REQUEST for ARMv6 or lower support !!!

As there are many people using older version of andriod phone and the new Samsung Galaxy Y is being huge in countries like India, it's time to have Adobe AIR support running on it. I did by own research on friends around me who using Andriod phone and it's interesting to found that more than half of them can't ran Adobe AIR. Therefore, if we as developer choosing Adobe AIR as platform to build mobile apps even as simple as "Hello World" apps, there are a huge percentage of Android user cant run it. Which means our apps is going to losing millions or billions of potential customer because of chosing Adobe AIR.
I hope Adobe to bring AIR support on all those lower performance device (ARMv6 or lower) especially those new ARMv6 device. Btw, I have seen Samsung Galaxy Y running great on Unity games because these new ARMv6 device comes with good GPU. So, Adobe should look into it.

I thought it can not be
Flash-like technology is low performance
So adobe define high performance machince to using this framework
If your device is low performance,I suggest you can try phone gap
Now Dreamweaver can generate PhoneGap android structure and deploy apk to device directly
How about try it out?!

Similar Messages

Request for input about Forte support for the Eurocurrency

The design work for Forte support for the Euro currency is underway.
The Euro becomes legal at the start of 1999.
It is important that Forte support for the Euro currency provides
all the features that knowledgeable users will expect and require.
Please email me ([email protected]) before July 31 if you know of
features that should be supported, or if you have suggestions or
thoughts of any kind regarding supporting the Euro currency.
Thanks ..
Walt Loew
Forte Engineering
Walt Loew [email protected]
Forte Software Inc. 510.869.3428
1800 Harrison St.
Oakland CA. 94612
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jonathan,
Contact BEA sales, I believe that version 7.0 supports the seamless
replacement of security providers and that several major security vendors
have developed providers that are or will shortly be commercially available.
Alex
"Jonathan" <[email protected]> wrote in message
news:[email protected]..
First off, this may seem redundant.
Our company is looking for security products that can be used to
secure the Weblogic Application server. We are currently upgrading
from 5.1 to 7.0 and left to my own devices I would use the Security
that is built into weblogic.
However in order to do the due diligence I need to provide other
options i.e. get a product that can be configured to provide security
for the Application server. An additional nice to have feature would
be security for resources outside of Weblogic.
My primary request is for any websites that give a comparison of
such tools. but if anyone has experience using a security tool with
weblogic, it would be great to hear this. If anyone has used an
external LDAP server with Weblogic 7.0 that would be interesting also.

Request for official ethernet bonding support

Arch already has excellent support for LVM. I run two machines with LVM2. In order to make AL even more server friendly, what about adding bonding support? It shouldn't involve too much work, just an extra if block in etc/rc.d/network, an official ifenslave package, and one or two lines in rc.conf.
There is a user contribution that does it here:
http://bbs.archlinux.org/viewtopic.php?t=3082
...but it is a little unpolished and is not official.
I think this would be a useful addition (especially for people like me, who like Arch for fast servers) that wouldn't take too much time from the devteam.
Thanks for the consideration!

arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.

Request for S200/S205EXR Raw support

Adobe folks, one of your own mentioned awhile back that work was in progress for Lightroom to support the RAW files from the Fujifilm S200/S205EXR camera. This was some time ago. Will this support still come or is there a change in plans?
Thank you.

There could be technical problems. Lr needs a minimum amount of access to raw image data to work, and some vendors lock some key information away and don't provide an easy way to get at that legally.
A question worth investigating is if anyone else supports raw images form these cameras to any great extent.
[Edit]
Well, I did a little research myself, and it appears that the raw support for this camera is very vendor specific. Apparently, the sensor technology is rather unique, and most people have best success with the vendor software. Other convertors are (apparently) not all that successful at getting at and providing access to the full range of raw image data. Whether this inability is a result of vendor lock-in is unknown, but my money is on Fuji not really letting their customers have full access to the image data.
This situation is exactly why a niche company like Fuji (oh, how the mighty have fallen) should consider embracing DNG.

Request for Samsung NX10 support

I didn't see any threads on this yet so I'd like to make a request for Adobe to add support for the new Samsung NX10 RAW format in Lightroom.

