Reports hangs during formating page

hi
I am calling a report in PDF through a report calling form.
If i have a report of more than 200 pages it hangs at a certain page showing as formating page no. xyz
Then i will have to cancel the job or restart the report server.
if the report is of less page it displays without problem.
Thanks
MG

Please try increasing the JVM heap size for the engine. Set jvmOptions for engine as,
<engine id="rwEng" jvmOptions="-Xmx512M" class="oracle.reports.engine.EngineImpl" ....
For more details:
http://download-east.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#sthref213

Similar Messages

  • Report Server report process hangs during formatting reports

    We are using Forms and Reports services stand alone.
    I am printing 2000 reports every day, 5% reports hangs during formatting pages, or at any page number while formatting. Has anybody seen this problem and what was the fix. I am seriously thinking to change the report server and move to crystal reports.

    I am able to run request using Reports service. So this problem may be a setup issue.
    1) Ensure that in $OH\network\admin\tnsnames.ora you have the TNS entry fo the DB connection
    mydb, mydb.com =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = fullHostName)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = service_name)
    If you have multiple Oracle Homes in the same machine please see that you have added tns entry to correct oracle home
    2) Set the logon user for the service . Please follow the steps given below.
    * On the machine that hosts the Reports Server, choose
    Start > Settings > Control Panel
    and double-click Services in the Control Panel folder.
    * In the Services dialog box, choose "OracleORACLE_HOME_NAMEReports[repserver]", where ORACLE_HOME_NAME is the home name of the Reports Server and repserver is the name of the Reports Server instance. The value of ORACLE_HOME_NAME you can see in registry .
    HKLM->SOFTWARE\Oracle\Home<x> -->ORACLE_HOME_NAME
    * Click Startup. The Services dialog window displays.
    * In the Services dialog window, select "This Account" in the" Log On As" section, and select an operating system user name and password. This specifies the user account under which the server process is run. The user running the Reports Server service must have access to anything the server may need.
    3) If these do not solve the issue, please turn ON reports tracing, restart service and post the exception/errors you see in log file here. Also please post the full request URL here.
    To turn ON tracing in $OH\reports\conf\<serverName.conf> , uncomment the trace element.
    The logs can be seen in $OH\reports\logs\server_name.trc and server_name-rwEng.trc
    Workaround
    4) Till the setup issue with windows service is identified, you can workaround the issue by starting server as a standalone executable. For that give ,
    rwserver server=server_name
    Thanks
    The Oracle Reports Team

  • XL Reporter hangs during activation

    Hope somebody could provide solution to our problem.  First of all we are running SB1 2005 version, we performed backup monthly or yearly and version of XL Report  PL 25. We encounter this problem (XL Reporter hang) recently when we restore a previous database from a backup to another server in order for us to review reports made under XL Reporter.  We click the start button to activate XL Report, we waited for it to activate but it  never did.  So we end the XL Reporter process and retry again but the same problem encountered.  We even waited for it for several hours to no avail.  It did not even suggest error message.
    We appreciate for the support you could provide us.
    Thanks

    When you say when we restore a previous database from a backup to another server, you have to make sure the other server has exact environment like your current server.  That would be extremely difficult to match.  However, without match the chance for your XLR to run smoothly would be slim.  May I know why you need to restore your db to another server?
    Thanks,
    Gordon

  • Disk Utility Hangs during format

    Yes, I've seen a hundred other posts on this but all have been archived with no solution.
    It seems very likely there is a 10.4 problem. When I try to format a 160GB drive connected via USB Disk Utility hangs and never completes. I have tried to partition it as well with no luck.
    Is there a fix? Is Apple working on the problem? Is there a workaround? Even a commandline fix would be acceptable.

    This is ridiculous. I have tried 4 different physical drives in 4 different physical enclosures (3 different brands) and it still hangs Disk Utility.
    I know I'm not the only one with this problem. What the **** is going on? I can't format a disk and therefore I can't use it. This is absolutely unacceptable.
    Sometimes my machine hangs in such a way that I can't even reboot it, it requires a physical power down.
    I have been forced to format these on a Windows machine with FAT32 (using a 3rd party app to get past the GB limitation MS sets). I don't want FAT32, I want HFS+. But I can find no other way to do this in Tiger as it ALWAYS hangs regardless of drive, enclosure, filesystem type, size, number of partitions, etc, etc.
    Is OS X truly this bad that it can't even format a drive properly? Am I really going to have to rely on Windows and FAT32 whenever I want to format?

  • Formatting Page 1 Error

    Dear All,
    Your help is highly appreciated.
    When I created report layout by using report wizard, it hang at "formatting page 1"
    I go through the following steps when creating a report
    1. create table called bonus1
    create table bonus1 (ename varchar2(50), job varchar2(20), sal number, comm number);
    2. Create a database package as follows:
    create or replace package bonus_pkg1 as
    type b_cursor is ref cursor return bonus1%rowtype;
    procedure bonus_refcur (bonus_data in out b_cursor);
    end bonus_pkg1;
    create or replace package body bonus_pkg1 as
    procedure bonus_refcur(bonus_data in out b_cursor) as
    begin
    open bonus_data for select ename, job, sal, comm from bonus1;
    end;
    end bonus_pkg1;
    3. Create a new report.
    In the data model, create a 'Ref Cursor Query' by clicking on the PL/SQL icon.
    Use the following code in PL/SQL block:
    function QR_1RefCurDS return bonus_pkg1.b_cursor is
    refcur bonus_pkg1.b_cursor;
    begin
    bonus_pkg1 .bonus_refcur(refcur);
    return refcur;
    end;
    4. Create the report layout by using the report Wizard and encountered the "formatting page 1" error.

