Report Viewer fails in IE11

I installed IE 11 yesterday and now all my SSRS reports do not display in the viewer. We are using url to access reports on our report server and when the report tries to open it sits on the spinning wheel and never displays. It worked perfect
under previous IE versions. Thanks.

Hi Dlchase89,
In general, we can troubleshoot the issue through considering IE compatibility and the security settings. First, if it’s the compatibility issue of Internet Explorer, please switch to Compatibility View mode, and run IE as administrator. Secondly, if it is
the security settings issue, please refer to the steps below:
1. Click Tools -> Internet options.
2. Switch to the Security tab, click Trusted sites, and then click Sites.
3. Clear the "Require server verification (https:) for all sites in this zone" checkbox, and add
http://<ServerName> into the trusted sites list.
4. Click Close.
Finally, launch the Internet Explorer as administrator to browse the report again.
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

Similar Messages

Crystal Report Viewer fails for browser versions =10

We're using the Crystal Reports for VS2010 SP2 and get the following error when trying to generate a report in Firefox 10.0.2 and Chrome 18.0.1025.11 beta-m:
[NullReferenceException: Object reference not set to an instance of an object.]
   CrystalDecisions.Web.ViewerGlobal.get_IsNetscape6Up() +88
   CrystalDecisions.Web.CrystalReportViewer.Render(HtmlTextWriter output) +83
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
   System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +208
   System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +173
   System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +31
   System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +53
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +40
   ASP.app_filters_reportviewer_aspx.__Render__control1(HtmlTextWriter __w, Control parameterContainer) in c:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\qfmui\10eb2bd5\d0d0d3a5\App_Web_e2fg2prg.2.cs:0
   System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +109
   System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) +8
   System.Web.UI.Page.Render(HtmlTextWriter writer) +29
   System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) +27
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) +8991378
   System.Web.UI.Control.RenderControl(HtmlTextWriter writer) +25
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +3060
If I change the user agent string in Firefox to that of Firefox 7.0.1 everything works as expected, this implies there is some logic in get_IsNetscape6Up() which is failing because the major browser version as reported by the user agent string is two digits instead of one.
We encountered a similar issue for our legacy pages containing Infragistics 2007 controls but were able to fix that by overriding the System.Web.Configuration.HttpCapabilitiesBase.BrowserCapabilitiesProvider and faking the browser version to 9.80. Crystal Report Viewer is apparently not using .Net's built in HttpBrowserCapabilities object, is there anything else I can adjust to stop the viewer failing?

hello Robert
Today must be my day. I already got a reply from PM (normally it takes a "bit" longer...). Anyhow, here is what he said:
With Firefoxu2019s release cycles, I donu2019t think weu2019ll be able to officially support the latest versions
of Firefox at every service release. We do our best to test the released versions of Firefox
that align with our releases. I donu2019t know the details but Iu2019ve heard there is a plan in place where
the support team(s) (?) will test the most recent releases of Firefox with whatu2019s currently
shipping by SAP and log bugs as necessary.
(umm, this is my - Ludek note here ) -> news to me re. support doing QA... find out something new every day. Anyhow, continuation of the message from PM:
The current plan for CR for VS2010, the SP3 release (expected in April) will support up to
Firefox 9. If there are reproducible bugs in Firefox 10 (or higher), then please enter a bug
and escalate and it will be investigated for the next available release.
I'll revisit this once SP3 is out there and do an escalation for Firefox 10 - ok?
- Ludek

Report Viewer 2012 and IE11 Height

I have a reportviewer control (local report) in a .ASPX page. When I test this page on IE11 the browser is ignoring the height that I give the control. I'm not trying to make the height of the report 100% or anything, I'm setting it to a
static value of 500px.
In all other browsers, including IE10, it works as expected (the report is 500px in height and I see a scollbar on the right). In IE11, it's as if I didn't set the height at all.
I've placed this report into a blank .ASPX page (to eliminate the possibility of some conflicting CSS from my master page). I've tried changing the values for AsynchRendering and SizeToReportContent as suggested but it does not help. I'm running
the latest version of the reportviewer distributable. Has anyone else had this issue?
FYI, If I use the IE Developer tools I can find a deeply nested DIV (inside of the DIV that has my 500px height) whose height is set to 100%. If I change that manually (using the dev tools) it makes the report behave as expected. I
could override the height of that div using CSS but the div's name (generated by the reportviewer control) is generated dynamically and this solution would fail eventually.
UPDATE
Viewing the page in Compatibility View fixes the height issue, but is not a viable solution for the site in which the control needs to reside.

