our current software configuration is Microsoft SQL Server 2008 R2 (10.0.2531.0) where our data is housed. Our User Interface is Microsoft Visual Studio 2008 (Visual Basic) and Microsoft .NET 3.5 SP1 platform. We use Crystal Reports 2008 (12.0.0.683) to do our reporting.
We upgraded from Crystal Reports XI and our reports are taking a long time to render?... Is there any evidence of other companies experiencing this trouble? Are there any degraded performance issues when moving from XI to 2008?
In some cases we utilizing a small simple sub report.
Any help appreciated. Thanks.

Hi Billy,
Subreports in detail sections are never a good idea. Example, you have 100 records returned int he main report and if that field is your subreport link it causes the subreport to run 100 times. Your database is being queried 101 times.
Also, the default time out for database is typically 1 minute, could be you need to verify your report and database so CR can "clean up" any wrong pointers.
It's always better to do the data collection server side if and when possible, after all that's what they do best.
Not much detail to go on so I can't say if it's a report design problem other than the above or not. It could be also that .NET takes time to load all of the CR assemblies so depending on how you have your app configured depends on the delay. If you load a dummy report when your starts up to pre-load CR runtime then subsequent reports will be much faster.
Also check off all of the Verify Database options, you may be telling CR to verify each time which on big databases can cause a delay also.
Thank you
Don

Report Title problem

Similar Messages

Maybe you are looking for