Reprocess the bdc error session

hi all
in bdc session method .i have a error log how. ican reprocess the error log

Go To Analyze Session in SM30 for your records processed with errors.
Compare with your text file to trace the records not processed.
Copy them to new text file. do the corrections and re-processed.
But be sure that you had kept the previous session, otherwise you are not able to trace the records.
Regds,
Anil

Similar Messages

BDC Error Session and Database update??

Hi all,
I am having Query about BDC Error Session. If I see the log of Error Session, then few Transactions are processed and few are in incorrect status.
Those transaction, which are processed, Does it mean that it has updates the database successfully or Error Session will never update the Database?
Thanks in advance.

Thanks for your reply
Message was edited by: Vipin Nagpal
Message was edited by: Vipin Nagpal

How to find the bdc error

i did one bdc program, it's running correctly but data not upload. so how to lanalyze the error.

Dear
you can find error with following link
How to find errors from BDC log
Regards

BI Administrator error: Session Management will not work

Hi!
I am about to set up BI Administrator Addon in SAP Portal. All the configuration steps seems to be ok.
Unfortunately when I try to start some of applications of BI Administrator I get the following error:
Session Management will not work.
Please check the DSM log file for details
Question:
How can I solve this problem?
Thank you very much!
regards

Hi
This error means--Please notify us of this problem by submitting an IT Service Request (Please Note: In order to log into the Infra system, you will need to preface your NKU account with nku\. For example, if your user name is smithj7, the "User Name" field would need to be populated with nku\smithj7.)
under the problem type "SAP BW/Portal.
Much of EP / BASIS issue.
Hope it helps

Find BDC error in Zprogram

Hi guys,
Anybody have program or utility to pick up the BDC Errors from Zprograms.
I want to know number of BDC errors(Due to Screen change/Field change/etc) exists in set of zprograms.
Appreciable if Listing of BDC errors and error count can be produced by it.
reference please.
Thanks.
Ambi.

Hi,
better use :
CALL TRANSACTION tcode USING bdcdata MODE mod MESSAGES INTO etab.
if sy-subrc <> 0.
-> analyse error-table etab
A.

How can we execute the BDC session in error mode through se38 programme

Dear Experts,
How can we execute the BDC session in error mode through se38 programme....
we can execute the session in the below 2 ways
1) Through SM35 we can process the session manually in foreground/Error mode or Background also.
2) through RSBDCSUB (standared Program) we can process the session in back ground.
But i want to process the session in foreground or Error mode..Do we have any standared program for process the session in foreground or error mode.
Please suggest.
Regards,
Bussa.

Hi,
SAP was smart enough to provide this little program: RSBDCCTU
Sandra
Edited by: Sandra Rossi, 15 minutes later
Maybe the answer to your question is just to use CALL TRANSACTION ... USING ... (see the example in RSBDCCTU). You can also generate such a program using transaction SHDB

BDC Error in background 'The difference is too large for clearing'

Hi,
In foreground the BDC session runs perfectly and errors only when the program is running in the background.
In background, the following messages are captured.
Select line items first of all     FB05     1     SAPMF05A     0300
163 items were selected     FB05     1     SAPMF05A     0710
The difference is too large for clearing     FB05     1     SAPDF05X     3100
No batch input data for screen SAPDF05X 3100     FB05     1     SAPDF05X     3100
But, in real BDCDATA contains all the above said screens.   Kindly note the above comes as a success message in the background and does not appear in the foreground.
Any response is highly appreciated.
Ashish

Hello Ashish,
I suggest you to run FB05 for clearance for the same data and check if this message is encountered.
Please contact your functional guy and check the business reasons about this message.
Kindly go through the below links
http://scn.sap.com/thread/985136
https://scn.sap.com/thread/472069
Thanks

BDC error :Maximum number of sessions reached

Hi!
I have created a BDC program which outputs the available Orders / delivberies for a particular plant with checakboxes to select each lines or multiple selection. On selecting one opr more line from output and clicking a GENERATE button on the output screen the bdc calls in VF01 transaction and subsequently the billing documenst are automatically generated and sent to the printer directly.
The problem: The problem happend when more than 6 documents are selected or if the selected no. of items are more than the screens opened in any enviornment where we are running , it gives an error message that "maximum number of sessiosn reached" . This creates aproblem is knowing which documenst or how many invoices have already printed and which ones did not.
I was wondering if there is nay other way of stopping this problem of miximum number sessions recahed. I mean if there is anyway we can eliminate each processesed session so that it does not have to create so many screens even if more documents are selected.
Thanks