    Hi,
    Please provide the environment details along with the web browser version information.
    Before that my suggestion is to upgrade to CR 2008 as XI is out of support and also you can download lestest version of CR Java SDK's from below link
    http://www.businessobjects.com/campaigns/forms/downloads/crystal/eclipse/datasave.asp
    on this page select the link below Runtime Libraries.
    Thanks,
    Nilesh Benke

  • Issue while exporting report in Excel Format

    Hello,
    I am facing problem while exporting the report in Excel Format. After analysis, I think that it could be due to two reasons, either we are using wrong versions of Jars, or we are using wrong API. Here is the code, approaches and problems we are facing. Please help.
    First approach we are using is:
    // using basic API
    import com.crystaldecisions.reports.sdk.ReportClientDocument;
    // get client document from crystal report API and open the report by specifying the report name, with path
                   ReportClientDocument reportClientDoc = new ReportClientDocument();
                   reportClientDoc.open( reportPath, 0 );
                   // give chance to extending classes to configure the report document by POJO or by sql parameter etc, just adding the parameters infromation using ParameterFieldController
                   configureReportDocument( reportClientDoc, reportMetadata, reportData, reportContext );
                   // get data source of crystal report
                   Object reportSource = reportClientDoc.getReportSource();
                   // export the data - we have also tried with MSExcel format
                   ReportExportFormat exportFormat =  ReportExportFormat.recordToMSExcel;
                   LOGGER.debug( "exportFormat[" + exportFormat + "]" );
                   ByteArrayInputStream byteArray = (ByteArrayInputStream) reportClientDoc.getPrintOutputController().export(
                             exportFormat );
    Problem Faced: Specified Excel format is not supported.
    Second Approach: We come to know that excel format is supported with new releases and with occa package.
    Then we tried with import com.crystaldecisions.sdk.occa.report.application.ReportClientDocument; It ask to set the ReportServer. When we are trying to set the server as
                   reportClientDoc.setReportAppServer(ReportClientDocument.inprocConnectionString);
    Application is unable to find 'ReportClientDocument.inprocConnectionString' property. It seems like we are using some old jars. However we have downloaded the latest released jars for eclipse 2.
    Please help for it. Issue is to export the report in excel format, which is currently working fine for PDF. If this problem is related to Jars, please suggest the path to download the latest jars. We also looking for the latest jars like rasapp and rascore etc. But these are not available with Crystal Report for Eclipse 2 release.
    Waiting for urgent help. Thanks you..
    Regards,
    Mohit

    Hi,
    Send me Environment Details .
    Here is the code  snippet for exporting report to excel format:
    <%@ page import="com.crystaldecisions.sdk.occa.report.application.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.definition.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.data.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.lib.*" %>
    <%@ page import="com.crystaldecisions.sdk.framework.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.managedreports.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.infostore.*" %>
    <%@ page import="com.crystaldecisions.sdk.occa.report.exportoptions.*" %>
    <%@ page import="java.util.*" %>
    <%@ page import="java.io.*" %>
    <%
    String username ="Administrator";
    String password ="";
    String cmsname ="localhost:6400";
    String Authen ="secEnterprise";
         //connecting to Enterprise
         IEnterpriseSession es = CrystalEnterprise.getSessionMgr().logon(username,password,cmsname,Authen);
         //get the report App Factory form the Crystal Enterprise
         IReportAppFactory appFactory = (IReportAppFactory) es.getService("","RASReportService");
         //get the infostore service form the Crystal Enterprise
         IInfoStore istore = (IInfoStore) es.getService("","InfoStore");
         //get the report by name from crystal Enterprise
         IInfoObjects iobjects = istore.query("Select * From CI_INFOOBJECTS Where SI_NAME = 'sampleramz2.rpt' and SI_INSTANCE = 0 ");
         //open the report in the report doc object.
         ReportClientDocument Doc = appFactory.openDocument((IInfoObject)iobjects.get(0), 0, Locale.ENGLISH);
         // WORKING WITH THE PRINT OUTPUT CONTROLLER
         //Use the report documents PrintOutputController to export the report to a ByteArrayInputStream
         ByteArrayInputStream byteIS = (ByteArrayInputStream)Doc.getPrintOutputController().export(ReportExportFormat.recordToMSExcel);
         // EXPORTING THE REPORT
         //Create a byte[] (same size as the exported ByteArrayInputStream)
         byte[] buf = new byte[2000 * 1024];
         int nRead = 0;
         //Set response headers to indicate pdf MIME type and inline file
         response.reset();
         response.setHeader("Content-disposition", "inline;filename=ramz");
         response.setContentType("application/xls");
         //Send the Byte Array to the Client
         while ((nRead = byteIS.read(buf)) != -1)
              response.getOutputStream().write(buf, 0, nRead);
         //Flush the output stream
         response.getOutputStream().flush();
         //Close the output stream
         response.getOutputStream().close();
    %>
    Let me know any information is needed,
    Regards,
    Rameez

  • Reports hangs: formatting page N....

