Report to show workbook, worksheets and owner
Hi,
I need to be able to produce a report to show all of the workbooks stored on the db. I need to be able to list the owner, workbook name and the sheets.
I have been looking at Eul_user_queries but there is way too much data there for what I need.
Any help would be appreciated.
Thx
Dennis
You can find the workbooks and owners in the EUL5_DOCUMENTS table. The worksheet information is stored in the DOC_DOCUMENT long raw column. This column is encrypted, so it is impossible (so far, many have asked and tried, but no one has succeeded) to get worksheet details.
You may also be able to get worksheet details from the EUL5_QPP_STATS table. That has information about all workbooks and sheets, but a worksheet needs to have been run to be included here.
Another way would be to use the EUL5 business area (ORAHOME_FOR_BI_TOOLS/discoverer/EUL.eex). Import that BA (if you haven't already), and it may be easier to manage the EUL_USER_QUERIES data.
I may have a query using QPP_STATS, but it will be a while before I can find it and post it.
Similar Messages
-
Generate report to show all users and groups in Shared Services in EPM 11x
Hi,
Is there any way to generate a report (like a migration report or job status report) which can be generated through workspace/shared services 11.1.1.3 so that my admin can look at all the users and groups created. Something that I can view and probably print out? Any suggestions?
~AdeebaYes, I knew this one. This basically shows me the users and groups assigned specific provision access. Is there any way to view a report that shows which users and groups have access to dimensions of an individual planning application?
~Adeeba -
Do we have the report to show PO Price and invoice actual price
Dear Guru,
I'm finding the report to show PO Price and Actual Price after invoice.
The actual price is mean that we may have other debit/credit price as subsequent posting in MIRO.
So we would like to compare PO price and actual Price.
Please kindly advice.
Thank you very much.
Best Regards,
SaiyaHi,
Please check ME81N --> Order value analysis.
SAM
Edited by: Saminathan Gopalan on Jul 22, 2010 6:05 PM -
Budget Report to show the fixed and variable split for Materials
Hello Gurus,
Could you tell me if there is a budget standards report that will show the fixed and variable split for Materials? Example: Labor, Equip., QC and Overheads?
I need it for the correctly rolled-up 'final material number' step. The report that does this now (without fixed and var split) is the Indented BOM Comparison (sret - cost mgmt-product costing - cost mgmt-customized reports - cost estimate comparison - costed multilevel compare rpt - Indented BOM Comparison).
Thanks,
Jeffersonone simple way is in your final itab declare a slno type i field
data : begin of itab occurs 0,
slno type i,
<other fields>
end of itab.
after filling the data in itab.
loop at itab.
itab-slno = sy-tabix.
modify itab.
endloop.
in fieldcatalog also you have to define that slno field as the first column.
but it will change its order if you are sorting the output or filtering the output.
regards
shiba dutta -
Need a report that shows sales shipments and billing by date
We need a report that will show sales shipment and billing information by date. Specifically, we need to find orders that were shipped in one month/period, but were not invoiced until the next month/period. Does a standard report exist?
I dont think it is possible. You will have to customize.
For list of deliveries, you can use VL06O.
For billing due list, you can use VF04.
Regards,
GSL. -
Report that shows the PO and PR number for each FI doc # of invoice posting
Hi
I want a report in SAP for PO and PR no. for each FI doc.
Thanks & RegardsThere is no standard report. Through development or BI.
-
Linking to an OBIEE report without showing the user and password
Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
NuriaHi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp); -
Report to show open PO and all AP Invoices
Hi all!
At this moment I have two reports that my customer asked.
One shows all open PO by cost center and project and goes like this:
SELECT T2.PrjName, T1.Project, T0.OcrCode 'Centro de custo', sum(t0.LineTotal) 'Total', T1.Docstatus
from POR1 t0
INNER JOIN OPOR T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN OPRJ T2 ON T2.PrjCode = T1.Project where (T1.Project > '0' or T0.OcrCode > '0') and t1.Docdate > '[%0]' and t1.docstatus='o'
GROUP BY T2.Prjname, T0.OcrCode, T1.Project
The other shows all AP invoices (open and close) by cost center and project:
SELECT T2.PrjName, T1.Project, T0.OcrCode 'Centro de custo', sum(t0.LineTotal) 'Total', T1.Docstatus
from POR1 t0
INNER JOIN OPOR T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN OPRJ T2 ON T2.PrjCode = T1.Project where (T1.Project > '0' or T0.OcrCode > '0') and t1.Docdate > '[%0]' and t1.docstatus='o'
GROUP BY T2.Prjname, T0.OcrCode, T1.Project
Now what the customer wants is one report showing this information, so he can see the totals of open PO and all invoices by project. He wants the docdate too. Is this possible? And showing the totals by project or by cost center.
