Reports not showing.
Hi guys
Just wondering if i coudl get a bit of help please. We can not seem to get any reports from Crystal reports. Below is the process that is followed.
From 4Series Parties go into party you need the valuation for. Then choose:
u2022 Portfolio Database (clipboard)
o Reports
o Demand Valuation
o Ensure the correct date is showing
o Heading = Name & Code
o Sort Summary = Security type
o Create
o Yes
o Cancel
o Click on Crystal.
From 4Series Parties go into:
u2022 Product Application (parrot)
o Individual Valuation u2013 Alpha
o Log into Crystal Reports using Hotbed details
o Name = use dropdown menus to pick party as above
o Date = the report generated above should be on the dropdown menu
o Print
At this point there should be a log in prompt but instead you go directly to the u2018enter values screenu2019. There is a dropdown list but this only goes alphabetically to J.
How can i get the whole list to show up.
If this does not make any sense please do let me know and i can furthe explain what we are trying to do
Not sure what this product is?
This forum is only for Crystal Reports Design database connection issues.
In your product you should click on Help and look for a support link.
Thank you
Don
Similar Messages
-
ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin UsuwanthimIt used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?
-
Report not show after submit query in parameter form
Hi, anubody can help me with this
report not show after click submit query button in parameter formTo help you see what is happening, temporarily add DESNAME to your parameter screen. Make sure that DESNAME on the parameter screen has a value before you click the Submit Query button.
If you are running the report with a local report service (running on your workstation), the value of desname should be the name of your default printer.
If you are running the report on a network application server based report service you need to specify the name of a printer that is accessible to the server on which the report service is running. Make sure that it is specified in a way that the server can recognize it, e.g. \\printserver_01\HPLaserJ4210.
Maybe this will help some.
James K. -
S_ALR_87013543 report not showing line item correctly
Hi all,
The S_ALR_87013543 report or any other cost plan report not showing the line item report correctly.
eg When the S_ALR_87013543 report executed it showing 100 as a plan value against one of cost element when we double click and go to line item report it showing only one entry of 50 which is wrong.
when i checked the COSP table for the wbse with that cost element it has two entries with value type 1 and 29. value type 29 says value from sales order and 1 as plan .
My query is why S_ALR_87013543 report not showing the correct value or shall it not pick the value from value type 29.
regards
ShivHi Preeti,
Thanks for the updates but one more issue. In one case COSP has a one entry for value type=1 with Busniess transaction SDOR but it was not shown in line item report. it says " no line item were selected". inspite of entry in COSP.
Screenshot of report attached,.
when i checked the drill down report for line item it says no line item found.
Any idea what went wrong
Regards
shiv -
Crystal reports not show in my browser
i am using vs 2013 sap sp9 reports show in tools crystal reports but i am run in browser reports not show in browser
Hi,
I am afraid that this issue is related to third-party, and it is not supported in these forums.
Crystal Reports are supported on
http://scn.sap.com/community/crystal-reports.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi!
I am unable to get the result for my one of the item as checkbox. Other two are working properly .Please check and let me know wheres the problem please.
***INCLUDE ZSD_CONTRACT_LIST_T01_RENTAL1 .
TABLES: vbak, vbap, wbrk, zsdsched,vbkd, fplt, fpla, tvlvt.
TYPE-POOLS: slis.
data: BEGIN OF gt_report occurs 0,
vbeln LIKE vbak-vbeln, "Sales Document
posnr LIKE vbap-posnr, "Item
ernam LIKE vbak-ernam, "Created by
erdat LIKE vbak-erdat, "Created on
