Report to show gr and ir status

Hi Consultant,
Any report which can show if the PO already made migo and miro.
I need report to check PO which already migo but yet to do miro.
Any such report?
Thanks

Key report is MB5S,MR11
Other reports are ME2N,ME2L,ME2M,ME2C,ME2K,ME2S etc.,,Here use
Selection parameter 'WE101' for open Goods receipt,'RECHUNG' - open invoices.

Similar Messages

Help with report that shows Year and Last Year

Hello!
I want to view in a report some KPIs (Rows) and Years(Columns) but I want a specific report with a prompt, I mind, at top of my dashboard there is a Year prompt that it contains (2001, 2002, 2003….,2010) and I want to see in a report when I chose in prompt 2008 for example that my report shows me 2008 Year and Last Year (2007) and another column that indicate Diference between these years. Is that possible? Can u explain me the process to get it?
Thank you very much!

If you get access, create a duplicate of the Measure you wish to use in the Business Model.
Once you have a duplicate rename to say $ Revenue Year Ago and then from the properties of the Measure, General click on Use existing logical columns as the source.
Then select function>Time Series> Ago
Ago has 3 inputs, select the column you want to base the measure on, the TIME SERIES Dimensions for year, and then 1 for 1 year ago.
So your formula will look something like:
Ago("Human Resources"."Fact - Absence"."# Days" , "Human Resources"."Time"."Year" , 1)
Save this and copy into your Presentation layer available for use.
Hope this helps

Report that shows managers and his/her Employees

Hello All,
Is there any standard report that shows the list of managers and his employees.
Eg:
Report should like below
ManagerObjID EmployeeObjid
When I enter a position of a manager it should give managers and employees belonging to that position.
Thanks
Venkat

hi,
u can that details from HRP1001 table.
or u can use function module RH_STRUC_GET .

Transaction or report for showing partitions and total amount in BW 3.5?

Hello,
I want to fulfill a unicode conversion of a BW 3.5 system and found out, that this system has some tables with plenty of table partitions (700-1200). To calculate the table splitting it would be very helpful if there is a transaction or report where I can enter the name of a table and the result will be the amount of partitions and the calculated sum of all partitions including the header table.
Does this exist in a SAP BW 3.5 system?!
If not, are there useful alternatives?
Thanks in advance

Hey you two,
Yes, I know already DB02 and I used it to show a list with object type "TABLE PART*". But then, I get a list of ca. 4900 table partitions. I just want to have a list looking like:
/BIC/B000637000 155 Partitions 106,0 Gb Whole Size
I don't want to know the partitions themselves, but the amount and the header table - and of course the whole size. Is that also possible with DB02?

Standard T-code of Fix Asset report which shows Quanity and Value

Hi friends,
Is it any T-code in SAP which shows Fix Asset with quality and value.
regards
Hemant Maurya

Hi,
All standard SAP asset reports show values for Eg.S_ALR_87011990. To display quantity you may create a sort variant with quantity as one of the fields through S_ALR_87009120. You can then run the above report i.e. S_ALR_87011990 with this sort variant to display quantities also along with values.
regards,
Swati

Report on Material / Stock and Invoicing Status

Hi Friends,
Is there any report by which we can find out for particular material , there is no Stock available but Invoicing ( MIRO ) is pending ( material for which GR is open for invoicing but Stock is NIL)
Pls help urgently.
PS

hi
go to me2n
here u can choose scope as ALV
and execute
u will get the report for pending gr quantity ,value, pending invoice quantity and value
regards
kunal

Table/ Report that shows GR and PO

Are there any tables or reports that give all the GR documents for a PO? and Is there any way to reverse or cancel a GR document?

hi,
1. You can check at table EKBE - puchasing doc history in tcode SE16...
2. At PO history tab in the respective PO..
3. At trnsaction ME87 - aggregate PO history...
You can cancel / reverse the document from MIGO transaction with the reference of the last material document...
Hope it helps..
Regards
Priyanka.P

Product costing report to show stock and the split of the activity types

I Have Production orders with, 2 activity types. Tjhe controlling user wants to see a report with the prodcued parts values and the labour and overheads for each part, even if there is a split to the CO product. On the CO reports on the activy line there is no part number populated.
1. Is there a standard report that I can use for this or
2. How can I get the material number populated on the activity type line items?

