Problem in accessing the drill down report via RRI

Hi guru's,
          ThanX in advance for all the stuff you are providing.
I have a problem with the drill down report.I have two reports Q1 and Q2 where Iam navigating to Q2 from Q1 via RRI.But when I try to drill down to the Report Q2 It gets into an unending state of query execution(to say shortly it gets struck).
This report was working fine earlier.But very Recently I encountered this problem.I started debugging the query at RSRT.For the report Q1 just goes fine but when I drill down to Q2 it gets struck.This is the part of code where the report end up in an unending state.Infact it gets struck exactly while calling the method...
"CALL METHOD g_sx_buffer-r_request->read_data"
Fetch the data, using the wait command only with the second parse 
    IF g_s_session_prptys-use_wait = rs_c_false                       
      OR i_mode = rrx1_c_grid_get_mode-wait_fetch.                    
Is data available                                                 
CALL METHOD g_sx_buffer-r_request->read_data
        EXCEPTIONS                                                    
          x_message     = 8                                           
          no_processing = 1.                                          
      CASE sy-subrc.                                                  
        WHEN 1.                                                       
    Necessary for drill to level                                  
     raise no_processing.                                         
        WHEN 8.                                                       
          RAISE x_message.                                            
Can Some one help me out to know what happens at this part of code that is causing the error.
ThanX A Lot,
Regards,
Sukumar

Its better you raise an OSS message on this problem.

Similar Messages

  • Agregated value in original report in not same as the drill down report

    Hello experts,
    I have a issue with the drill down reports.
    Agregated value in the main report is not equal to the agregarated value in the drill down report.
    In my report I have a sales for jan 2011,feb 2011 so on
    For jan 2011 it is some thing $56000
    when I click on this amount it giving the detail level for each region sales and at the end it is giving the total sales for jan 2011 as $98000
    My question is why there such difference in the total amount when we are drilling down?
    Please help me in this regard. I am new to obiee.

    hello
    do you have any filters on this report that would related to measures?
    if so, remove these filters and see if you still get different values;
    rgds

  • [Extend DBI] specify the drill-down report for the custom report column

    Hi,
    I realized two custom reports by using the extend DBI tools:
    1st report displays the sum of invoices amounts grouped by Operating Units.
    2nd report display the details of invoices for all Operating Units
    In the 1st report I specified a link on the column Operating Units to drill-down at 2nd report.
    The problem is how specified the drill-down link so that the 2nd report display only the detail of invoices for the selected Operating Unit?
    Thanks.

    Adding the time dimenstions like Year, Quarter, Period, Week is quite possible.
    Steps would be:
    1. make sure your data source (Table/View has these columns). If you don't have them you can generate them by joining the date of the data table with FIII_TIME_DAY.
    2. Map these new columns to appropriate Dimesnions. (Lile Enterprise Year, Enterprise Quarter etc.)
    Once you have done these two your report will work for the Time Dimensions.
    I dont think its possible to get the Prior Period functionality unless you use a generated datasource.
    Regards,
    Sudeep

  • User can't open  the drill down report in EIS

    Hi Everybody,
    Please help me from this problem.I am using EIS for DRILL DOWN Report generating.But few user can't able to do the report.
    Please show the path how i can resolve the issue.
    Regards,
    999

    What kind of error message (if any) are they getting when they attempt to use the drill through?

  • Report Painter - cannot hide an element selected for the drill-down report

    Dear Experts
    I am using report painter to modify a report by trying to hide a row but getting the following error.
    You cannot hide an element that you selected for the drill-down list
    Message no. K7186
    Diagnosis
    You cannot hide elements that have already been selected for the drill-d
    System Response
    The function was canceled.
    Procedure
    Deselect the relevant row or column from the drill-down list.
    It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
    kindly please help me to solve it
    thanks in advance
    Suresh

    Hi,
    If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
    I copied this standard form  '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
    any help?
    Suresh
    Edited by: rasuresh on Aug 10, 2010 12:44 PM

  • Question on the drill down report  in BI Answers

    In BI Answers, I can drill down a summary report based on the hierarchy defined in the Repository. For example, I have a hierarchy of 5 levels, level 1 to level 5. Now column level 1, level 2, and level 3 are shown and clickable. Click on level 1, level 4 column and data is shown. But level 4 column is shown after level 1 instead of after level 3. Is it possible that when click on level 1 , level 4 column will appear after level 3?

