One or more hierachies in one report which differs for each user

Hi BI Gurus,
Can we have more than one hierarchy in one report which enables different hierarchy for diff user.
The requirement is like this.
We have almost 10 hierarchies..
Each user is restricted to view a particular hierarchy only.
Is this possible ....Its very urgent..
Pls help out
Thks in advance,
Mahi

If you have a variabel at the beginning letting the user choose from his/her available hierarchies this should not be a problem on the reportside. As long as they is connected to the same info-object.
How to restrict the users to different hierarchies is another question.
Hope this helps

Similar Messages

  • Report which would collect all users in STAD running an specific program

    Hi
    How could I make an report which would collect all users in STAD running an specific program daily. The issuse is that this program is not available in sm20. How could I then send this list to list of receipients?
    I have in mind to "submit "stad" but it is long time ago I used this and I do not have access to that source
    THX

    we found solution via a job runned report with variant

  • Urgent !!Report Fiscal year for each Month i.e.12mnths

    Hi All,
      I have a cube with following details.
    1.Revenue Value ==1200
    2.Fiscal year==2007
    3.Product type==A
    But If i need to create a Dashboard Report with this Cube,
    But it has display tht Fiscal Year Value 2000 for each month
    Like ..KF=1200/12(months)
    So i need display as follows for the graph...
    MONTH        JAN     FEB   MAR...............................DEC
    REVENUE     100    100    100...................................100
    THIS IS HOW MY REPORT SHLD BE EXECUTED..
    But I dont have any date or month field in my cube,how can I get it for Each month as above..??????
    Can any one explain me & suggest me how to proceed..???
    Thnx
    BI Learner

    Hi Voodi,
    That is the only solution... which i have in my mind...Let me try it out & get back to u..
    But as well I have another KF under that Revenue which display for each month & we need to run a dashboard with line diagram where one line for Revenue & another for PO which shld give a comparison for all the months...
    Does this work out??
    Thanks a lot for ur ideas.

  • POS system reports daily totals for each store, not for each cashier

    Hi!
    We are implementing SAP Retail (ERP 6.0 EHP4 stack 3), SAP PI (Netweaver PI 7.1 SP 8) and SAP BW (NetWeaver 7.0 ehp1 stack 4, incl BI content 704, SP 3 ) for a client. Their POS system is a 3rd party system, i.e. not SAP POS.
    This issue concerns the fact that the POS system reports daily totals for each store, not for each cashier.
    At my client, the daily settlements are done for each cashier. At the end of day, we will get cash drawers counted with sum of each tender (cash and checks) at the end of day. In addition, the POS system will send sum of each tender, sum of all sales and sum of different finance transactions made each day. However, this u201Ctotals messageu201D is not sent separately for each workstation, or for each cashier, but rather for each store. So we only gets the totals per store.
    Questions:
    i)     Are the tasks available for comparing totals to the aggregates for POS transaction able to handle u201Cstore-only figuresu201D?
    ii)     If not, how can we adapt the tasks so they can handle u201Cstore-only figuresu201D?
    iii)     Can we trigger outbound tasks sending WPUUMS and WPUTAB using outbound dispatcher automatically, or must we run this as a manual task of an employee, after checking that all stores have delivered their totals?
    iv)     The u201Cstore-only figuresu201D does not include cashier statistics. Do we need the u201Ccashier statisticsu201D as total figures, or can we just populate the BAPI for each POS transaction with data, in order to populate BW infocubes for cashier statistics?
    Thanks for any advice !
    Best regards,
    Oeystein Emhjellen

    Hi Kees ...
    Your profile indicates you are running Leopard v10.5.8
    You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
    Make sure your Mac meets Snow Leopard's requirements here.
    You must have the minimum of v10.6.6 installed in order to access the App Store.
    You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store

  • GL security works for one report and not for other report.

    Hi everybody,
    We have setup GL security and for our discoverer reports we are calling
    APPS.GL_SECURITY_PKG.VALIDATE_ACCESS( sl.SET_OF_BOOKS_ID,gl.CODE_COMBINATION_ID ) = 'TRUE' in the query.
    Now among 3 reports, 2 are working fine but one report is not showing any data if i use the above condition.
    Hint: That particular report is based on a Materialized view.
    Any ideas??
    Thank you
    --Kumar                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    Hi Rod,
    Thanks for your reply but when i try to use the where
    condition in the folder in Admin, its not recognizing the Apps.GL_SECURITY_PKG.VALIDATE_ACCESS....
    Any Suggestion on this?
    Thank you
    --Kumar                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • WinXP with two users - can we have two separate iTunes, one for each user?