I second this request. NX10 support in Lightroom 3, please.

Why Adobe dont want support for ArmV6 if there are many devices with these?

Many people use Android devices with ARMv6 like: Galaxy ace, Motorola Defy, Galaxy y, LG Optimus One, etc, ect. I think that therea are more with ARMv6 that ARMv7 check: http://forum.xda-developers.com/showthread.php?t=1596800
This link you can see the top 10 of the most common devices Android and the 3th is galaxy ace one devices with ARMv6.
http://readwrite.com/2013/02/07/8-of-the-10-top-android-devices-in-use%20-belong-to-samsun g
My Adobe friends. This is true. The big problem that have Adobe Air as framework for develop mobile Aplications is that, if you realy want that Adobe Air be truly one standard for the community, you need cover all devices, no some, otherwise Adobe Air will continue every day more in oblivion.
If we as developer choosing Adobe AIR as platform to build mobile apps even as simple as "Hello World" or bank aplications, school aplications, enterprices aplications, there are a huge percentage of Android user cant run it. Which means our apps is going to losing millions or billions of potential customer because of chosing Adobe AIR.
Another thing. Unity, Sencha, Titanium, etc, etc, etc have support to ARMv6 why Adobe don't want support these devices? - This causes only one result: the people will have to resign from adobe AIR mobile technology.
I hope that Adobe understand and bring AIR support on all those lower performance device (ARMv6) especially those new ARMv6 device.

To play devil's advocate:
* The 3rd most popular phone you mention (Galaxy Ace) was released in Feb 2011. I'd say it's falling out of that chart fast.
* Motorola Defy was released October 2010. Galaxy Y, October 2011. LG Optimus one, October 2010. If the flagship phones for the architecture are 2+ years old, it doesn't speak much for its market penetration.
* Unity doesn't support ARMv6. As far back as 2011 they announced they'd focus on v7, and whatever support v6 might have is very limited. (Source)
While I'm sure there's a place in the current market for armv6, it's something that's already legacy and it's going away fast. Not sure it makes sense to spend resources on that. "You need cover all devices" stops making sense when the effort necessary exceeds the returns. I don't see any "new" ARMv6 devices coming out either.
ARMv6 is dying or dead, depending on how you look at it. It'd make much more sense to support a platform that has new high-end devices coming out (x86).
If you as a developer absolutely need to support those old, low-end devices, using a simple framework like PhoneGap is a better solution.

Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly?

Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly? I tried the camera to read it but still no good. Get the error about it not being activated properly so i tried to log an online support ticket twice on two seperate days but get another error saying sorry we can't process this request now try later. Very frustrated, my son has a $20 voucher from Christmas he can' t use.

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of issue

Why do I get this error when running the PID Control-Single Channel.vi: "Requested value is not a supported value for this property."

Error -200077 occurred at Property Node DAQmx Timing (arg 3) in DAQmx Timing (Sample Clock).vi:1->PID Control-Single Channel.vi
Requested value is not a supported value for this property.
Property: SampQuant.SampMode
You Have Requested: Hardware Timed Single Point
You Can Select: Finite Samples, Continuous Samples
Author: Pcorcs
Attachments:
PID Control-Single Channel.vi ‏53 KB

Actually I have already tried a few things you suggested and got as far as the DAQmx Write vi. The error at the DAQmx was a buffer error indicating i needed to set it to 2 instead of the default of 1. Tried using the DAQmx Input and Output Buffer vi to change buffer, with no luck.
Attachments:
PID Control-Single Channel.vi ‏53 KB

HT201407 Dear Apple support! My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the ap

Dear Apple support!
My name is Duy Lam. Recently, one of my best friend just upgrade his phone so he gave me his old iphone 4s, white. The phone was ok, but the problem is when I upgraded it to IOS 7.0.4 it activated lock. it request for the apple id ; I had call my friend to ask about that but it's been a long time he couldn't remember the original ID that he had used. so now, could you be able to unlock the phone that i can continues to use this phone. Thank you so much, and I appreciate you all
<Personal Information Edited by Host>

All Apple support contact information is on the web site - http://www.apple.com/contact/
If your friend needs to recover his AppleID used for that iCloud account, then follow the directions here:
http://support.apple.com/kb/HT5787

HT4356 AirPrint Support in the Printer Side (Request for Official Procedure/Steps)

*I selected the iPhone community (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint
in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support
AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.

