Reports not performing well

Hi all,
I used to have a RPD & Webcat in windows server 2008 environment. Reports used to perform well and retrive data fast. Recently it was moved to linux machine. The perfomance was badly degraded. Reports not retrieving fast. They are dead slow.
Linux Machine has 8GB RAM, and Windows has 16GB RAM. Can it be one of the reasons?
Where all areas I can check to let the linux machine perform well?

Hi, thank you so much for the reply.
Could you please tell me how can I increase the Heap Memory size?
And also one more question is that, when want to look at the query that is getting generated from Manage Sessions it is telling No Log Found. Could you please tell me why is this happening?

Similar Messages

Dell Studio 17 Graphic Card is not performing well, Can I update the driver

I just purchased Dell Studio s17-169B. The graphic card in this laptop is Intel Graphics Media Accelerator 4500MHD. However, when I check graphic driver through device manager, I have found that driver is for Mobile Intel 4 series express chipset family with version 7.15.10.1576. My question is: can I download Dell Studio 1737 Intel Mobile Graphics Media Accelerator 4500MHD Driver A03 to update my current gtaphic driver so that the graphic display can be improved? Otherwise, I may return this laptop back to Bestbuy. Thanks for your input.

Define "not performing well"...
If you're playing 3D games, you will find that the 4500MHD is going to be lacking in general regardless of the driver installed. Any Intel GMA series integrated graphics solution is going to be at the bottom of the barrel in terms of 3D performance. In most cases, the only thing worse than a GMA series accelerator is an older GMA series accelerator.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

I purchased iphone 4s 32 gb in oct 2014 still battery not performing well

i purchase iphone 4s 32gb in oct 2014 but still battery not performing well,i stop already all app n also wifi off,brightness down,vibration mode off but i am still failure

Where have you tried to get help?
basics from the manual are restart, reset, restore.
If that fails, then make an appointment at the genius bar.

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
http://support.apple.com/kb/HT1365
For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

How do I get refund for App not performing well? Report problem link takes me to these discussion boards

I downloaded this App for ringtones (Ringtones 500.000) , purchased a full version of it, so I should be able to download unlimited number of ringtones. The problem is, it won't let me download any ringtones after 10, which is how free version of this App performs.
I have contacted developers, but they keep sending the instruction book to me with step-by-step inforamtion, which is out of date itself, but that is not a problem, I think in my case.
When I try to report a problem to Apple , using hte link on my receipt, it just takes me to a page with discussion boards and FAQ.
I would like to get $1.99 back instead of troubleshoot this any longer, because it seems App help support people are not understanding the problem.
I did try re-loading the App -didn't help either.
Thank you!

Welcome to the Apple Community.
Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
Currently, if your purchase happens to be your most recent purchase you will not be redirected to the report form, in this case use the report a problem option from the invoice that was emailed to you.

Kernel regression : iwl-legacy/4965 not performing well with 4965AGN.

Hey guys I just updated the kernel26 package via pacman not too long ago and noticed after upgrade I had worse than usual wireless performance.
I upgraded from 2.6.38-ARCH to 2.6.39-ARCH.
Heres an output of iwconfig :
wlan0 IEEE 802.11abgn ESSID:"MySSID"
Mode:Managed Frequency:2.412 GHz Access Point: MyMac
Bit Rate=24 Mb/s Tx-Power=14 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=55/70 Signal level=-55 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:5 Invalid misc:33419 Missed beacon:0
I notice that there is a large Invalid misc value and the connection even had a couple of Tx excessive retry errors, I also notice that my wireless bandwidth is quite weak (I had a G rate of 54 Mb/s pre upgrade). I used speedtest.net to check my internet speed and noted that my connection speed had halved (7 mbit as opposed to 15).
Oh and if this helps here is an output of dmesg |grep 4965 :
[ 5.842556] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 5.842578] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 5.842580] Registering 4965 rate control operations
[ 5.842643] iwl4965 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.842651] iwl4965 0000:03:00.0: setting latency timer to 64
[ 5.842678] iwl4965 0000:03:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 5.915174] iwl4965 0000:03:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 5.915192] iwl4965 0000:03:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 5.915451] iwl4965 0000:03:00.0: irq 48 for MSI/MSI-X
[ 6.017997] iwl4965 0000:03:00.0: loaded firmware version 228.61.2.24
[ 6.401528] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
and an output of lspci | grep 4965 :
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
I connect to my network with WPA2(AES) encryption and I'm using NetworkManager for my networking management.
If theres any other info that I should share to help solve this problem please let me know.
(P.S. I'm a new convert to Arch and I've been finding it great!)
-MDstr
Last edited by MDstr (2011-06-13 13:43:24)

