Reprocessing of XML Messages with status 003 i.e. Successfully Processed in

Hello Expets ,
I have to reprocess the XML messages which are already in successfully processed state ( 003 ) in ECC without posting the data due to some abap bug how am i going to do it.
Is there any way i can changes the status of the xml message to Manual restart possible or some other way to do it...!
Thanks in Advance

HI,
It's possible with some config change. (Hope your system is not production)
First solution:
The specified item was not found.
Second:
Insert the payload in RWB using test tab and send the data again

Similar Messages

Program to cancel xml message with status error or schedule ?

Hi,
Any program that can cancel xml message base on period. because i have about 100 thousand unuse xml message that accidentaly generated. because it is too long if i need to cancel 1 by one.
Regards
Fernand

Hi All,
I already try this program below :
RSXMB_CANCEL_Message - cancel the meesage with errors.
RSXMB_CANCEL_NO_COMMIT_MSG -cancel the message processing for messages without commit.
RSXMB_CANCEL_NOT_REST_MESSAGES - Cancel Xi messages with errors that cannot be restarted
but then no result selected. i need to select manual those message and cancel using cancel button.
please advise.
Thank you and best regards
Fernand

Deleteing messages with status 003 in persistence layer

Dear All
my XI DB is getting bigger and i have found that after running the report RSXMB_SHOW_STATUS , it has Message Status:      003 Number:          5.400.374 messages in DB .. my question is how can i delete theese messages from XI ? what need to be done after delting theese from DB ? will reorg is sufficint ?
apprciate your urgent sujestion in deleteing status 003 (5.400.374) messages permently from the DB ( please see the extract from the report also)
Regards
Buddhike
Number of Messages in Database:
6.180.784
Number of Messages in Client:
6.180.864
Number of Messages for Reorganization in Client:
6.180.927
Number of Messages to Be Archived in Client:
   182.896
Number of Logically Deleted Messages in Client:
         0
Number of Archived and Logically Deleted Messages in Client:
         0
Message Status
==============
Message Status:      001 Number:             28.971
Message Status:      002 Number:                  0
Message Status:      003 Number:          5.400.374

Hi Buddhike,
To me it looks like you are missing setup of archiving/deletion of messages in the SAP PI system.
Please refer to these:
http://help.sap.com/saphelp_nw04s/helpdata/en/f5/d347ddec72274ca2abb0d7682c800b/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/41/b715015ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Best regards,
Jacob

XML Message is status scheduled on R/3 side

Hi All
While trying to send message via outbound ABAP proxy i am getting my XML message in status "scheduled (commit work follows)" on R/3 side ... My queues are also registered .. I tested the HTTP connection to XI server also and it seems fine .. wonder why still no messages are appearing on XI system ?
Please provide help ?
Thanks

To register queues;
TCODE SXMB_ADM -> Manage Queues -> Register the Queues.
you can also run the report RSXMB_REGISTER_QUEUES

How to Post XML Messages with SOAP Headers to a Trading Partner URL

Hi All,
Greeting to the Oracle B2B Community. We are currently working on how to post a Custom XML Message with SOAP Headers to a Trading Partner URL. I would really appreciate if anybody could provide me some inputs or links to some documentation on how to achieve the above requirement. The details are below:
1. Our Internal Application generates a Flat File (PO Extract).
2. The Extract then needs to be transformed to an XML Message. We are planning to use BPEL to do the transformation to XML Message.
3. Once it is transformed to an XML message it needs to be posted to the Trading Partner URL as an HTTP Post and with SOAP Headers.
We are planning to use B2B to do the posting but I am not sure on how to do the set-ups and what all parameter files in B2B needs to be updated in order to achieve the same. Also it is mandatory that we send SOAP Headers in the XML Message.
Thanks In Advance for your help.
Regards,
Dibya

Hello Dibya,
As you are already doing the transformation from Flat file to XML in BPEL which is typically the capability of B2B, please use the Soap binding in BPEL to send the document to Trading partner.
Rgds,Ramesh

How do I process messages with status = "Holding"

