Reports 3.0.5 and Excel Format Report Generation

Hi Folks,
I need to create excel format report on my Windows based OS using Report Desiginer 3.0.5.
Can someone help in this matter as urgent as possible? Your help will highly be appreciated.
Thanks
Zahir

The problem is that you're going to have to jump through hoops to do something that's very, very easy in the release you're going to, so you need to seriously consider where to put your efforts. If you want to do this in 3.0, then you'll need to follow the data file report example in the 2.5 Building Reports manual (see http://otn.oracle.com/doc/reports25/bror2/ch6a.htm#toc096)
Regards,
Danny

Similar Messages

Issues while saving the Webi Report locally in pdf and Excel Format

Hi,
I am getting issues with the images on a Webi Report when I try to save the reports locally on my machine in either a pdf format or in an Excel Format.
I think the issue is that when I am trying to save the report it saves the address of the image binded in the report but it doesn't save the image/download the image and when the report is opened locally it couldn't refer to the image location.
I am using BOXIR2 with SP2.8.
I am not sure what should be the right solution for this. Any insight or resolution will definitely be helpful.

Hi;
I would investigate on the load balancer and/or Apache front end servers, are you sure you don't have a keep alive setting enabled somewhere on one of these servers? in the Tomcat connector maybe?
Regards;
Lionel
OUPS BAD THREAD
Edited by: Lionel Jeanson on Oct 21, 2008 3:30 PM

Reports Requirements using R12 and Oracle 10g Reports

Hi All,
Looking forward to some valuable inputs to propose a technical solution in R12 using 10g Reports Developer.
Requirements are :
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
2. Report Parameters to have multi selection criteria. ( Is this possible in 10g Reports and Oracle Apps, Report Manager responsibility ?)
Regards,
Anand

>
1. Report output should be in Excel Format. ( Is this possible without XML Publisher using 10g Reports only )
>
Yes, Reports can create output in Excel - but XML Publisher offers better and easier options.
>
2. Report Parameters to have multi selection criteria. ...
>
Pl explain what you mean by multi selection criteria.
HTH
Srini

CF Report Builder and Excel format

Hi Everyone,
I was trying to display a report in excel format in report builder. It shows the data, but I do not find the print button options, whereas I can see it with other formats. Is this the way it is, or do I need to format anything more within my report for showing up the print button option?This is only happening for excel format
Thanks

Hi Keiko,
Yes, CF Report builder is new and initially there was few
issues with this. But I guess now it's good after hotfixes.
Well, I am using CF Report Builder. It's good for me. You can
also design and develop complex reports, that depends upon the
query you are writing. You can also add subreports to your main
reports.
Mainly CF Report is platform independent and you can also
generate reports in PDF, EXCEL and FlashPaper.
Crystal Report is no doubt is very good, and it's there for
long years. I agree you can create complex reports with this, but
you also can do the same in CF also. You are using this for last 10
years, so I guess you should try something new and that is CF
Report Builder and you can judge then.
I am sure you will have fun with CF.
Thanks
Sankalan
(www.mindfiresolutions.com)

Crystal reports 13.5 : Export to excel formatting

Hi. We are developing web application using VS 2010. We are using crystal reports 13. Initially we had VB6 application which used crystal reports 8.5. The format for excel report generated by crystal report 8.5 and crystal report 13.5 is different. We are using the export option in crystal report viewer for both reports. Is there any way in which we could make changes to crystal reports 13.5 to achieve similar excel formatting as crystal reports 8.5.

Hi Pooja,
Back in CR 8.5, it was the RDC COm SDK (CRAXDRT.dll) and with CR for VS 2010 it is .NET SDK which are two complete different SDKs and could not be compared.
However, the .NET SDK should export the report same as it is exported through CR designer.
Could you export the report in a newer designer possibly CR 2008 or CR 2011/2013 and compare the exported output with your .NET SDK export?
You could get the trial free download for CR desiner here.
http://www.sap.com/solution/sme/software/free-trials.html
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

Oracle reports to be generated in excel format

Hi,
We are currently exporting the oracle reports to PDF and CSV format using Report Builder 10.1.2.0.2.
we would like to export the report to xls or xlsx format.
is there any way we can achieve with the current version of report builder.
ANy valuable information in this regard would be greatly appreciated.
Thanks in Advance!!!

in reports 10 you can generate spreadsheet as output and you can save name.xls and you can open with excel
if you runs in production environment the format is spreadsheet from forms you can show on the browser and the user can saves as xls

Tax Reporter: magnetic media files in Excel format

Most of the state agencies websites require a "Microsoft Excel Comma Separated Values File" or a regular Excel file for SUTA reports to be able to upload them online.
Is it possible to generate the magnetic media files from Tax Reporter in one of these two formats?
Not sure if I was missing a step or not, but the files are automatically generated in XML format.