    Hello,
    I have form letter report in oracle report 10g. This report has many format triggers and formula columns. The problem is these reports sometimes hang and others not.
    Any idea???
    Thanks!!!!
    Is urgent. I am desperated.

    Hello,
    See the thread HP-UX: Oracle AS 10g Reports server hangs
    (Reports engine attribute engineResponseTimeOut )
    Regards

  • How to generate report in pdf format through a JSP page

    I require to generate my report from my JSP page into a PDF format . How can i do it?

    Use a Java API which can create PDF files based on some collection of plain vanilla Java objects (List, String, Number, etc).
    Google can find them all. Just feed it with something like "Java PDF API" or so. A commonly used one is iText.
    That said, when talking about this in JSP context, ensure that you do NOT write raw Java code in JSP files using scriptlets. Raw Java code belongs in Java classes. In such case you need a Servlet. In JSP just use taglibs and EL to interact with backend Java code and data. Scriptlets are discouraged since over a decade.

  • Getting page no. when generating report in  XML format

    hi all,
    could any one tell me. How to get page no's in XML reporting.
    Is there any facility to assign physical page no. to an other variable?
    regards,
    Vasu

    Hi Kishore,
    I have a report (D2K) of 10 pages. Normally for getting page no.s on report, we will have a field and we will assign source as physical page no. But if give like this, i am not getting page no.s when i am generating report format as XML.
    regards,
    vasu

  • IPad2 hangs during eBay search. goes to middle of page and will not allow you to go forward or back, but returns to the middle of the page. mouse can move cursor, but it goes back to the middle of the page. deleting app no good. only during search.

    Ipad2 hangs during ebay search and only during ebay search. goes to middle of page and you can move the mouse anywhere but the page returns to the middle of the page it jammed on. you can do other ebay things and no problem, just hangs during item search. deleted ebay app and reinstalled. same thing occurred again. can search with Safari. can go to other shopping pages and search is unhindered. this one has stumped the pros. need help. thanks.

    How are you using a mouse with an iPad?

  • Crystal Report hanged at the 16374 pdf softcopy generated

    To whom it may concern,
    Recently, we have encountered a Crystal Report Problem during generating softcopy in PDF format.
    When the Crystal Report generated 16374 pdf softcopy, the Crystal Report program is hanged and without error.  It is replicable error and we have tried many times.
    Do you have any idea what is the cause of the issue?
    Thanks for your help.

    As you are using VS .NET I moved your post to the SAP Crystal Reports, version for Visual Studio SCN Space
    As I understand the issue, you are exporting report / reports(?) to pdf in some sort of a loop(?).
    You are able to export 16374 times, then the app stops processing and hangs.
    I'd like you to address the above two question marks please as these are assumptions and you need to clear these up.
    Next, provide the version of CR you are using - please be precise.
    Also, version of VS.
    Note that you should be be cleaning up your objects - the reports as well as the dataset - e.g.; use .close and .dispose.
    Check the hard drive - make sure you are not running out of HD space.
    Check the %TEMP% directory and clean that out.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter
    https://twitter.com/SAPCRNetSup

  • Generating BIP report in RTF format generates blank report

    Hi all,
    When generating a BIP report in RTF format the report output is blank!?
    If I run the report in any other format the report displays the data correctly.
    We're running siebel 8.1.1.2 and BIP 10.1.3.4.1.
    When looking at the size of the report when the 'File Download' window appears it seem like the report contains data as the size is 62KB, compared to the pdf format which do display data is 20KB. The output generates the amount of pages that is needed for the report, but all pages are blank.
    The report is an activity List report with just one for-each statement in it.
    Has anybody come across the same?
    Regards,
    Hakan

    Hi alka,
    To invoke Word automatically, use command
    line options DESTYPE=CACHE,
    DESFORMAT=RTF and MIMETYPE=application/msword.
    This is an example URL: http://webserver:80/cg-bin/rwcgi60.exe?module
    =test.rdf&userid=scott/tiger@mydb&
    destype=cache&desformat=rtf&mimetype=application/msword&server=myrepserver
    1. Check the appropriate mimetype setting for Word by Starting Windows Explorer,
    choose View -> Options from the menu, go to the File Type tab, find Microsoft
    Word Document in this list, click Edit, and get the value for Content Type
    (MIME). This is the value that needs to be used in the MIMETYPE command line
    option, and it will typically be application/msword, but may differ on
    different machines.
    null