audat LIKE vbak-audat, "Document Date
vbtyp LIKE vbak-vbtyp, "SD document category
auart LIKE vbak-auart, "Sales Document type
vkorg LIKE vbak-vkorg, "Sales Org
vtweg LIKE vbak-vtweg, "Distribution Channel
spart LIKE vbak-spart, "Division
vkbur LIKE vbak-vkbur, "Sales Office
guebg LIKE vbak-guebg, "Valid from date
gueen LIKE vbak-gueen, "Valid to date kunnrt LIKE kna1-name1, "Sold-to Name
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
kunnr LIKE vbak-kunnr, "Sold-to party
kunnrt LIKE kna1-name1, "Sold-to Name
kvgr4 LIKE vbak-kvgr4, "Territory
matnr LIKE vbap-matnr, "Material
arktx LIKE vbap-arktx, "Material Short Text
charg LIKE vbap-charg, "Batch
matkl LIKE vbap-matkl, "Material Group
pstyv LIKE vbap-pstyv, "Item Category
zmeng LIKE vbap-zmeng, "Target Quantity
zieme LIKE vbap-zieme, "Target Unit
kdmat LIKE vbap-kdmat, "Customer Material Number
werks LIKE vbap-werks, "Plant
lgort LIKE vbap-lgort, "Storage Location
vstel LIKE vbap-vstel, "Shipping Point
route LIKE vbap-route, "Route
netpr LIKE vbap-netpr, "Net Price
kpein LIKE vbap-kpein, "Condition Price Unit
kmein LIKE vbap-kmein, "Condition Unit
shkzg LIKE vbap-shkzg, "Returns Item
oidrc LIKE vbap-oidrc, "DRC Code
kunwe LIKE vbap-oid_ship, "Ship-to
aufnr LIKE vbap-aufnr, "Order Number
vkaus LIKE vbap-vkaus, "Usage
kunwet LIKE kna1-name1, "Ship-to Name
zzwprofid LIKE vbap-zzwprofid, "Waste Profile ID
kunre LIKE wbrk-kunre, "Bill-to
kunret LIKE kna1-name1, "Bill-to Name
addl_schd LIKE icon-id, "Push Button For addl line
datab LIKE zsdsched-datab, "Valid-From Date
datbi LIKE zsdsched-datbi, "Valid To Date
zschdfreq LIKE zsdsched-zschdfreq, "Contract schedule frequency
frequency LIKE zsdsched-frequency, "Frequency
monday LIKE zsdsched-monday, "Mondays
tuesday LIKE zsdsched-tuesday, "Tuesdays
wednesday LIKE zsdsched-wednesday, "Wednesdays
thursday LIKE zsdsched-thursday, "Thursdays
friday LIKE zsdsched-friday, "Fridays
saturday LIKE zsdsched-saturday, "Saturdays
sunday LIKE zsdsched-sunday, "Sundays
dzieme LIKE zsdsched-dzieme, "Target quantity UoM
comments LIKE zsdsched-comments, "Comments
END OF gt_report.
data: Begin of gt_report1 occurs 0,
fksaf LIKE fplt-fksaf,
afdat LIKE fplt-afdat,
fakwr LIKE fplt-fakwr,
fkdat LIKE fplt-fkdat,
nfdat LIKE fplt-nfdat,
fpart LIKE fpla-fpart,
bedat LIKE fpla-bedat,
endat LIKE fpla-endat,
horiz LIKE fpla-horiz,
bezei LIKE tvlvt-bezei,
vbeln LIKE vbak-vbeln,
erdat LIKE vbak-erdat,
ernam LIKE vbak-ernam,
guebg LIKE vbak-guebg,
gueen LIKE vbak-gueen,
auart LIKE vbak-auart,
kunnr LIKE vbak-kunnr,
kvgr4 LIKE vbak-kvgr4,
vkbur LIKE vbak-vkbur,
vkorg LIKE vbak-vkorg,
vtweg LIKE vbak-vtweg,
vbtyp LIKE vbak-vbtyp,
name1 LIKE kna1-name1,
pstyv LIKE vbap-pstyv,
matnr LIKE vbap-matnr,
werks LIKE vbap-werks,
oid_ship LIKE vbap-oid_ship,
kpein LIKE vbap-kpein,
kmein LIKE vbap-kmein,
netpr LIKE vbap-netpr,
kdmat LIKE vbap-kdmat,
posnr LIKE vbap-posnr,
matkl LIKE vbap-matkl,
aufnr LIKE vbap-aufnr,
vkaus LIKE vbap-vkaus,
route LIKE vbap-route,
kunre LIKE wbrk-kunre, "Bill-to
kunwe LIKE vbap-oid_ship, "Ship-to
kunwet LIKE kna1-name1, "Ship-to Name
kunnrt LIKE kna1-name1, "Sold-to Name
kunret LIKE kna1-name1, "Bill-to Name
End of gt_report1.
data: gs_report LIKE LINE OF gt_report,
gs_report1 LIKE LINE OF gt_report1,
gt_sched TYPE TABLE OF zsdsched,
gt_sched_tmp TYPE TABLE OF zsdsched,
gs_sched TYPE zsdsched,
gt_sel LIKE gt_report OCCURS 0,
gt_sel1 LIKE gt_report1 OCCURS 0,
gt_vbpa TYPE TABLE OF vbpa,
gs_vbpa TYPE vbpa,
gv_auart TYPE auart,
gv_counter TYPE i.
**-- ALV variables
DATA: ls_fieldcat TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort TYPE slis_sortinfo_alv, "Sorting list
gt_sort TYPE slis_t_sortinfo_alv, "Sort
gs_layout TYPE slis_layout_alv, "List Layout
gs_variant TYPE disvariant, "Display Variant
gv_repid LIKE sy-repid,
gv_save(1) TYPE c,
ls_fieldcat1 TYPE slis_fieldcat_alv, "Field Catalog list
gt_fieldcat1 TYPE slis_t_fieldcat_alv, "Field Catalog
ls_sort1 TYPE slis_sortinfo_alv, "Sorting list
gt_sort1 TYPE slis_t_sortinfo_alv, "Sort
gs_layout1 TYPE slis_layout_alv, "List Layout
gs_variant1 TYPE disvariant, "Display Variant
gv_repid1 LIKE sy-repid,
gv_exit(1) TYPE c.
