Report which would collect all users in STAD running an specific program

Hi
How could I make an report which would collect all users in STAD running an specific program daily. The issuse is that this program is not available in sm20. How could I then send this list to list of receipients?
I have in mind to "submit "stad" but it is long time ago I used this and I do not have access to that source
THX

we found solution via a job runned report with variant

Similar Messages

How to lockdown Inter Explorer? We would like all users to use IE 10 and not be able to upgrade

Is there a group policy that doesn't allow users to upgrade IE? We would like all users to use IE 10

Hello monolithickernal,
I agree with MVP Robear Dyer (PA Bear).
We could use the IE11 Blocker Toolkit to accomplish this requirement.
Additionally, Organizations that use an update management solution such as Windows Server Update Services (WSUS) or System Center Configuration Manager (SCCM) do not need to deploy the IE11 Automatic Update Blocker Toolkit.
For more information, please refer to the following article.
http://blogs.msdn.com/b/ie/archive/2013/10/11/ie11-automatic-update-blocker-toolkit-available-for-windows-7.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

A report which could show all contracts where I involved as collaborator,reviewer/manager

Hi,
Is there any standard reports for below? please advise me.
I am looking a report which could show all contracts where I am involved (collaborator, reviewer, Manager…).
That is if I run a report which could show all contracts where I am involved as collaborator/ reviewer/ Manager.
With Regards,
Jaheer

Hi Jaheer,
"My Master Agreements and Contract Documents" shows only the master agreements and the related contract to the documents you are a collaborator (owner, collaborator, reviewer, etc.). Does this report fulfill your requirements? If not, I think the best you can do is dupplicate the query and update it as required.
Regards,
Marc Romagosa

Javascript: Query all users with read permission to specific list

Is it possible to use javascript to retrieve all users with read permissions to specific list? This (http://www.c-sharpcorner.com/UploadFile/anavijai/how-to-get-all-the-users-from-site-group-in-sharepoint-2013/) shows how to get users from group but what
about list. All users in list may not exist in spgoups.

Hi,
If with Server Object Model which is executed in server side, in the
SPList object, there is a
RoleAssignments property can help to get what you want without looping through all the users in site:
public static void getPermissionsOfList()
using (SPSite site = new SPSite("http://sp"))
using (SPWeb web = site.RootWeb)
SPList list = web.GetList("/Lists/List1");
SPRoleAssignmentCollection roles = list.RoleAssignments;
foreach (SPRoleAssignment role in roles)
Console.WriteLine("~");
Console.WriteLine("Name: " + role.Member.Name);
SPRoleDefinitionBindingCollection bindings = role.RoleDefinitionBindings;
XmlDocument doc = new XmlDocument();
doc.LoadXml(bindings.Xml);
//Console.WriteLine(doc.InnerXml);
XmlNodeList itemList = doc.DocumentElement.SelectNodes("Role");
foreach (XmlNode currNode in itemList)
string s = currNode.Attributes["Name"].Value.ToString();
Console.WriteLine("Permission Level: " + s);
However, when comes to JavaScript Client Object Model, as there is no such property provided, I suggest you take the solution provided in my previous post for a try.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

I have a white iPhone 4S 8 gb it say that I have most if the room in my music and and I only have fourth songs and also It says that the second mist spacious item is my photo which I deleted all of and I running low on space any suggestions

I have a white iPhone 4S 8 gb it say that I have most if the room in my music and and I only have fourth songs and also It says that the second mist spacious item is my photo which I deleted all of and I running low on space any suggestions

Read this on how to do that https://discussions.apple.com/docs/DOC-3141

Reports in GC: show all users with status != 'OPEN' (locked users)

Hello,
I would like to create a report in GC which shows all users of a given database with status != 'OPEN'.
To create a report is not the problem - but which view/table of the GC repository contains the needed information about the status of the database users?
I've already looked through alot of the mgmt$... views - but didn't find any information about the user status...
Any help will be appreciated...
Rgds
JH