djpohly wrote:qelo: what kind of card do you have? Maybe we have a different problem from the OP...?
I have 4965AGN. I can use wifi if I have very good link quality but even then I have many "Tx excessive retries" and "Invalid misc".
$ uname -r
3.0.0-rc3-mainline
wlan0 IEEE 802.11abgn ESSID:"x"
Mode:Managed Frequency:2.427 GHz Access Point: xx:xx:xx:xx:xx:xx
Bit Rate=13 Mb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=37/70 Signal level=-73 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:12688 Invalid misc:27437 Missed beacon:0
[ 13.522300] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 13.522369] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 13.522503] iwl4965 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.522603] iwl4965 0000:04:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 13.561536] iwl4965 0000:04:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 13.561613] iwl4965 0000:04:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 13.989978] iwl4965 0000:04:00.0: loaded firmware version 228.61.2.24
[ 151.653373] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[ 155.353370] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[ 276.389009] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 1
[ 1190.419959] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 6
[14916.337475] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 0
[17726.030890] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 0
[21043.402115] iwl4965 0000:04:00.0: Aggregation not enabled for tid 6 because load = 1
[22137.197869] iwl4965 0000:04:00.0: iwl4965_tx_agg_start on ra = xx:xx:xx:xx:xx:xx tid = 6

ATI Radeon 9600 graphics card not performing well-fix or upgrade?

In my PPC Dual G5 I have the ATI Radeon 9600 XT. In trying to use Keynote's QuickTime export I encountered severe lag problems. part of this is how Keynote handles the QT export, and part is due to the Radeon (I've been through lots of technical troubleshooting on the Keynote Apple forum on this.) The current recommendation is to use Snapz Pro to do a screencast of the presentation. I ran into out-of-sync issues with this file, and sent a test off to Ambrosia (makes of Snapz Pro). He reported that it was my video card, and that it output fine on a current MB Pro.
I have checked the ATI/AMD website and called their TS. They consider the G5 installed card to be OEM, and there is no driver update for it. There isn't one on the Apple site either. Is there an easy SW test to see if the Radeon has had some sort of performance degradation issue? The Ambrosia tech said I should be getting better performance with it.
Any insight to this? If I do have to upgrade the card, what is the best current match for the G5?

In my PPC Dual G5 I have the ATI Radeon 9600 XT. In trying to use Keynote's QuickTime export I encountered severe lag problems. part of this is how Keynote handles the QT export, and part is due to the Radeon (I've been through lots of technical troubleshooting on the Keynote Apple forum on this.) The current recommendation is to use Snapz Pro to do a screencast of the presentation. I ran into out-of-sync issues with this file, and sent a test off to Ambrosia (makes of Snapz Pro). He reported that it was my video card, and that it output fine on a current MB Pro.
I have checked the ATI/AMD website and called their TS. They consider the G5 installed card to be OEM, and there is no driver update for it. There isn't one on the Apple site either. Is there an easy SW test to see if the Radeon has had some sort of performance degradation issue? The Ambrosia tech said I should be getting better performance with it.
Any insight to this? If I do have to upgrade the card, what is the best current match for the G5?

GTX 770 in Premiere Pro 5.5 not performing well.

I bought a GTX 770 to improve the mercury playback performance in Premiere Pro 5.5. So far I see no improvements at all over my previouse 9600 GT card. Am I wasting my money and should I send it back, or are there some settings that I´m missing? I have added the GTX 770 to the cuda supported card list and switched on mercury playback in Premiere. I have also checked that cuda is enabled for Premiere Pro in the Nvidia control panel.

cinemaor wrote:
I have this setup:
CPU: i7 920, 2.67GHz
Ram: 12Gb
HD: SSD
I guess, from what I can read of the table I belong in the GTX 650 segment, so I´m not that much of. Anyway after reading the link John posted it cleared up a couple things for me. CUDA only accelerate some effects while I thought it would enhance everything. I tried putting Magic lantern 5D3 raw footage in the timeline and was hoping it would play smoothly. I was also hoping the dynamic link from after effects would perform better with nativ 5D3 HD material.
The slow CPU (unless heavily overclocked) and the low amount of RAM are your two bottlenecks. In addition, the version of Magic lantern you used might not support GPU acceleration in Premiere Pro CS5.5 (if it doesn't, then the renders will be entirely in software-only mode).