    Question:  On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
    Details:  Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product.  My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad.  (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.)  [By the way, if iTunes will NOT help me do what I want to do, please let me know.  But that is not my question.]
    I am only one of two users on the PC.  My wife is the second user on the PC.  She already installed iTunes on the PC for her own use.  She is an avid iTunes user.   Most of the time, she does not use this PC.  She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time.  She has also had an iPod for some time, hence her use of iTunes.  And now, for the last two weeks, she also has a new iPhone 4S and her own iPad.  So her use of iTunes will grow.  The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes.  Not even for a second.
    So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes?  If the answer is "yes", please give me a step-by-step and list all details.  Is there a YouTube that shows this specifically?  
    More details:  Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago.  I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25.  (As a result, the following processes/services are now running, which normally don't run when I am the user: 
      C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
      C:\Program Files\iPod\bin\iPodService.exe
      C:\Program Files\iTunes\iTunesHelper.exe
    Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
      C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
      C:\Program Files\iTunes\iTunesHelper.exe )
    My wife says her iTunes is NOT set for Family Share.  (That sounds correct to me, for now and forever.)
    Summary:  So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
    Thanks !!!

    Mr. Wiclee - thanks for the link.
    When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever.  I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account?  Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself?  Or will I still need to use Method Three in your link? 
    The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account.  On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad.  How can I be sure to accomplish this goal?
    In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs.  However, so do I in my User even though I have not yet installed any Apple programs on my side.  I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
    Thanks.  Please advise.

  • Can I have three different iCloud accounts in my iBook? one for each user of the family? Thanks

    I have a computer at home which is used by 5 family members. Each of us have a separate user in the MacBook. Can each of us have a different iCloud account to sincronize with each of our iPhones or once you download the iCloud for one of us, no other iCloud will be added to the same laptop?
    Many thanks.

    Hi Valeriano009,
    Welcome to the Support Communities!
    You are already on the right track with 5 individual user accounts on your computer.    Please be sure to back up your main Apple ID account before making any changes below.
    The article below will explain in more detail ... but it sounds like you will want to create a separate Apple ID for each member of your family to keep their contacts, calendars, Photo Stream etc. separate. 
    If your family has made a lot of iTunes Store purchases, you can stay signed in to your current Apple ID to have access to them.   Or your family members can start fresh with their own iTunes Store purchases.  Please review the Frequently Asked Questions section in this article:
    Using your Apple ID for Apple services
    http://support.apple.com/kb/HT4895
    Each member of your family should log into their own user account on the computer, and then click on the link below to create their unique Apple ID.
    Apple - My Apple ID
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Make sure that the email address you want to use for your Apple ID meets these conditions:
    The email address is one that you use regularly, because it will be the primary email address for your Apple ID.
    The email address is not associated with any other Apple ID.
    The email address is not an iCloud email address, which is already an Apple ID. iCloud email addresses end with @icloud.com, @me.com, or @mac.com.
    If each family member is currently using the old Apple ID for their iCloud account on their devices, they will need to follow these steps:
    iCloud: Change iCloud feature settings
    http://support.apple.com/kb/PH2613
    Before you delete the old iCloud account from your iPhone, iPad or iPod touch, turn off each of the features ( contacts, calendars, etc. ) and when prompted, choose to "Keep on My iPhone" if you wish to keep that information.  If your family member doesn't need or want any of this information, then skip down to the selection below to delete the iCloud account completely.
    Turn iCloud features  off
    On your iOS device’s Home screen, go to Settings > iCloud, then tap to turn off iCloud features.
    When you turn off a feature, you’re asked whether you want your device to keep a copy of your information stored in iCloud for that feature.
    Once you have saved the contacts, calendars, etc. that you want from the current iCloud account on your family member's iPhone, then you can delete the old iCloud account from their device.
    Turn off iCloud completely
    On your iOS device’s Home screen, go to Settings > iCloud, then at the bottom of the screen, tap Delete Account.
    At this point, I would suggest turning off the device, and restarting it.  Then, tap on Settings > Mail, Contacts, Calendars.  Tap on Add Account.  Tap iCloud.  Now type in your family member's new Apple ID email address and password.
    Apple ID: What to do after you change your Apple ID
    http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
    I hope this information helps ....
    Have a great day!
    - Judy

  • Multiple records displayed on form at one time- 2 lines for each record

    Hello,
    I have a canvas in which I want to display 8 records at at time, so in the data block I specified 8 as the "number of records displayed" value.
    However, the record has too many fields to display on 1 vertical line, so I want to split the fields into two separate lines, so there will still be 8 records but each in two lines.
    How do I do that?
    I'm using Forms 10g. The block is a database block using FROM CLAUSE QUERY , and the canvas is stacked.
    Thanks

    Sandy,
    You will need to set the "Distance Between Records" property for each item in the Multi-Record Block. This will increase the space between rows so you can stack them into two rows. Unfortunately, you can't set this property at the block - so you have to set it for each displayed item.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • Any way to create a simple report selection menu for end user?