    Don't post the same question twice...
    Is rollup possible in BI Anwsers report?

  • Problem creating Drill-Down report

    Hi,
    I have problem in creating a drill-down report,got confused how to do it. this is my requirement.
    The main portion that will be first displayed contains a group on match_code and has its own detail section. now when the user selects one of these match_code it should drill down to give more information about this match_code, so the Drill down should also have its own detail section that will be hide and drilldown ok.
    If this the proper way to do it. I will be creating a drill down report for the first time.
    Thanks,
    Reena

    Hello Reena,
    If I understand your situation correctly you have a group on match_code and a details and b section. You want the Group Header and Details a sections to appear on the first "page" or drilldowngrouplevel 0. When the user drills down you want the Details b section to appear.
    You can do that using the drilldowngrouplevel function.
    Set the details b section to suppress when drilldowngrouplevel = 0, this section will only appear after drilldown.
    I am not sure if you still want the details a or group sections to appear after drilldown, if you do then there is no need for conditional suppression. If you don't then use a conditional suppression formula for those sections of drilldowngrouplevel <> 0

  • Drill-down to line items in drill-down report (FGI0)

    Dear All,
    I have a problem regarding executing drill down report in FGI0
    When executing the drill down report FGI0 , I try to drill down to the line items from Goto-> line items but it's deemed & I can't run it.
    I searched a lot and found only one link but didn't help
    Customized drill-down report cannot go to line item level (FGI4 and FGI1)
    Please help as it's very important issue

    this is due to authorisation limit.
    Ithink you do not have the access to view the 2009 GL balances.

  • Drill Down Reports on Web CGI

    I have a drill down report that runs with no problems on reports
    runtime. When deployed on the web (we are using the Web CGI
    interface) the report runs and is displayed in the browser in
    Acrobat as it should. However, the button for the drill down is
    not available - it shows on the screen but is not pushable.
    Is there any work around for this?
    Thanks
    PAUL
    null

    Hi,
    You can use the srw.set_hyperlink to create a link or the item you want to have the drill down report , in the properties in the hyperlink property specify the Link.
    In web button's don't work.
    Hope it helps.

  • Drill Down Reporting Tool

    Has anybody worked on the Drill Down Reporting Tool of SAP? I need some help on the output layout.
    We need to display some characteristics on the output and by default the output brings out characteristic text and not the characteristic itself. Does anybody know how to handle this ?
    Regards,
    Sandhya.

    Hi Sandhya,
    Please check the following link and see if it provides any help for your problem.
    <a href="http://help.sap.com/saphelp_46c/helpdata/en/ec/204b6e5733d1118b3f0060b03ca329/frameset.htm">http://help.sap.com/saphelp_46c/helpdata/en/ec/204b6e5733d1118b3f0060b03ca329/frameset.htm</a>
    Regards,
    Sumant.

  • Drill-down Report Customizations

    Hello!
    First, I'm thrilled having found this resource. I really hope someone can help guide me on the 'opportunity' I have here.
    I have created a Shared Analyses report. This report displays a count of Service Requests grouped by Primary and Secondary categories (type and sub-category, respectively)
    The report works great. However, the individual viewing the report has the ability to click on one of the rows and drill-down. The drill-down report lists the following fields:
    Type (primary category); sub-category; service request no.; service request ID; # of service requests (which, at this level, is always 1)
    The question - how can I modify that secondary report to make better sense? I'd like to essentially replace the '# of service requests' column with 'subject'. When I go in to manage analyses I can get to this report by clicking the preview and then clicking on one of the drill-down links (just as the end-user would). However, making changes and saving then results in have this secondary report as the one that shows rather than the top-level report.
    I do hope this makes sense. I appreciate any guidance in modifying the drill-down reports.
    Eddie