The reports of the GC are using the repository of the GC. Therefore you will only find the users of that repository in sys.dba_users. What I need are the users of a database which is monitored through an agent of the GC.
Rgds
JH

Discoverer report been refreshed for all users

Hi,
We have created few reports in discoverer. These reports are been ported on to the portal.
Totally there are almost 30 portal users. The problem i am facing is the report gets refreshed for all the portal users, due to which we are facing the performing issue. How can restrict a specific report which will refresh only for few users and not for all 30 portal users
Thanks in advance
Vishwanath

Generic, try create as many discoverer portlets as type of refresh you need. and grant access on this portlets for appointed users

One or more hierachies in one report which differs for each user

Hi BI Gurus,
Can we have more than one hierarchy in one report which enables different hierarchy for diff user.
The requirement is like this.
We have almost 10 hierarchies..
Each user is restricted to view a particular hierarchy only.
Is this possible ....Its very urgent..
Pls help out
Thks in advance,
Mahi

If you have a variabel at the beginning letting the user choose from his/her available hierarchies this should not be a problem on the reportside. As long as they is connected to the same info-object.
How to restrict the users to different hierarchies is another question.
Hope this helps

Saved Interactive reports options display for all users

Hello,
For now I build once again my apex apllications in Apex 4.0
I created a user. In the apex administration this user is not an administrator and not a developper either.
However the saved interactive report options display for him too, so he can choose the look of the default report, etc...
Is that a bug ?? Or did I forget something ?
Thanks !
Fanny

Fanny, as long as you are logged in as a developer in apex you will be able to save the report as the standard report, no matter with what user you are logged into your application.
Paul

Webex APP from BB.World throws all users out of running Webex

Hi folks,
Until recently, I could log into Webex calls and enjoy telephone and screen conferences using the BB Webex app.
Received an OS update due to the Outlook issue ( KB35813 )
I am now running a Z30 (OS 10.2.1.2941 / 10.2.1.3175 ) and the Webex App (3.5.0.443 )
Yesterday I joined a running conf call using the app and upon joining
ALL people were dropped from the call.
Subsequent tests with colleagues confirmed this behaviour !
Whenever I use the App to join a call - the call is immediately closed.
Any suggestions or tips where I can get the developers to check this out ?
Cheers from BB-Hamburg !

Hi,
According to the article below, the command Add-AppxProvisionedPackage should be work to sideload store app to all user.
https://technet.microsoft.com/en-us/library/hh824882.aspx
https://technet.microsoft.com/en-us/windows/jj874388.aspx
Sideload the app for all users
DISM is a command-line tool that you can use to service a Windows image—online or offline. (If you are not familiar with DISM, see Deployment Image Servicing and Management Technical Reference.) You can use DISM to provision a Windows Store app in an online
Windows image for all users who share the computer. To do that, you use the Add-ProvisionedAppxPackage option:
Log on to contoso-pc using an account with administrative privileges on the computer. You must use an administrator account here, because you are provisioning an app in the image.
On the Start screen, type PowerShell and press Ctrl + Shift + Enter.
On the User Account Control dialog box, click Yes.
At the Windows PowerShell prompt, run the following command, where SampleApp is the path and file name of the package file you created (for example, MySample_1.0.0.0_AnyCPU_Debug.appx):
DISM /Online /Add-ProvisionedAppxPackage /PackagePath:“SampleApp” /skiplicense
Monitor the installation, and close the Windows PowerShell window after it finishes.
To test this example, you need to log onto to the computer using one of your test accounts. You cannot run the app by using the built-in local or domain Administrator account. In this case, we logged on to the computer as Mark. Then, on the Start screen, click
the app to run it. (If you do not see the app on the Start screen, type the app’s name to find it, and then click the app’s tile.) After verifying that the app works for the current user account, log onto the computer using a different test account and run
the app. Because you used DISM to provision the app in the image, it is available to both accounts.
Roger Lu
TechNet Community Support

