A report which could show all contracts where I involved as collaborator,reviewer/manager
Hi,
Is there any standard reports for below? please advise me.
I am looking a report which could show all contracts where I am involved (collaborator, reviewer, Manager…).
That is if I run a report which could show all contracts where I am involved as collaborator/ reviewer/ Manager.
With Regards,
Jaheer
Hi Jaheer,
"My Master Agreements and Contract Documents" shows only the master agreements and the related contract to the documents you are a collaborator (owner, collaborator, reviewer, etc.). Does this report fulfill your requirements? If not, I think the best you can do is dupplicate the query and update it as required.
Regards,
Marc Romagosa
Similar Messages
-
Report which would collect all users in STAD running an specific program
Hi
How could I make an report which would collect all users in STAD running an specific program daily. The issuse is that this program is not available in sm20. How could I then send this list to list of receipients?
I have in mind to "submit "stad" but it is long time ago I used this and I do not have access to that source
THXwe found solution via a job runned report with variant
-
Standard report which can show the details of Invoice value and PO value
Hi all,
Is there any standard report which can show the details of Invoice value is more than 5% of PO value. MIRO value and PO value.
If any report which caters the maximum requirement is also fine
Regards
Sanjith
Edited by: Sanjith Sethu Lekha on Dec 6, 2011 2:42 PMHi
Please refer the below mentioned link
/thread/1789934 [original link is broken]
Regards
Praveen P C -
BI publisher report is not showing all the data
Hi All,
I have created a report using BI Publisher in R12. The report is not showing all the records.
I have checked the result XML it is also not having all the data. My query returns 846 rows but my report only has 662 rows.
what might be the issue.please give me some idea to resolve this issue.
Thanks in advance.
Regards,
P.KalidossHi Arun,
In the following code: public SelectItem[] getAllPrinters() {
if (allPrinters == null) { // allPrinters is not defined. what type of object it is
PrintService[] printers = PrintServiceLookup.lookupPrintServices(null, null);
allPrinters = new SelectItem[printers.length];
for (int i = 0; i < printers.length; i++) {
SelectItem printer =
new SelectItem(printers.getName(), printers[i].getName());
allPrinters[i] = printer;
return allPrinters;;;
Variable allPrinters is not defined. what type of object it is?
And also the same variable is referenced here <af:selectOneChoice label="Available Printers" partialTriggers="cb1"
value="#{pageFlowScope.applicationPrinterBean.selectedPrinter}"
id="soc1"
autoSubmit="true">
<f:selectItems value="#{pageFlowScope.applicationPrinterBean.allPrinters}" id="si1"/>
</af:selectOneChoice>.
Thanks. -
ALV GRID Report is not showing all records which is in internal table
hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input. Example: it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
is_layout = wa_layout
it_fieldcat = it_fcat
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
Best Regards,
Srinivashi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event, "ALV event
it_fcat TYPE slis_t_fieldcat_alv, "Field catalog
it_list_top_of_page TYPE slis_t_listheader,
c_tabname TYPE slis_tabname VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
wa_event TYPE slis_alv_event,
wa_fcat TYPE slis_fieldcat_alv,
wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'SIZE2' 'SIZE2' '' '10' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mains
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'CUT1' 'CUT1' '' '11' '',
'22' 'SIZE2' 'SIZE2' '' '10' '',
'23' 'CUT2' 'CUT2' '' '11' '',
'24' 'SIZE3' 'SIZE3' '' '10' '',
'25' 'CUT3' 'CUT3' '' '11' '',
'26' 'SIZE4' 'SIZE4' '' '10' '',
'27' 'CUT4' 'CUT4' '' '11' '',
'28' 'SIZE5' 'SIZE5' '' '10' '',
'29' 'CUT5' 'CUT5' '' '11' '',
'30' 'SIZE6' 'SIZE6' '' '10' '',
'31' 'CUT6' 'CUT6' '' '11' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mainall
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM. " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
p_fieldname
p_text
p_datatype
p_outputlen
p_col_freez.
wa_fcat-row_pos = '1'.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fieldname.
wa_fcat-tabname = c_tabname.
wa_fcat-reptext_ddic = p_text.
wa_fcat-datatype = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text = 'CUMULATIVE'.
