Reporting on Virtual Cube - DTP Authorisation is required??

Hi all,
Say there is a Virtual Cube V, i have multiprovider on top of it M, When i am running report on this M, it is saying as there should authorization to run the DTP's.
Is it necessary to have DTP authorizations, to run a report on Virtual cube??
Please let me know how to overcome this, other than including DTP authorizations in the User roles.
Let me know your suggestions.
Thanks,
Sowrabh

Hi Krishnan,
Yes Users needs to run the report in front end.
Can we give authoraztions for only these particular DTPs that to in display mode, so that they can run the queries??
Would there be any issues by doing so??
Thanks,
Sowrabh

Similar Messages

Report on Virtual cube is not working.

Hi,
I created a report on virtual cube, Virtual cube is based on Function module which will pick data from Multiprovider, In the FM mention the import parameter name as " Muli Provider" Name.
Multiprovider built on SPO object , On SPO object BIA is created, If can de activate the BIA on SPO then the report built on virtual cube is working in the portal. If I can activate the BIA the report is not working in the portal.
The report is working fine in RSRT and Analyzer either BIA is active and deactive.
Regards
GK

Hi
The multi cube you created must be comprising of Info cubes, DSO and Info objects. Now this error which you are getting is it for
- a specific characteristics or
- any characterisitcs that is entered fourth in the series of filter selections or
- the fourth value in a specific characteristics
Is the characteristics and the value which you use in filter present in all the underlying objects included in the multi cube ? You can check it in each of the objects associated in the multi cube, independently. This will give you an idea as to whether the error reported by the system is genuine or not.
Cheers
Umesh

Issue when running Balance sheet report on Virtual Cube (0FIGL_V10)

Hi ,
We are actually implementing new General ledger and I activated all the underlying ODS & cubes.
While running standard report(0FIGL_V10_Q0001) on 0FIGL_V10 , I am getting the following error:
Characteristic 0GLACCEXT has a constant value (F) and cannot be used.
Characteristic 0GLACCEXT Financial Statement Item not available in the Infoprovider.
FYI, The above characteristic is available in the cube and I dont know what is the fix for the same.
Can anyone please let me know if the same problem was faced and resolved.
Regards,
Kumar

Hi Sumit,
Thanks for the response.I did following checks in RSRV yesterday before I posted this thread.
Master data checks for 0GLACCEXT went successful but when I checked my Infocube and dimension tables,its giving me the following error:
Diagnosis
There is no dimension table for dimension /BI0/D0FIGL_V102, even though the dimension is not a line-item dimension.
Procedure
Try to reactivate the InfoCube. Data that is contained in the InfoCube is not deleted.
As per the above procedure , I reactivated the cube and tried running the query but it still gives the message,0GLACCEXT characteristic cannot be used.
I can see all the dimensions in the Infocube(0FIGL_V10) coming correctly and I also can reactivate but still the error doesn't go.
I also tried installing the Cube one more time if the error was because of not installing properly and I tried running the report but still I did not get to a resolution..
I am now not sure , what to do to fix this problem.
Regards,
Kumar

Virtual cube reporting logic

I have created report directly out of BCS transactional Totals cube and is giving correct output.
But why does SAP suggest to make BCS reports out of virtual cube, rather than BCS totals cube? Is it more helpful for reporting if COI logic is implemented?
What is the distinct difference reason for creating reports with Virtual cube Vs Transactional cube.
What is the pros and cons of creating report out of BCS Transactional cube vs virtual cube.?
Inputs are appreciated.

Hi Christopher,
In general, you are right.
But, in practice... The restrictions that you mentioned may be very easily avoided. As I wrote here:
COI Equity method...
it's not even necessary to have associated companies in the Group's hierarchy. Hence, at equity method limitation doesn't work in our situation.
The main point here is a general consolidation logic. And the virtual cube performs it perfectly.
Of course, we can devise some situation which the vcube will not be able to handle. Like running the report for a period when a daughter company was already sold or become an associate (drastical org changes).

Report issue on Virtual cube with services

Hi,
I'm following a how-to document to report on a virtual cube using a custom function module and everything seems to be OK except it is dumping at the following line which is included in the How To document "How Tou2026Implement a virtual InfoProvider with Services".
Both <l_s_data> and E_T_DATA are of same data types as discussed in the how-to document.
append <l_s_data> to E_T_DATA
These are the declarations which are same as HowTo document
E_T_DATA TYPE STANDARD TABLE
FIELD-SYMBOLS: <l_s_data> TYPE ANY.
Did any one face this issue. Greatly appreciate any insight into this issue. We are on BW 3.0B.
the dump i'm getting is ...
Data objects in a Unicode program are not convertible.
Error analysis
The statement    "MOVE src TO dst"   requires the operands "dst" and "src" to be comvertible.
Since this statement occurs in a Unicode program, the special convertibility rules for Unicode programs apply.
Thanks,
Hari Immadi
http://immadi.com
SEM BW Analyst