CONSTANTS: gc_a TYPE c VALUE 'A',
gc_g TYPE c VALUE 'G',
gc_re(2) TYPE c VALUE 'RE'.
Screen-control Variables
CONTROLS:
tctrl_sched TYPE TABLEVIEW USING SCREEN 1010. " Schedule lines.
*& Report ZSD_CONTRACT_LIST
*& Created on: January 21, 2007
*& Description: List of Contracts - ALV
REPORT zsd_contract_list_rental1.
INCLUDE zsd_contract_list_t01_rental1.
Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK m1 WITH FRAME TITLE text-t01.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t02.
SELECT-OPTIONS: s_vkorg FOR vbak-vkorg MEMORY ID vko,
s_vtweg FOR vbak-vtweg MEMORY ID vtw,
s_spart FOR vbak-spart MEMORY ID spa,
s_vkbur FOR vbak-vkbur MEMORY ID vkb.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln,
s_erdat FOR vbak-erdat,
s_ernam FOR vbak-ernam,
s_guebg FOR vbak-guebg,
s_gueen FOR vbak-gueen,
s_auart FOR gv_auart MEMORY ID vta
MATCHCODE OBJECT h_vakz,
s_fkarv FOR fplt-fkarv.
SELECTION-SCREEN SKIP 1.
SELECT-OPTIONS:
s_kunnr FOR vbak-kunnr,
s_kunwe FOR vbap-oid_ship,
s_kunre FOR wbrk-kunre.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t03.
SELECT-OPTIONS: s_werks FOR vbap-werks MEMORY ID wrk,
s_lgort FOR vbap-lgort MEMORY ID lag,
s_vstel FOR vbap-vstel MEMORY ID vst,
s_route for vbap-route,
s_matnr FOR vbap-matnr.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t04.
PARAMETERS: p_varia TYPE disvariant-variant MEMORY ID wrk,
p_all AS CHECKBOX DEFAULT 'X',
p_group AS CHECKBOX DEFAULT 'X',
p_rental AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN END OF BLOCK m1.
Start of Selection
START-OF-SELECTION.
PERFORM get_data.
Display ALV
END-OF-SELECTION.
IF gt_report[] IS INITIAL.
MESSAGE s419(brain).
ELSE.
PERFORM create_alv.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_varia.
PERFORM f01_f4_variant CHANGING p_varia.
*& Form get_data
text
FORM get_data .
select the appropriate rental data.
IF p_rental IS NOT INITIAL AND ( ( p_all IS INITIAL ) AND ( p_group IS INITIAL ) ).
SELECT avbeln aerdat aernam aaudat avbtyp aauart a~vkorg
avtweg aspart avkbur aguebg agueen akunnr a~kvgr4
bpstyv bmatnr bwerks boid_ship bkpein bkmein
bnetpr bkdmat bposnr bmatkl baufnr bvkaus b~route
dbezei efkarv eafdat efakwr efkdat enfdat e~fksaf
ffpart fbedat fendat fhoriz flodat ftndat b~oid_ship AS kunwe
INTO CORRESPONDING FIELDS OF TABLE gt_sel1
FROM vbak AS a
INNER JOIN vbap AS b ON avbeln = bvbeln
INNER JOIN vbpa as c ON avbeln = cvbeln
INNER JOIN vbkd AS g ON avbeln = gvbeln
INNER JOIN fplt AS e ON gfplnr = efplnr
INNER JOIN fpla AS f ON efplnr = ffplnr
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr
AND e~fkarv IN s_fkarv
AND e~fksaf = 'A'
OR e~fksaf = 'B'.
sort gt_sel1.
*ENDIF.
IF NOT gt_sel1[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel1
WHERE vbeln = gt_sel1-vbeln
AND parvw = gc_re.
Loop through captured data for additional information
LOOP AT gt_sel1 INTO gs_report1.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
posnr = gs_report1-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report1-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report1-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report1-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunnr ).
gs_report1-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunwe ).
gs_report1-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report1-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
APPEND gs_report1 TO gt_report1.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM gt_report1.
*ENDIF.
ELSE.
IF ( ( p_all IS NOT INITIAL ) OR ( p_group IS NOT INITIAL ) ) AND p_rental IS INITIAL.
Select the appropriate contract data.