  • Modification in report into ALV Format

    Hi Experts
    How can I modify this report in ALV Format with Top of page and Parameters should be display on runtime.
    Can anyone modify my program please
    Thanks in advanced.
    REPORT FZEL LINE-SIZE  220 LINE-COUNT 75
             NO STANDARD PAGE HEADING.
    TABLES : equi,
             equz,
             imptt,
             imrg,
             eqkt,
             iloa.
    TYPES:  BEGIN OF ty_data  ,
             equnr      type equnr,         " Euipment no
             eqktx      type eqkt-eqktx,    " Equipment Text
             eqfnr       type iloa-eqfnr,     " Equipment Sort field
             idate      type imrg-idate,    " Measuring Date
             recdu      type imrg-recdu,    " Unit of measuring ='KM','L','H'
             recdv      type imrg-recdv,    " Counter reading data
             cancl       type imrg-cancl,
           END OF ty_data.
    TYPES: BEGIN OF ty_final,
             equnr           type equnr,            "  Equipment no
             eqktx           type eqkt-eqktx,       "  Equipment Text
             eqfnr           type iloa-eqfnr,       "  Equipment Sort field
             idate               type imrg-idate,       "  Measuring Date
             min_date_km     type imrg-idate,       "  Min Date
             min_km          type imrg-recdv,       "  Max Km
             max_date_km     type imrg-idate,
             max_km          type imrg-recdv,       "  Min km
             t_max_min_km    type imrg-recdv,       "  Total min_km-max_km
             min_date_hr     type imrg-idate,       "  Max Date
             min_hr          type imrg-recdv,       "  Max hr
             max_date_hr     type imrg-idate,
             max_hr          type imrg-recdv,       "  Min hr
             t_max_min_hr    type imrg-recdv,                "  Total min_hr-max_hr
             min_date_lit    type imrg-idate,
             min_lit         type imrg-recdv,       "  Min lit
             max_date_lit    type imrg-idate,
             max_lit         type imrg-recdv,       "  Max lit
             fuel_con        type imrg-recdv,       "  Total_hrs / t_max_min_hr
             fuel_con2       type imrg-recdv,       "  Total_hrs / t_max_min_hr
             km_l            type imrg-recdv,       "  t max_min_km / t_max_min_lit
             l_p             type imrg-recdv ,          "  t_max_min_lit / t_max_min_hr
             l_p2            type imrg-recdv ,
           END OF ty_final.
    DATA: i_data TYPE TABLE OF ty_data, " internal table
    wa_data TYPE ty_data, " work area
    i_final TYPE TABLE OF ty_final, " internal table
    wa_final TYPE ty_final. " work area
    SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
                    p_idate FOR imrg-idate.  "NO-EXTENSION NO INTERVALS OBLIGATORY,
                   "p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blk1.
    SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
    SELECTION-SCREEN END OF BLOCK blk2.
    SELECTION-SCREEN END OF BLOCK blk.
    TOP-OF-PAGE.
      FORMAT INTENSIFIED ON.
      WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED  '.
      WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED   ,
              2 'Page', sy-pagno.
      FORMAT INTENSIFIED OFF.
      WRITE:/50(40) '----
    ' CENTERED .
      FORMAT INTENSIFIED ON.
      WRITE:/2 sy-datum COLOR 3, sy-uzeit .
      "WRITE:/1 S903-SPMON ."p_yearf.
      ULINE.
      "CENTERED.
    write: /2 'Equipment No :'left-justified,p_equnr-low  color 2 , '  to   '  , p_equnr-high color 2.
    write: /2 'Date From    :', p_idate-low color 2 ,  ' to  '  , p_idate-high color 2.
    "write: /2 'Sort Field:'left-justified,p_eqfnr-low  color 2 , '  to   '  , p_eqfnr-high color 2.
    SKIP.
      ULINE.
    WRITE:/1 sy-vline,
        2   ' EQUIP#',                10 sy-vline ,
        11  ' NAME',                  40 sy-vline,
        41  ' SORT',                  60 sy-vline,
        61  ' START DATE',            74 sy-vline,
        75  ' END DATE',               87 sy-vline,
        88  ' START KM',              100 sy-vline,
        101 ' END KM' ,               113 sy-vline,
        114 ' TOTAL KM',              126 sy-vline,
        127 ' START HR',              139 sy-vline,
        140 ' END HR',                152 sy-vline,
        153 ' TOTAL HR',              167 sy-vline,
        168 ' FUEL CON ',             180 sy-vline,
        181 ' KM L',                  193 sy-vline,
        194 ' LIT PER HR ',           206 sy-vline,
        207 ' EQUIP NO',              220 sy-vline,
        223 'KM L',                  232 sy-vline,
        233 'LIT PER KM',            245 sy-vline,