Hello, do you have find a fix because I've the same problem for my users
We had upgrated from IE9 to IE11 and we are problems with scroll.....

Crystal Report 10 and Visual Basic 6 - logon failed in crystal report viewe

Guyz,.
Report viewer is showing logon failed, pelase help me, i can able to view the data from rs1(recorset).
please hellp me to fix this issue, i need to pass the sql query to my pre designed Crystal report which has all the field as same as SQL query.
Please suggest me if any other alternate way to do this , my code is below.
Environment : Crystal Report 10, Visual Basic 6
cr_preview -> CrystalActiveXReportViewer
RepName -> Fiename and path of the Crystal report is designed from Crystal Report Designer.
Function show_rep(Sql As String, RepName As String)
Dim crystal As CRAXDRT.Application
Dim report As New CRAXDRT.report
Dim rs1 As New ADODB.Recordset
    If rs1.State Then rs1.Close
    rs1.Open Sql, cn, adOpenStatic, adLockReadOnly
    Set crystal = New CRAXDRT.Application
    Set report = crystal.OpenReport(RepName)
    report.DiscardSavedData
    report.Database.SetDataSource rs1
    'cr_preview.Refresh
    cr_preview.ReportSource = report
    cr_preview.Visible = True
    cr_preview.ViewReport
    Do While cr_preview.IsBusy
        DoEvents
    Loop
    cr_preview.Zoom 100
    If rs1.State Then rs1.Close
    Set rs1 = Nothing
Set crystal = Nothing
Set report = Nothing
End Function

Hi,
Please refer to the link for the list of example, [click here|http://pscode.com/vb/scripts/BrowseCategoryOrSearchResults.asp?optSort=Alphabetical&lngWId=1&B1=QuickSearch&txtCriteria=crystalreport+10&blnWorldDropDownUsed=TRUE&txtMaxNumberOfEntriesPerPage=10&blnResetAllVariables=TRUE]
Regards,
Clint