Hi,
How do I process messages with status = "Holding" from the RWB-Message Monitoring - Adapter Engine?
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
I tried to cancel the one with the smallest sequential number, but I got the error - "Unable to cancel 1 of 1 messages; update the status"
Please help.
Thanks
Sudheer

Hi,
"Holding comes into play when ur scenario is having multiple inbound interfaces and you checked "Maintained order at runtime"in interface determination in ID. Suppose message will hit first inbound interface once it is successful then it will hit second inbound interface. If first inbound interface fails then most of the message will be in "Holding" status depends upon XI AF queues ID.
I did a quick scan for records with errors in the same queue (ConversationID), but could not find any.
You will not find bcoz of AE archiving settings.
Try to check the with business guys, whether they need the order of processing. If not the case try to Uncheck the box "Maintain Order at runtime".
Regards,
Rao.Mallikarjuna

Need to change XML message with 014 to a FINAL state

Experts,
I have the following QA system:
NW PI 7.11 sp6
I have found 23 ASYNC messages with status type 014 (SYSTEM ERROR, Manual Restart Possible). I want to change those to a FINAL state of 021 (cancelled manually).
I go to SXMB_MONI, and pull those messages up. If I highlight any of them, and click the "Cancel Processing of Messages with Errors" button, I get this type of error:
Message CF02E498B92011E0BF7700000050343A still scheduled in queue XBTO1___0002
Message no. XMS_ADM141
Message CF02E498B92011E0BF7700000050343A, which is to be canceled or started is still awaiting processing in the qRFC queue XBTO1___0002 and cannot therefore be canceled or restarted. Check in the qRFC monitor or XI monitor whether the message is still awaiting processing or whether it has already been processed.
Message already scheduled
OK...So I checked the queues from the error message, but there is nothing there. I'm sure of that.
So then I tried to execute report RSXMB_CANCEL_MESSAGES but it does not "find" them.
Any ideas? Many thanks,
NICK
Edited by: Nick Wells on Aug 4, 2011 9:18 PM

SAP support resolved the issue. I had to apply note:
Note 1547908 - XI Runtime: Message restart impossible after dump
also had to create the zreport attached to the note, and run that report one time. Then I was able to cancel the ASYNC messages.
NICK

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous peopl

After soak test update, I get error messages repeatedly. The majority are "unfortunately, messaging has stopped", but you can replace messaging with "android os", or any other process, as it happens with more than just messaging. I have had numerous people call and ask why I didn't reply to their texts...and I look, but have not received any new texts. YES, I have restarted phone. I have cleared data as well as cache on all apps. I have downloaded the vzw messaging app, which seems silly, since it happens with several different processes and apps, but all to no avail. I am missing texts from my employer, from my family. This did happen, but rarely, before this "soak test". It is now Kitkat version 19.6.3.obake_verizon.en.US. THIS is when I started having problems...like 50 times a day kind of problems! I have seen hundreds of posts all over the internet over the past 3 days. Does no one know how to fix this??? Shouldn't there be a way to revert phone to a pre-update state? and no, hard reset did NOT work!!!! I have been with verizon for well over 15 years, but I have not upgraded my lines and will not in July either. This is ridiculous. It's not like my games aren't working, it is my messaging and "android os"...my lifeline at work!

kristinaf333,
Oh no, I am sorry to hear your messages are not working since the software update. I greatlly appreciate doing all that troubleshooting to try and get the messaging application back in business. I know how much I rely on my messages so I can understand the urgency to get this resolved. Have you had a resolution ticket opened since you started experiencing issues with your messages? Does this happen with all contacts or just some? Please provide additional information to ensure we get to the bottom of this for you.
KarenC_VZW
Follow us on Twitter @VZWSupport

Purging EOIO messages with status "Holding" at the adapter level in XI.

Hi,
I want to purge a set of messages (some 800) with status "Holding" at Adapter level in RunTime Workbench. I have gone through the blog "/people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework which explain the way to reprocess the messages which are stuck in EOIO so that the rest in queue are processed but is there a way to purge a large number of messages in a EOIO queue which are holding for long, at the adpater framework level thorugh some option in Runtime workbench or Visual Administrator of J2EE server on which XI is running ?

