Reports are not displaying

Hi BW Experts,
I am trying to execute SD reports. But iam getting the message "No Applicable data Found".
But data is there in Infocube and Reporting Flag is also there.
Recently we added some fields in Infocube and Transported all changes from Development to Production.
Then we deleted previous data from Infocube and we loaded data again.
What may be the problem?
Can anyone tell me the solution?
Thanks & Regards
Anjali

Hi,
R u sure that the data is available in cube and the reporting icon also enabled?
Check whether u have any restrictions, exits in the querry?
If u find any restrictions then check the data in the cube with those restrictions.
Khaja

Similar Messages

  • Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

    We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
    Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
    But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
    Edited by: Chaitu on Mar 17, 2013 8:57 AM

    Chaitu wrote:
    If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
    Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
    Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
    I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
    For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
    Hi Chaitu,
    patchset(10.1.2.3) is applicable for the following releases only:
    Oracle Application Server 10g Release 2 (10.1.2.0.0)
    Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    Oracle Application Server Forms and Reports Services (10.1.2.0.2)
    Oracle Application Server Portal 10g Release 2 (10.1.4)
    Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
    Oracle Developer Suite 10g (10.1.2.0.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
    OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
    OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
    Hope this helps
    Hamid
    * batter discuss at {forum:id=82} forum.

  • Some reports are not displayed in Windows Vista and IE9

    Hi,
    as the title says, I had a problem with Windows Vista.
    I'm using CR2008, VS2008, and .NET 3.5 to develop web form.
    So, in every computer (WXP, W7) with IE9 works fine, but in Win Vista, some reports are displaying in a wrong way.
    You can see a screenshot here
    http://dl.dropbox.com/u/27544299/bad%20cr.PNG
    SP2 installed.
    Any suggestion??
    Thanks.

    CR 2008 SP2 does not support IE 9.
    Upgrade to [CR 2008 SP5.|http://www.sdn.sap.com/irj/boc/support?rid=/webcontent/uuid/10e38d93-7f07-2d10-beae-e739182f8ada]
    - Bhushan.

  • Standard BI reports are not displayed in Web UI

    Dear Experts,
    I have a requirement to get a report on activities based on category, employee responsible and planned activities. So i have used standard report - 0TPLB_0SAL_DS01_Q0005_1 - Activities by category and assigned BI logical system and created logical link and assigned to Business role. I have loaded the data in BI successfully. 
    But, When I login to Sales professional role and click on Report Activities by category, i got "No application data found", then I clicked on Advance analysis from filter area, I can see standard key figures like Interaction log, e-mail, appt, task,  overall result. But i am not using these standard key figures, I have customized my own Categories.
    Is this causing the problem, if so how could i had my custom key figures. If this is not the issue, could please provide some light on how to get data in the report.
    Your help is much appreciated and rewarded.
    Thanks
    Mahesh

    HI Mahesh,
    You already have answer in your question.
    I can see standard key figures like Interaction log, e-mail, appt, task, overall result. But i am not using these standard key figures, I have customized my own Categories.
    As you have you Zcategories, there is no data for the above mentioned categories.
    From Query designer, search your query 0SAL_DS01_Q0005_1
    In Filters you will find many restrictions.
    and in the row/columns - KFs you will find the Categories which are standard.
    You can create a Zquery based on these rows and create KFs for Zcategories.
    Revert back if any more clarifications.

  • CS-MARS Issue - Custom queries/reports are not displaying any data

    I am trying to produce a report to identify which clients are TFTPing traffic to a particular host and then quantify the amount of data being transmitted. These statistics should be available via the Netflow data being exported to the CS-MARS System. However, the queries continuely produce nil results.

    These release notes are for use with the Cisco Security Monitoring, Analysis, and Response System (CS-MARS), Version 4.1.1 running on either a Local Controller or on a Global Controller.
    http://www.cisco.com/en/US/products/ps6241/prod_release_note09186a0080504531.html

  • Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?