Aliel2-
The round button at the bottom of the iPad's front is your Home button. The Sleep button is on the top edge near the right corner.
Normally the Sleep button just puts the iPad to sleep but does not acgtually turn it off. If you used the "Slide to power off" arrow and turned it off, you will need to hold the Sleep button for several seconds until the Apple logo appears, in order to turn the iPad back on.
I wonder if you did the reset the right way, but just did not hold both buttons long enough for the Apple logo to appear? I just tried it on my iPad 2, and it took 17 seconds before the Apple logo appeared. It took another couple of minutes for it to restart to the "slide to unlock" screen.
Fred

AirPrint Support (Request for Official Procedure/Steps)

*I selected the iPad community as category (but this is for Apple's AirPrint Support in general)
We are currently considering to add support for AirPrint in our printer-side development.
Does anyone know how can receive official information from Apple regarding
the required procedure/steps to correctly support AirPrint in the printer side?
We are expecting that such steps would also contain details
on how our printers can become listed later on
in the following Apple page containing the official AirPrint printers:
http://support.apple.com/kb/HT4356
We understand that Apple may need to conduct
some conformance tests in order to consider
that our printer has already officially supported AirPrint,
so we may need to consider such also in our schedule.
Any information will be helpful.
Thanks!

arch is growing that fast, it is hard to keep an overview. but as long as i, as an "afternoon linux user", can get any information, it is fine with me.

HT2188 iPad 1 requested activation after being low on power. Activation does not work.

Hi
My iPad 1 requested activation after being low on power. Activation does not work so I have tried to restore it from iTunes. this progresses but after rebooting, it gets to the activation process for a few minutes and re-boots again - in a loop now. on ios6, not 7. help please?
I also looked at trying to do a manual install of firmware via iTunes but I do not know the version of firmware or how to find it out - so really stuck!
Thanks

I pulled my unit out of the dock - powered up and the display goes blank (if you look carefully you can see the bios boot screen, then black, then you can see the backlight turn off.
I plugged in the USB monitor and boom - I could log in.
Once Logged in I could see that windows still thinks it has some of the monitors from the dock, and the internal display is set to disable.
So the issue is the detection / setup of monitors in/out of the dock.
I've done about all I can do for dubugging, I hope lenovo can pick up from here. if not I'll have to call lenovo support.