        246 'TOTAL L/HR',            258 sy-vline.
      FORMAT COLOR 3 ON.
      ULINE.
    END-OF-PAGE.
    START-OF-SELECTION.
    select aequnr deqktx feqfnr eidate erecdu erecdv
    into table i_data
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate and
    e~cancl ne 'X'.
    loop  at i_data into wa_data.
    CLEAR: wa_final.
      READ TABLE i_final into wa_final
               with key equnr = wa_data-equnr." BINARY SEARCH.
        if sy-subrc EQ 0.
          PERFORM F_GET_MAX_DATA.
          PERFORM F_GET_MAX_HOURS.
          PERFORM F_GET_MAX_LIT.
          PERFORM prepare_final_rec USING'M'. " Modify Existing Record
         ElSE.
          PERFORM prepare_final_rec USING'A'. " Append New Record.
        ENDIF.
        ENDLOOP.
        LOOP AT i_final into wa_final.
    on change of wa_final-equnr.
    WRITE:/1 sy-vline,
    2  wa_final-equnr                                                       , 10 sy-vline,
    11 wa_final-eqktx                                                       , 40 sy-vline,
    41 wa_final-eqfnr                                                       , 60 sy-vline,
    61 wa_final-min_date_km  color 2                                        , 74 sy-vline,
    75 wa_final-max_date_km  color 2 LEFT-JUSTIFIED                         , 87 sy-vline,
    88 wa_final-min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   color 3       , 100 sy-vline,
    101 wa_final-max_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED   color 3      , 113 sy-vline,
    114 wa_final-t_max_min_km EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 126 sy-vline,
    127 wa_final-min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED color 4        , 139 sy-vline,
    140 wa_final-max_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED color 4        , 152 sy-vline,
    153 wa_final-t_max_min_hr EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED          , 167 sy-vline,
    168 wa_final-fuel_con2 EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED             , 180 sy-vline,
    181 wa_final-km_l EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED            ,193 sy-vline,
    194 wa_final-l_p2 EXPONENT 0 DECIMALS 2 LEFT-JUSTIFIED  color  2        , 206 sy-vline,
    207 wa_final-equnr                                                      ,220 sy-vline.
    endon.
    endloop.
    refresh i_final.
    clear i_final.
    FORM F_GET_MAX_DATA.
    select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
    into  corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne 'X' and
    e~recdu =  'KM'
    AND a~equnr = wa_data-equnr.
    ENDFORM.
    FORM F_GET_MAX_HOURS.
    select single MAX( erecdv ) MIN( erecdv )
    into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne  'X' and
    e~recdu =  'H'
    AND a~equnr = wa_data-equnr  .
    ENDFORM.
    FORM F_GET_MAX_LIT.
    select SUM( e~recdv )
    into corresponding fields of (wa_final-fuel_con2)
    from equi AS a
    inner join eqkt as b
    on bequnr = aequnr
    inner join imptt as c
    on cmpobj = aobjnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne  'X' and
    e~recdu =  'L'
    AND a~equnr = wa_data-equnr.
    ENDFORM.
    FORM prepare_final_rec  USING    p_mode TYPE char1.
    wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
    wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
    if  wa_final-t_max_min_km <> 0 .
    wa_final-km_l =  ( wa_final-max_km - wa_final-min_km )  /  ( wa_final-fuel_con2 ) .
    ELSE.
    wa_final-km_l = 0.
    endif.
    if  wa_final-t_max_min_hr <> 0  .
    wa_final-l_p2 = ( wa_final-fuel_con2 ) / (  wa_final-t_max_min_hr ) .
    ELSE.
    wa_final-l_p2 = 0.
    endif.
      IF p_mode = 'A'.
        wa_final-equnr = wa_data-equnr.
        wa_final-eqktx = wa_data-eqktx.
        wa_final-eqfnr = wa_data-eqfnr.
        wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
        wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
        wa_final-km_l =  ( wa_final-max_km - wa_final-min_km ) /  ( wa_final-fuel_con2 ).
        wa_final-l_p2 = ( wa_final-fuel_con2 ) / (  wa_final-t_max_min_hr ) .
        APPEND wa_final TO i_final  .
      ELSE.
        MODIFY i_final FROM wa_final
          TRANSPORTING
              eqfnr
              max_date_km
              min_date_km
              max_date_lit
              min_date_lit
              max_date_hr
              min_date_hr
              max_km
              min_km
              max_hr
              min_hr
              t_max_min_km
              t_max_min_hr
              fuel_con2
              km_l
              l_p2
              where equnr = wa_data-equnr.
      ENDIF.
    ENDFORM.                    " PREPARE_FINAL_REC