SELECT a~vbeln a~erdat a~ernam a~audat a~vbtyp a~auart a~vkorg
a~vtweg a~spart a~vkbur a~guebg a~gueen a~kunnr a~kvgr4
b~posnr b~matnr b~charg b~matkl b~arktx b~pstyv b~zmeng
b~zieme b~kdmat b~werks b~lgort b~vstel b~netpr b~kpein
b~kmein b~shkzg b~oid_extbol b~oid_miscdl b~oidrc b~oid_ship AS kunwe
b~zzwprofid c~datbi c~datab b~route
baufnr bvkaus d~bezei
INTO CORRESPONDING FIELDS OF TABLE gt_sel
FROM vbak AS a
INNER JOIN vbap AS b ON a~vbeln = b~vbeln
INNER JOIN tvlvt AS d ON bvkaus = dabrvw
LEFT OUTER JOIN zsdsched AS c ON b~vbeln = c~vbeln AND
b~posnr = c~posnr
WHERE a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~vbtyp = gc_g
AND a~ernam IN s_ernam
AND a~vkorg IN s_vkorg
AND a~vtweg IN s_vtweg
AND a~spart IN s_spart
AND a~vkbur IN s_vkbur
AND a~guebg IN s_guebg
AND a~gueen IN s_gueen
AND a~auart IN s_auart
AND a~kunnr IN s_kunnr
AND b~oid_ship IN s_kunwe
AND b~werks IN s_werks
AND b~lgort IN s_lgort
AND b~vstel IN s_vstel
and b~route in s_route
AND b~matnr IN s_matnr.
SORT gt_sel.
ENDIF.
IF NOT gt_sel[] IS INITIAL.
Get Bill-to Party's for Item Lines
SELECT vbeln posnr parvw kunnr INTO CORRESPONDING FIELDS OF TABLE gt_vbpa
FROM vbpa
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND parvw = gc_re.
endif.
Select the remaining records from the ZSDSCHED Table.
IF p_group IS NOT INITIAL.
SELECT * FROM zsdsched
INTO TABLE gt_sched
FOR ALL ENTRIES IN gt_sel
WHERE vbeln = gt_sel-vbeln
AND posnr = gt_sel-posnr.
SORT gt_sched.
ENDIF.
Loop through captured data for additional information
LOOP AT gt_sel INTO gs_report.
Find the bill-to party
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
parvw = gc_re.
IF sy-subrc <> 0.
READ TABLE gt_vbpa INTO gs_vbpa WITH KEY vbeln = gs_report-vbeln
parvw = gc_re.
CHECK sy-subrc = 0 AND gs_vbpa-kunnr IN s_kunre.
ELSE.
CHECK gs_vbpa-kunnr IN s_kunre.
ENDIF.
gs_report-kunre = gs_vbpa-kunnr.
Get the Customer's Name
gs_report-kunnrt = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunnr ).
gs_report-kunwet = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunwe ).
gs_report-kunret = zcl_kna1=>get_name1( itp_kunnr = gs_report-kunre ).
Get the scheduling lines for the item line.
CLEAR gv_counter.
IF NOT p_group IS INITIAL.
If we are grouping the lines add the icon button.
LOOP AT gt_sched INTO gs_sched WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
IF gv_counter > 0.
gs_report-addl_schd = '@1E@'.
CONTINUE.
ENDIF.
MOVE-CORRESPONDING gs_sched TO gs_report.
ADD 1 TO gv_counter.
ENDLOOP.
ELSE.
Otherwise get the rest of the schedule information
READ TABLE gt_sched INTO gs_sched
WITH KEY vbeln = gs_report-vbeln
posnr = gs_report-posnr
datbi = gs_report-datbi
datab = gs_report-datab.
IF sy-subrc = 0.
MOVE-CORRESPONDING gs_sched TO gs_report.
ENDIF.
ENDIF.
APPEND gs_report TO gt_report.
ENDLOOP.
Remove any duplicates from the reporting table
DELETE ADJACENT DUPLICATES FROM gt_report.
If Show all records is initial, delete non-scheduled lines (ex. Sub-items)
IF p_all IS INITIAL.
DELETE gt_report WHERE datbi = 0
AND datab = 0.
ENDIF.
endif.
endif.
ENDFORM. " get_data
*& Form create_alv
text
FORM create_alv .
if ( ( p_all is not initial ) or ( p_group is not initial ) ) and p_rental is initial.
PERFORM initialize_fieldcat USING gt_fieldcat[].
PERFORM populate_layout CHANGING gs_layout
gs_variant.
PERFORM populate_sort USING gt_sort[].
PERFORM display_alv_report.
else.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
PERFORM initialize_fieldcat1 USING gt_fieldcat1[].
PERFORM populate_layout1 CHANGING gs_layout1
gs_variant1.
PERFORM populate_sort1 USING gt_sort1[].
PERFORM display_alv_report1.
*endif.
*endif.
ENDFORM. " create_alv
*& Form initialize_fieldcat
Get and enhance the field catalog data
-->L_FIELDCAT[] text
FORM initialize_fieldcat USING l_fieldcat TYPE slis_t_fieldcat_alv.
IF p_rental IS NOT INITIAL .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_RENTAL1'
i_internal_tabname = 'GT_REPORT'
i_inclname = 'ZSD_CONTRACT_LIST_T01_RENTAL1'
CHANGING
ct_fieldcat = l_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'VBELN'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Contract'.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNNRT'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sold-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNWET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Ship-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'KUNRET'.
ls_fieldcat-seltext_s =
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Bill-to Name'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'ADDL_SCHD'.