    Hi,
       I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
    can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
          CLASS lcl_report DEFINITION
    CLASS lcl_report DEFINITION.
      PUBLIC SECTION.
        METHODS:
          display  IMPORTING l_table  TYPE string
                             l_fcat   TYPE string.
    ENDCLASS.                    "lcl_report DEFINITION
          CLASS lcl_report IMPLEMENTATION
    CLASS lcl_report IMPLEMENTATION.
      METHOD display.
        DATA: gr_table   TYPE REF TO cl_salv_table.
        DATA: gr_columns TYPE REF TO cl_salv_columns_table,
              gr_column  TYPE REF TO cl_salv_column_table,
              ls_fcat    TYPE slis_fieldcat_alv.
        DATA: gr_display TYPE REF TO cl_salv_display_settings.
        DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
              l_field    TYPE string.
        FIELD-SYMBOLS : <fs_table>    TYPE STANDARD TABLE,
                        <ft_fcat>     TYPE STANDARD TABLE.
    Get the ALV object refering to the output table
        ASSIGN (l_table) TO <fs_table>.
        ASSIGN (l_fcat)  TO <ft_fcat>.
        TRY.
            cl_salv_table=>factory(
              IMPORTING
                r_salv_table = gr_table
              CHANGING
                t_table      = <fs_table> ).
          CATCH cx_salv_msg.                                "#EC NO_HANDLER
        ENDTRY.
    Add basic default functionality in the ALV report
    Functions
        l_o_functions = gr_table->get_functions( ).
        l_o_functions->set_all( abap_true ).
        gr_columns = gr_table->get_columns( ).
        gr_columns->set_headers_visible( abap_true ).
    Display the list
        gr_table->display( ).
      ENDMETHOD.                    "extract
    ENDCLASS.                    "lcl_report IMPLEMENTATION
    *& start-of-selection declaration
    START-OF-SELECTION.
      PERFORM :
      get store codes
        get_storecodes    USING      p_stfile
                          CHANGING   it_t001w,
      fetching mard data
        read_mard_data,
      preparing fieldcatalog for Final Data
        create_filedcat   USING      it_t001w
                                     it_site
                          CHANGING   it_fieldcat,
      preparing structure & internal table for Final Data
        create_final_table_structure  USING  it_fieldcat,
      prepare output data
        prepare_final_data.
    *& end-of-selection declaration
    END-OF-SELECTION.
      PERFORM :
      display data
        display_data    USING l_table
                              l_fcat.
    *&      Form  get_storecodes
    FORM get_storecodes  USING    p_p_stfile
                         CHANGING p_it_t001w  LIKE it_t001w[].
      DATA  :
    internal table for RAW
      lt_raw    TYPE truxs_t_text_data,
      rs_site   LIKE LINE OF rt_site,
      l_index   LIKE sy-tabix.
      FIELD-SYMBOLS :
    field symbol for it_t001w
      <fs_t001w>   LIKE LINE OF p_it_t001w.
    calling function module to get Stores Data from File
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
        EXPORTING
          i_line_header        = 'X'
          i_tab_raw_data       = lt_raw
          i_filename           = p_p_stfile
        TABLES
          i_tab_converted_data = p_it_t001w[]
        EXCEPTIONS
          conversion_failed    = 1
          OTHERS               = 2.
      IF sy-subrc <> 0.
        EXIT.
      ENDIF.
      SORT p_it_t001w BY werks.
      CLEAR rs_site.
      rs_site-sign   = 'I'.
      rs_site-option = 'EQ'.
      rs_site-low    = p_dccode.
      APPEND rs_site TO rt_site.
      IF it_t001w[] IS NOT INITIAL.
        LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
          l_index   = sy-tabix.
          CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
            EXPORTING
              input  = <fs_t001w>-werks
            IMPORTING
