Request and Reponse Pipelines for Gateway

I had posted this in SOA Suite forum, but as it is web service related, I hope that I can get an answer on it here:
I understand the meaning of request and response pipelines for client and server Agents but I am not sure I know the same for Gateways.
Suppose that I have service A and service B and both are registered with this gateway.
Does request pipeline executes when service A is called? what about when service A makes a request to service B (calls it) ? (how can I simulate the work of a client agent with gateway here?)
Regards
Farbod

When you register the service A and Service B with the Gateway, the actual URL will now be X and Y
i.e. something like
http://myservice.com/Gateway/SID00234?WSDL
(which could map to /Service/A.asmx?WSDL)
Now when you invoke the service you are actually invoking the URL that teh gateway provided (acting as Reverse Proxy).
In your code, when Service A is making a call to Service B, you actually should change the URL to point to the one in Gateway i.e /SID00235?WSDL)
As far as your question on simulating gateway, let me take a shot at that.
The purpose of Client agent gateway is to set the security headers (UserNametoken, etc) by the Client Application so that when the service receives that you can validate the credentials.
Let me walk through the steps.
Assume you have ServiceA - ServiceA.asmx?WSDL
You register the service in Gateway - new URL will be SID00342?WSDL
You set the policy to validate the credentials that will set by your Client Agent.
Lets assume you want to validate Signature and you will configure policy to validate Signature.
Now at your client application you would use Client Agent to Generate the signature.
Instead of Client Agent what you can do is,
Register the SID00342?WSDL in gateway again
This will generate a new URL - SID00343?WSDL
Apply the Policy here, in the Request pipeline
you can add step to Generate signature
Now when you invoke this new service from the TOols/Test page,
SID00343
You will see in the log, that SID00343 generated Signature
on SID00342 log you will see it accepted messagae with Signature and then will validate the signature.
Hope this helps.
Thanks
Ram

Similar Messages

Requested and was billed for unlisted number BUT my name address and phone number is public..HELP!

I wanted privacy. I asked for and am paying for a unlisted phone number/service. I asked 3X and was promised that my information would be private. HOWEVER, I am getting SEVERAL calls a day from telemarketers and people I do not want to know my number.
I want my information to be private ASAP.

unlistednyc wrote:
I wanted privacy. I asked for and am paying for a unlisted phone number/service. I asked 3X and was promised that my information would be private. HOWEVER, I am getting SEVERAL calls a day from telemarketers and people I do not want to know my number.
I want my information to be private ASAP.
Is your phone number a new number or exsisting? Did you ask for unlisted when you got the number or after you received it and had it for awhile? Reason I'm asking this is because there are several possible reasons why you are getting the calls.

I have multiple devices within my family but each device receives texts, game requests and notifications meant for me. How do I stop this?

I have multiple devices among several different family members. I have one iCloud account, I guess that seems to send messages, notifications, game requests meant to me but each device receives it. How can I fix this?
jimmie57

jimmie57 wrote:
I have multiple devices among several different family members....
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l

Request and Response Scenario for JMS adapter

Hi,
I am working on IDOC-XI-JMS, JMS(sender)- XI - JMS (receiver)scenario and this is going to be real time. If any record is update in customer master then that record will be sent to JMS provider MQ series and lock the record in the legacy system and then legacy system unlock and send back a message that this has been unlocked.
This would be request response message, anyone tell me how this can be achived. I think I may have to use BPM for this kind of processing. Can anyone tell me the steps to achive the BPM for such processing.
Regards
Please reply back
Edited by: hema Mehta on May 23, 2008 2:05 AM

Hi Hema,
Reward points if this helps
Step by Step Porcess of JMS Synchronous Scenario without BPM: Correlation Settings and Transactional JMS Session
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b028f6f6-7da5-2a10-19bd-cf322cf5ae7b
How To Correlate JMS Messages
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8060448a-e56e-2910-f588-9af459e7ce21
Async/Sync Communication using JMS adapter without BPM
/people/sudheer.babu2/blog/2007/01/18/asyncsync-communication-using-jms-adapter-without-bpm-sp-19
STEPS in BPM for synchornous.
Reward points if this helps
Regards
Pragathi.