IF NOT p_group IS INITIAL.
ls_fieldcat-seltext_s = 'Schd'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Additional Scheduling Lines'.
ls_fieldcat-icon = 'X'.
CLEAR: ls_fieldcat-key,
ls_fieldcat-ref_fieldname,
ls_fieldcat-ref_tabname,
ls_fieldcat-reptext_ddic,
ls_fieldcat-ddic_outputlen.
ls_fieldcat-hotspot = 'X'.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ELSE.
DELETE l_fieldcat INDEX sy-tabix.
ENDIF.
READ TABLE l_fieldcat INTO ls_fieldcat WITH KEY fieldname = 'DATAB'.
ls_fieldcat-seltext_s = 'Schd From'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. From Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
READ TABLE l_fieldcat INTO ls_fieldcat1 WITH KEY fieldname = 'DATBI'.
ls_fieldcat-seltext_s = 'Schd To'.
ls_fieldcat-seltext_m = ls_fieldcat-seltext_l = 'Sched. To Date'.
CLEAR: ls_fieldcat-key.
MODIFY l_fieldcat FROM ls_fieldcat INDEX sy-tabix.
ENDIF.
ENDIF.
ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
FORM populate_layout CHANGING gs_layout TYPE slis_layout_alv
gs_variant TYPE disvariant.
gs_layout-colwidth_optimize = 'X'.
gs_layout-allow_switch_to_list = 'X'.
gs_layout-zebra = 'X'.
gs_variant-report = sy-repid.
ENDFORM. " populate_layout
*& Form populate_sort
text
-->l_SORT[] text
FORM populate_sort USING l_sort TYPE slis_t_sortinfo_alv.
ENDFORM. " populate_sort
*& Form display_alv_report
FORM display_alv_report .
gv_repid = sy-repid.
IF p_rental IS INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_report
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
ELSE.
IF p_rental IS NOT INITIAL.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'GT_REPORT1'
is_layout = gs_layout
it_fieldcat = gt_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = GT_REPORT1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
endif.
endif.
ENDFORM. " display_alv_report
*& Form initialize_fieldcat1
Get and enhance the field catalog data for rental fields
-->L_FIELDCAT[] text
*FORM initialize_fieldcat1 USING l_fieldcat1 TYPE slis_t_fieldcat_alv.
**if ***
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
**else.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'ZSD_CONTRACT_LIST_rental1'
i_internal_tabname = 'GT_SEL1'
i_inclname = 'ZSD_CONTRACT_LIST_T01_rental1'
CHANGING
ct_fieldcat = l_fieldcat1
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
***endfi.
*ENDFORM. " initialize_fieldcat
*& Form populate_layout
text
<--GS_LAYOUT
<--GS_VARIANT
*FORM populate_layout1 CHANGING gs_layout1 TYPE slis_layout_alv
gs_variant1 TYPE disvariant.
gs_layout1-colwidth_optimize = 'X'.
gs_layout1-allow_switch_to_list = 'X'.
gs_layout1-zebra = 'X'.
gs_variant1-report = sy-repid.
*ENDFORM. " populate_layout
***& Form populate_sort
text
-->l_SORT[] text
*FORM populate_sort1 USING l_sort TYPE slis_t_sortinfo_alv.
*ENDFORM. " populate_sort
***& Form display_alv_report
*FORM display_alv_report1 .
gv_repid = sy-repid.
if p_rental is not initial and ( ( p_all is initial ) and ( p_group is initial ) ).
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE = ' '
i_callback_program = gv_repid
I_CALLBACK_PF_STATUS_SET = ' '
i_callback_user_command = 'USER_COMMAND'
i_structure_name = 'gt_sel1'
is_layout = gs_layout1
it_fieldcat = gt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort = gt_sort1
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = gc_a
is_variant = gs_variant1
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = gt_sel1
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*endif.
*ENDFORM. " display_alv_report
*& Form f01_f4_variant
Get the Layout variant for the user.
FORM f01_f4_variant CHANGING c_variant TYPE disvariant-variant.
DATA: ls_variant TYPE disvariant,
l_exit TYPE char1.
ls_variant-report = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
EXPORTING
is_variant = ls_variant
i_save = 'A'
it_default_fieldcat =
IMPORTING
e_exit = l_exit
es_variant = ls_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 2.
MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
IF l_exit EQ space.
c_variant = ls_variant-variant.
ENDIF.
ENDIF.
ENDFORM. " f01_f4_variant
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
READ TABLE gt_report INTO gs_report INDEX rs_selfield-tabindex.
CHECK sy-subrc = 0.
CASE rs_selfield-fieldname.
WHEN 'VBELN'.
Set parameter ID for transaction screen field
CHECK NOT gs_report-vbeln IS INITIAL.
SET PARAMETER ID 'KTN' FIELD gs_report-vbeln.
CALL TRANSACTION 'VA43' AND SKIP FIRST SCREEN.