Export from Crystal Reports 2008 viewer fails if run on separate thread

I have a windows desktop application written in Visual Basic using Visual Studio 2008. I have installed and am trying Crystal Reports 2008 to run a report. Everything seems to work well except that when I preview a report (using the viewer control) and click the export button found in the upper left corner of that control, I get the following message:
Error 5: Current thread must be set to single thread apartment (STA) mode before OLE calls can be made. Ensure that your Main function has STAThreadAttribute marked on it. This exception is only raised if a debugger is attached to the process.
I am a little confused on what to do exactly. Is the problem because I am running in the Visual Studio 2008 IDE? It says this exception is only raise if a debugger is attached to the process. No, I tried running it outside the IDE. The exception wasn't generated but the application hung when the button was clicked.
It says the current thread must be set to single thread apartment (STA) mode. If the report is run on its own thread, is the "current" thread the thread the report is running on or is the main application's UI thread? I don't think I want to set my main application to single thread apartment mode because it is a multi-threaded application (although I really don't know for sure because I am new to multi-threaded programming).
My objective is to allow reports to run asynchronously so that the user can do other things while it is being generated. Here is the code I use to do this:
 ' Previews the report using a new thread (asynchronously)
 Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
 Dim backgroundProcess As System.ComponentModel.BackgroundWorker
 ' Start a new thread to run this report.
 backgroundProcess = New System.ComponentModel.BackgroundWorker
 Using (backgroundProcess)
 ' Wire the function we want to run to the 'do work' event.
 AddHandler backgroundProcess.DoWork, AddressOf PreviewReportAsynch_Start
 ' Kick off the report asynchronously and return control to the calling process
 backgroundProcess.RunWorkerAsync(sourceDatabase)
 End Using
 End Sub
 Private Sub PreviewReportAsynch_Start(ByVal sender As Object, ByVal e As System.ComponentModel.DoWorkEventArgs)
 ' The source database needed to call preview report was passed as the only argument
 Call PreviewReport(CType(e.Argument, clsMainApplicationDatabase))
 End Sub
 ' Previews the report. From the preview window, the user can print it.
 Public Function PreviewReport(ByVal sourceDatabase As clsMainApplicationDatabase) As FunctionEndedResult
 Dim errorBoxTitle As String
 Dim frmPreview As frmReportPreview
 ' Setup error handling
 errorBoxTitle = "Preview " & Name & " Report"
 PreviewReport = FunctionEndedResult.FAILURE
 On Error GoTo PreviewError
 ' Set up the crxReport object
 If InitializeReportProcess(sourceDatabase) <> FunctionEndedResult.SUCCESS Then
 GoTo PreviewExit
 End If
 ' Use the preview form to preview the report
 frmPreview = New frmReportPreview
 frmPreview.Report = crxReport
 frmPreview.ShowDialog()
 ' Save any settings that should persist from one run to the next
 Call SavePersistentSettings()
 ' If we got this far everything is OK.
 PreviewReport = FunctionEndedResult.SUCCESS
PreviewExit:
 ' Do any cleanup work
 Call CleanupReportProcess(sourceDatabase)
 Exit Function
PreviewError:
 ' Report error then exit gracefully
 ErrorBox(errorBoxTitle)
 Resume PreviewExit
 End Function
The variable crxReport is of type ReportDocument and the windows form called 'frmPreview' has only 1 control, the crystal reports viewer.
The print button on the viewer works fine. Just the export button is failing. Any ideas?

Hi Trevor.
Thank you for the reply. The report document is create on the main UI thread of my application. The preview form is created and destroyed on the separate thread. For reasons I won't get into, restructuring the code to move all the initialization stuff inside the preview form is not an option (OK, if you a really curious, I don't always preview a report, sometimes I print and/or export it directly which means the preview form isn't used).
What I learned through some other research is that there are some things (like COM calls and evidently some OLE automation stuff) that cannot be run on a thread that uses the MTA threading model. The export button probably uses some of this technology, thus the message stating that an STA threading model is required. I restructured the code as follows to accomodate this requirement. Here is a sample:
' Previews the report using a new thread (asynchronously)
 Public Sub PreviewReportAsynch(ByVal sourceDatabase As clsMainApplicationDatabase)
 Dim staThread As System.Threading.Thread
 ' Start the preview report function on a new thread
 staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep1)
 staThread.SetApartmentState(System.Threading.ApartmentState.MTA)
 staThread.Start(sourceDatabase)
 End Sub
 Private Sub PreviewReportAsynchStep1(ByVal sourceDatabase As Object)
 Dim staThread As System.Threading.Thread
 ' Initialize report preview. This includes staging any data and configuring the
 ' crystal report document object for use by the crystal report viewer control.
 If InitializeReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase)) = FunctionEndedResult.SUCCESS Then
 ' Show the report to the user. This must be done on an STA thread so we will
 ' start another of that type. See description of PreviewReportAsynchStep2()
 staThread = New System.Threading.Thread(AddressOf PreviewReportAsynchStep2)
 staThread.SetApartmentState(System.Threading.ApartmentState.STA)
 staThread.Start(mcrxReport)
 ' Wait for step 2 to finish. This blocks the current thread, but this thread
 ' isn't the main UI thread and this thread has no UI anymore (the progress
 ' form was closed) so it won't matter that is it blocked.
 staThread.Join()
 ' Save any settings that should persist from one successful run to the next
 Call SavePersistentSettings()
 End If
 ' Release the crystal report
 Call CleanupReportProcess(DirectCast(sourceDatabase, clsMainApplicationDatabase))
 End Sub
 ' The preview form must be launched on a thread that use the single-threaded apartment (STA) model.
 ' Threads use the multi-threaded apartment (MTA) model by default. This is necessary to make the
 ' export and print buttons on the preview form work. They do not work when running on a
 ' thread using MTA.
 Public Sub PreviewReportAsynchStep2(ByVal crxInitializedReport As Object)
 Dim frmPreview As frmReportPreview
 ' Use the preview form to preview the report. The preview form contains the crystal reports viewer control.
 frmPreview = New frmReportPreview
 frmPreview.Report = DirectCast(crxInitializedReport, ReportDocument)
 frmPreview.ShowDialog()
 End Sub
Thanks for your help!
Andy