Use Sign.xml and Encrypt.xml for both request AND response within WSDL?

Hi,
ALSB: 2.6
I was wandering if it's possible to use abstract outof the box WS-Policy file within WSDL file to specify encryption
(Encrypt.xml) and digital signature(Sign.xml) with X509 for both request and response???
So far, it only works for either request or response BUT not both. i.e. within WSDL file
.....
<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                           
                         <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
           Or

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
But not both

<wsdl:binding name="DexService2Soap" type="tns:DexService2Soap">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="document" />
    <wsdl:operation name="Message">
            <soap:operation soapAction="urn:moe:dex:dexservice:2.0.0/Message" style="document" />
                          <wsdl:input>
                                    
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                                 <soap:body use="literal" />
                           </wsdl:input>
                         <wsdl:output>
                                   
                                   <wsp:Policy>
                                        <wsp:PolicyReference URI="policy:Sign.xml"/>
                                        <wsp:PolicyReference URI="policy:Encrypt.xml"/>
                                   </wsp:Policy>
                              <soap:body use="literal" />
                           </wsdl:output>
    </wsdl:operation>
</wsdl:binding>
...      Instead, I got error message like
<15/01/2008 10:15:04 AM NZDT> <Error> <ALSB Security> <BEA-387023> <An error ocurred during web service security inbound response processing [error-code: Fault
, message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fdb, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: Message]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault><faultcode>soapenv:Server</faultcode>
<faultstring>Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3</faultstring></soapenv:Fa
ult></soapenv:Body></soapenv:Envelope>
weblogic.xml.crypto.wss.WSSecurityException: Failed to get token for tokenType: http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#
X509v3
at weblogic.xml.crypto.wss.SecurityBuilderImpl.addEncryption(SecurityBuilderImpl.java:308)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processConfidentiality(SecurityPolicyDriver.java:280)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:75)
at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:86)
Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <com.bea.weblogic.kernel> <000000> <Failed to build CertPath
java.security.cert.CertPathBuilderException: [Security:090603]The certificate chain is invalid because it could not be completed. The trusted CAs did not inclu
de CN=x509,OU=x509,O=x509,L=Wellington,ST=Wellington,C=NZ.
at weblogic.security.providers.pk.WebLogicCertPathProviderRuntimeImpl$JDKCertPathBuilder.engineBuild(WebLogicCertPathProviderRuntimeImpl.java:669)
at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:194)
at com.bea.common.security.internal.legacy.service.CertPathBuilderImpl$CertPathBuilderProviderImpl.build(CertPathBuilderImpl.java:67)
at com.bea.common.security.internal.service.CertPathBuilderServiceImpl.build(CertPathBuilderServiceImpl.java:86)
at jrockit.reflect.VirtualNativeMethodInvoker.invoke(Ljava.lang.Object;[Ljava.lang.Object;)Ljava.lang.Object;(Unknown Source)
        Truncated. see log file for complete stacktrace
>
<15/01/2008 10:15:24 AM NZDT> <Error> <ALSB Security> <BEA-387022> <An error ocurred during web service security inbound request processing [error-code: Fault,
message-id: 3917705281899426819-4368b1eb.117762cff6e.-7fd8, proxy: DexServiceX509-Stub/Proxy Services/DexServiceX509-ProxyService, operation: null]
--- Error message:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Header/><soapenv:Body><soapenv:Fault xmlns:wsse="http://docs.oasis-open.or
g/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurityToken</faultcode><faultstring>Security token failed to validate. weblo
gic.xml.crypto.wss.SecurityTokenValidateResult@3c5347b[status: false][msg [
Version: V1
Subject: CN=x509, OU=x509, O=x509, L=Wellington, ST=Wellington, C=NZ
Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
Key: Sun RSA public key, 1024 bits
modulus: 13052787793731294943682394984664645854838424340012907077330623....
The 'System Error Handler' from 'Invocation Trace' in ALSB test console is something like
[pre]
$fault:
<con:fault xmlns:con="http://www.bea.com/wli/sb/context">
     <con:errorCode>BEA-386201</con:errorCode>
     <con:reason>
          A web service security fault
          occurred[{http://schemas.xmlsoap.org/soap/envelope/}Server][Failed
          to get token for tokenType:
          http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3]
     </con:reason>
     <con:details>
          <err:WebServiceSecurityFault
               xmlns:err="http://www.bea.com/wli/sb/errors">
               <err:faultcode
                    xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
                    soapenv:Server
               </err:faultcode>
               <err:faultstring>
                    Failed to get token for tokenType:
                    http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3
               </err:faultstring>
          </err:WebServiceSecurityFault>
     </con:details>
     <con:location>
          <con:path>response-pipeline</con:path>
     </con:location>
</con:fault>
So is this a feature not supported in ALSB 2.6 yet or am I missing something dead simple?
Thanks in advance
Sam