Hi Gourav,
What do you mean by delete files from folder.
I have this problem and I can't get rid of the messages that are stuck in the adapter engine.
If I need step 3. how is that done?
Thanks.

How to split big xml-messages with file inbound adapter

Hello,
we have big xml-messages in our filesystem, which are processed by XI 3.0 (SP11). We are using the file inbound adapter. Now we want to split these big xml-message into some smaller messages.
Exist there a corresponding function to the "xml.recordsetsPerMessage" which is working with xml-files?
Thanks!
Regards
Stefan

Hi,
maybe you can split the message in the BPM
with 1:N mapping?
Process Integration (PI) & SOA Middleware
I don't think anythink like "recordsetsPerMessage" is possible for xml messages
Regards,
michal

Messages with Status "Scheduled" or "Sceduled for Outbound Processing"

Hi All,
When i run my interface, sxmb_moni shows the status of messages as "Scheduled" or "Sceduled for Outbound Processing".
I know the reason and the problem gets resolved when I unlock the queues.
But, is there a solution that I can resolve this completely? Reason being, everytime the interface is triggered, I have to unlock the queues. And if it is ccBPM scenario, I have to unlock multiple times, to acheive the flow completion
Thanks,
Swapna

Hi,
Check if u have set the value for monitor parameter QRFC_RESTART_ALLOWED to 1. default is 0.Also if your queues are registered in SMQR.Also checvk these reports
· RSARFCSE: Restart an LUW (background job)
· RSARFCEX: Restart tRFC LUWs (background job)
· RSQOWKEX: Restart QOUT qRFC LUWs
· RSQIWKEX: Restart QIN qRFC LUWs
Thanks!
Edited by: sudhir tiwari on Oct 10, 2008 12:19 PM

XML message with no matching workflow instance

Hi all,
I have a JMS application that sends XML messages to WLPI. I want to ask:
1. what will happen to the XML message if it doesn't match any workflow instance?
2. is there a way for the JMS application to know that the XML message didn't
match any workflow instance?
Any help would be greatly appreciated.
Thanks!

If the message doesn't match any template instance, then the message is sent to
the WLI_FailedEvent queue. However, if the xml doesn't find a template because
it failed the "condition" of any start node, then the message is consumed by that
template -- but the message disappears. :-( I opened a ticket on that one because
I thought that I should still be notified, but BEA confirmed that that is designed
behavior. This is for WLI 7.0
"Jo-Ann de Leon" <[email protected]> wrote:
>
Hi all,
I have a JMS application that sends XML messages to WLPI. I want to ask:
1. what will happen to the XML message if it doesn't match any workflow
instance?
2. is there a way for the JMS application to know that the XML message
didn't
match any workflow instance?
Any help would be greatly appreciated.
Thanks!

Cannot see context menu for XML messages with Safari and Google Chrome

Hi All,
I am unable to see Context menu with the option of Create, Edit, Delete etc. for KM messages. This problem persists with Safari, Chrome and IE9 browsers. This thing works fine on IE7 and IE8 browesrs.
On clicking History and Options buttondoesn't perform any action i.e. we cannot see the list of options when clicking on those. This problem also persists with the above mentioned browsers.
Also, with IE9 , I am unable to create New message when clicking on New button. The XML form doesnt open on the button click.
The portal version I am using is EP 7.0.
Can someone help me out with this?
Thanks a lot in advance.
Regards,
Archana

Hello Archana,
You should check the PAM to see if your browser is supported with your current EP verison.
http://service.sap.com/pam
Regards,
Lorcan.