Export to PDF fails for some reports, but report viewer works

Hi all
Our application produces several different reports.
- Report A can successfully be viewed in the ASP.NET report viewer control and can be exported to PDF
- Reports B and C can successfully be viewed in the ASP.NET report viewer (all pages), but export to PDF fails with a very unclear error message. The stack trace is attached below.
Two days ago, reports B and C have fully worked, and I'm sure by 100% that the report templates haven't been modified since then.
Can anyone explain what is going wrong? Is there some internal logging inside Crystal Reports that can be investigated to find out about the reasons of the error?
Any help would be greatly appreciated!
Thanks
Kuno
PS.: The Crystal Libraries under investigation are quite old. In fact, it is a very old application that still runs under .NET 1.0.
CrystalDecisions.CrystalReports.Engine.ExportException: Fehler in Datei C:WINDOWSTEMP     emp_b9cf0dd0-8964-4ddf-ba09-0daaa4e1ef20.rpt:
Fehler von Export-DLL gefunden:
   at u263B.u263BJ(String u2660§, EngineExceptionErrorID u2660u25AC)
, Int32 u2660u266B)Int16 u2660
   at u263B.u263BD(Int16 u2660u2640)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export()
   at AdamsClient.Web.EngineerClient.TolerancesReportPage.btnSpecPDF_Click(Object sender, EventArgs e) in D:ProjektexxxxAdamsII SVNDevelopmentS
ourceAdamsAdamsClientWebEngineerClientTolerancesReportPage.aspx.cs:line 496
   at System.Web.UI.WebControls.Button.OnClick(EventArgs e)
   at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
   at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
   at System.Web.UI.Page.ProcessRequestMain()

Hello Kuno,
please try to find out more details.
You say it is data dependent. Could you be a bit more specific. What data work or do not work ?
As a good test pls see if our samples reports work. They come with a default installation. If you do not have them any more - get them from [here|https://smpdl.sap-ag.de/~sapidp/012002523100005852352008E/cr_xi_xtreme_rep_smpl_en.zip].
Can you display and export them ? Do you get the same error ?
Thanks in advance
Falk

Crystal Reports Viewer 11.5 fails in Vista

We are using the Crystal Reports Viewer (crviewer.dll) version 11.5.10.1263. It works fine in XP but fails with the following error in Vista:
A first chance exception of type 'System.AccessViolationException' occurred in sprdlgs2.dll
An unhandled exception of type 'System.AccessViolationException' occurred in sprdlgs2.dll
Additional information: Attempted to read or write protected memory. This is often an indication that other memory is corrupt.
Sprdlgs2.dll is the DLL that contains the dialog in which the viewer resides. I know that crviewer.dll is registered correctly.
Our product is a C++ MFC multi-document application migrated from Visual Studio 6.0 to the .NET Framework 2.0 with the managed code flag (/clr) on.
Any help would be appreciated.