Muse Site not performing well on Apple devices

Dear Muse enthousiasts,
I recently made my first site for a customer in Muse: http://www.mentinkhairstyle.nl
Everything seems to work ok on most devices, except for apple stuff. I got several reports of issues on iphones and ipads. Android and Windows show the site correctly.
The most prominent issues I bump into are bad scrolling and problems with the typekit font which is used on the site.
The effects I used in the site are motion scroll and opacity.
Any suggestions that lead to solving the problems are welcome! If you need me to provide any related files, please ask me!
Thank you all in advance!
Tamás

Hi Tamas
I checked your site in iPhone, iPad,Google Nexus and Android phone.
The scroll with text works fine as the opacity changes with scroll of page.
Please provide more details as if any specific browser or device is used.
Also if you can upload screenshots , then it would be help.
Thanks,
Sanjit

Battery is not performing well

my battery life is not 8 hours its life span is less than so how can i get more life spanned battery

Yes, It's a fairly simple replacement.
http://www.ifixit.com/Device/MacBook_Air

Query not performing well

Hi,
We are trying to load data from R/3 46c to BW31. This load takes no more than 2 hours max generally. At times we have noticed that it takes exceptionally more time like 10-12 hours . .
On checking I found that it generally gets stuck like in COVP . .though it keeps on reading thru this . . but is takes lot of time . program which it uses is SAPLBWOMR
and the query is given below. How to tackle this . .we tried identifying where there is some contention because of which this is happening . but no luck . .All the indexes for the tables behing this view are standard ones . .
SELECT
"BEKNZ" , "BELNR" , "BELTP" , "BLDAT" , "BUDAT" , "BUKRS" , "BUZEI" ,
"FKBER" , "GJAHR" , "GKOAR" , "GKONT" , "GSBER" , "KOKRS" , "KSTAR" ,
"KWAER" , "MATNR" , "MEFBTR" , "MEGBTR" , "MEINH" , "OBJNR" , "OBJNR_N1" ,
"OWAER" , "PAROB1" , "PBUKRS" , "PERIO" , "PERNR" , "PFKBER" , "QMNUM" ,
"SGTXT" , "TWAER" , "VERSN" , "VRGNG" , "WERKS" , "WKFBTR" , "WKGBTR" ,
"WOGBTR" , "WRTTP" , "WTGBTR"
FROM
"COVP"
WHERE
"LEDNR" = :A0 AND "OBJNR" BETWEEN :A1 AND :A2 AND "WRTTP" IN ( :A3 , :A4 ,
:A5 ) AND "TIMESTMP" BETWEEN :A6 AND :A7 AND "MANDT" = :A8#

Hi Vijay
Contact with your basis team and try to find out the stastics of the table which your using ..
1)Ask them to run Compute build stastics on this table
2) Check the distinct values for the columns.
your basis team will be having the idea about the above mentioned things ..check with them..
bye
Shu Moh.

My E5 not performing well

Dear
I have purchased E5 mobile last 5months back, i have enfough memory in Phone morethan 3MB but the its asking delet some data from phone memory b'coz memory low
pls advise me how how to addrees
santhosh

Please see these threads for suggestions:
/t5/Eseries-and-Communicators/e5-Memory-Full/td-p/780338
/t5/Eseries-and-Communicators/Nokia-E72-log-file-on-phone-memory-increasing/td-p/615813
The fix isn't necessarily straightforward, but hopefully the above will help.

Time Machine reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

After months of working OK Time Machine is reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

asknrobson wrote:
Wierd!
I followed #C3 and loaded Time Machine Buddy, which was defnitely helpful, then deleted the file that the backup failed at, but after 3 more attempts I stopped deleting or excluding files as this wasn't improving the situation.
The recommendation is to exclude those files from being backed-up, not to delete them!
Updating boot support partitions for the volume as required:
Yes, that's a bit misleading. It just means that will be done, if it's required, which it isn't on your backups.
I have no idea if anything actually was changed however just when I had given up and walked away, TM has started working after a week of failing.
It probably did find and fix something. Just for reference, Disk Utiltiy usually shows the progress and repair messages in the center part of the window, but often doesn't when repairing a sparse bundle on a network. You can see the messages at any time by clicking the Log icon in the toolbar, or select Window > Show Log from the menubar.
Anyway, glad it's sorted out!

How should I report forum performance issues?