Hi,
In the debugging this is what I found out.. Any further insight?
Virtual cube has only 1 characteristic Z_CRNUM & only 1 keyfigure Z_SR
Report has only Z_CRNUM & Z_SR
<L_S_DATA> has following record & value
component      type     length     contents
K____504     P     9     1.000
S____504     C     18     16EA4D-R
K____504 is the technical name of Z_SR in virtual provider.
S____504 is the technical name of Z_CRNUM in virtual provider.
E_T_DATA (type standard table) has following structure with a total of 5 fields.
S____504    K____504           &KEYEND 1ROWCOUNT   Z_SR
Regards
Hari Immadi
http://immadi.com
SEM BW Analyst

Virtual Cube with DTP for direct access

Hello experts, I would like to hear about some tips to improve performance on reporting over this kind of infoprovider. If there were no performance impact in reporting then this cubes would be perfect to face the requirement we are facing. So I would like to get some help on deciding if we can go ahead with this idea or not.
The volume of information is not going to be small in underlying cube staged in APO source system but we can take care on reports using restrictions and small horizons of information. There is no processing in BW side, we would just transfer records from source system to report.
What else besides restrictions in reports can we do to reduce query performance impact? Any work in underlying cube like partitioning, compression or so?.
Any advice from your experience?.
Thanks so much.

Hi Martin,
There are 2 BCS documents that might give you some starting point on Virtual cubes, if you have a S-userID for service.sap.com/support, these generally discuss the use of Multiproviders, helped by VirtualProviders so you'll have to skip through some redundnat content.
How tou2026 use Deltacache and Deltapair in SEM-BCS (
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063832008E)
How to... configure the Delta Load based MultiProvider Scenario
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000063842008E
or
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323702006E
How to... Set up a SEM-BCS Data Mart in BW;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006323962006E
A generic Virtual provider link that I had lying around;
https://websmp208.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700004124212004E

Use of virtual cube 0FIGL_V10 for reporting on Financal Statements

Dear all,
I am new to the GL reporting and I have a question about the usage of the virtual cube for reporting on Financial Statements.
On the content site I see that you can report your Balance Sheet based on the infocube 0FIGL_C10, where you can use the infoobject 0GLACCOUNT to display the balances.
I also installed the Virtual Cube 0FIGL_V10, which has the infoobject 0GLACCEXT to show the Financial Statement Item hierarchy.
My questions are:
- to create a Balance Sheet Report, is it advisable to use the content query 0FIGL_C10_Q001?
If I run that query now, it is showing the data on seperate G/L accounts, where I would like to see a hierarchy display.
For reporting on the capital expenditure however the requirement is that some G/L acoounts don't have to be taken into account. How can I exclude those then from the hierarchy for that report?
- to create the P&L, advice on the content site is to use the virtual cube because you have the Financial Statement Item hierarchy available there and you can report on specific financial statements.
Can anyone tell me the added value of using the Virtual Cube? Or can I skip it and just add the Financial Statement Item hierarchy in the 0FIGL_C10 cube and create a report where I select the nodes of the hierarchy that are only applicable for the P&L? Will that corrupt the figures or have any other effect?
Thanks in advance for the help!

Hi Sundar,
As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
Hope it helps..
***Assign Points***
Thanks,
Gattu

Advantages of using Virtual cube & Multi Cube for Reporting

Dear all,
Can you please explain me the advantages of desiging Virtual Cube with services & multi Cubes for Reporting.
Thanks in advance
Thanks & regards
Sailekha

Hi sailekha;
Pls go through the link below:
http://help.sap.com/saphelp_nw04/helpdata/en/62/d2e26b696b11d5b2f50050da4c74dc/content.htm
For the multi-cube;
you can create a reports out of different infoprovider...let's say you have infocube for actual and another for plan...you can create a report to see actual and plan both...
Hope this helps.
BK

Querying on aggregates created on Virtual Cube

Hello,
I have implemented a virtual InfoProvider with Services.When I create queries directly on the Virtual Infoprovider the query runs fine and I see the report.
As per my requirement I create an aggregate on the Virtual Infoprovider .Then I define a query on the aggregate .But when I execute this query I get the following errors :
Error reading the data of InfoProvider AG4
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause
Dereferencing of the NULL reference.
Would appreciate any assistance on this topic.
Thanks
Priyadarshi

Yes it is possible to create aggregates on Virtual cubes.
I will be grateful if hope anybody who is aware of the method of aggreagate creation and who has faced similar issues comes forward and throws some light on what could be the error.
Thanks

How to Virtual cube with services works

Hi,
How to Virtual cube with services works.
can anyone provide me a realtime scenerio.
if possible provide some code.
Thanks,
cheta.