    Hi Guys
    Thanks for your reply, I know how to implement the FM for ALV but little confused where to call , See my correction below it is displaying the result in different way that ie...first displaying Equipment no, name,.correctly but the other values such as km,L,HR all are displaying zero first, when I press back then it is displying the value twice thrise........keep on displaying duplicate records continuesly when back back is press can anyone correct this please
    REPORT  XYZ LINE-SIZE  220 LINE-COUNT 75
             NO STANDARD PAGE HEADING.
    TABLES : equi,
             equz,
             imptt,
             imrg,
             eqkt,
             iloa.
    type-pools: slis.                                 "ALV Declarations
    TYPES:  BEGIN OF ty_data  ,
             equnr      type equnr,         " Euipment no
             eqktx      type eqkt-eqktx,    " Equipment Text
             eqfnr       type iloa-eqfnr,     " Equipment Sort field
             idate      type imrg-idate,    " Measuring Date
             recdu      type imrg-recdu,    " Unit of measuring ='KM','L','H'
             recdv      type imrg-recdv,    " Counter reading data
             cancl       type imrg-cancl,
           END OF ty_data.
    TYPES: BEGIN OF ty_final,
             equnr           type equnr,            "  Equipment no
             eqktx           type eqkt-eqktx,       "  Equipment Text
             eqfnr           type iloa-eqfnr,       "  Equipment Sort field
             idate               type imrg-idate,       "  Measuring Date
             min_date_km     type imrg-idate,       "  Min Date
             min_km          type P DECIMALS 2,       "  Max Km
             max_date_km     type imrg-idate,
             max_km          type P DECIMALS 2,       "  Min km
             t_max_min_km    type P DECIMALS 2,       "  Total min_km-max_km
             min_date_hr     type imrg-idate,       "  Max Date
             min_hr          type P DECIMALS 2,       "  Max hr
             max_date_hr     type imrg-idate,
             max_hr          type P DECIMALS 2,       "  Min hr
             t_max_min_hr    type P DECIMALS 2,                "  Total min_hr-max_hr
             min_date_lit    type imrg-idate,
             min_lit         type P DECIMALS 2,       "  Min lit
             max_date_lit    type imrg-idate,
             max_lit         type P DECIMALS 2,       "  Max lit
             fuel_con        type P DECIMALS 2,       "  Total_hrs / t_max_min_hr
             fuel_con2       type P DECIMALS 2,       "  Total_hrs / t_max_min_hr
             km_l            type P DECIMALS 2,       "  t max_min_km / t_max_min_lit
             l_p             type P DECIMALS 2 ,      "  t_max_min_lit / t_max_min_hr
             l_p2            type P DECIMALS 2 ,
           END OF ty_final.
    *ALV data declarations
    data: fieldcatalog type slis_t_fieldcat_alv with header line,
          gd_tab_group type slis_t_sp_group_alv,
          gd_layout    type slis_layout_alv,
          gd_repid     like sy-repid.
    DATA: i_data TYPE TABLE OF ty_data, " internal table
    wa_data TYPE ty_data, " work area
    i_final TYPE TABLE OF ty_final, " internal table
    wa_final TYPE ty_final. " work area
    SELECTION-SCREEN BEGIN OF BLOCK blk WITH FRAME.
    SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: p_equnr FOR equi-equnr OBLIGATORY, "no-extension no intervals,
                    p_idate FOR imrg-idate.  "NO-EXTENSION NO INTERVALS OBLIGATORY,
                   "p_recdu FOR imrg-recdu." NO-EXTENSION NO INTERVALS ."default 'M3'" OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blk1.
    SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
    SELECTION-SCREEN END OF BLOCK blk2.
    SELECTION-SCREEN END OF BLOCK blk.
    TOP-OF-PAGE.
      FORMAT INTENSIFIED ON.
      WRITE:/55(40) ' WAGNERS INVESTMENT LIMITED  '.
      WRITE:/50(40) ' VEHICLE FUEL CONSUMPTION REPORT ' CENTERED   ,
              2 'Page', sy-pagno.
      FORMAT INTENSIFIED OFF.
      WRITE:/50(40) '----
    ' CENTERED .
      FORMAT INTENSIFIED ON.
      WRITE:/2 sy-datum COLOR 3, sy-uzeit .
      "WRITE:/1 S903-SPMON ."p_yearf.
      ULINE.
      "CENTERED.
    write: /2 'Equipment No :'left-justified,p_equnr-low  color 2 , '  to   '  , p_equnr-high color 2.
    write: /2 'Date From    :', p_idate-low color 2 ,  ' to  '  , p_idate-high color 2.
    END-OF-PAGE.
    START-OF-SELECTION.
    select aequnr deqktx feqfnr eidate erecdu erecdv
    into table i_data
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate and
    e~cancl ne 'X'.
    loop  at i_data into wa_data.
    CLEAR: wa_final.
      READ TABLE i_final into wa_final
               with key equnr = wa_data-equnr." BINARY SEARCH.
        if sy-subrc EQ 0.
          PERFORM F_GET_MAX_DATA.
          PERFORM F_GET_MAX_HOURS.
          PERFORM F_GET_MAX_LIT.
          PERFORM prepare_final_rec USING'M'. " Modify Existing Record
         ElSE.
          PERFORM prepare_final_rec USING'A'. " Append New Record.
          perform build_fieldcatalog.
          perform build_layout.
          perform display_alv_report.
        ENDIF.
       ENDLOOP.
    refresh i_final.
    clear i_final.
    FORM F_GET_MAX_DATA.
    select single MAX( eidate ) Min( eidate ) MAX( erecdv ) MIN( erecdv )
    into   corresponding fields of (wa_final-max_date_km,wa_final-min_date_km,wa_final-max_km ,wa_final-min_km)
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne 'X' and
    e~recdu =  'KM'
    AND a~equnr = wa_data-equnr.
    ENDFORM.
    FORM F_GET_MAX_HOURS.
    select single MAX( erecdv ) MIN( erecdv )
    into corresponding fields of (wa_final-max_hr, wa_final-min_hr)
    from equi AS a
    inner join equz as b
    on aequnr = bequnr
    inner join iloa as f
    on biloan = filoan
    inner join imptt as c
    on aobjnr = cmpobj
    inner join eqkt as d
    on aequnr = dequnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne  'X' and
    e~recdu =  'H'
    AND a~equnr = wa_data-equnr  .