Use COOIS for Production order....COOISPI for Process order.
Internal order - KOB1
Look after all the Layouts available....if not satisfies, go for Custumization
Tables - AUFK, COSP, COSB
Thanks

Dimension only query to show manager and employees in one row

Hi Gurus,
I am creating a dimension only report. This report will show managers and their direct reportees. Since one manager can have several employees working under him, I am getting one row in the report for each employee. But our end users want employees to appear as comma seperated value for the manager. Thus each manager will have one and only one record in the report
Current
======
Manager Employee
M1     E1
M1     E2
M1     E3
Expected
=======
Manager Employee
M1     E1, E2, E3
Env : OBIEE 10.1.3.4 & Oracle 10.2.0.3.0
Thanks for your help in advance

Google ask Tom for string aggregation - there is a listagg equivalent available there, create on your DB then follow the same principal as the listagg / evaluate example.
regards,
Robert.

Need to create alv report to show pan card number.

Hi,
I need to create alv report to show employee and vendor name , number , Pan card number .This is for hr module.
could any one tell me table and fields for this and how I can relate them with foriegn and primary key.
Regards,
Moderator Message: Do your own work
Edited by: kishan P on Oct 5, 2010 10:38 AM

Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

Service tickets - User and system status

Hi guys
This is the scenario, there was a complaint raised by our resolver groups saying that they were unable to open any service tickets logged through to them from our Contact Centre Agents. All this happened in a space of 5 hours only
Under the Header Overview of these service tickets, when I view the changes to this document, i saw that every service ticket that was logged user status shows CLOSED and system status shows COMPLETED
Please advise what could have caused this?
Ravi

Hi Arden
Went through a few of those cases and picked up this
The last system status entered shows TO BE DISTRIBUTED - by the Interaction Agent user
Responsible Group deleted - and new value shows the new responsible group
But the time frame bewteen the old value and new value is what concerns me. Theres a gap of about 45 minutes on average from the time the case is logged "open" till the time the case is "in process" by the resolver
But as per the resolver groups, they could not access these cases once they were logged. So it seems these cases were all "locked" basically and could only be access minutes later
Ravi

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Generate report to show all users and groups in Shared Services in EPM 11x

Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~Adeeba

Yes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba

Report to show "# of Lead" as per status

Hi,
I am trying to create a report to show "# of Lead" as per status from Reporting Subject area. i.e.
like below
Assigned to >> #lead = Qualified >> #lead = Converted etc.
How can I achieve this without using analytics sub area. Thanks.

hello Abdillahi Jibril,
if you want to show 2 activities per year create a group on the year and don't remove your existing group if you've got objects that you need in the group. move the Year group up to the top level.
then right click on the activities formula and choose to Insert a Summary and choose a Minimum. insert the summary at the year group level. now go back to your Group Sort Expert and choose the top n for the new minimum summary.
if that's not what you're looking for, please provide a mockup of what you're looking for.
-jamie

Need a report on delivery status and response status for capaign recipients

hi, i need to make a report on delivery status and response status for capaign recipients but cannot find them in the campaign subject area nor the campaign response subject area, any idea?
thanks

Correct the Campaign Response History is the report you are looking for. The fields that may be helpful to you are.
Response status - This shows message opened, click-thru's, opt outs etc
Delivery status - Hard bounce, soft bounce etc
To get more details from the above results add the following.
Response type - This will show the URL that was clicked on a click-thru in case you have multiple links tracked in one email. It will also show the reason for hard bounces. This is important because not all hard bounces will trigger the "Never Email" flag to be checked. This occurs for emails with the bounce statuses of Bad Address,
Address Moved or Unknown Address only.

Report to show gr and ir status

Similar Messages

Maybe you are looking for