Hi Peter,
As Jason indicated the RDC has not been tested with Vista nor any version of .NET IDE. RDC is COM and Microsoft is moving away from COM and to their Framework which as you said you must also do as we must. Even though MS upgrades their OS's we can't follow for old technolgies, it just becomes too much coding and vertually becomes a new version of CR with the amount of work required. To move CR forward we try to release patches for the current versions that are 100% backward compatable with the current OS's. XI R2 with SP2 now supports Vista through a service patch.
The RDC has not been updated since Version 9 at that time Windows XP and 2000 were the only OS's available and they fully supported COM. It simply becomes to costly to make everything backward compatable. For developers like yourself you can appriciate this, do you still support Windows 3.1? At some point everyone has to cut off backward compatablity.
Moving forward because .NET 2008 is also new, even XI R2 has problems with it, this is due to MS updating their 1.1 Framework to 2.0 and 3.5. they changed things which we had specific dependencies on so now we have to also change, this all takes time to implement.
So this becomes a "best effort support" case since you are doing this on an unsupported platform. I did not see any results of your testing in debug mode on Vista? Install .NET 2008 on a Vista 32 PC and run your app in debug mode, if you use Vista 64 set your compiler to use x86 only. I believe your dll's are wrappers around the crviewer.dll and is likely either a permission issue with our COM(ActiveX) dll's or your dll's. Using regedt32.exe will give you the ability also to change permissions on the viewer and possibly your dll. It may be that Windows is not allowing your exe to access your wrapper as the error suggests in your original post.
Bottom line is, you should upgrade your app to use the .NET assemblies and stop using the RDC. There are lots of samples and fairly easy to migrate what your RDC app is doing to .NET code. Coding won't be one to one but the steps to execute a report and view are the same.
Thanks again
Don

Dynamic command execution fails in Crystal report viewer for parameters

We are using the Crystal Report Viewer for the .Net Application on the client side.The reports are designed using Crystal Report XI R2.
The issues that we are currently encountering is that, we are unable to load the combo-boxes in the pop-up for the parameters.
All the reports have multiple commands and the variables are of 'dynamic' type.
When the dialog box for requesting the pop-up comes up, It comes up empty even though they are linked to the respective commands.
Also,For reports having multiple parameters we are unable to give a single dialog box to get in all the parameters.It appears as a series of prompts.
Both,these issues are not encountered when the reports are launched via the Crystal reports developer tool.

Hello Varun,
I recommend to post this questionin the [dedicated NET forum|SAP Crystal Reports, version for Visual Studio;.
This forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Falk

Dynamic command execution fails in Crystal report viewer

We are using the Crystal Report Viewer for the .Net Application on the client side.The reports are designed using Crystal Report XI R2.
The issues that i am currently encountering is that, we are unable to load the combo-boxes in the pop-up for the parameters.
All the reports have multiple commands and the variables are of 'dynamic' type.
When the dialog box for requesting the pop-up comes up, It comes up empty even though they are linked to the respective commands.
Also,For reports having multiple parameters we are unable to give a single dialog box to get in all the parameters.It appears as a series of prompts.
Both,these issues are not encountered when the reports are launched via the Crystal reports developer tool.

Did you end up cross posting this anywhere else? I just started running into the problem with XI r1 trying to view a report I modified in r2. The only solution I seem to have found involves upgrading all of our customers to r2, which is not a very pleasant option. I'd be interested in learning if anyone has come up with a better solution.

Report Viewer error

Hello All;
I have problem running crystal reports thru SAPB1, that I have developed
I have installed Crystal Basic 2008 on on the machine where SAP B1 (Server and Client) is installed.
I have installed Crystal AddOn in SAPB1
The sample reports run OK when used from SAPB1; however when I try to run, my own reports it comes up with error:
"Crystal Report Form Viewer" --- Failed to Open the connection. ....... Reportname.rpt
Note that, The report runs OK when opened in Designer
I am using SQL Native client ODBC for data source.
The only difference I am seeing between my reports and sample reports (CustomerList_2008 and Items_2008) is sample reports use a data source named indika08.
I do not see this connection anywhere in my ODBC connections
Thanks for help in advance
Manu

I am experiencing the same issue. My report prompts for date ranges, which I can select. When I execute it comes up with failed to open connection.
The sample reports do indeed reference an odbc connection called, "indika08". So I created that datasource and referenced that in my report. Still no luck.
Any resolution ideas?

Unable to install Report Viewer 2012

As part of the SCOM console install I need to install Report Viewer 2012. To install Report Viewer 2012 I need to have Microsoft System CLR Types for SQL Server 2012.
I have installed all versions of CLR Types for SQL Server 2012 that I can find. But I still am not able to install Report Viewer 2012. It errors out when checking for CLR Types for SQL Server 2012.
I have tried every variation of report viewer (2008,2010,20120) and CLR Types for SQL Server (32bit/64bit). I am just not able to install report viewer so I can install the SCOM console.