The forums rely heavily on the caching features of browsers to improve the speed of page rendering. Performance of these forums should greatly improve after a few pages because more and more of the images, css and javascript is cached in the browser. As a consequence, when reporting forums performance issues the report should include some information on the state of the browser cache to determine whether the issue is a browser issue or a server issue. Such detailed information is generally not available from just watching the browser screen, but needs to come from specialized tools such as performance monitor plugins and recording proxies.
The preferred report method for performance issues is to use the speed reporting features build into or available as a plugin for a browser for both the page you want to report a problem with and several refence pages in the site. Detailed instructions are listed below separated out for different browsers. If possible, please use Firefox for submitting the report because it provides an export format that can be read back electronically.
Known performance issues
The performance issues with any screen with a Rich Text Editor, such as the Reply window and the compose Private Message window have been acknowleged and improvements are being implemented.
Mozilla Firefox (preferred)
Warning: it is currently not recommended to generate a speed report when logged in. The speed report has enough detail for somebody else to hijack your session and impersonate you on the forums. If you really must report while logged in, make sure you log out your browser after generating the speed report and wait at least 4 hours before posting.
Install the Firebug plugin
Install the NetExport 0.6 extension for Firebug
Enable all Firebug panels
Switch to the "Net" panel in Firebug
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Click on this link
Export the data from the Firebug Net panel
Browse to the page where you are experiencing the performance problem.
Export the data from the Firebug Net panel
When you report a performance problem please attach the 6 exports from the Firebug Net panel and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting. If you have non-standard tweaks to your Firefox configuration (such as pipelining enabled) or are running any plugins please include that information in your report as well.
Google Chrome
Open the Developer Tools (Ctrl-Shift-J)
Navigate to the resources tab
Enable resource tracking.
Click on this link
Export the resource loading data.
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Click on this link
Export the data
Reset the data by disabling and enabling resource tracking
Navigate to the page where you experience the performance problem
Export the data
Since Google Chrome does not have an export format for the Resource Tracking information best current practice is to take a screenshot and note the hover details for any resource with a tail that is longer then 25% of the total load time. When you report a performance problem please attach the screenshots and an explanation of how you are experiencing the issues (for instance how much slower it is then normal) and include a description of your internet connection (dial-up, dsl, cable etc.) and the country from where you are connecting.
Apple Safari
The Apple Safari Web Inspector has a Resources panel similar to the Resources panel in the Google Chrome developer tools.To get there, follow these steps:
Show the menu bar.
Go to preferences
Go to the Advanced Tab
Check “Show Develop menu in menu bar”.
From the Develop menu select “Show Web Inspector”.
Collecting the performance information and exporting works exactly the same as in Google Chrome. Please refer to the instructions for Google Chrome.
Microsoft Internet Explorer
IE does not have native features to analyze web traffic. No plugins have been found that produce the required information (please let us know if we missed any). For now, please reproduce the issue with Firefox, Chrome or Safari.
Please note that due to the reliance on Javascript for the interactive effects the performance of these forums will be much better on MS IE 8 then on previous versions of MS IE.