ENDFORM. "BUILD_LAYOUT
*& Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_events
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc = 0.
READ TABLE it_events INTO wa_event
WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
APPEND wa_event TO it_events.
CLEAR wa_event.
ENDIF.
ENDIF.
ENDFORM. "BUILD_EVENTS
-->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. " SUB_COMMENT_BUILD
*& Form SUB_SET_VARIANT
text
--> p1 text
<-- p2 text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM. " SUB_SET_VARIANT
*& Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
i_callback_pf_status_set = c_pf_status
i_callback_user_command = c_user_command
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort[]
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas. -
Report : How to show all the reports in Content Management
Hi,
Can anyone tell me how I can show the "Resource Locks" Report in Portal.
I can see 4 reports through Content Management -> Reports i.e. Approval Maintenance, Link Consistency, Resource Statistics, Time-based publishing.
If I want to add more reports over here than "How I can achieve it".
Also I have seen the settings System Administration -> System Configuration -> KM -> CM -> Repository Managers -> Reporting Repository
But here I find no combo box for Active Reports, so from where I can activate the reports and show them in Content Management -> Reports
Please help me.
Regards
DeepDeep,
Are you talkign about the report which give you details of which Portal Objects are currently locked?
If yes, then you can go to System Adminitrator > Monitoring > Object Locking
Hope this helps,
*Points will be appreciated. -
The database migration report don't show all the erros at creation time
Hello experts,
I'm using omwb to migrate a sql server database, i realize that at creation of oracle model there are few stored procedures that was not created.. those object doesn't appear in the Errors_and_Warnings_report.htm but in the logs. My question is why the report don't show those objects?
Another question: how to list the objects that the tool was unable to create in the oracle model?
best regardsHHerrera,
Are the stored procedures that were not created, but were not in the in the Errors_and_Warnings report, visible in oracle, i.e. is the text available in Oracle? If so, it would be easy to compile all the objects in your schema and do a select to see which stored procedures were invalid.
Regards,
Turloch -
Reports in GC: show all users with status != 'OPEN' (locked users)
Hello,
I would like to create a report in GC which shows all users of a given database with status != 'OPEN'.
To create a report is not the problem - but which view/table of the GC repository contains the needed information about the status of the database users?
I've already looked through alot of the mgmt$... views - but didn't find any information about the user status...
Any help will be appreciated...
Rgds
JHThe reports of the GC are using the repository of the GC. Therefore you will only find the users of that repository in sys.dba_users. What I need are the users of a database which is monitored through an agent of the GC.
Rgds
JH -
Crystal report paramater not showing all document number in parameter
Hi,
Customer is using Crystal report 2008 add on. The DO is having Doc Number in crystal report parameter. Eg DO in system had reached #1000 but it crystal report parameter user can only view DO up to 800. Is there any limitation in Crystal parameter if the records are many? How to resolve?
Regards
ThomasDO=Delivery Order in Sales A/R module.
Customer is using Crystal report to print Delivery Order. DO DocNum is parameter in Crystal report for user to select which DO to print out but the selection list did not show all DO No.
I saw similar question in forum. I had added "MaxRowsetRecords" ='99999999' into registry but the parameter still doesn't show all the DONo.
I am using Type=REG_DWORD, value data=99999999 in registry and in crystal report the DocNum parameter is having "Dynamic" type.
Don't know whether the setting is correct. Sorry I am not a Tech guy.
Please advise.
Regards
Thomas -
Report / Query to show all texts within all customer master records
Hi,
Can anyone let me know if there is a report or a query to show all texts within all customer master records?
Many Thanks
AriesHello Aries,
I don't believe there is a standard SAP report that does this.
But,...
You can see all the customer text types (Customer SD) using transaction VOTX.
Table TTXID contains the same info using Text Object "KNVV".
If you decide to have a custom ABAP developed use function READ_TEXT. SE37 can be used to validate a test.
Regards,
Jim -
Incomplete Data on report (report does not show all records from the table)
Hello,
I have problem with CR XI, I'm running the same report on the same data with simple select all records from the table (no sorting, no grouping, no filters)
Sometimes report shows me all records sometimes not. Mostly not all records on the report. When report incomplete sometimes it shows different number of records.