WHEN 'ADDL_SCHD'.
CHECK NOT gs_report-addl_schd IS INITIAL.
REFRESH gt_sched_tmp.
LOOP AT gt_sched INTO gs_sched
WHERE vbeln = gs_report-vbeln
AND posnr = gs_report-posnr.
APPEND gs_sched TO gt_sched_tmp.
ENDLOOP.
CHECK sy-subrc = 0.
CALL SCREEN '1010' STARTING AT 5 5.
ENDCASE.
ENDCASE.
ENDFORM. "user_command
*& Module STATUS_1010 OUTPUT
text
MODULE status_1010 OUTPUT.
SET PF-STATUS 'MAIN_1010'.
SET TITLEBAR '1010' WITH gs_report-vbeln gs_report-posnr.
ENDMODULE. " STATUS_1010 OUTPUT
*& Module USER_COMMAND_1010 INPUT
text
MODULE user_command_1010 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'CANC'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_1010 INPUTHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
CN41N and S_ALR_87013533 report not showing Production order planned cost
Hi Experts,
I am having issue to get total planned production order values in my CN41N or S_ALR_87013533 cost report. I am facing 2 issues :
1. CN41N repoet does not show individual material cost planned in BOM.
2. CN41N report and S_ALR87013533 report does not show total value but only picking fixed value.
Example :
1. CN41N report :
Above screenshot shows no values in Project plan cost & Order cost column but it shows total cost as a lumpsum on top for project. I need to know how can i get material cost populated here for Project Valuated stock material?
2. S_ALR_87013533
This report shows Total Cost of BOM as 1 line under Material Procurement activity similar to CN41N report. Also Order value is picking from Fixed cost from planned order and total cost is added on top. How can i get Total cost picked from production order?
Is there any Setting in PS config which allow me to pick the detail production order plan cost in both report under planned cost.
Thanks in advance.
AshishHi Ashish,
I doubt whether Item level reporting in S_ALR... (hierarchy report) is possible or not because I haven't seen item level cost in them only the lump-sum cost because they are summarized at cost object level itself. Navigation path are there which we use to go into details of cost.
Please check the following links:
https://scn.sap.com/thread/1743833
(In the above thread,focus on Mr. Mohamed Rafi comment.)
http://scn.sap.com/thread/3530080
http://scn.sap.com/thread/1311820
Order cost plan in report CN41N
Display of plan cost.,&nbsp;CN41N&nbsp;|&nbsp;ABAP,&nbsp;SAP,&nbsp;benX AG,&nbsp;benXBrain,&…
Just an additional pointer ,have a look on your costing variant and variation variant settings for material section.
Regards
Saurabh -
Calculate result as average in the report not showing average for all
Hello,
I have a calculated key figure in the query where its result should show average. I have made a setting for this calculated key figure as:
1. Calculations tab: Calculate result as "average" and calculate single value as "nothing defined"
2. Aggreagation tab: exception aggregation: Total and reference char: []
Now coming to report, BEX it showing correct average for all cells but when i run it in portal few values it is showing correct average but for few it is showing as blank. I exported this to excel then cell shows blank but cell has some values in the custom format and display values when i change the format to general from "format cells" option.
Please help me in resolving the issue- why portal not showing value for all.
Thanks,
VijayaSAP note solved the purpose.
Thanks & Regards,
Vijaya -
Crystal reports 11: Values displayed in crystal report not showing in VB6
Hi!
I updated an existing lower version of crystal report 7 to crystal report 11. Changes are the following:
1. sql query in VB6 to add fields
2. sql query in crystal report to manipulate values and not use formula. crx11 doesn't allow summary/total in formula fields.
3. report orientation
4. additional fields to view
5. font sizes, length, can grow properties, etc.
When I tested it directly in crx 11, all fields/values are displaying correctly. When I integrated it in VB 6 using Crystal ActiveX Report Viewer Library 11.0 and CR Viewer object, the field is blank.
I've tried several checking like field suppressions, conditional suppressions, etc.
By the way, I also have a report using a subrepot with conditional suppressions. Same thing is happening. The subreport data only displays the alloted space but does not show values in VB6.
Thank you in advance for your help.
Edited by: Naga01 on Jun 28, 2011 8:46 AMThanks for your response.
Before I read your response, I tried tweaking my reports and was able to resolve the issue.
Steps taken to solve the issue are the following:
a. Value not showing one field of four (4) reports.
Solution: I created new ones and integrate it in VB 6. The values are now showing. Tweaked on the line object properties, got a problem with the extended line but solved it by adjusting the height of the detail section.
b. Value not showing in sub-report.
Solution: My report used a shared variable so I can pass the condition to my sub-report. I used the new reports and just pass a query during runtime. The values in the subreport is still not showing. I added a formula and called the value in it. Values in the subreport is now showing.