    Hi Weesie,
    I highly recommend that you order the CRMOD reporting book my Michael Lairson. That book is a great resource for these types of questions. You can find it on Amazon. This book answers this and many, many other questions you might have about designing custom reports. http://www.amazon.com/Oracle-Demand-Reporting-Osborne-ORACLE/dp/0071593047/ref=sr_1_1?ie=UTF8&s=books&qid=1273756620&sr=8-1
    Drilldown are managed in step 1 of the Build and Analysis window, via column properties. You can remove drilldowns (if you don't want them to show) by choosing "No Interaction" in the Value Interaction type field on the Column Format tab. You can also have them navigate to a custom designed report (which I think is your question) by choosing "Navigate" in the Value Interaction field and choosing the target under the "Add Navigation Target" capability (which shows up when you select Navigate).
    Good Luck and I strongly urge you to order Michael's book,
    Thom

  • Drill down report issues

    Is there a solution for displaying fields only on the drill down report with out it displaying on the top main report.
    Main report columns:
    case id casename location Assignee Asigneegroup
    when i click on case id drill down report appears
    Drill down report columns:
    Task id taskname Assignee assignee group
    my question is that i dont want to see Assignee and assignee group on the main report, I just want to see those columns on drill down report. If i remove those 2 columns on the main report (drill up report), then those columns are not appearing on the drill down report as well.

    i think a drillfilter will solve the problem
    try to add a column and add drillfilter in this column
    good luck
    Amr

  • Drill down report on Report Server

    How to run a drill-down report on Oracle report Server?
    The drill-down report works fine in Client Server. When the same report is tried on Web (Run a reoprt on Web using Oracle Report Server - Oracle Report 6i) it do't work.
    The problem is:
    1)The drill-down button doe't appear as button. It appears as text.
    2)How to pass the parameter from the main report to the drill-down report.
    For Ex. When you click on SS_No on the main report the drill-down report runs to show the salary, 401K deterction etc., for that particular employee.
    Thanks

    I dont understand if you are working in Client server or web
    but...
    If you are running in C/S you can use the host command from
    reports.
    If you are running reports on the web then you should also run
    forms on the web and then you can use the Forms servlet or cgi
    implementation to have a URL that activates the form, or just
    call a static HTML form that activates the form on the web.
    If your report is on the web and your form is C/S then
    As far as I know HTML cannot activate program on the computer
    that views it.

  • Drill Down Report in screen painter

    Hi Experts,
    I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
    First question is how will I have the drill down report (alv list type?) in screen painter?
    Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
    Thanks in advance for all teh support. Points will be rewarded.
    Cheers,
    Kurtt

    Hai,
    Go thru this Threads u ll get an idea,
    Drill down report help
    Re: regarding Drill Down Reporting
    drill down capabilities for an alv grid display field using oops concept
    Regards,
    Padmam.

  • Adding a characteristics to AR Drill down report for line items

    I have raised an OSS note on this, but they deem this to be consulting.
    I have an AR drill down report for line items
    It calls the structure RFRRD20.
    I need to add a value into the characteristics so I can use it in the drill down report.
    I have appended the structure, added a value in TKAF for the field, and it still does not show.
    Has anybody done something similar?
    I am sure this is easy, but only when you know how, so if you know how to do it please can you let me know.
    thanks
    Mark

    Hi Mark
        I am also in the same situation where i need to add two characteristics (invoice date, due date) to the AR drill down reports. I added them to the structure and TKAF table as you did, but still could not get them to the drill down reports (FDI5 or FI1).
       From your posts, i see that SAP's response was that it is not possible to add characteristics to AR drilldown reports? Did they mention any reasons or OSS notes? How did you handle your requirement, were you able to work around?
       Your suggestions would be highly appreciated.
    Thanks
    Vamsi

Maybe you are looking for