I'm using CR XI runtime on Windows Server 2003
Any help appreciated
Thanks!Sorry Alexander. I missed the last line where you clearly say it is runtime.
A few more questions:
- Which CR SDK are you using? The Report Designer Component or the CR assemblies for .NET?
- What is the exact version of CR you are using (from help | about)
- What CR Service Pack are you on?
And a troubleshooting suggestion:
Since this works on some machines, it will be a good idea to compare all the runtime (both CR and non CR) being loaded on a working and non working machines.
Download the modules utility from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip
and follow the steps as described in this thread:
https://forums.sdn.sap.com/click.jspa?searchID=18424085&messageID=6186767
The download also includes instructions on how to use modules.
Ludek -
How to create a report which will show us the hierarchical stucture
Hi all,
I am using financial reporting studio for reports.
I have a planning appliaction. And i used Zones as the Entity Dimension.
Now I am trying to create a report for users to see my entity dimension hierarchy.
Something like Zones
East
West
North
South
I am able to generate the report but the hierarchy of the Zones does not show up..
Can anybody advice if there is a option in Financial Reporting to make the hierarchy structure more visible by adding proper indentation between the parent and the child?..
And yes i have used a prompt for the Entity in the report....
ThanksHi Venuramani,
Thanks for ur reply........
Let me explain you properly what I want......
I am getting the hierachical structure , but I am getting the child first,then parent and then
grant parent level members.But I want it in a different way first grant parent, then parent and then
child .Is there any way to do this?Pls advise me.........
Thanks -
Crystal report-can not show all subreport records in main report.
Hi,
I have a mian report (summary) which link to a subreport (details). when I preview that subreport, I have 100 records inside. but, when I preview with main report, only first part of records displayed (first 60 of subreport records).
I took out the link between main and subreport but the result still same.
Anyone can help? it is weird.....
Thanks
Kevin THi Kevin,
I am not able to replicate the problem u r facing.I created a report with Group on country and added a subreport in the Group Footer. My subrepor has more than 270 records. I'm able to see all of them. They are spread across pages.
Please check whether records are spread across pages or the link between Main Report and Subreport is filtering out some records. Other than these two things I dont see any other reason for records being truncated.
Hope this helps! -
Report is not showing all elements
Dear Experts,
In a capital budget expenditure report we made changes and they were working (the structure is Projects contains many WBS elements) fine upto quality. when it is moved to production it is just showing only Projects not WBS elements which are exising under projects. Please advise.
Tanks
Balus
-
Is there a way of pulling a report off CM showing all phones that have diverts on?
Can someone help me with this question ? its for a customer of ours, we need to find a list of phones with diverts on, is there a way of showing this without going through them one by one ?
Try if running this SQL query from the CLI helps you, it should list all DN's that have CFA enabled to VM or a DN:
run sql select dnorpattern,cfadestination,cfavoicemailenabled from CallForwardDynamic c, numplan n where c.fknumplan = n.pkid and (cfadestination != '' or cfavoicemailenabled ='t')
Maybe you are looking for
-
Should I upgrade to Lion or stick to Snow for Office:mac use?
I got a macbook pro 13" without the Lion upgrade, and I want to install Office for Mac. I just use this computer for research, papers and web surfing. Should I install Office:mac 2008 with Rosetta, or upgrade to Lion and get the Office:mac 2011?
-
hi, I have one query for which i am not getting much over net so raising here for help. when we use SELECT FROM DUAL in PLSQL block , is it working like normal SQL query and does it goes every time to oracle server or it will be processed by PLSQL en
-
Charting components for actionscript project
hi - I have an actionscript project going (ie, not flex) and I want to use some kind of charting components I'm complining as desktop appilication, ie, I am running on the AIR platform because it's an actionscript-only project I dont think I can use
-
My Siri is not responding it seems frozen
-
Bugs in Premiere Pro CC 2014 (8.0)
I'm going to file bug reports but just wanted to see if anyone else is having these problems... • setting poster frames - whenever I set a poster frame the chosen frame doesn't stick • video & audio preview folder location - I have my scratch disk fo