I have the sales document number that I am using to create the billing document. I am not prety sure where to use it. I ahve set the parameter ID AUN alread6.
refresh: bdc_tab.
perform update_bdc using: 'X' 'SAPMV60A'    '0102',
                            ' ' 'BDC_CURSOR' 'RV60A-FKART',
                            ' ' 'RV60A-FKART' lc_fkart,
                            ' ' 'BDC_OKCODE' '/00'.
loop at it_vbeln into wa_vbeln.
    ln_index = sy-tabix.
*   Up to the second delivery of the BDC add the Delivery to the screen,
*   after that click the More Documents for every entry. logic changed for DEVK902353
*   changed again in added for every line DEVK910604
    case ln_index.
      when 1.
        concatenate 'KOMFK-VBELN' '(' ln_index ')' into lc_field.
        if li_lines = 1.
          perform update_bdc using: ' ' lc_field wa_vbeln.
        else.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        endif.
      when others.
        if p_rdos = 'X'.
          concatenate 'KOMFK-VBELN' '(2)' into lc_field.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    'X' 'SAPMV60A'   '0102',
                                    ' ' 'RV60A-FKDAT' lc_date,
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        else.
          concatenate 'KOMFK-VBELN' '(2)' into lc_field.
          perform update_bdc using: ' ' lc_field wa_vbeln,
                                    'X' 'SAPMV60A'   '0102',
                                    ' ' 'BDC_OKCODE' 'FKAN'.
        endif.
    endcase.
endloop.
* VF01 will go to a different screen if only one line selected
if li_lines eq 1.
    perform update_bdc using: 'X' 'SAPMV60A' '0104',
                              ' ' 'BDC_OKCODE' '=SICH'.
else.
    perform update_bdc using: 'X' 'SAPMV60A' '0102',
                              ' ' 'BDC_OKCODE' '=SICH'.
endif.
{color:green}call transaction 'VF01' using bdc_tab options from lwa_bdcoptions
                           messages into it_bdcmess .{color}
write: / 'BDC Messages:'.
skip.

Getting error code -251723766 returned from the "EthernetIP Open Session.vi" while trying to talk to a PLC

I have created a LabVIEW application using LabVIEW 2012 (64 bit) that attempts to communicate with a PLC. I do not actually have the PLC here at the Rockwell Collins facility in Cedar Rapids, Iowa.
I have sent this application to my co-worker, who is located at a different Rockwell Collins facility in Tustin, California, where the PLC is actually located.
My coworker in California is reporting that when he starts up my application under WIN7 he gets an error code of "-251723766" when the S/W performs the "Open Session" function during initialization.
I looked at the online help and the value "-251723766" is not defined.
When I run the same application under WIN7 here in Cedar Rapids I do NOT get the runtime error code of "-251723766" during initialization.
Do you have any ideas for what is causing this problem?

Hello
I never really understood what the session parameter was all about.
The documentation says that the session parameter is optional.
Based on your advice I have deleted the code from my block diagram that was doing an Open Session.
Are there any example LabVIEW programs that I can study that actully use the Ethernet/IP S/W to connect to a PLC?
I have attached 2 screen captures that show how my LabVIEW VI's are accepting the session parameter.
Do you think I should delete the input and output parameters for session?
Please let me know.
Thank you
Todd J. Miller
319-295-8689
Attachments:
OpenSessionProblem#4.jpg ‏107 KB
OpenSessionProblem#5.jpg ‏189 KB