Hi
It works, check once again...
regards
Swami

ORA-01456 : may not perform insert/delete/update operation

When I use following stored procedure with crystal reports, following error occurs.
ORA-01456 : may not perform insert/delete/update operation inside a READ ONLY transaction
Kindly help me on this, please.
My stored procedure is as under:-
create or replace
PROCEDURE PROC_FIFO
(CV IN OUT TB_DATA.CV_TYPE,FDATE1 DATE, FDATE2 DATE,
MSHOLD_CODE IN NUMBER,SHARE_ACCNO IN VARCHAR)
IS
--DECLARE VARIABLES
V_QTY NUMBER(10):=0;
V_RATE NUMBER(10,2):=0;
V_AMOUNT NUMBER(12,2):=0;
V_DATE DATE:=NULL;
--DECLARE CURSORS
CURSOR P1 IS
SELECT *
FROM FIFO
WHERE SHARE_TYPE IN ('P','B','R')
ORDER BY VOUCHER_DATE,
CASE WHEN SHARE_TYPE='P' THEN 1
ELSE
CASE WHEN SHARE_TYPE='R' THEN 2
ELSE
CASE WHEN SHARE_TYPE='B' THEN 3
END
END
END,
TRANS_NO;
RECP P1%ROWTYPE;
CURSOR S1 IS
SELECT * FROM FIFO
WHERE SHARE_TYPE='S'
AND TRANS_COST IS NULL
ORDER BY VOUCHER_DATE,TRANS_NO;
RECS S1%ROWTYPE;
--BEGIN QUERIES
BEGIN
DELETE FROM FIFO;
--OPENING BALANCES
INSERT INTO FIFO
VOUCHER_NO,VOUCHER_TYPE,VOUCHER_DATE,TRANS_QTY,TRANS_AMT,TRANS_RATE,
SHOLD_CODE,SHARE_TYPE,ACC_NO,SHARE_CODE,TRANS_NO)
SELECT TO_CHAR(FDATE1,'YYYYMM')||'001' VOUCHER_NO,'OP' VOUCHER_TYPE,
FDATE1-1 VOUCHER_DATE,
SUM(
CASE WHEN
--((SHARE_TYPE ='S' AND DTAG='Y')
SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
) TRANS_QTY,
SUM(TRANS_AMT),
NVL(CASE WHEN SUM(TRANS_AMT)<>0
AND
SUM
CASE WHEN SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
)<>0 THEN
SUM(TRANS_AMT)/
SUM
CASE WHEN SHARE_TYPE IN ('P','B','R','S') THEN
TRANS_QTY
ELSE
0
END
) END,0) TRANS_RATE,
MSHOLD_CODE SHOLD_CODE,'P' SHARE_TYPE,SHARE_ACCNO ACC_NO,
SHARE_CODE,0 TRANS_NO
FROM TRANS
WHERE ACC_NO=SHARE_ACCNO
AND SHOLD_CODE= MSHOLD_CODE
AND VOUCHER_DATE<FDATE1
--AND
--(SHARE_TYPE='S' AND DTAG='Y')
--OR SHARE_TYPE IN ('P','R','B'))
group by TO_CHAR(FDATE1,'YYYYMM')||'001', MSHOLD_CODE,SHARE_ACCNO, SHARE_CODE;
COMMIT;
--TRANSACTIONS BETWEEND DATES
INSERT INTO FIFO
TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE
SELECT TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
CASE WHEN SHARE_TYPE='S' THEN
NVL(TRANS_RATE-COMM_PER_SHARE,0)
ELSE
NVL(TRANS_RATE+COMM_PER_SHARE,0)
END
,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,NULL TRANS_COST,SHARE_TYPE
FROM TRANS
WHERE ACC_NO=SHARE_ACCNO
AND SHOLD_CODE= MSHOLD_CODE
AND VOUCHER_DATE BETWEEN FDATE1 AND FDATE2
AND
((SHARE_TYPE='S' AND DTAG='Y')
OR SHARE_TYPE IN ('P','R','B'));
COMMIT;
--PURCHASE CURSOR
IF P1%ISOPEN THEN
CLOSE P1;
END IF;
OPEN P1;
LOOP
FETCH P1 INTO RECP;
V_QTY:=RECP.TRANS_QTY;
V_RATE:=RECP.TRANS_RATE;
V_DATE:=RECP.VOUCHER_DATE;
dbms_output.put_line('V_RATE OPENING:'||V_RATE);
dbms_output.put_line('OP.QTY2:'||V_QTY);
EXIT WHEN P1%NOTFOUND;
--SALES CURSOR
IF S1%ISOPEN THEN
CLOSE S1;
END IF;
OPEN S1;
LOOP
FETCH S1 INTO RECS;
EXIT WHEN S1%NOTFOUND;
dbms_output.put_line('OP.QTY:'||V_QTY);
dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
IF ABS(RECS.TRANS_QTY)<=V_QTY
AND V_QTY<>0
AND RECS.TRANS_COST IS NULL THEN
--IF RECS.TRANS_COST IS NULL THEN
--dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
--dbms_output.put_line('BAL1:'||V_QTY);
UPDATE FIFO
SET TRANS_COST=V_RATE,
PUR_DATE=V_DATE
WHERE TRANS_NO=RECS.TRANS_NO
AND TRANS_COST IS NULL;
COMMIT;
dbms_output.put_line('UPDATE TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('OP.QTY:'||V_QTY);
dbms_output.put_line('SOLD:'||RECS.TRANS_QTY);
dbms_output.put_line('TRANS_NO:'||RECS.TRANS_NO);
dbms_output.put_line('BAL2:'||TO_CHAR(RECS.TRANS_QTY+V_QTY));
END IF;
IF ABS(RECS.TRANS_QTY)>ABS(V_QTY)
AND V_QTY<>0 AND RECS.TRANS_COST IS NULL THEN
UPDATE FIFO
SET
TRANS_QTY=-V_QTY,
TRANS_COST=V_RATE,
TRANS_AMT=ROUND(V_QTY*V_RATE,2),
PUR_DATE=V_DATE
WHERE TRANS_NO=RECS.TRANS_NO;
--AND TRANS_COST IS NULL;
COMMIT;
dbms_output.put_line('UPDATING 100000:'||TO_CHAR(V_QTY));
dbms_output.put_line('UPDATING 100000 TRANS_NO:'||TO_CHAR(RECS.TRANS_NO));
INSERT INTO FIFO
TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,SHARE_CODE,ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE,PUR_DATE
VALUES
MCL.NEXTVAL,RECS.VOUCHER_NO,RECS.VOUCHER_TYPE,
RECS.VOUCHER_DATE,RECS.TRANS_QTY+V_QTY,
RECS.TRANS_RATE,(RECS.TRANS_QTY+V_QTY)*RECS.TRANS_RATE,RECS.SHOLD_CODE,
RECS.SHARE_CODE,RECS.ACC_NO,
RECS.DTAG,NULL,'S',V_DATE
dbms_output.put_line('INSERTED RECS.QTY:'||TO_CHAR(RECS.TRANS_QTY));
dbms_output.put_line('INSERTED QTY:'||TO_CHAR(RECS.TRANS_QTY+V_QTY));
dbms_output.put_line('INSERTED V_QTY:'||TO_CHAR(V_QTY));
dbms_output.put_line('INSERTED RATE:'||TO_CHAR(V_RATE));
COMMIT;
V_QTY:=0;
V_RATE:=0;
EXIT;
END IF;
IF V_QTY>0 THEN
V_QTY:=V_QTY+RECS.TRANS_QTY;
ELSE
V_QTY:=0;
V_RATE:=0;
EXIT;
END IF;
--dbms_output.put_line('BAL3:'||V_QTY);
END LOOP;
V_QTY:=0;
V_RATE:=0;
END LOOP;
CLOSE S1;
CLOSE P1;
OPEN CV FOR
SELECT TRANS_NO,VOUCHER_NO,VOUCHER_TYPE,
VOUCHER_DATE,TRANS_QTY,
TRANS_RATE,TRANS_AMT,SHOLD_CODE,B.SHARE_CODE,B.ACC_NO,
DTAG,TRANS_COST,SHARE_TYPE, B.SHARE_NAME,A.PUR_DATE
FROM FIFO A, SHARES B
WHERE A.SHARE_CODE=B.SHARE_CODE
--AND A.SHARE_TYPE IS NOT NULL
ORDER BY VOUCHER_DATE,SHARE_TYPE,TRANS_NO;
END PROC_FIFO;
Thanks and Regards,
Luqman