Instead of specifying policies for input and output separately you could place the policy reference only once in the operation element. Maybe will this solve your problem...
http://e-docs.bea.com/alsb/docs26/security/ws_policy.html#wp1061166

Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)

Hi
In BO 4.0 SP 9 when a administrator tries to schedule a report via CMC there is no error
But when a user schedules a report and the destination is FTP location -> Use default settings he gets following error
Destination disabled. []: [CrystalEnterprise.Ftp]. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)
There is only one Job Server and the destinations are enabled in it
There is no Job server for Crystal Reports Job Server
Do i need to create it and how.

Please check if you have proper rights to schedule to FTP. You can create a new job server, whenever you schedule it, there are multiple job servers, it will handle based on the load. But it is not mandatory, depends on the load.

How to have multi select dropdowns for web request and adobe forms

Hi All,
I am working on interactive forms for CRM 7.0 using web request and ZCI layout.
When I say web request we define the fields required for the form in CRM that becomes the context for WDA and passed onto Adobe form.
This web request is a flat structure which mean if I have a node and attributes with in that you cant have multiple values to wards this node as in WDA.
Now My query:
I have a field called "xyz" since web request is a flat structure i just defined it as a string.
In WDA I made it a enumrated field and added key value pairs to it.
In Adobe form I binded this field to a WD native enum dropdown list every thing is fine untill here.
Now in the form I need this as a multiple select, so i changed the dropdown field to list box it works.
The form has to be submitted as a draft version when did so, it will not execute any APIs but saves the data to the web request.
When the same form is opened for the next time, with the data in web request it should reopen this field with the multiple seleced values high lighted.
since the field xyz is a single filed of string, how can i maintain multiple values in that...?
if there is a form status auto save function in Adobe form this might solve a bit but not sure when the form is opened 2nd time from web reqest view does it consider it as a new one or open the same form...?
I have such dropdown fields and problems including ones with depenedt values on one another.
I tried my best to explain the problem, if somebody can help me with this its much appriciated.
Note: Since this is dependent on CRM web request I am posting the same query in that block also apologies if this mean a duplicacy.
Thanks & Regards,
Sai

I got the solution and problem is solved.
Iterating & processing a enumrated dropdown is like any other dropdown /list box in adobe forms.
Regards,
Sai Krishna

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

I have tried to change my User id which is an email address I no longer want to use. Now I am constantly getting requests from icloud and Apple ID for my password and cant get into my icloud account.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Regarding rate, sales tax and discounts for credit memo request and returns

Dear ALL,
Rate column is not displaying for credit memo request. suppose credit memo should be given due price diifererence
with referance to billing documnet credit memo request to rised. but if i want to edit rate column is not available.
how vat and discount has to be captured in case of rate diifferance for credit memo.
In case of returns will taxes applicable for returns credit memo
Gl accounts for credit memo same as billing or different GL accounts to be maintained or not
client has the scenario that if credit memo request has been rised for with referance to billing due to rate differance.
If customer returns materilas belongs to same billing. so based on the returns order returns credit memo to be rised .
But how the sap captures exact price of the materila during returns. ie; price modified during credit memo request.
Thanks & Regards
ramesh

HI,
Remove all the other condition types from the procedure and keep only those which you need.
Regards
Abhilash

WF: mail to user for purchase request and purchase order

Hi all,
I activated the WF for released of purchase request and purchase order and the system correctly send mail to the user, but not only one, seven mail for purchase request released...
Is there a possibility for sending mail only time?
Thanks!
Best regards,
Gaetano

can you please check the parameters you have maintained for the report which is used for generating the mails?
please maintain the flag --> one mail for workitem --> and let me know the system response.