The pooled JMS session is enlisted in another transaction error

I have an MDB with pool size 2 deployed in weblogic 9.2.3(linux). I see the following error in server logs.
<May 27, 2009 7:32:26 AM CDT> <Error> <EJB> <BEA-010079> <An error occurred while attempting to receive a message from JMS for processing by a message-driven bean: javax.jms.JMSException: [J2EE:160054]The pooled JMS session is enlisted in another transaction and may not be used elsewhere
The exception is : javax.jms.JMSException: [J2EE:160054]The pooled JMS session is enlisted in another transaction and may not be used elsewhere
     at weblogic.deployment.jms.JMSExceptions.getJMSException(JMSExceptions.java:22)
     at weblogic.deployment.jms.WrappedTransactionalSession.enlistInTransaction(WrappedTransactionalSession.java:196)
     at weblogic.deployment.jms.WrappedMessageConsumer.receive(WrappedMessageConsumer.java:198)
     at weblogic.ejb.container.internal.JMSMessagePoller.processOneMessage(JMSMessagePoller.java:297)
     at weblogic.ejb.container.internal.JMSMessagePoller.pollContinuously(JMSMessagePoller.java:394)
     at weblogic.ejb.container.internal.JMSMessagePoller.pollForParent(JMSMessagePoller.java:517)
     at weblogic.ejb.container.internal.JMSMessagePoller.run(JMSMessagePoller.java:533)
     at java.lang.Thread.run(Thread.java:595)
>
any idea why this error is coming??

Looks it is like a bug, you can ask patch for from support.

I get the following error message when trying to sync "could not be synced because the sync session failed to finish"

hi just got a gift of an ipod touch model MD720LLA with operating system iOS7.1.2
I get the following error message when trying to sync "could not be synced because the sync session failed to finish"
what could be the problem
have also uninstalled and re installed itunes
thanks
<Re-Titled By Host>

Mac Unidentified Developer Issue
Here's how to open apps that apple should not be blocking:
http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

Error: Could not get markup. The cookie or session is invalid or ...

When I run the portlet getting the below error:
Error: Could not get markup. The cookie or session is invalid or there is a runtime exception.
I have gone through the log, it's processing the request.
Any help on this ...

first can you give us some idea about which product/component/platform/version are you working with. and how did you edit the 'portal prefs'.
thanks!

Icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either.

icloud is not backing up on my Ipad and Iphone. i also tried conneting to the computer to back it up and i get the following error message back up could not be completed beacause a session could not be started. also photo stream is not updating either on both devices

Curretly, there is an iCloud blackout. It started this morning around 2AM California time (Pacific), 5AM New York (Eastern). A lot of people have been having issues all day, including me. No iCloud services are online. Even Find My iPhone is down.

[Forum FAQ] Troubleshoot the error "The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode"

Symptom
RD License server is a key component of RDS. It licenses users to access RDS servers.
After purchase the required RDS CALs, we need to activate the RDS License server and install the purchased RDS CALs. However, during the installation or after installation, we may face errors
about RDS License.
In most cases, the following error may occur.
Error:
The Remote Desktop Session Host server is in Per User licensing mode and No Redirector Mode, but license server "Server name" does not have any installed licenses with the following
attributes:
Product version: Windows Server 2012
Licensing mode: Per User
License type: RDS CALs
Troubleshooting
1. Check whether the RD License Configuration is configured properly and there are no Warnings in the Event.
2. The License Server should be part of 'RD Server License' group in Active Directory Domain Services.
3. Check if the Licensing Mode is correct.
- To change the Licensing Mode we can use RD Licensing diagnose, PowerShell cmdlet and Group Policy.
Via PowerShell cmdlet:
To change the licensing mode on RDSH/RDVH:
$obj = get-wmiobject -namespace "Root/CIMV2/TerminalServices" Win32_TerminalServiceSetting
$obj.ChangeMode(value)
# Value can be 2 - per Device, 4 - Per user
Via Group Policy
Path: Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session Host -> Licensing
Use the specified RD license servers = FQDN of server name
Set the Remote Desktop licensing mode =
Per User
However, if issue persists, please provide detailed information and post the question in the
Remote Desktop Services (Terminal Services) forum.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi Richard,
You need to uninstall Remote desktop session host feature. After removing it, you will default two connections which does not need to purchase RD CALs'.
Thanks,
Umesh.S.K

Session "" failed to start with the following error: 0xc0000022

Newly installed Windows 2012 R2 server throws the following event roughly every 3 minutes:
Session "" failed to start with the following error: 0xc0000022
The PID referenced in the event points to WmiPrvSE.exe running as NETWORK SERVICE. Is there something obvious I'm missing because I'm not sure where to go with the information I found so far. I already did my fair sharing of Binggling and everything
I find doesn't apply or doesn't fix the problem.

Hi,
Can you let me know the full event log content?
I suggest you restart the Windows Management Instrumentation service.
Niki Han
TechNet Community Support

Reprocess the bdc error session

Similar Messages

Maybe you are looking for