Go to the link below
http://www.microsoft.com/en-us/download/details.aspx?id=35580
and then select SQLSysClrTypes. You don't need all the files.
Did this multiple times with the same result. After installing the ClrTypes the Report Viewer still indicates that it is failing that requirement.

Crystal Report/STRUTS: Error (404) when clicking on Control Buttons (Print, Export, Next, Previous, etc...) on report viewer

Post Author: jwenny
CA Forum: Deployment
Need help badly!!!
We are using the crystal reports plugin for STRUTS.
We are able to display the report in the crystal report viewer. However, when we click any control buttons (print, export, etc...), then we get:
JSPG0036E: Failed to find resource /Report-viewer.jsp
We then moved Report-viewer.jsp to the WebContents folder (root directory) and got a different error when we clicked any control button:
Error: 400 page not found
Does anyone know how to solve this problem? For instance, is there a setting or parameter that needs to be set?
Greatly appreciate any help!

HI,
Whenever we print the viewer does an auto postback, I believe due to this some of the values are getting missed. Moreover we are referring to the viewer and reportdocument object, it seems. So can you try this simple code in an application to see if it helps:
ReportDocument rdoc = new ReportDocument();
rdoc.Load("C:\TASKECrystalReports\Intraday.rpt");
rdoc.SetDatabaseLogon("uid","pwd");
rdoc.SetParameterValues("parameter name","value");
CrystalReportViewer.ReportSource = rdoc;
Helps?
Thanks.

Error in Preview and Print in Crystal Report Viewer 2.0.0.7 in Workstation

Hi Guys,
I am encountering a problem when clicking preview and print in Crystal Report Viewer 2.0.0.7. It returns an error
Unhandled exception has occurred in your application. If you click Continue the application will ignore and attempt to continue. If you click quit, the application will close immediately. Load report failed.
I already install the runtime crruntime_120_mlb, . net framework 3.5 sp1 and the add-on itself. The viewer is working properly in SAP Server. My version of SAP is SBO 2007 A SP00 PL10.
Regards,
Michael

here's the detailed error
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
Exception Text
CrystalDecisions.Shared.CrystalReportsException Load report failed. --- System.Runtime.InteropServices.COMException (0x80004005) The device is not ready.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
   at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
   at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Loaded Assemblies
mscorlib
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3620 (GDR.050727-3600)
    CodeBase fileCWINDOWSMicrosoft.NETFrameworkv2.0.50727mscorlib.dll
SAP_CR
    Assembly Version 2.0.0.7
    Win32 Version 2.0.0.7
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRSAP_CR.exe
Interop.SAPbouiCOM
    Assembly Version 8.0.0.0
    Win32 Version 8.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.SAPbouiCOM.DLL
System.Windows.Forms
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Windows.Forms2.0.0.0__b77a5c561934e089System.Windows.Forms.dll
System
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3614 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem2.0.0.0__b77a5c561934e089System.dll
System.Drawing
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Drawing2.0.0.0__b03f5f7f11d50a3aSystem.Drawing.dll
CustomMarshalers
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32CustomMarshalers2.0.0.0__b03f5f7f11d50a3aCustomMarshalers.dll
Interop.CR_Crypto
    Assembly Version 6.0.0.0
    Win32 Version 6.0.0.0
    CodeBase fileCProgram%20FilesSAPSAP%20Business%20OneAddOnsSAP_CRInterop.CR_Crypto.DLL
System.Data
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Data2.0.0.0__b77a5c561934e089System.Data.dll
System.Configuration
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Configuration2.0.0.0__b03f5f7f11d50a3aSystem.Configuration.dll
System.Xml
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3082 (QFE.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_MSILSystem.Xml2.0.0.0__b77a5c561934e089System.Xml.dll
System.Transactions
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.Transactions2.0.0.0__b77a5c561934e089System.Transactions.dll
System.EnterpriseServices
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase fileCWINDOWSassemblyGAC_32System.EnterpriseServices2.0.0.0__b03f5f7f11d50a3aSystem.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Windows.Forms12.0.2000.0__692fbea5521e1304CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.Shared12.0.2000.0__692fbea5521e1304CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportSource12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.CrystalReports.Engine12.0.2000.0__692fbea5521e1304CrystalDecisions.CrystalReports.Engine.dll
System.Web
    Assembly Version 2.0.0.0
    Win32 Version 2.0.50727.3618 (GDR.050727-3600)
    CodeBase fileCWINDOWSassemblyGAC_32System.Web2.0.0.0__b03f5f7f11d50a3aSystem.Web.dll
CrystalDecisions.ReportAppServer.CommLayer
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CommLayer12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ClientDoc12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Assembly Version 12.0.2000.0
    Win32 Version 12.0.2000.840
    CodeBase fileCWINDOWSassemblyGAC_MSILCrystalDecisions.ReportAppServer.DataSetConversion12.0.2000.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.DataDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.Controllers12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.CubeDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.1100.840
    CodeBase fileCWINDOWSassemblyGACCrystalDecisions.ReportAppServer.ReportDefModel12.0.1100.0__692fbea5521e1304CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
    Assembly Version 12.0.1100.0
    Win32 Version 12.0.0.840
    CodeBase fileCWINDOWSassemblyGACBusinessObjects.Licensing.KeycodeDecoder12.0.1100.0__692fbea5521e1304BusinessObjects.Licensing.KeycodeDecoder.dll
JIT Debugging
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example
configuration
    system.windows.forms jitDebugging=true
configuration
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Problem showing the crystal report viewer in form after added the component on it