Hi Tatiana,
May be below link would help you.
PA SUI Magnetic media issue
Just try doing the steps and see if it helps let you save file to csv.
Thanks,
Ameet

Composing the URL to call a report to render in the Excel format - SSRS 2012

Hi,
I've a report that I need to call by an URL. I've composed this link, using the rs:Format=EXCEL command, but I've an error because the max number of rows is 65.536 for the current version of Excel and the extracted data are more of 150.000 rows. On the report
server is installed Excel 2013 and so this error it seems strange: the limit of 65.536 rows refers to an older Excel version than Excel 2010.
My idea is to pass in the URL string a client command, but rc:Format=EXCEL doesn't function.
Any suggests to me, please?
Thanks

Hi pscorca,
Per my understanding that when you export the large data report to excel by adding the commend "rs:Format=EXCEL" in the URL, you got some error, right?
As you mentioned that you are using the new version of excel, so the issue can be caused by the reporting service have some limitation rendering the large data report.
Please design the report to add page break and parameters which will also avoid some limitation of the excel:
When you add page breaks in the report. Each page break will defines a new sheet in Excel. Each sheet can handle a maximum of at least 65000 rows. Consider these limits when you set the page breaks in a report.
For exporting to Excel, do not merge cells in a Tablix data region. In free form reports, align report items vertically. Merged cells and unaligned report items interfere with Excel functionality in the exported report.
You have mentioned that pass "rs:Format=EXCEL" in the URL string a client command, but doesn't work, please check to make sure you add the commend after the Report URL of the report Server but not report manager.
Pass a Report Parameter Within a URL
More Details information for your reference:
Troubleshooting Reports: Report Performance
If your problem still exists, I would like you post us the error message you got to help us better analysis about the issue.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Oracle Report vs JSP efficiency and Excel XML in Web Source Questions

I have used Oracle Reports in the past 6i, but haven't used them in about 4 years. We are now using 9.0.4 reports and I am trying to generate Excel XML from an Oracle report by manipulating the web source of the report. Basically copying and pasting the Excel XML into the web source of the Oracle Report instead of html as suggested by this Metalink Doc ID 240819.1. I do have a JSP working example that generates Excel XML created in JDeveloper and successfully spawns off a very nice looking Excel spreadsheet.
However, a statement was made here by our app sever guy that an Oracle Report is more efficient at getting data from the database than a JSP. The app sever section does not want anyone using JSPs to generate a report of any kind. I guess small web pages are OK since our java guys use them all the time. This rule for a Reports only environment seems a little restrictive to me. Is there any truth to the statement that Oracle Reports bulk collects data in one chunk as opposed to a JSP making multiple trips to the database from the middle tier?
Secondly, if an Oracle Report is more efficient in the way that it collects large record sets from the db, and if I save an Oracle Report as a JSP not an rdf, and use the reports_tld.jar with the rw tags instead of the typical jsp jstl tags, will I still get the same improvement from using an Oracle report? I guess the improvement is in the library used correct?
Thirdly, although not part of this forum, I also am assuming that if we have single sign on that when I call a JSP from an Oracle Form I will not have to log in again correct?
Thanks...
Message was edited by:
Mark Reichman

It could be the configuration issue. Reconfigure the engine.

Can a SAP report output by email in excel format?

we have some batch jobs for SAP reports running & sending the result to user by email every month, currently the format only in PDF file, is it possible to send the reports as mail attachments in xls format?
Edited by: hcy h on Feb 3, 2010 4:11 PM

Hi,
It is possible. Please refer to the code:
http://wiki.sdn.sap.com/wiki/display/ABAP/SendExternalMailwithattachment
Regards,
Naveen

HOW to download documents (power point, word and excel) format in my iphone5?, HOW to download documents (power point, word and excel) format in my iphone5?