I'll try to update the crystal reports version as suggested at a later time. -
CJI5 commitment line item report not showing po gross value
Dear All,
system is showing only net value in CJI5 report, actaully gross value of po must be reflected in CJI5 report and this happening in all po's like material, service's etc. example is as follows.
Example:
po net value: 1000
st 10%: 100
po gross value : 1100 (inclusive of all taxes, ed, disc. etc)
what could be the reason for not showing po gross value in commitment line item report.
Thanks & Regards,
SandeepHi,
As far as i know the commitment report will never show you the value that is inclusive of taxes. It will only show the net value of the PO.
I just tried a scenario in my system by creating a PO for a net value of 3000 GBP and based on the tax code i entered system calculated a tax of 525 GBP. However when i check CJI5 report it shows only 3000 GBP as commitment and not 3525 GBP. This is how the standard system behaves, i believe. You can cross check this in the table COOI. The COOI table also shows the net value of the PO and does not include the tax amount in commitment.
Regards,
Gokul -
RAR5.3 - SoD Report Not Showing Full Risk Description
Hello,
In a Sandbox environment, I'm playing around with/testing a new ruleset. The environment has our Production ruleset and I've added some risks to this ruleset via file upload in Configuration. The risks look great. Both the description and detailed description got imported correctly. The rules generated perfectly for these new risks I uploaded. Everything related to the risk, the way the risk is built, the rules, looks perfect. When I run Risk Analysis on test users that I know have the risk, they show on the report just as expected. However, the risk "description" is essentially missing. For example, in Management Summary View, here is what Risk B001* looks like:
B001: Basis Development & System Administration
Medium Basis TEST_USER(TEST_USER) USSPCJH40_E3
I've bolded the Risk Description.
However, here is what one of my new risks shows up like (F031, a risk we haven't put in production yet for various reasons):
F031: F031
Medium Finance TEST_USER(TEST_USER) USSPCJH40_E3
The Risk Description only says "F031." It still is hyperlinked so it still works, but I want to see the full Risk Description, obviously. When I look at the Risk in Rule Architect, both descriptions are there.
I then extracted the Rules via Rule Export and looked in the VIRSA_CC_RISKT table - the F031 description is there!
B001 (which looks fine) and F031 (which has the description missing) has entries in ALL of the same tables (unless there's a table that I'm not getting with the export?)
Can anyone help me out? Has anyone experienced a similiar issue? Why would all my newly imported risks not show a Risk Description when running Risk Analysis?
Thanks in advance!
Jes Behrens
Edited by: Jes Behrens on Feb 26, 2009 8:26 AMHi !
This report shows the schedule line items , group schedule line items and rental contact (billing plan) lines when particular checkbox is checked. The checkboxs p_all(non-schedule line) , p_group(group schedule line items) are working in my above alv report and showing result but unfortunately when p_rental is checked it dosent give me result , it says no data selected. This when checked has to show result based on a different set of selections as I have done, but its not shwoing me the result .
Kindly help please.
Thanks -
Service Bus SLA reports not showing up
Hello,
I am triggering an alert on OSB 10.3 with Report destination.
I can see the alert under SLA alert but it does not show up under Report Messages.
Reporting is enabled. I display all messages.
I have an aggregation interval of 3 minutes for monitoring and 3 minutes for the sla rule.
I checked the pointbase db tables they are empty.
OSB is running on the my laptop together with an WLS domain hosting a web service.
I read there can only be one Pointbase DB running, is this true?
Could this be the issue?
Any suggestions, anyone?
thanks,
BarossaAHA! OK, my laziness bit me in the behind.
Every time I launched SQL Developer, I got one of those "This was downloaded do you want to run it" warnings and I never turned it off.
This appears to not have been an issue when running from the folder itself.
When I pinned the exe to the start menu, I got the warning, said OK, and would actually see the report containers on the reports tab for a moment, and then it would vanish.
I unchecked the "always show this warning" box, and now everything works fine, even from the start menu
thanks much! -
SPANISH BANK STATEMENT DETAIL REPORT NOT SHOWING TRANSACTIONS
We are having issue where the spanish version of a oracle report(RDF) is not showing some columns on the right side of the report
whereas the english version is showing all the columns.
We have checked the data,lookups and the trace files but they do not show any issue.
Please help.Hi;
I suggest log a SR for your issue
Regard
Helios -
Project Plan cost report - not showing any output.
Dear Experts,
I have created several projects and done the planning. I have used work centers and activity types for manpower cost planning. Also created some PRs against the project.
When I goto the network activities and select the line item in the menu path Edit - costs - Planned/Actual - cost planned /actual
It shows me the planned cost of the activity correctly.
But when I am running the report CJI4, it shows nothing. The report is not at all executing.
I dont understand why it's \not showing.
I have checked the control key PS01 for the cost field is enabled (tick available on the cost friled)
Can any one please help me??
Thanks and Regards,
Praveen1) Please check that the WBS element is integrated in plan, and the plan integration is fully activated in the project.
2) Plan line items are only written in certain cases.