Timeout occuring running a report which displays information about users

Hi,
I developed a report using JSPDynPages which displays the following information about all the users in a particular Group.
1)Uid
2)FirstName
3)LastName
4)EMail
5)Account status (active/locked)
6)R3 UserName
In the group for which i am running the report consists of about 4,500 users and the report is getting timedout.
My logic in the code is to iterate through all the users in the group and collecting their information and populating a array which will then be given to the DefaultTableViewModel to display the info in a tabular form.
Obviously this process is taking more than the predefined timeout time (i guess it is 1 min) and hence the timout is occuring.
Can anyone suggest a solution to this problem (other than increasin the timeout param).
Thanks in Advance,
Sudhir

Could you tell me how to display the first name and last name in a Bex Analyzer. I want the user to see their name when they log into the report screen.
Please help.
Regards
Anita

Software Metering: Users that have run a specific metered software program

I need this report customization in way that the month prompt needst to be replaced by
Since date/ for 3 Months /6 Months.
My knowledge in SQL reports is limited.Can anybody help me or guide me how to do that..??
Thank you.

Yes, I know that this is an old post, I’m just trying to clean them up.
First off, what you are asking is complicated, the reason why is
the “Since date”, How exactly would you put that into a prompt along with the 3&6 months options?
Secondly, What does your query look like?
http://www.enhansoft.com/

BI Report - List all users and their assigned roles

Hello,
i need a report, which lists me all users and their roles.
Which table stores this membership information about the users?
USR or UGP does not have any values

Hi Reynaldo,
You can go to SE16 -> table name "AGR_USERS" and see the records for all users. Arrange them in ascending order by name and you will get the report what you have mention above.
Download it and put it in EXCEL.
Best Wishes.
Kumar

How to show all user logged in/loggout in Report

How to display All User Logged in time & Logout Time?
Hi..
I want to display All user in Portlet a report that show us all user that logged in the portal,
their username,
their time logged in,
their time logged out..
where can i find these information?
do Portal have already something like this?
Plz advise..Thanks.

Thanks Sharmila for answering my question..
Similar question i want to ask..
I look at the table, and view it's data...
Mmm..some i don't recognize...
Actually, i just want to grep
1)The UserId of the user who logged in the portal
2)The time he logged in the portal
3)the time he log out the portal
That's all..
How can i do that?..
I plan to create one table to store the data, and plan to grab the data by jsp....
What are the table/function/api that can i use and how?
Plz advise.
Thanks

How to make saved IR available for all users

Hi,
I've created IR and saved it to several tabs based on search conditions.
But they're only visible for developers.
How to make these tabs available for all end-users ?
Does version 4.0 support this option ?
Thank you!