Thank you all.
Kind regards,
Pedro SantosHello Gordon,
Thank you for your answer.
You're right, the second query was not the right one.
Here it is, the query with the AP invoices by project/cost center:
SELECT T2.PrjName, T1.Project, T0.OcrCode 'Centro de custo', sum(t0.LineTotal) 'Total'
from PCH1 T0
INNER JOIN OPCH T1 ON T1.DocEntry = T0.DocEntry
INNER JOIN OPRJ T2 ON T2.PrjCode = T1.Project where (T1.Project > '0' or T0.OcrCode > '0') and t1.Docdate > '[%0]'
GROUP BY T2.Prjname, T0.OcrCode, T1.Project
About the total and the docdate on the same report, I had a colleague helping me with that and he made it. It's not perfect but it serves the customer's needs. If you want I can show you the query.
Regards,.
Pedro Santos -
Report to show open orders and valuation type
Hi,
Is there a report in SAP that shows the open orders and the valuation type of the materials in those orders?
thanksHi jay,
What is the definition of Open orders according to your company?
Is it Sales orders created but not delivered? or
Is it Delivery created for the Sales order but not done PGI? or
Is it Sales orders but not billed?
Accordingly you must decide. Just VA05 will give list of orders where you can take from the Status updation whether it is delivered or not. But apart from that, if you need any report relating to Open orders, you need to develop a Z report which will help your company. Just ask your business user how he wants. Based on that you can decide.
Thanks and regards.
Augustine Ponraj -
SSRS- report builder showing recent sites and server as blank
Hi All,
A client of ours when executes Report builder is not able to see Report models as report builder just gets open but do not create connection to server.
We have done the following settings for same:
Used both name and IP of system and added the same to Trusted Sites in IE settings
Also we have used port number along with URL for report builder.
We have given all rites to user on reporting services (SQL)
But it is still not showing report models.
Kindly help us. It is very urgent.
Thanks in advance
-Regards
KumudHi Kumud,
According to your description, your client can't see the created report models in Report Builder. Right?
In this scenario, the reason why the client can't see the report models because he doen't connect to report server. Please click the
Connect at the left bottom of Report Builder and type the report server url manually to reconnect the report server.
If the connection is failed, please check if there any process on client side which occupies the port for report server URL. Here are two articles for your reference to do troubleshooting.
Report Builder 3.0 error : Connection Failed. Unable to connect to the server that is specified in the URL
Connecting to Report Server
Since the Semantic modeling language (SMDL) report models are deprecated. Although you can you continue to use existing report models as data sources in SQL Server 2012 or later version Reporting Services reports you should consider updating your reports
to remove their dependency on report models.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
Report that shows STO's and quantity issued and opened quantity by document
Dear friends ,
does anyone knows if exist any report in SAP that shows me all STO's and the respective quantity issued by STO ?
We need to analyse all STO's issued since Jan 2008 till now and if possible including Batch information.
best regards,
AleHi,
Try with T.code MB51.
Enter the appropriate movement type and dates, then execute.
Regards, -
Reports builder shows startup screen and hangs...
hi all.
my reports builder does normally start when i double click its icon, and shows the welcome splash screen. but then nothing happens anymore. the process is being shown in the task manager, but nothing more.
i installed some oracle 6.x applications AFTER the installation of iDS90200, so might this be the problem?
thank you for your help.
JoshHi Joshua,
This depends on your environment, so very difficult to pin-point the problem. However, you can check your system PATH to make sure it points to the iDS JDK directories, eg,
D:\Oracle\iDS10g\jdk\jre\bin\classic;D:\Oracle\iDS10g\jdk\jre\bin;D:\Oracle\iDS10g\jdk\jre\bin\client;D:\Oracle\iDS10g\jdk\bin;D:\Oracle\iDS10g\jlib
Navneet. -
EWA reporting: Not showing User Activity and Transaction Activity
Hello everyone!
Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
But 1 of them showing User activity = 0 and no Transaction activity also.
Any ideias to solve it?Hi Daniyar,
I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
Regards,
BASIS. -
Query for report to show Invoices, Payments and Discounts
Hi All
I am hoping someone can help me with this query.
What the customer needs is the invoices for a specific date range, the payments applied to the invoices and the discount amount
Eg...