Copy from TODOEXPERTOS.COM
Problem Description
When running a RAM build you get the following error as seen in the RAM build
log file:
14:52:50 2> Updating warehouse tables with build information...
Process Terminated In Error:
[Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction
(SIGENG02) ([Oracle][ODBC][Ora]ORA-01456: may not perform insert/delete/update operation inside a READ ONLY transaction
) Please contact the administrator of your Oracle Express Server application.
Solution Description
Here are the following suggestions to try out:
1. You may want to use oci instead of odbc for your RAM build, provided you
are running an Oracle database. This is setup through the RAA (relational access
administrator) maintenance procedure.
Also make sure your tnsnames.ora file is setup correctly in either net80/admin
or network/admin directory, to point to the correct instance of Oracle.
2. Commit or rollback the current transaction, then retry running your
RAM build. Seems like one or more of your lookup or fact tables have a
read-only lock on them. This occurs if you modify or add some records to your
lookup or fact tables but forget to issue a commit or rollback. You need to do
this through SQL+.
3. You may need to check what permissions has been given to the relational user.
The error could be a permissions issue.
You must give 'connect' permission or roll to the RAM/relational user. You may
also try giving 'dba' and 'resource' priviliges/roll to this user as a test. Inorder to
keep it simple, make sure all your lookup, fact and wh_ tables are created on
a single new tablespace. Create a new user with the above privileges as the
owner of the tablespace, as well as the owner of the lookup, fact and wh_
tables, inorder to see if this is a permissions issue.
In this particular case, the problem was resolved by using oci instead of odbc,
as explained in suggestion# 1.

Reports not performing well

Similar Messages

Maybe you are looking for