              output = <fs_t001w>-werks.
          MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
          IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
          append site to ranges
            CLEAR rs_site.
            rs_site-sign   = 'I'.
            rs_site-option = 'EQ'.
            rs_site-low    = <fs_t001w>-werks.
            APPEND rs_site TO rt_site.
            CONTINUE.
          ENDIF.
        ENDLOOP.
        SORT p_it_t001w BY werks.
        SORT rt_site.
      ENDIF.
    ENDFORM.                    " get_storecodes
    *&      Form  create_final_table_structure
    FORM create_filedcat   USING    p_it_t001w      LIKE it_t001w[]
                                    p_it_site       LIKE it_site[]
                           CHANGING p_it_fieldcat   LIKE it_fieldcat[].
      FIELD-SYMBOLS :
    field symbol for p_it_t001w
      <fs_t001w>     LIKE LINE OF p_it_t001w,
    field symbol for p_it_site
      <fs_site>      LIKE LINE OF p_it_site.
      DATA :
    fieldname
      l_fieldname    TYPE slis_fieldname,
    workarea for site ranges
      rs_site        LIKE LINE OF rt_site.
      CLEAR : l_fieldname, rs_site.
      l_fieldname    = p_dccode.
      PERFORM
    prepare fieldcatalog
      build_fieldcatalog USING :   'MTART'      'CHAR'        '5'  ,
                                   'MTBEZ'      'CHAR'        '25' ,
                                   'MATKL'      'CHAR'        '6'  ,
                                   'WGBEZ'      'CHAR'        '20' ,
                                   'MATNR'      'CHAR'        '18' ,
                                   'MAKTX'      'CHAR'        '30' ,
                                    l_fieldname 'CHAR'        '17' .
    create header for excel
      PERFORM create_excel_header USING  : 'Division',
                                           'Divsion Description',
                                           'MC Code',
                                           'MC Description',
                                           'Article',
                                           'Article Description',
                                            l_fieldname.
    loop for creating fieldcatalog
      LOOP AT it_site ASSIGNING <fs_site>.
        READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
                                                                  BINARY SEARCH.
        IF sy-subrc = 0           AND <fs_t001w> IS ASSIGNED AND
           <fs_site> IS ASSIGNED  AND <fs_site>-stock GT 0.
          CLEAR : l_fieldname, rs_site.
          l_fieldname    = <fs_site>-werks.
        prepare fieldcatalog
          PERFORM build_fieldcatalog USING : l_fieldname    'CHAR'   '17'.
        create header for excel
          PERFORM create_excel_header USING  l_fieldname  .
          CONTINUE.
        ENDIF.
      ENDLOOP.
      l_fcat  = 'it_fieldcat[]'.
    ENDFORM.                    " create_final_table_structure
    *&      Form  build_fieldcatalog
    FORM build_fieldcatalog  USING    p_fieldname      TYPE slis_fieldname
                                      p_datatype       TYPE datatype_d
                                      p_length         TYPE intlen.
      DATA : ls_fieldcat    LIKE LINE OF it_fieldcat.
      CLEAR  : ls_fieldcat.
      ls_fieldcat-fieldname   = p_fieldname.
      ls_fieldcat-datatype    = p_datatype.
      ls_fieldcat-intlen      = p_length.
      APPEND ls_fieldcat TO it_fieldcat.
    ENDFORM.                    " build_fieldcatalog
    *&      Form  create_final_table_structure
    FORM create_final_table_structure  USING    p_it_fieldcat.
    Create dynamic internal table and assign to FS
      CALL METHOD cl_alv_table_create=>create_dynamic_table
        EXPORTING
          it_fieldcatalog = it_fieldcat
        IMPORTING
          ep_table        = t_table.
      ASSIGN t_table->*  TO <ft_final>.
    ENDFORM.                    " create_final_table_structure