[XQuery] How to transform from JSON Message to XML Message with XQuery

Hi guys,
I'm in a job of converting a restful webservice to soap. Tool for convertation uses XQuery.
Now i need to convert a message like thi link http://jsontoxml.utilities-online.info
JSON
"anagrafica": {
"testata": {
"nomemercato": {
"-id": "007",
"#text": "Mercato di test"
"data": "Giovedi 18 dicembre 2003 16.05.29"
"record": [
"codice_cliente": "5",
"rag_soc": "Miami American Cafe",
"codice_fiscale": "IT07654930130",
"indirizzo": {
"-tipo": "casa",
"#text": "Viale Carlo Espinasse 5, Como"
"num_prodotti": "13"
"codice_cliente": "302",
"rag_soc": "Filiberto Gilardi",
"codice_fiscale": "IT87654770157",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Biancospini 20, Messina"
"num_prodotti": "8"
"codice_cliente": "1302",
"rag_soc": "Eidon",
"codice_fiscale": "IT887511231",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Bassini 17/2, Milano"
"num_prodotti": "18"
"codice_cliente": "202",
"rag_soc": "SkillNet",
"codice_fiscale": "IT887642131",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Chiasserini 11A, Milano"
"num_prodotti": "24"
"codice_cliente": "12",
"rag_soc": "Eidon",
"codice_fiscale": "IT04835710965",
"indirizzo": {
"-tipo": "casa",
"#text": "Via Cignoli 17/2, Roma"
"num_prodotti": "1112"
"codice_cliente": "5",
"rag_soc": "Miami American Cafe",
"codice_fiscale": "IT07654930130",
"indirizzo": {
"-tipo": "casa",
"#text": "Viale Carlo Espinasse 5, Como"
"num_prodotti": "13"
"codice_cliente": "302",
"rag_soc": "Filiberto Gilardi",
"codice_fiscale": "IT87654770157",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Biancospini 20, Messina"
"num_prodotti": "8"
"codice_cliente": "1302",
"rag_soc": "Eidon",
"codice_fiscale": "IT887511231",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Bassini 17/2, Milano"
"num_prodotti": "18"
"codice_cliente": "202",
"rag_soc": "SkillNet",
"codice_fiscale": "IT887642131",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Chiasserini 11A, Milano"
"num_prodotti": "24"
"codice_cliente": "202",
"rag_soc": "SkillNet",
"codice_fiscale": "IT887642131",
"indirizzo": {
"-tipo": "ufficio",
"#text": "Via Chiasserini 11A, Milano"
"num_prodotti": "24"
"codice_cliente": "12",
"rag_soc": "Eidon",
"codice_fiscale": "IT04835710965",
"indirizzo": {
"-tipo": "casa",
"#text": "Via Cignoli 17/2, Roma"
"num_prodotti": "1112"
XML
<?xml version="1.0" encoding="UTF-8"?>