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guess

I hired a commercial artist to create a color image for the cover of a self published book. I want a black and white image for the inside. The commercial artist has not responded to this request. How do I determine the format of the color image, I'm guessing it's Illustrator's formatting but I don't know. How can I find out if Illustrator will open the file and allow alterations? The image opens only in Apple's Pages software?

rons,
It seems that all you have is a raster image, presumable PNG24 or JPEG, in RGB.
It may have been created as raster artwork in Photoshop, or it may have been created as vector artwork with the help of Illy, or as a mixture of vector and raster artwork in either application, or both combined.
If you just need to have a raster representation in black and white based on the current colour image, you may try this, in a new RGB document (View>Smart Guides are your friends):
1) File>Place the image (you may tick Link or untick and have it embedded);
2) Create a rectangle with black fill (R = G = B = 0), at least as large as the image, and place it behind the image (you may ClickDrag with the Rectangle Tool between opposite corners, then Ctrl/Cmd+X+B);
3) Select all and in the Transparnecy palette flyout click Make Opacity Mask with both Clip and Invert Mask ticked.

Feature request and how-to info for EXE icons

I would like to request for future versions of LabVIEW, support for higher resolution, and higher color resolution, icons imported into the compiled application.
Currently it is possible to use an icon editor to create an icon with several images of different size and color resolution that can be imported as an independent icon in the VI application building process, by selecting the Application Settings tab and loading a custom icon. Currently however the LabVIEW application builder will only import 4 of the images into the executable. These are:
32x32, 16 color & black/white
16x16, 16 color & black/white
Windows however (newer versions anyway) will support higher resolution 48x48 true color icons, which definitely have a more realistic appearance, especially when using shrunken pictures as part or all of the icon.
As a workaround, using a resource editor these higher resolution icons may be 'hacked' into the compiled executable, but cannot be imported during the build process using a pre-constructed icon (*.ico) file. This is great if you're into doing things manually just to get the job done, but it requires time and effort for each build, and also makes it an out-of-the-question option when building applications from controlled source code. For those reasons, I would like to request this be changed in future versions of the application builder.
For those interested in icon modification, here are some freeware utilities to try:
google: "IconEdit32" -- "iedit32.zip" -- Icon editor capable of saving multiple icon variations to a file... easy to use for changing the icons of a LabVIEW app that is going to be compiled.
google: "peresourceexplorer" -- "PE Resource Explorer" -- Utility to 'hack' into an executable and modify icons so they are higher resolution and higher color resolution than LabVIEW will allow by default.
google: "Irfanview" -- Highly functional image browsing program -- good in this particular case for resizing jpgs down to icon size so they can be cut and pasted into an icon editor.

m3nth wrote:
> Is your code posted somewhere? I couldn't find it in the Code Library.
You mean the LabVIEW VI Library shell extension? No, and it won't be
posted. To many low level details are in that code I feel are either to
hackish or to work intense and revealing, that I would feel happy
posting the source code for it.
I only put the compiled dll and install script on our server a few years
ago but since LabVIEW 7.0 has now this shell extension already included
we didn't bother to get it over to our new site.
Of course you can compare LabVIEW to the Student Edition of Visual Basic
or Visual C and then the price difference looks bad. But once you start
to look into Visual Studio Universal Subscription there is
not much of a
difference, and for me C programming is a lot more work in many aspects
than LabVIEW. And Visual Studio won't even attempt to allow you to
develop on one platform and deploy for another (ok Java excluded but you
don't need Visual Studio for that).
And yes there is Borland C, Symantec C and Watcom C and even CygWin and
others, from which most are certainly cheaper than Visual Studio and
some of them even free but they also have their limitations in many ways
.. Talking about perfect user friendly and convenient operation in any of
them including Visual Studio is also not true in my experience. They all
have their strong and weak points and most rely for packaging and
installer creation on external components such as InstallShield to give
the developer the ultimate control in how the application should install.
I'll try to take a look at this when I have some more time, but don't
keep your breath just now.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Workflow and POWL integration for Travel Request / Approval