    *&      Form  create_excel_header
    FORM create_excel_header  USING    p_p_fieldname.
      DATA : ls_header  LIKE LINE OF it_header.
      CLEAR ls_header.
      ls_header-col_name  = p_p_fieldname.
      APPEND ls_header TO it_header.
    ENDFORM.                    " create_excel_header
    *&      Form  prepare_final_data
    FORM prepare_final_data .
      DATA          : l_matnr       LIKE g_matnr,
                      l_werks       LIKE g_werks,
                      l_index       LIKE sy-tabix.
      FIELD-SYMBOLS : <fs_mard>     LIKE LINE OF it_mard.
    Getting No. of Lines in IT_MARD internal table
      DESCRIBE TABLE it_mard LINES g_lines.
      LOOP AT it_mard ASSIGNING <fs_mard>.
        l_index    = sy-tabix.
        IF l_matnr IS INITIAL.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                              l_werks.
        ELSEIF l_matnr <> <fs_mard>-matnr.
          APPEND <fs_final> TO <ft_final>.
          CLEAR l_matnr.
          l_matnr  = <fs_mard>-matnr.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          UNASSIGN : <fs_value>, <fs_final>.
        Create dynamic work area and assign to FS
          CREATE DATA t_line LIKE LINE OF <ft_final>.
          ASSIGN t_line->*   TO <fs_final>.
          ASSIGN COMPONENT 'MATNR'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_mard>-matnr.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        getting Article Type,MC & its Descriptions
          PERFORM get_other_data    USING     l_matnr
                                             l_werks.
        ELSE.
          CLEAR : l_werks.
          l_werks    = <fs_mard>-werks.
          ASSIGN COMPONENT l_werks  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_value> + <fs_mard>-labst.
        ENDIF.
        IF l_index = g_lines.
          APPEND <fs_final> TO <ft_final>.
        ENDIF.
      ENDLOOP.
      l_table  = '<ft_final>[]'.
    ENDFORM.                    " prepare_final_data
    *&      Form  get_other_data
    FORM get_other_data  USING    p_l_matnr
                                  p_l_werks.
      FIELD-SYMBOLS : <fs_mara>     LIKE LINE OF it_mara,
                      <fs_t023t>    LIKE LINE OF it_t023t,
                      <fs_t134t>    LIKE LINE OF it_t134t,
                      <fs_makt>     LIKE LINE OF it_makt.
      READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr.   " BINARY SEARCH.
      IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
        ASSIGN COMPONENT 'MTART'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-mtart.
        ASSIGN COMPONENT 'MATKL'  OF STRUCTURE <fs_final> TO <fs_value>.
        <fs_value>        = <fs_mara>-matkl.
        READ TABLE it_makt  ASSIGNING <fs_makt>  WITH KEY matnr =  <fs_mara>-matnr   BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
          ASSIGN COMPONENT 'MAKTX'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>        = <fs_makt>-maktx.
        ENDIF.
        READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
          ASSIGN COMPONENT 'WGBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t023t>-wgbez.
        ENDIF.
        READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart  BINARY SEARCH.
        IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
          ASSIGN COMPONENT 'MTBEZ'  OF STRUCTURE <fs_final> TO <fs_value>.
          <fs_value>      = <fs_t134t>-mtbez.
        ENDIF.
      ENDIF.
    ENDFORM.                    " get_other_data
    *&      Form  display_data
          text
    FORM display_data  USING    p_l_table
                                p_l_fcat.
      DATA:
    Variable for Object Creation
      o_report TYPE REF TO lcl_report.
      CREATE OBJECT o_report.
      o_report->display( EXPORTING l_table = p_l_table
                                   l_fcat  = p_l_fcat ).
    ENDFORM.                    " display_data