<anagrafica>
     <testata>
          <nomemercato id="007">Mercato di test</nomemercato>
          <data>Giovedi 18 dicembre 2003 16.05.29</data>
     </testata>
     <record>
          <codice_cliente>5</codice_cliente>
          <rag_soc>Miami American Cafe</rag_soc>
          <codice_fiscale>IT07654930130</codice_fiscale>
          <indirizzo tipo="casa">Viale Carlo Espinasse 5, Como</indirizzo>
          <num_prodotti>13</num_prodotti>
     </record>
     <record>
          <codice_cliente>302</codice_cliente>
          <rag_soc>Filiberto Gilardi</rag_soc>
          <codice_fiscale>IT87654770157</codice_fiscale>
          <indirizzo tipo="ufficio">Via Biancospini 20, Messina</indirizzo>
          <num_prodotti>8</num_prodotti>
     </record>
     <record>
          <codice_cliente>1302</codice_cliente>
          <rag_soc>Eidon</rag_soc>
          <codice_fiscale>IT887511231</codice_fiscale>
          <indirizzo tipo="ufficio">Via Bassini 17/2, Milano</indirizzo>
          <num_prodotti>18</num_prodotti>
     </record>
     <record>
          <codice_cliente>202</codice_cliente>
          <rag_soc>SkillNet</rag_soc>
          <codice_fiscale>IT887642131</codice_fiscale>
          <indirizzo tipo="ufficio">Via Chiasserini 11A, Milano</indirizzo>
          <num_prodotti>24</num_prodotti>
     </record>
     <record>
          <codice_cliente>12</codice_cliente>
          <rag_soc>Eidon</rag_soc>
          <codice_fiscale>IT04835710965</codice_fiscale>
          <indirizzo tipo="casa">Via Cignoli 17/2, Roma</indirizzo>
          <num_prodotti>1112</num_prodotti>
     </record>
     <record>
          <codice_cliente>5</codice_cliente>
          <rag_soc>Miami American Cafe</rag_soc>
          <codice_fiscale>IT07654930130</codice_fiscale>
          <indirizzo tipo="casa">Viale Carlo Espinasse 5, Como</indirizzo>
          <num_prodotti>13</num_prodotti>
     </record>
     <record>
          <codice_cliente>302</codice_cliente>
          <rag_soc>Filiberto Gilardi</rag_soc>
          <codice_fiscale>IT87654770157</codice_fiscale>
          <indirizzo tipo="ufficio">Via Biancospini 20, Messina</indirizzo>
          <num_prodotti>8</num_prodotti>
     </record>
     <record>
          <codice_cliente>1302</codice_cliente>
          <rag_soc>Eidon</rag_soc>
          <codice_fiscale>IT887511231</codice_fiscale>
          <indirizzo tipo="ufficio">Via Bassini 17/2, Milano</indirizzo>
          <num_prodotti>18</num_prodotti>
     </record>
     <record>
          <codice_cliente>202</codice_cliente>
          <rag_soc>SkillNet</rag_soc>
          <codice_fiscale>IT887642131</codice_fiscale>
          <indirizzo tipo="ufficio">Via Chiasserini 11A, Milano</indirizzo>
          <num_prodotti>24</num_prodotti>
     </record>
     <record>
          <codice_cliente>202</codice_cliente>
          <rag_soc>SkillNet</rag_soc>
          <codice_fiscale>IT887642131</codice_fiscale>
          <indirizzo tipo="ufficio">Via Chiasserini 11A, Milano</indirizzo>
          <num_prodotti>24</num_prodotti>
     </record>
     <record>
          <codice_cliente>12</codice_cliente>
          <rag_soc>Eidon</rag_soc>
          <codice_fiscale>IT04835710965</codice_fiscale>
          <indirizzo tipo="casa">Via Cignoli 17/2, Roma</indirizzo>
          <num_prodotti>1112</num_prodotti>
</record>
</anagrafica>
I guest this a general case so there must be an example for this somewhere on the internet but i haven't found it yet. So i put on forum and hope someone already knows this.
Thank for u help.
Regards,
Tien86.
Edited by: tien86 on 01:00 02-12-2011
Edited by: tien86 on 00:43 03-12-2011

You didn't mention trying these two steps:
If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
Back up and restore your device as new.
... which are listed as steps 4 and 5 near the middle of this article:
iOS: Troubleshooting Messages

XAI Outbound Message with status complete not found in the Source Folder.

hi
I Configured XAI to send a flat file into a source folder but even after all my message are in complete stage in CC&B but i can not find the file in the source folder.
Please help
Edited by: findabhi on Jun 2, 2010 5:00 AM

Please check mpl.log which can be found in <environment>\logs\system
When MPL is started you will see something like the following in the log file for an XAI Sender using the FLATFILESNDR XAI Class where <XAI SENDER name> equals the name of the XAI Sender you created.
[Tue Jun 01 16:36:15 CEST 2010] Initializing Sending manager.
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - File name pattern is C:\spl\sploutput\ccb230d1\Message$$ID.xml
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - Append is off
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - File encoding is UTF-8
[Tue Jun 01 16:36:15 CEST 2010] Sender <XAI SENDER name> - The DateTime format 'yyyyMMddmmss' will be used to append to a file name.
[Tue Jun 01 16:36:15 CEST 2010] Sender "<XAI SENDER name>" initialization completed.
What does your log file say? Please note I have Windows VM with CC&B so I can access C:\... without any issues. If you're using a different OS, make sure the file path is correct (check forward - backward slashes) and CC&B has permission to write to the designated file path.

Reprocessing of XML Messages with status 003 i.e. Successfully Processed in

Similar Messages

Maybe you are looking for