I have an application downloaded lately called "docs to go" but the problem is i have no idea how to used said application. Can anybody show me how to download docs in powerpoint,excel and word format be downloaded to my iphone 5? does it applicable?

My guess is it is done like this. Connect you phone to computer, select phone from the left column, click on apps tab on the right in iTunes. Then scroll down to the app called Docs to go in file sharing list, select the app in that list then click on add

Display:tag and excel formatting

I am using the display:tag (http://displaytag.sourceforge.net/) code currently. I have a separate jsp for my excel dumps. However, when I export to excel, any leading zero's I have are shaved and dropped off by excel formatting. Is there a way to keep these leading zeros when going to excel??
I wasn't sure to format something in my css, then apply the class? Or to put something inside of the <display:column> tag itself.
thx in advance

I believe that is the problem. I have tried putting in quotes, but only get errors. Here is the exact field I need the code on:
<display:column property="ACCTG_LOC_CD7" title="Location" align="right" /><td/>

Report Type for pdf and Excel

I have following code to generate the report for pdf format.
I would like to let users to choose report type 'pdf' or 'excel'
I need pass the user select from user interface to <cfreport format= "PDF" or "Excel".
Can you please advise how I can pass the user select Report Type from lsReportType to my cfReport?
Your help and information is great appreciated,
Regards,
Iccsi
<cfstoredproc procedure="spGetReportType">
   <cfprocresult name="rsReportType" resultset="1">
</cfstoredproc>
<cfreport format = "PDF" template= "MyReport.cfr" query="#myQuery#">
   </cfreport>
<td><select width="50" name="lstReportType" id="lstReportType">
      <cfoutput query="rsReportType">
         <option value="#rsReportType.ReportTypeID#" <cfif (isDefined("form.ReportTypeID") AND form.ReportTypeID EQ rsReportType.ReportTypeID)>selected="selected"</cfif>>#rsReportType.ReportType#</option>
       </cfoutput>
     </select></td>

Change format="PDF" to format="#VariableName#" where VariableName contains the text "PDF" or "Excel".

Reschedule Excel Format Report - An error has occurred: $Proxy5

It seems on the RESCHEDULE function, that if the report was published in the format CRYSTAL REPORTS, you can click the parameters and change them. However, if it is formatted in EXCEL (97-2003 Data Only) and you click the parameters on a reschedule, you get the error: "An error has occurred: $Proxy5" or "An error has occurred: $Proxy4".
BO XI R3
BO Infoview 12.0
Any help is appreciated!
Lewis

It's a known bug, see 1320211 - $Proxy4 Error when entering parameters in rescheduled Crystal Report instance
Create a new schedule instead.
You can pre set all the parameters in the CMC default settings of the document. so it should be really quick