    I don't know how to read the code you pasted or I would have checked this myself.
    Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
    I made a method inside my local class to add the names:
            call method set_colname
              EXPORTING iv_tab = alv_tab
                        iv_colid = 'xxxx'  "fieldname from the table
                        iv_stxt = text-t54
                        iv_mtxt = text-t55
                        iv_ltxt = text-t55.
    METHOD set_colname .
      data:
              alv_cols type REF TO cl_salv_columns_table,
              alv_col type REF TO cl_salv_column.
      TRY .
    *... Change fieldnames
            call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
            call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
            IF iv_stxt <> ''.
              CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
            ENDIF.
            IF iv_mtxt <> ''.
              CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
            ENDIF.
            IF iv_ltxt <> ''.
              CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
            ENDIF.
       CATCH cx_salv_not_found.
      ENDTRY.
    ENDMETHOD. "set_colname

  • Enabled UDF's are not displaying in XL Report Composer.

    Hi,
    I Enabled User Defined Fields (UDF) under manage user defined fields. But itu2019s displaying only Light dimensionu2018s fields. But Dimension attributeu2019s fields are not displaying in XL Report composer. How we can display Dimension attribute fields in XL Report.
    Regds,
    Sampath Kumar.

    Hi,Danie Posthumus
    First of all we are not able to see my User define filed in report composer except for light dimensions type. Only we are getting Light Dimension Data Item type only we are not getting Dimension Attribute Data item type.
    Regds,
    Sampath Kumar Devunuri.

  • Items are not displayed --- REUSE_ALV_HIERSEQ_LIST_DISPLAY

    Hi experts,
    i'm stuck in this weird problem.
    Items (it_items) are not displayed in table. I've cheked with debugger and it_items contains lines.
    Thanks in advance.
    REPORT  z_hier.
    TYPE-POOLS: slis.
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv.
    DATA: it_header LIKE STANDARD TABLE OF zvend_header WITH HEADER LINE,
          it_items LIKE STANDARD TABLE OF zvend_items WITH HEADER LINE,
          g_tabname_header TYPE slis_tabname,
          g_tabname_item   TYPE slis_tabname,
          gs_keyinfo TYPE slis_keyinfo_alv.
    PARAMETERS: lifnr LIKE lfa1-lifnr.
    INITIALIZATION.
      CLEAR gs_keyinfo.
      gs_keyinfo-header01 = 'LIFNR'.
      gs_keyinfo-item01   = 'IDNLF'.
      g_tabname_header = 'it_header'.
      g_tabname_item   = 'it_items'.
    START-OF-SELECTION.
      PERFORM retrieve_data.
    END-OF-SELECTION.
      PERFORM build_fieldcatalog.
      PERFORM display_list.
    FORM build_fieldcatalog.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
    *   I_PROGRAM_NAME               =
        i_internal_tabname           = g_tabname_header
        i_structure_name             = 'ZVEND_HEADER'
        i_client_never_display       = 'X'
    *   I_INCLNAME                   =
    *   I_BYPASSING_BUFFER           =
    *   I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = fieldcatalog
      EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
      CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
    *   I_PROGRAM_NAME               =
        i_internal_tabname           = g_tabname_item
        i_structure_name             = 'ZVEND_ITEMS'
        i_client_never_display       = 'X'
    *   I_INCLNAME                   =
    *   I_BYPASSING_BUFFER           =
    *   I_BUFFER_ACTIVE              =
        CHANGING
          ct_fieldcat                  = fieldcatalog
      EXCEPTIONS
         inconsistent_interface       = 1
         program_error                = 2
         OTHERS                       = 3
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    "build_fieldcatalog