Invoice payment discount
100 90 10
This would be easy to get from the ORCT and RCT2 tables.
However, sometime the users add the payment on account and reconciles the invoices and a manual journal for the discounts.
So it would be best to look at the OITR and ITR1 tables?
This is what I have so far and it almost balances...
I am using this query to create the report in crystal,
To create the discount amount from the incoming payment window i said (T0.ReconSum - T3.TrsfrSum)
I also took out the vat amount within that formula.
With the amounts from the manual journal, i just took the amount as is.
select T2.CardCode, T2.CardName, T0.SrcObjTyp, T0.SrcObjAbs, T0.ReconSum, T3.TrsfrSum, T4.ReconDate, T2.U_FundedNonFunded, (T5.Debit - T5.Credit), T6.PymntGroup
from ITR1 T0
inner join OCRD T2 on T0.Shortname = T2.CardCode
left outer join ORCT T3 on T3.DocEntry = T0.SrcObjAbs and T3.CardCode = T0.ShortName
inner join OITR T4 on T4.ReconNum = T0.ReconNum
left outer join JDT1 T5 on T5.TransId = T0.TransId and T5.ObjType = T0.SrcObjAbs and T0.ShortName = T5.ShortName
inner join OCTG T6 on T6.GroupNum = T2.GroupNum
where T3.DocDate <= getdate() or T5.ContraAct = '1127331'
the account 1127331 is the Discount GL account.
Based on the example the Payment + discount = Invoices
however not all the customers are balancing..
any ideas? it looks like my query is getting only the invoices where a payment has been done. The amounts just dont seem to match.
Thank you
Jerushahi
I think your join with OJDT is wrong in this part : T5.ObjType = T0.SrcObjAbs
you should write
T5.ObjType = T0.SrcObjTyp
(I think you don't need this part at all )
try this:
select T2.CardCode, T2.CardName, T0.SrcObjTyp, T0.SrcObjAbs, T0.ReconSum, T3.TrsfrSum, T4.ReconDate, T2.U_FundedNonFunded, (T5.Debit - T5.Credit), T6.PymntGroup
from
ITR1 T0
inner
join OITR T4 on T4.ReconNum = T0.ReconNum
inner
join OCRD T2 on T0.Shortname = T2.CardCode
left
outer join ORCT T3 on T3.DocEntry = T0.SrcObjAbs and T3.CardCode = T0.ShortName
left
outer join JDT1 T5 on T5.TransId = T0.TransId and T5.ObjType = T0.SrcObjTyp and T0.ShortName = T5.ShortName
inner
join OCTG T6 on T6.GroupNum = T2.GroupNum
where
T3.DocDate <= getdate() or T5.ContraAct =
'1127331'
please let me know if it works now
shachar -
Production Report - Reference BOM, PO BOM and Actual Consumption
Hi everyone,
I´m looking for some standard report that shows the quantity and cost based on the Bill of Material and the actual quantity consumed in Production Order.
When the production order is created, the BOM is copied to the order, but the materials and quantities could be changed before production.
Reports like KOC4 compares the actual consumed quantity with the planned quantities from Production Order, not from the original BOM.Hi Fabio
There is no such standard report in my opinion. You can develop it based on below logic
1. Read bom number from Prod order
2. Read components of bom from STPO table
3. Actual qty consumed can be fetched from LIS tables like S03* or from mseg/mkpf or Corp
Br. Ajay M
Maybe you are looking for
-
Assign a Javascript variable value to a ABAP variable
Hi, I wish to assign a javascript variable value to a ABAP variable. Any ideas how to do that? Many thanks. Rgds, Bernice
-
Please somebody help me with this
1.1 modify the application so that: i) Information about any foreign key constraints for the selected table is displayed eg as additional labels in the table editor window, or in a separate dialog window. You can choose how you wish to display this i
-
I am very new to Photoshop (4 days), having just purchased Elements 10 (I was not told that Vers 11 was available and for the same price!!!!!). Yesterday I started a new project and loaded a photo. The photo was of a phone cord and was taken against
-
Does Adobe Reader Touch for Windows 8 support forms with auto calculation?
I'm using a preformatted form that contains auto calculations. When I use it on Adobe reader 11 on my laptop, it works. However, when I use the Adobe reader app for windows eight the auto calculations do not work. Is there anything I Can do?
-
I developed some processes on a page. On day all the process had been gone! Is this possible? Did somebody had the same problem? I had the same problem on an other page. One day they had been gone and now I can see them on the page again. Stephan