Oracle forms how to create excel format report

hello :)
these are my codes that generates report in live previewer. my problem is how to create an excel report producing the same output i can get in live previewer.
Declare
     pl_id ParamList;
     v_alrt number;
     v_acct_ent_date date;
     v_start_date date;
     v_end_date date;
     v_end_date1 date;
     v_end_date2 date;
     v_end_date3 date;
     v_end_date4 date;
     iss_group varchar2(100);
     monthidentify date;
Begin
     SELECT B.USER_GRP
     INTO ISS_GROUP
     FROM GIIS_USERS A,GIIS_USER_GRP_HDR B
     WHERE A.USER_GRP = B.USER_GRP
     AND A.USER_ID = USER;
Select max(acct_ent_date)
INTO v_acct_ent_date
FROM gipi_polbasic;
     SELECT TRUNC(ADD_MONTHS(SYSDATE, -24))
     INTO v_end_date1
     FROM DUAL;
     select LAST_DAY(:FILTERS.FROM_DATE)
     INTO V_END_DATE2
     FROM DUAL;
     SELECT TRUNC (TO_DATE (:FILTERS.END_DATE), 'MONTH')
     INTO V_END_DATE3
     FROM DUAL;
IF :FILTERS.FROM_DATE IS NULL THEN
          MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
     MESSAGE('Please Enter a starting date in the format "MM/DD/YYYY"');
     GO_ITEM('FILTERS.FROM_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.END_DATE IS NULL THEN
     MESSAGE('Please enter an Ending date in the format "MM/DD/YYYY"');
     GO_ITEM('FILTERS.END_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.FROM_DATE > :FILTERS.END_DATE THEN
     MESSAGE('Starting Date cannot be greater than Ending Date');
     MESSAGE('Starting Date cannot be greater than Ending Date');
     :FILTERS.FROM_DATE := NULL;
     :FILTERS.END_DATE := NULL;
     GO_ITEM('FILTERS.FROM_DATE');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.DATE_FILTER = 'AED' and :FILTERS.FROM_DATE > v_acct_ent_date and
          :FILTERS.END_DATE > v_acct_ent_date then
          MESSAGE('No premium batch production occured between the given dates');
     MESSAGE('No premium batch production occured between the given dates');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
IF ISS_GROUP <> 2 or USER = 'MKMIF' THEN
/* IF :FILTERS.END_DATE <> V_END_DATE2 THEN
          MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
          MESSAGE('DATE PARAMETER SHOULD BE EXACTLY 1 MONTH');
     Raise FORM_TRIGGER_FAILURE;
     END IF;
     IF :FILTERS.FROM_DATE <> V_END_DATE3 THEN
          MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
          MESSAGE('FROM DATE PARAMETER SHOULD BE THE FIRST DAY OF THE MONTH');
     Raise FORM_TRIGGER_FAILURE;
     END IF;*/
     IF :FILTERS.FROM_DATE < V_END_DATE1 THEN
          MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
          MESSAGE('FROM DATE SHOULD BE 2 YEARS BEFORE OR 2 YEARS BETWEEN THE SYSTEM DATE');
          Raise FORM_TRIGGER_FAILURE;
     END IF;
END IF;
IF :FILTERS.DATE_FILTER = 'AED' THEN
     BEGIN
     Select acct_ent_date
     INTO v_acct_ent_date
     from gipi_polbasic where acct_ent_date between :FILTERS.FROM_DATE and :FILTERS.END_DATE;
     EXCEPTION
          When TOO_MANY_ROWS Then
          Null;
          When No_Data_Found Then
          Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
          Message('Premium batch productions can only be done at the end of the month. Kindly check the dates you entered.');
          Raise Form_Trigger_Failure;
     END;
END IF;
     v_alrt := show_alert('PRINT_ALERT');
     IF v_alrt = alert_button1 then
               pl_id:= Get_Parameter_List('tmpdata');
               IF NOT ID_NULL(pl_id) then
                    DESTROY_PARAMETER_LIST(pl_id);
               END IF;
               pl_id:=Create_parameter_List('tmpdata');
                    Add_Parameter(pl_id,'PARAMFORM',TEXT_PARAMETER,'NO');
                    Add_Parameter(pl_id,'start_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.FROM_DATE,'MM/DD/RRRR'));
                    Add_Parameter(pl_id,'end_date',TEXT_PARAMETER,TO_CHAR(:FILTERS.END_DATE,'MM-DD-RRRR'));
                    Add_Parameter(pl_id,'CREDITING_BRANCH',TEXT_PARAMETER,:FILTERS.BRANCH_CODE);
                    Add_Parameter(pl_id,'LINE_CODE',TEXT_PARAMETER,:FILTERS.LINE_CD);
                    Add_Parameter(pl_id,'INTERMEDIARY_NAME',TEXT_PARAMETER,:FILTERS.INTM_NAME);
                    Add_Parameter(pl_id,'INTERMEDIARY_TYPE',TEXT_PARAMETER,:FILTERS.INTM_TYPE);
          IF :FILTERS.Date_Filter = 'AED' then
               RUN_PRODUCT(REPORTS, 'PREM_PROD_AEDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
          elsif :FILTERS.Date_Filter = 'ED' then
          RUN_PRODUCT(REPORTS, 'PREM_PROD_EDALL.rep' ,SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id);
          End IF;
          END IF;
End;
-------------------------------------------------------------------------------------------------------------------------------------------------------------------

Hello,
build a standard report using REPORT BUILDER (Oracle 10g Release 2)
set
DESFORMAT=SPREADSHEET
Regards,
Tarun

Reports 3.0.5 and Excel Format Report Generation

Similar Messages

Maybe you are looking for