For which functinality you are trying to create VC with services.
This is mostly used in SEM BCS.
You have to create cube similar path like normal cube, but select in the properties virtual cube, services.
There is a standard FM which connects the Virtual cube to the required cube in BCS. ( this is done by BCS data basis generation function) and we have to do nothing for FM.
In BCS we use virtual cube only for reporting purpose, since standard BCS cube cannot be used for reporting. hence what we do is create another virtucal cube very smiliar to BCS cube.
Then both the Virtual cube and BCS cube are connected by standard FM.

Incorrect data with Virtual Cube 0FIGL_V10 when used in MultiProvider

Hi All,
I am using 0FIGL_V10 in a multiprovider with 0FIGL_O02 to solve a reporting requirment.
My problem is that I am unable to get the same revenue figure from the multiprovider as I am from the virtual cube alone.
In the multiprovider query I have filtered my revenue KYF's by:
value type
version
currency type
I have fiscal period across the top of the columns and filtered for example to 001.2009 - 006.2009
This query returns double the revenue value that I get if I run an indentical query on the base cube 0FIGL_V10.
I have found that if i filter fiscal period directly in the KYF restriction it outputs the correct result which is confusing.
Any ideas ?
help much appreciated.
Mark

Hi ..
Thanks for the suggestion but this note has already been implemented into our system.
Any other thoughts ?
thanks and regards
Mark

BCS Virtual Cube Cons Group Change

Hi,
We have a number of Bex reports that read from the BCS virtual cube for our month end reporting.
Quite recently, we prerfomed some Cons Group changes in the BCS application which has impacted our Bex reports via the virtual cube.
If we check the contents of the virtual cube with Cons Group displayed in the output, we see it is missing data (period blank) and this is the data that is being extracted to our Bex report.
If however we check the contents of the virtual cube without diplaying Cons Group, then we get our disired result.
Has anyone experienced anything similiar? Is it possible to get Bex to read the data we require?
Thanks in advance.

It is suggested you read the SAP BCS help for cons group changes.
In most cases the cons units should not be removed from the "divesting" cons group when adding it to another cons group. The cons group master data for the "divesting" cons group should simply be updated for these units with a period/year of divestiture - the period of change.
Additionally the cons group changes tasks move the balance sheet items from the "divesting" cons group to the "acquiring" group with posting level 02. 12 and 22 records to allow for reporting of pre- and post- change reporting on these cons groups.

Use of Virtual Cube

Hi All,
In our BI implementation we are building Balance Sheet, Cash Flow statements and we were planning to use Virtual Cube (similar to 0FIGL_VC1 and VC2) but we are trying to explore if there is an alternate approach as Virtual Cubes come with performance issues. Also we need a multiprovider on top of it and these two dont go together well. I want to know if we can achieve this reporting without the virtual cube in place. Any inputs would be really helpful. Please let me know if I was not clear in mentioning my requirements.
Thanks
Sundar

Hi Sundar,
As ravi said the VC can be used when we have leass number of users, basically in VC the structure will be available. And moreover when you generetae a report based on Multiprovider which is based on the VC then it will pick up the data directly from the source to which it has been connected..
Hope it helps..
***Assign Points***
Thanks,
Gattu

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

How to load data from a virtual cube with services

Hello all,
we have set up a virtual cube with service and create a BEx report to get the data from an external database. That works fine. The question is now:
Is it some how possible to "load" the data from this virtual cube with service (I know that there are not really data...) into an other InfoCube?
If that is possible, can you please give my some guidance how to set up this scenario.
Thanks in advance
Jürgen

Hi:
I don't have system before me, so try this.
I know it works for Remote Cube.
Right Click on the Cube and Select Generate Export Data Source.
If you can do this successfully, then go to Source Systems tab and select the BW. Here, Right CLick on select Replicate DataSources.
Next, go to InfoSOurces, click on Refresh. Copy the name of Virtual Cube and add 8 as a prefix and search for the infosource.
If you can see it, that means, you can load data from this cube to anywhere you want, just like you do to ODS.
ELSE.
Try and see if you can create an InfoSpoke in Virtual Cube. Tran - RSBO.
Here, you can load to a database table and then, from this table, you can create datasource, etc.
ELSE.
Create query and save it as CSV file and load it anywhere you want. This is more difficult.
Good luck
Ram Chamarthy

Reporting on Virtual Cube - DTP Authorisation is required??

Similar Messages

Maybe you are looking for