Hi
At present this feature is not included, although I believe it may be in 4.0. Many people have provided workarounds for this. None of which I have tried. I cannot find the original thread but here is a solution from a chap called Ruud
>
One way to share your saved reports with others is to 'Publish' your report settings to a few intermediate tables in your application and have other users 'Import' your settings from there. The reason for using intermediate tables is so that not all your saved reports need to be 'visible' to other users (only those that you've chosen to publish).
Basically you have available the following views and package calls that any APEX user can access:-
- flows_030100.apex_application_pages (all application pages)
- flows_030100.apex_application_page_ir_rpt (all saved reports - inclusing defaults and all user saved reports)
- flows_030100.apex_application_page_ir_cond (the associated conditions/filters for above saved reports)
- wwv_flow_api.create_worksheet_rpt (package procedure that creates a new saved report)
- wwv_flow_api.create_worksheet_condition (package procedure that creates a condition/filter for above saved report)
The way I've done it is that I've created 2 tables in my application schema that are straightforward clones of the 2 above views.
CREATE TABLE user_report_settings AS SELECT * FROM flows_030100.apex_application_page_ir_rpt;
CREATE TABLE user_report_conditions AS SELECT * FROM flows_030100.apex_application_page_ir_cond;
( NB. I deleted any contents that may have come across to make sure we start with a clean slate. )
These two tables will act as my 'repository'.
To simplify matters I've also created 2 views that look at the same APEX views.
CREATE OR REPLACE VIEW v_report_settings AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_rpt r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND r.session_id IS NULL
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
CREATE OR REPLACE VIEW v_report_conditions AS
SELECT r.*
p.page_name
FROM flows_030100.apex_application_page_ir_cond r,
flows_030100.apex_application_pages p
WHERE UPPER ( r.application_name ) = <Your App Name>
AND r.application_user 'APXWS_DEFAULT'
AND p.application_id = r.application_id
AND p.page_id = r.page_id;
I then built 2 screens:-
1) Publish Report Settings
This shows 2 report regions:-
- Region 1 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT apex_item.checkbox ( 1, report_id ) " ",
page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY page_name,
report_name
Each row has a checkbox to select the required settings to publish.
The region has a button called PUBLISH (with associated process) that when pressed will copy the settings from
V_REPORT_SETTINGS (and V_REPORT_CONDITIONS) into USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
- Region 2 - Shows a list of already published reports in table USER_REPORT_SETTINGS (again filtered for your user)
SELECT apex_item.checkbox ( 10, s.report_id ) " ",
m.label,
s.report_name
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user = :APP_USER
AND ( s.page_id = :P27_REPORT OR :P27_REPORT = 0 )
ORDER BY m.label,
s.report_name
Each row has a checkbox to select a setting that you would like to delete from the repository.
The region has a button called DELETE (with associated process) that when pressed will remove the selected
rows from USER_REPORT_SETTINGS (and USER_REPORT_CONDITIONS).
NB: P27_REPORT is a "Select List With Submit" to filter the required report page first.
Table MENU is my application menu table where I store my menu/pages info.
2) Import Report Settings
This again shows 2 report regions:-
- Region 1 - Shows a list of all published reports in table USER_REPORT_SETTINGS (filtered to show only other users saved reports)
SELECT apex_item.checkbox ( 1, s.report_id ) " ",
m.label,
s.report_name,
s.application_user
FROM user_report_settings s,
menu m
WHERE m.page_no = s.page_id
AND s.application_user :APP_USER
AND ( s.page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY m.label,
s.report_name,
s.application_user
Each row has a checkbox to select the setting(s) that you would like to import from the repository.
The region has one button called IMPORT that when pressed will import the selected settings.
It does this by using the 2 above mentioned package procedure to create a new saved report for you
with the information form the repository. Be careful to match the right column with the right procedure
parameter and to 'reverse' any DECODEs that the view has.
- Region 2 - Shows a list of all your saved reports from V_REPORT_SETTINGS (filtered to only show yours)
SELECT page_name,
report_name
FROM v_report_settings
WHERE application_user = :APP_USER
AND ( page_id = :P28_REPORT OR :P28_REPORT = 0 )
ORDER BY page_name,
report_name
This is only needed to give you some feedback as to whether the import succeeded.
A few proviso's:-
a) I'm sure there's a better way to do all this but this works for me :-)
b) This does not work for Computations! I have not found an API call to create computations.
They will simply not come across into the repository.
c) If you import the same settings twice I've made it so that the name is suffixed with (2), (3) etc.
I did not find a way to update existing report settings. You can only create new ones.
d) Make sure you refer to your saved reports by name, not ID, when matching APEX stored reports and the
reports in your repository as the ID numbers may change if you re-import an application or if you
auto-generate your screens/reports (as I do).
Ruud
>
To me this is a bit too much of a hack and I personally wouldn't implement it - it's just an example to show it can be done.
Also if you look here in the help in APEX Home > Adding Application Components > Creating Reports > Editing Interactive Reports
...and go to the last paragraph, you can embed predicates in the URL.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)
Edited by: Munky on Jul 30, 2009 8:03 AM

Report which would collect all users in STAD running an specific program

Similar Messages

Maybe you are looking for