    ENDFORM.
    FORM F_GET_MAX_LIT.
    select SUM( e~recdv )
    into corresponding fields of (wa_final-fuel_con2)
    from equi AS a
    inner join eqkt as b
    on bequnr = aequnr
    inner join imptt as c
    on cmpobj = aobjnr
    inner join imrg as e
    on epoint = cpoint
    where a~equnr in p_equnr
    and
    e~idate in p_idate
    and
    e~cancl ne  'X' and
    e~recdu =  'L'
    AND a~equnr = wa_data-equnr.
    ENDFORM.
    FORM prepare_final_rec  USING    p_mode TYPE char1.
    wa_final-t_max_min_km = wa_final-max_km - wa_final-min_km .
    wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
    if  wa_final-t_max_min_km <> 0 .
    wa_final-km_l =  ( wa_final-max_km - wa_final-min_km )  /  ( wa_final-fuel_con2 ) .
    ELSE.
    wa_final-km_l = 0.
    endif.
    if  wa_final-t_max_min_hr <> 0  .
    wa_final-l_p2 = ( wa_final-fuel_con2 ) / (  wa_final-t_max_min_hr ) .
    ELSE.
    wa_final-l_p2 = 0.
    endif.
      IF p_mode = 'A'.
        wa_final-equnr = wa_data-equnr.
        wa_final-eqktx = wa_data-eqktx.
        wa_final-eqfnr = wa_data-eqfnr.
        wa_final-t_max_min_km = wa_final-min_km - wa_final-max_km .
        wa_final-t_max_min_hr = wa_final-max_hr - wa_final-min_hr.
        wa_final-km_l =  ( wa_final-max_km - wa_final-min_km ) /  ( wa_final-fuel_con2 ).
      gd_repid = sy-repid.
        wa_final-l_p2 = ( wa_final-fuel_con2 ) / (  wa_final-t_max_min_hr ) .
        APPEND wa_final TO i_final  .
      ELSE.
        MODIFY i_final FROM wa_final
          TRANSPORTING
              eqfnr
              max_date_km
              min_date_km
              max_date_lit
              min_date_lit
              max_date_hr
              min_date_hr
              max_km
              min_km
              max_hr
              min_hr
              t_max_min_km
              t_max_min_hr
              fuel_con2
              km_l
              l_p2
              where equnr = wa_data-equnr.
      ENDIF.
    ENDFORM.                    " PREPARE_FINAL_REC
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    form build_fieldcatalog.
                  I.e. Field type may be required in-order for
                       the 'TOTAL' function to work.
      fieldcatalog-fieldname   = 'EQUNR'.
      fieldcatalog-seltext_m   = 'Equip no'.
      fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 0.
      fieldcatalog-outputlen   = 10.
      fieldcatalog-emphasize   = 'X'.
      fieldcatalog-key         = 'X'.
    fieldcatalog-do_sum      = 'X'.
    fieldcatalog-no_zero     = 'X'.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EQKTX'.
      fieldcatalog-seltext_m   = 'Description'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 1.
    append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'EQFNR'.
      fieldcatalog-seltext_m   = 'Sortfield'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 2.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MIN_DATE_KM'.
      fieldcatalog-seltext_m   = 'Min Date'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 3.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MAX_DATE_KM'.
      fieldcatalog-seltext_m   = 'Max Date'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 4.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MIN_KM' .
      fieldcatalog-seltext_m   = 'Min KM'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 5.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MAX_KM' .
      fieldcatalog-seltext_m   = 'Max KM'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 6.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'T_MAX_MIN_KM' .
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-seltext_m   = 'Total KM'.
      fieldcatalog-col_pos     = 7.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    fieldcatalog-fieldname   = 'MIN_HR' .
      fieldcatalog-seltext_m   = 'Min Hr'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 8.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'MAX_HR' .
      fieldcatalog-seltext_m   = 'Max Hr'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 9.
    append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'T_MAX_MIN_HR' .
      fieldcatalog-seltext_m   = 'Total HR'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 10.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'FUEL_CON2' .
      fieldcatalog-seltext_m   = 'Km/L'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 11.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
      fieldcatalog-fieldname   = 'L_P2' .
      fieldcatalog-seltext_m   = 'Lit/HR'.
        fieldcatalog-tabname     =  'i_final'.
      fieldcatalog-col_pos     = 12.
      append fieldcatalog to fieldcatalog.
      clear  fieldcatalog.
    endform.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    form build_layout.
      gd_layout-no_input          = 'X'.
      gd_layout-colwidth_optimize = 'X'.
      gd_layout-totals_text       = 'Totals'(201).
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.
    endform.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    form display_alv_report.
      gd_repid = sy-repid.
      call function 'REUSE_ALV_GRID_DISPLAY'
           exporting
                i_callback_program      = gd_repid
               i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
               i_callback_user_command = 'USER_COMMAND'
               i_grid_title           = outtext
                is_layout               = gd_layout
                it_fieldcat             = fieldcatalog[]
               it_special_groups       = gd_tabgroup
               IT_EVENTS                = GT_XEVENTS
                i_save                  = 'X'
               is_variant              = z_template
           tables
                t_outtab                = i_final
                exceptions
                program_error           = 1
                others                  = 2.
      if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      endif.
    endform.                    " DISPLAY_ALV_REPORT