2012 R2 Web Application Proxy returns 400 (Bad Request) for Kerberos IIS App

I've gone through all of the step-by-step examples for publishing applications with the Web App Proxy and I'm getting HTTP 400 when I try to publish an IIS Kerberos application. I'm using ADFS pre-authentication.
The application is SharePoint but I CAN NOT change the authentication method to claims based auth...it has to be windows integrated. I've double checked all of the SPN's and delegation. I get the 400 returned once the user has been authenticated and is forwarded
to the app url with the AUTHTOKEN?=blahblahblah query string. I've installed the ADFS certificate on the proxy and set it to be the external SSL certificate for the application.
PLEASE DONT JUST TELL ME TO POST THIS IN THE GENEVA FORUM FOR ADFS.
The event log has an exception that looks like this:
Web Application Proxy received a nonvalid edge token signature.
Error: Edge Token signature mismatch. edgeTokenHelper.ValidateTokenSignature failed: Verifying token with signature public key failed
Received token: eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IkY4NmgzYlFJbEk0NzZ5Y25HNlBHb1NSNDJ4byJ9.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.E1SqDU1Q2qh00Bt1n1UsBHJrf2kxWh8mN0j03QJTGPQ6vtrkncun017idy2BgB8NzQBVhPQAhfQb3F_lRAAWnpHjwaCuTjeL-pi1-ntVax37TQqQxqg0PVND8OpWxd7rTECObp6KnHBSkgHdaC6ntJ4WzE-QV6afUOyKQrIXil9qF_ybX8IOvMorvGllQB4enR3ZD6KMZBZwzLSl0iueKvZC8TqacRL_Kdvhn2AmutqFVw4wbZILhTsQFRSl86tEp-PCSJ_yLHcxTgqmKWVpEVC0Jo00hJe1MH7P1QMoJISdFY3-4tkuUykpgSNSSlEqZ9EwVdN--4aGE3QlqdL1vA
Details:
Transaction ID: {ee05057e-4e9b-0000-da05-05ee9b4ecf01}
Session ID: {ee05057e-4e9b-0000-d905-05ee9b4ecf01}
Published Application Name: FIM Portal
Published Application ID: 48db8de3-96e7-18b6-06d8-5cb6df999b6c
Published Application External URL:
https://portal.sosweetsosoft.com/IdentityManagement/
Published Backend URL:
https://portal.sosweetsosoft.com/IdentityManagement/
User: <Unknown>
User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko
Device ID: <Not Applicable>
Token State: Invalid
Cookie State: NotFound
Client Request URL:
https://portal.sosweetsosoft.com/identitymanagement?authToken=eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6IkY4NmgzYlFJbEk0NzZ5Y25HNlBHb1NSNDJ4byJ9.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.E1SqDU1Q2qh00Bt1n1UsBHJrf2kxWh8mN0j03QJTGPQ6vtrkncun017idy2BgB8NzQBVhPQAhfQb3F_lRAAWnpHjwaCuTjeL-pi1-ntVax37TQqQxqg0PVND8OpWxd7rTECObp6KnHBSkgHdaC6ntJ4WzE-QV6afUOyKQrIXil9qF_ybX8IOvMorvGllQB4enR3ZD6KMZBZwzLSl0iueKvZC8TqacRL_Kdvhn2AmutqFVw4wbZILhTsQFRSl86tEp-PCSJ_yLHcxTgqmKWVpEVC0Jo00hJe1MH7P1QMoJISdFY3-4tkuUykpgSNSSlEqZ9EwVdN--4aGE3QlqdL1vA&client-request-id=ee05057e-4e9b-0000-d905-05ee9b4ecf01
Backend Request URL: <Not Applicable>
Preauthentication Flow: PreAuthBrowser
Backend Server Authentication Mode:
State Machine State: Idle
Response Code to Client: <Not Applicable>
Response Message to Client: <Not Applicable>
Client Certificate Issuer: <Not Found>

Hi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

As Requested New Thread DSL low speeds and drop outs ref: Anthorny Verizon.

Please see post by Jerrold concerning the form for information requested, I have never been able to fill this out. Note also I had to sign in three times just to access your private letter to me today.
Here is a summary of problem:
When my line was first installed line speed was always between 9 to 12 Mps, which is fine for a 15 Mps line, sometimes would even go higher, so line was ok.
In October 2012 my line speed dropped to about 5 to 7 Mps, I contacted support and repairs were attemped, but did not correct the problem in fact problem became worst. My line speed dropped to about 2 to 3 Mps.
Now from October to end of November, all repairs did not correct problem. I was told by chat tech support that the problem was being worked on and there was an open ticket.
In December my line speed returned to normal speed was between 9 to about 13 Mps. No one had contacted me about this so I again contacted chat tech support who said my line had been fixed and there were no open tickets so have a nice day. I accepted this at face value and accepted that my line was now ok.
In January 2013, My line speed dropped again to 2 to 3 Mps. I contacted chat tech support who tested line and put in a repair request. No one had responded back to me and a week later my line started to drop in and out losing the connection completely. I again contacted tech support who told me they had no open tickets on my account, they tested line and while we were talking on voice connection my phone started to have heavy static, both my DSL and Phone dropped out at that point. Tech support called me back and said he was putting a repair request and that my line had problems. That night Tuesday January 29 my Phone and DSL both died, no dial tone on phone and DSL showed only power light on. Contacted tech support by a friends cell phone and informed them of this, was told ok it would be fixed by open ticket for next day.
Repair was to be made on Wednesday January 30, no one showed up, called tech support and told repair would be made on Thursday. Thursday late repair person showed up around 4:30 or 5:00pm, landlord gave access to building. I did not know they were here at all, when he told me( my landlord) I tested my DSL and found it running at 1.7 Mps or below that. When I attempted to call tech support found my phone was still dead, no dial tone at all. Contacted chat tech support who told me ticket was still open and would be fixed by Friday, or Monday.
On Monday, phone still dead, DSL running at 1.7 Mps contacted chat support who had me take a phone to the junction box outside of building, plugged in two phones to this no dial tone at junction box (both phones work ok checked using a neighbors phone jack) should note that on the outside of building there are two junction boxes, but one has lock on it so could not use that one. Anyway told that DSL could not be fixed until phone is repaired. Tried contacting phone repair and all I get is auto wait then line drops using a neighbors phone and pay phone my is dead.
Tuesday again contacted chat support now told to bad, until phone is fixed cannot help me ( was'nt that suppose to be done in first repair, fix phone and DSL given both were reported dead).
So why am I upset well look at history I now sit with No Phone service, DSL running way below what I pay for and a tech support who has said to bad not our problem. I also do not want to hear that my line does not and cannot support the speed I pay for ( it has shown to support that speed at beginning of install up to October and again in December).
Well anyway your letter did not say where to start new thread should I do that here, or in open forum?
Oh, auto phone repair has given me a date for phone service as this Friday, I hope that at least gets done I cannot contact them any other way it seems.
You may also ref: my thread on ping rates over 600 on long distants calls for any other history, but as per your request here is new thread. Please note as of today I have No Phone so can only be contacted by email or here. Untill phone is repaired that's all there is.