Greetings
I have a problem running a program. I created a form which I added the component Crystal Report Viewer perfecty but during program execution when I call that form my VS 2012 Ultimate show the following error:
Translated:
Failed to create the form. See Exception.InnerException for details. Error: An exception occurred in the type initializer for 'CrystalDecisions.Shared.SharedUtils'.
Note: If I remove the component from the form. the applications runs fine when calling the form without the component CrystalReportViewer
It is something related to my VS? o just that the actual version 13.0.9 is not yet compatible?

Report.Show?
How about you try:
CrystalReportViewer1.ReportSource = <path to your report>
Or:
Dim crReportDocument As New CrystalDecisions.CrystalReports.Engine.ReportDocument
crReportDocument.Load(<path to your report>)
CrystalReportViewer1.ReportSource = crReportDocument
Or, if the report is added to the project:
crReportDocument = New test
CrystalReportViewer1.ReportSource = crReportDocument
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter
Message was edited by: Ludek Uher

Crystal Reports Viewer Control - Visual Studio 2008 WEB Application

My question is this: Has ANYONE on this planet been able to get the ASP .NET CR Viewer control to actually work?
Why does this editor NOT recognize End-of-line or CR characters or any whitespace??
I have developed a Crystal Reports "Viewer" web application in VS2008 using C#.
It's a simple app, in that it's a single page with a treeview control (containing the grouped names of the reports to which the user has access) and the CR Viewer control.
The report files live on a network share, and permissions to them is controlled via a SQL Server database, which, for each report, stores the UserID and Logion for the oracle database, as well as any required parameter values.
The reports themselves are all hititng an Oracle 10g database.
I managed to do this in a Windows desktop applcation using Visual Studio 2005 and VB .net, but now, upon trying to make this a web application in VS2008, I have completely failed. The application works when run locally, but when deployed to the web server, I experience database login prompts when I should not, (the dreaded "Report requires further information" message) even thought the setdatabaselogin has already been set. I have tried saving the reportdocument in viewstate and re-assigning the viewer Datasource property to it, that also fails. However, it only does it on some reports, and not others. (admittedly, the reports may have been created using different CR versions)
The viewer also displays data it should not be displaying when I attempt to scroll, when I do manage to get a report to run.
I am setting parameters dynamically at run time, whose values are stored in the SQL database.
Code Sample:
protected void ShowReport(int ReportID)
 SQLDataPortal2005.Common sql = new SQLDataPortal2005.Common();
 Hashtable outParms = new Hashtable();
 string sAccess;
 IDataReader dr;
 CrystalDecisions.CrystalReports.Engine.ReportDocument rptDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
 System.Security.Principal.WindowsPrincipal p = System.Threading.Thread.CurrentPrincipal as System.Security.Principal.WindowsPrincipal;
 sAccess = p.Identity.Name;
 int j = 0;
 int i = -1;
 if (!IsAdmin())
 sql.ExecNonQuery("CrystalReports", outParms, "proc_CRM_Check_Permissions", sAccess, Convert.ToInt32(TreeView1.SelectedNode.Value));
 if (outParms["@Allow"].ToString() != "True")
 Response.Redirect("ErrorPage.aspx"); // redirect to error page