HI,
We are on EHP7 and using POWL for different kind of Approvals.
POWL is working good for Leave Approval and we have used Workflow Task ID as : TS12300097 / TS12300116, and all leave request appearing in POWL for manager and approving them.
Now we have to use POWL for Travel Request / Travel Expense approval and need to know what Task IDs I should use to configure this under SPRO.
Few tabs / links created like Travel Req Approval / Expense Approval / Claim Approval in POWL and need to show entries in respective tabs.
Thanks

HI
Is it required to run FPB_MAINTAIN_PERS_S / FPB_MAINTAIN_PERS_M to display Travel entries in POWL screen.
2) Is it required to keep entries under "Assign Task IDs to POWL Types" in SPRO ???
ex : MANAGER_MSS_INBOX MSS_POWL_LEA_APPROVAL TS12300097
I don;t see any difference in terms of functionality even If i delete above entry, may i know the necessity of having those entries ?
Thanks

Report for Support Message, Change Request and Change in one overview?

Is there a report that shows the relation between the support message, change request and the change in one overview? I am already aware of the Change Management Reporting via SOLAR_EVAL, but this does not show the whole document flow in one overview.
The incident message processors want to have a quick overview of the status of the changes that are created on the basis of the support message.
If there is no report, could you point me in the right direction... Do I have to create a query or are you using BW for service desk/charm reporting?

Hi
chk te sap note
[Note 1466131 - ChaRM Reporting: Performance of data update|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1466131]
jansi

Web Service Usage Discussion - Both for request and response.

Hi,
I have some discussion questions ( by the way i have done my search in the forums )
1) How would you solve the problem of registering user from iphone application without making the user to enter a security code to prevent spam?
( We use graphical captchas to minimize the risk in web.. but what would you do or what are you doing to make a proper registration from iphone directly to the web server? ) I can request, user, pass,email and register the user, but i can not want him to click on the confirmation code that i've sent to his/her email.. He'll leave my application, click the link,... safari will open.. etc etc...
2) How would you authenticate the user and send commands according to that session?
Would you send user and pass in plaintext, like many web pages' login system..?
And after that would you just get a session id from response and after that, would you use only that code to send new commands according to that authenticated user? like ( http://myserver.com/?cmd=message&text=hi&session_id=34524534 ) ? How would you implement, or you are implementing this in iphone application?
3)What would you use to send commands to server? You use simple url request? ( maybe somewhat REST ) or would you send xml to the server? And how would you get the response? As an XML? as comma seperated simple mode, as JSON to parse? Or would you return property list recognized by iphone? Or.... Or?? What would you use, or what are you using? What's your idea to do it in a proper way? (I know that this can change from people to people, but at least we can see what everyone is telling.. )..
What response type you prefer and why do you prefer it? For example, you are trying to avoid xml to stay away from parsing it without standard libraries... OR... ?
I'll be glad if you share your ideas/experiences with us? We may learn new things/we may improve our selves/we may change the way we do these things, we may be happy together (:

Hi MaxLeyton,
Thank you for posting in the MSDN forum.
>>I am trying create a webmethod in a webservice, this webmethod must to have two different headers, one for request and one for response.
Since it is related to the Web, to help you resolve this issue as soon as possible, you could post this issue to the ASP.NET forum.
http://forums.asp.net/28.aspx/1?WCF+ASMX+and+other+Web+Services
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Request and Reponse Pipelines for Gateway

Similar Messages

Maybe you are looking for