    Hi Dan M.,
    Please follow this...
    CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
        EXPORTING
         i_callback_program             = w_repid
      I_CALLBACK_PF_STATUS_SET       = ' '
      I_CALLBACK_USER_COMMAND        = ' '
         is_layout                      =  wa_layout
         it_fieldcat                    =  i_fieldcat
      IT_EXCLUDING                   =
      IT_SPECIAL_GROUPS              =
       IT_SORT                        = I_SORT
      IT_FILTER                      =
      IS_SEL_HIDE                    =
      I_SCREEN_START_COLUMN          = 0
      I_SCREEN_START_LINE            = 0
      I_SCREEN_END_COLUMN            = 0
      I_SCREEN_END_LINE              = 0
      I_DEFAULT                      = 'X'
      I_SAVE                         = ' '
      IS_VARIANT                     =
         it_events                      =  i_event
      IT_EVENT_EXIT                  =
          i_tabname_header               =  'i_ekpo'  <----
    Pass here header table name
          i_tabname_item                 =  'i_eket'    <----
    pass here item table name
      I_STRUCTURE_NAME_HEADER        =
      I_STRUCTURE_NAME_ITEM          =
          is_keyinfo                     =  wa_keyinfo
      IS_PRINT                       =
      IS_REPREP_ID                   =
      I_BYPASSING_BUFFER             =
      I_BUFFER_ACTIVE                =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER        =
      ES_EXIT_CAUSED_BY_USER         =
        TABLES
          t_outtab_header                =  i_ekpo   -<<----
    Pass here header internal table
          t_outtab_item                  =  i_eket     <<----
    Pass here item internl table
    EXCEPTIONS
      PROGRAM_ERROR                  = 1
      OTHERS                         = 2
    for wa_keyinfo:
    You need to use common fields between header & item.
    for ex:
    wa_keyinfo-header01 = 'EBELN'.
      wa_keyinfo-item01 = 'EBELN'.
      wa_keyinfo-header02 = 'EBELP'.
      wa_keyinfo-item02 = 'EBELP'.
    Hope this can solve your problems.
    Regards,
    Tutun

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Leading zeros are not displaying in the excel

    Hi Experts,
    Leading zeros are not displaying in the excel
    Here is the situation:
    I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
    Normally our material numbers will start with zeros.
    But when I check the email excel file , leading zeros are not displaying.
    Even I checked the application server (AL11) file, zeros are there.
    I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
    Could you please advise, how to display leading zeros to the material number in excel file.
    Thanks in advance
    Raghu

    Application server file showing  zeros infront of the material number.
    1200#  0012401387# XXXXXXXX
    Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
    when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
    I checked custom FUNCTION MODULE . No mistakes in that.
    ===
    Sudhir,
    As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
    Application server file showing like below
    1200#  '0012401387# XXXXXXXX
    ===
    Could you please advise anyone how can we acheive this.
    Thanks

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • GUI status items are not displayed

    Hi all,
    Some parts of gui status are not displayed but some of them are displayed.
    What is the problem?
    Thanks.
    deniz.

    Hi snehi chouhan,
    I have created a program and two gui statuses for this.
    One of them is set at first display of report but not all items.
    Thanks.

  • Oracle Table Values are not displayed when tried to display with Essbase

    Hi,
    I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
    I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
    Please help.
    Regards,
    Paresh

    Hi,
    Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
    If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
    **************BIND THE ITAB ****************************
    DO 2 TIMES.
    APPEND LW_LFBK TO LT_LFBK.
    CLEAR LW_LFBK.
    ENDDO.
    CALL METHOD lo_nd_t_lfbk->bind_table
    EXPORTING
    new_items = LT_LFBK.
    If you want to have dynmic table then take a submit button in the form instead of normal button,
    in onaction submit write a loop every time you click that new submit button it should add a new row.
    use above coding in onactionsubmit instead of doinit.
    Thats it.
    Regards,
    Ravi

  • Business Objects 3.1 reports are not working with IE 10.

    Hi,
    Recently I upgraded my internet explorer to IE10.. Since then business objects 3.1 reports are not opening in IE10.0
    Getting error message "webpage can't be found".
    I am not sure whether BO 3.1 reports work with IE 10.0 or not.
    Please advise
    Thanks
    Sat

    Did you try with other browsers ?
    IE 10 (Compatibility View display mode) with Oracle Java 6 / Oracle Java 7 is supported for BOXI3.1 SP6.
    Please check the PAM for details of your SP level.

  • Reports are not showing correctly

    hi all,
    need a solution for this issue
    thanks

    Hi,
    Have you read this blog? It may be helful for you, please check it.
    http://blogs.technet.com/b/isablog/archive/2010/11/24/when-accessing-tmg-report-hosted-on-iis-images-are-not-displayed.aspx
    http://technet.microsoft.com/en-us/library/bb418935.aspx
    Best Regards
    Quan Gu

Maybe you are looking for