Please go to your profile page for the forum by clicking on your name, and look in the middle towards the bottom where you will find an area titled "My Private Support Cases".
There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Problem with Request for Permissions (mobile app)

In my application I want to publish the results of the games on facebook. I used this tutorial: http://www.adobe.com/devnet/facebook/articles/flex_fbgraph_pt1.html
Here is a fragment of my source code:
<fx:Script>
        <![CDATA[
            import com.facebook.graph.FacebookMobile;
            import mx.events.Request;
            import valueObjects.GlobalVariables;
            protected var extendedPermissions:Array = ["publish_stream","user_website","user_status","user_about_me"];
           protected function initApp():void
                FacebookMobile.init("app ID",loginHandler);
            protected function loginHandler(success:Object,fail:Object):void
                if(success){
                    currentState="loggedin";
                    nameLbl.text=success.user.name;
                    userImg.source=FacebookMobile.getImageUrl(success.uid,"small");
                    birthdayLbl.text=success.user.birthday;
                    FacebookMobile.api("/me/statuses",getStatusHandler);
                else{
                    this.login();
            protected function login():void
                FacebookMobile.login(loginHandler, stage, []);
            protected function logout():void
                FacebookMobile.logout();
                currentState="loggedout";
            protected function getStatusHandler(result:Object, fail:Object):void
                statusLbl.text=result[0].message;
            protected function submitPost():void
                FacebookMobile.api("/me/feed",submitPostHandler,{message:GlobalVariables.d.toString()}, "POST");
            protected function submitPostHandler(result:Object,fail:Object):void
                FacebookMobile.api("/me/statuses",getStatusHandler);
        ]]>
    </fx:Script>
I have problem with permissions. After login I see a white screen instead of request for permission. The desktop application does not have a problem with it. When I log for the first time to the desktop application and I will give the permissions applications, then in the mobile application everything works fine. But this is not a good solution. And so please help.

The labelField of IconItemRenderer only supports single line text. Try using the messageField instead:
<s:List width="200" height="200">
    <s:dataProvider>
        <s:ArrayList>
            <s:DataItem desc="1 Hello World Hello World Hello World" />
            <s:DataItem desc="2 Hello World Hello World Hello World" />
            <s:DataItem desc="3 Hello World Hello World Hello World" />
        </s:ArrayList>
    </s:dataProvider>
    <s:itemRenderer>
        <fx:Component>
            <s:IconItemRenderer labelField="" messageField="desc">
            </s:IconItemRenderer>
        </fx:Component>
    </s:itemRenderer>
</s:List>
If you need more control you might need to subclass, this post might help: http://flexponential.com/2011/08/21/adding-multiline-text-support-to-labelitemrenderer/

REQUEST for ARMv6 or lower support !!!

Similar Messages

Maybe you are looking for