  • IllegalArgumentException error while exporting report in PDF format

    Hi all,
    we are using Crystal Report 2008, Java 1.5.22 and JRC 11.8.4.1094 to export reports in pdf format within java.
    It is working fine for all reports except for a specific report where it gives IllegalArgumentException while exporting the PDF.
    Below the error occurred:
    12:39:16,875 ERROR [c] Disk Exporter: no output file was created by an exporter
    12:39:16,875 ERROR <b> PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting export
    java.lang.IllegalArgumentException
         at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
         at com.crystaldecisions.reports.a.e.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
         at com.crystaldecisions.report.web.event.br.a(Unknown Source)
         at com.crystaldecisions.report.web.event.w.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
    12:39:16,875 INFO  [c] Disk Exporter: finalizing export to destination
    12:39:16,875 ERROR [JRCCommunicationAdapter] Failed to export report
    com.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unknown exception is thrown
         at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)
         at com.crystaldecisions.reports.a.e.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)
         at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)
         at com.businessobjects.reports.sdk.b.b.int(Unknown Source)
         at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)
         at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)
         at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)
         at com.crystaldecisions.report.web.event.br.a(Unknown Source)
         at com.crystaldecisions.report.web.event.w.a(Unknown Source)
         at com.crystaldecisions.report.web.event.b7.broadcast(Unknown Source)
         at com.crystaldecisions.report.web.event.av.a(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.do(Unknown Source)
         at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.a(Unknown Source)
         at com.crystaldecisions.report.web.viewer.ReportExportControl.a(Unknown Source)
         at com.crystaldecisions.report.web.ServerControl.getHtmlContent(Unknown Source)
    Caused by: java.lang.IllegalArgumentException
         at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)
         ... 56 more
    Have an idea?
    Thanks

    Hello Andrea.
    I searched through the SAP Notes for the error that you are encountering.  There is an SAP Note that exists titled the following:
    1332907 - Report being exported to PDF format using the Crystal Reports for Eclipse 1.x runtime, errors with the exception: PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob
    Since you may not have access to the SAP Notes, I will extract the details that are mentioned in the note here:
    =============================================
    Symptom
    Attempting to export a report to Adobe PDF format using the Crystal Reports for Eclipse 1.x runtime results in an exception.
    The exception indicates "PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob"
    Environment
    Windows 2003
    Apache Tomcat 5.0
    Crystal Reports for Eclipse version 1.x
    Reproducing the Issue
    Using the Crystal Reports for Eclipse runtime version 1.x attempt to export a report to PDF format that has the "Repeat Group Header on Each Page" option enabled.
    Note: This does not occur if this option is enabled in a subreport.
    Cause
    When the "Repeat Group Header on Each Page" is enabled for a group in a main report the Crystal Reports for Eclipse 1.x runtime is unable to correclty format the PDF document which results in an exception.
    Resolution
    Updating the application to use Crystal Reports for Eclipse version 2.x runtime will resolve the issue.
    The most recent updates to the Crystal Reports for Eclipse runtime can be freely downloaded from the SAP SDN Website. 
    http://www.sdn.sap.com/irj/boc/crystalreports-java
    =============================================
    Since you are on JRC 11.8.4.1094 which is Crystal Reports for Eclipse 1.x, this may be the cause of your problem.
    I hope that this helps.
    Regards.
    - Robert

  • Unable to save webi report in excel format

    Hi All,
    I have a question. I recently upgrsded my internet explorer from IE 7 to IE 8.
    Previously, i was able to save webi reports in excel format without any issues.Even after upgrading to IE version8, i was able to save webi reoprts to excel without any issues for 2 weeks.
    Suddenly I am unable to save Webi reports in excel format now.When I select the Save to my computer as Excel option the saving dialog box appears and hangs forever.
    Can someone please advise me on this??
    Please hel as it is very urgent.

    Hi All,
    Trying to replicate WEBI Excel Download issue.
    Operating system : Windows 7
    Internet Explorer : IE8 Version 8.0.7600.16385CO.
    Jre Version : 1.6_ greater than 1.8 version.
    If anybody having above specifications in your machines Please try to save a webi reports to excel format and send me the results.

Maybe you are looking for

  • BW ERROR while calculating local formula in Bex analyzer

    Hi gurus, Their is an error comming up on a report which is  opened in Bex Analyzer. When we create local formula i encounter this error. It says" "Program error in class SAPMYSS1S method :uncaught exception " "System error in program SAPLRRK0 and fo

  • What is the best way to mimic the data from production to other server?

    Hi, here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication?

  • Printing from InDesign and Photoshop - colors don't match

    I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.

  • How to change iMovie Project from iSight to DV-NTSC?

    I noticed my iMovie project says it's an iSight project, meaning everything will be converted to motion-JPEG's on export in full quality. But my project has both DV and MJPEG clips and I prefer to export my DV clips untouched, not converted to MJPEG.

  • What can be done to minimize redeploy times during incremental development?

    If you are in the incremental development phase of the project, you can try and deploy to the Domain Administration Server (DAS), which is denoted by the standalone instance named "server". The DAS is a fully functional J2EE instance and is used as t