The following rules are valid:
1. Plan line items can be written in
a) structure-oriented cost planning CJ40 (total values, annual values),
b) cost planning on orders KO12,
c) unit costing independent of cost elements,
d) structure-oriented revenue planning CJ42 (total values, annual values)
e) structure-oriented financial budgeting CJ48 (total values, annual values, period values)
f) primary cost planning,
g) activity planning,
h) revenue element planning.
2. Plan line items are never written in
a) Unit costing on cost element level
b) Network costing
3. Line items are only written if a user status permits the business transaction 'Write plan line items' explicitly.
Exception:
For plan-integrated WBS elements and orders, line items are written in cost-element oriented planning if integrated corporate planning is activated in the fiscal-year parameters of the respective plan version, regardless of the user status.
4. Plan line items for structure-oriented planning can only be displayed in the respective planning transaction under menu option "Extras-->Line items".
Let me know if this was useful
Ritesh -
Why are Financial Reporting Reports not showing in FR studio?
Hi,
We had to change the BI server's DNS name. We have Workspace, FR, WA, IR installed all on this BI server. After changing the DNS name, and reconfiguring using ConfigTool, we were not able to find our old FR reports.
1) Can anyone tell me in which table our FR reports are stored in our BI Oracle RDBMS schema?
2) Any idea what I need to do to get these FR reports to show up in FR studio ?
Thanks in advanceYou are GURU!! Yes, I was able to recover all my reports after I restore both schema and D:\Hyperion\BIPlus\data directory from backups made at the same time (they must be in sync).
Quick question: I don't understand what is "Report dats". Do you mean Report Data?
in your statement:
"The Report dats resides in D:\Hyperion\BIPlus\data directory" -
Post Author: kekaske
CA Forum: JAVA
We are moving from the crystal reports server to building our own so that we can integrate it with our intranet. When I run my reports in Java the sub reports are not showing up. I have 3 sub reports. The main report shows up just fine. The only change I have made is changing the datasource in the reports from ODBC to JDBC. I have changed the datasource in the sub reports as well.All the reports that don't have sub reports in them work perfect. What else should I look at or troubleshoot? Thanks, KevinI am using Crystal Reports XI, not Release 2. Sorry about that mix-up.
I downloaded the latest sp (4) per your url and installed it. Now the product version is 11.0.0.2495
SP4 did not solve the problem.
Here is my reference to the DSN in the VB code: cnSQL.ConnectionString = "Provider=MSDASQL.1;Persist Security Info=False;Data Source=DSN-SQL"
(This DSN and VB code have worked for years. Nothing is different now other than the fact that I am now using a Subreport for the first time.) When I created the DSN two years ago, I used the "SQL Server" driver found in the XP Administrative Tools (ODBC) section, and it has worked fine since then.
I saved out one of the sub reports and it did not run initially from the VB app, but after I removed the "Change Subreport Links" to not have any links, it ran correctly in the VB app. Then I went back to the full report (main and 3 subreports) and removed all links in the subreports. Then I re-added the full report back into the VB app and still no data shows on the 3 subreports. Data only shows on the main report. I have experimented with both using and not using Subreport Links in the report and nothing I do seems to make any difference.
In the VB code, I pass two parameters to the report. The first is the customer key that is used in the main report and three subreports to print the customer's invoice. The second parm is a flag to print or not print special instructions on the invoice.
I suspect the problem with not printing data on the subreports is somehow due to the subreports not connecting to the SQL database or possibly not receiving the two parms which would cause them to not select a SQL record from the Invoice table. But here I am just guessing.
Thank you for your continued help
Edited by: Eric Young on Oct 7, 2008 2:28 AM
Edited by: Eric Young on Oct 7, 2008 2:28 AM
Maybe you are looking for
-
Generate a list of users who has admins rights in BO XI.
Post Author: bstn82 CA Forum: Administration Any one has an idea how to produce a list of users who has admins rights?
-
How do I cut out imported objects and make background transparent?
Illustrator CS3. I have embedded a jpeg picture which I need to cut out and make the background transparent. How do I do this? An opacity mask? How do I create a mask the same shape as the object I need to cut out? The object needs central pieces cut
-
I keep getting a rogue image in one of my slideshows that pops up at the end of the slideshow. It doesn't appear in the preview mode and I already deleted the entire slideshow and redragged all the pictures back into the slideshow. This one image kee
-
How can i use multi threading in labview?
i want to run a Digital storage oscilloscope and an energ ratio meter simultaneously using labview. i am using GPIB interfacing and windows XP. how can i do this using multi threading. Bot the instruments shd run and give data at the same time.
-
Excessive LDAP Queries from WLS 6.0 SP2 RP3
We have an application served from WLS 6.0. Our current version of WLS is: Service Pack 2 05/24/2001 11:55:28 #117037 RP3 for 6.0 SP2 02/21/2002 17:46:45 #167070 WLS has been configured to query an LDAP server for user authentication. The issue we ar