    Hello.  We purchased two full versions of Crystal Reports 2008, version 12.3.1.684.  One copy is for me, where I create reports and the second copy is for an end user who runs them.  I would like to create a basic menu so when he starts his copy of Crystal Reports it will open with this simple report menu.  Is there a way to do this?

    I would suggest you invest in small viewer tools for your user.  The viewers can house the reports you create and your user can view them without accidently affecting the design structure of your report.  With some viewers, you can even customize the report menu.  You can begin with this website:
    [http://www.kenhamady.com/bookmarks.html]
    I hope this helps,
    Regards,
    Zack H.

  • Discoverer report been refreshed for all users

    Hi,
    We have created few reports in discoverer. These reports are been ported on to the portal.
    Totally there are almost 30 portal users. The problem i am facing is the report gets refreshed for all the portal users, due to which we are facing the performing issue. How can restrict a specific report which will refresh only for few users and not for all 30 portal users
    Thanks in advance
    Vishwanath

    Generic, try create as many discoverer portlets as type of refresh you need. and grant access on this portlets for appointed users

  • Report Error only for some users - Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6.

    Hi,
    We have certain SSRS report  (which includes subreports) which
    many users are able to access, but
    some users cannot access- they get this error:
    "Unsupported RPL stream version detected: 101.116.1047292257. Expected version: 10.6."
    (We are not using SP integrated mode)(using SSRS 2008 R2)
    No problem in VS or on server when trying to run this report.
    User having this problem has the sam ewindows and explorer versions.
    Please advice
    Namnami

     have the user clear their temporary internet cache
    How? 
    Another detail- on the problematic user's computer if I run the explorer using my credentials, the report runs fine. 
    Thanks
    Namnami

  • OBIEE Report keeps running for some users

    Hi Mates,
    I am facing a issue, while running the report.
    This reports keeps on running and expires after the max time out for few of the users whereas for few users it displays the output in 30 secs or so.
    Just to add in Oracle Identity Management has been setup security.
    Tried looking into the log files but couldn't find something related.
    OBIEE Version - 11.1.1.5
    Database version - 11.1.2
    Regards
    Gyan

    You need to verify the sqls fired for both users and its data level security, you may be pulling more data for few users.
    Also, try running the sql query in Toad or some other tool and compare the performance.

  • Activity report in REM for each document posting

    Dear All,
    Please help me with , how to get the Activity report for each & every for  MFBF document posted.
    BR,
    Subbu.

    Dear Subbu,
    The report MF12 can help you in getting the postings that has happened for a plant and using the type
    B : Backflush
    Goods receipt, goods issue and activity backflush.
    Check and revert back.
    Regards
    Mangalraj.S

  • Saved Interactive reports options display for all users

    Hello,
    For now I build once again my apex apllications in Apex 4.0
    I created a user. In the apex administration this user is not an administrator and not a developper either.
    However the saved interactive report options display for him too, so he can choose the look of the default report, etc...
    Is that a bug ?? Or did I forget something ?
    Thanks !
    Fanny

    Fanny, as long as you are logged in as a developer in apex you will be able to save the report as the standard report, no matter with what user you are logged into your application.
    Paul

  • How to enable detail view interactive report as default for public user?

    Hello all,
    I'm currently developing a search results page.
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    all worked well and looked neat but however when i pass value from my search page using IR_ROWFILTER and clear the results page using page_no,RIR, it brings me to the interactive reports result page with the default table like view.
    i have to press the detail view to get it. i tried saving it as default but it wont work. this issue is for public user.
    if i make the page requires authentication, and save the detail view as default i would not have any problem. i could search and it will straightly bring to the detail view of the search page.
    of course the other reason i found is because im using the IR_ROWFILTER and clearing page using page_no,RIR..without it,it works well but i need it coz im doing a a search result. i need to send search text from another page and put it in the filter in the search page. i would need to use RIR to clear it for searching again.
    is this a limitation for public user? it doesnt happened for authenticated user though..
    how can i make this view as default for public user?

    T101_cyberdyne wrote:
    how can i make this view as default for public user?
    Flip the report into Detail view on page load using an Page Load dynamic action with the following Execute JavaScript Code true action:
    gReport.data.view('DETAIL');
    I'm trying to do a nice view instead of a default table like view from the interactive reports. So in this case i enabled the detail view so i could make fancy designs.
    Do you really need this to be an IR? Other than the detail layout, do you require any of the interactive features? If not, try using a standard report with a custom report template.

Maybe you are looking for