 string sPath = System.Configuration.ConfigurationManager.AppSettings["WareHouse"].ToString();
 sPath = sPath + TreeView1.SelectedNode.Text.Trim() + ".rpt";
 rptDocument.Load(sPath);
 dr = sql.GetDataReader("CrystalReports", "proc_CRM_Get_Report", Convert.ToInt32(TreeView1.SelectedNode.Value));
 while (dr.Read() == true)
 j += 1;
 if (j < 2)
 rptDocument.SetDatabaseLogon(dr["DB_Login"].ToString(), dr["DB_Pwd"].ToString(), "PLAW", "LAWDB", true);
 pList = dr["ParmList"].ToString().Split(',');
 dr.Close();
 dr.Dispose();
 if (pList.Length > 0 && pList[0].ToString().Trim() != "")
 foreach (CrystalDecisions.Shared.ParameterField x in rptDocument.ParameterFields)
 i++;
 switch (x.ParameterValueType)
 case CrystalDecisions.Shared.ParameterValueKind.BooleanParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToBoolean(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.CurrencyParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDouble(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.DateParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.DateTimeParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.NumberParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToInt32(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.StringParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToString(pList));
 break;
 case CrystalDecisions.Shared.ParameterValueKind.TimeParameter:
 rptDocument.SetParameterValue(x.Name, Convert.ToDateTime(pList));
 break;
 Session["CReport"] = rptDocument;
 CRV1.ReportSource = rptDocument;
 CRV1.DisplayGroupTree = false;
 CRV1.HasRefreshButton = true;
 CRV1.ShowFirstPage();
Is there a better/different way of accomplishing this very simply process? All I need this application to do is to view a report, while setting it's parmeters (if required) dynamically at run time. I don't EVER want the user to be prompted for DB LOGIN INFO.
Edited by: RichardK on May 10, 2010 4:14 PM
Edited by: RichardK on May 10, 2010 4:14 PM
Edited by: RichardK on May 10, 2010 4:16 PM
Edited by: RichardK on May 10, 2010 4:18 PM
Edited by: RichardK on May 10, 2010 4:22 PM
Edited by: RichardK on May 10, 2010 4:23 PM

To answer you question; Yes, I suspect that most of the users in this community have managed to successfully create web apps. And this is the tiniest of sampling of the developers out there...
A few suggestions;
1) Keep the posts to under 1200 characters. Otherwise, the formatting is lost which makes it difficult to read.
2) Try out a few sample apps from here:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Suggest; csharp_web_simplelogonengine.zip, csharp_web_simplelogonviewer.zip and csharp_web_subreport_logon.zip.
3) Start simple; one table, one field, no subreports. Hard code the database logon parameters. Convince your self that this does work. Increase the complexity - add fields, tables, subreports. Do not mix connection methods (e.g.; if ODBC for main, than ODBC for sub is a good idea, though not a requirement).
4) See the article [Troubleshooting Guide to Database Connectivity Issues with Crystal Reports in Visual Studio .NET Applications|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0225775-88c4-2c10-bd80-8298769293de].
5) See [this|http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d05b3bb7-0f28-2c10-4ea3-84dbdc4e414e?quicklink=index&overridelayout=true] article.
6) Consider creating a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek
Follow us on Twitter
http://twitter.com/SAPCRNetSup

Report Viewer fails in IE11

Similar Messages

Maybe you are looking for