[Request update] ipw2200 packet injection patch

hi everyone,
could someone pls write an updated version of this pkgbuild?
http://aur.archlinux.org/packages.php?ID=14082
unfortunately it does'nt compile with the new kernel + i've no idea how to fix it :>
best regards :>

well, I could try to modify the PKGBUILD. And here it is
PKGBUILD for kernel 2.6.28:
# Contributor: Manuel "ekerazha" C. (www.ekerazha.com)
pkgname=ipw2200-inject
pkgver=1.2.2.2.6.24.3
pkgrel=2
pkgdesc="An open source 802.11a/bg driver for the ipw2200 and ipw2915 with injection patch."
arch=('i686' 'x86_64')
url="http://ipw2200.sourceforge.net"
license=('GPL')
depends=('wireless_tools' 'kernel26>=2.6.24-1' 'kernel26<=2.6.29-0' 'ipw2200-fw')
install=ipw2200-inject.install
source=(ipw2200-1.2.2.2.6.24.3.tar.gz \
ipw2200_rtap_fix.patch \
http://patches.aircrack-ng.org/ipw2200-1.1.4-inject.patch)
md5sums=('7c29eb66c6117d95b093483a120f3b7b'
'31937ea17ef7ca7e2238f0055c36fb21'
'57e8e02fcefee2bef4630f40ea27baf0')
build() {
cd $startdir/src/ipw2200-$pkgver
patch -Np1 -i ../ipw2200_rtap_fix.patch || return 1
patch -Np1 -i ../ipw2200-1.1.4-inject.patch || return 1
make KVER=$(uname -r) IEEE80211_INC=/usr/src/linux-$(uname -r)/include IEEE80211_IGNORE_DUPLICATE=y || return 1
install -D -m 644 ipw2200.ko $startdir/pkg/lib/modules/$(uname -r)/kernel/drivers/net/wireless/ipw2200-inject.ko
Just copy it to an editor and save as PKGBUILD, and then replace the other PKGBUILD with this one. Good luck!
Last edited by ahcaliskan (2009-02-06 16:58:45)

Similar Messages

  • B43 packet injection

    I have bcm4311 which is supported. Looked over here here and here and I only see 2.6.26 patches, and I have 2.6.27 kernel version. Will 2.6.26 patch work or will I mess something up in the process?
    My guess it then that this:
    cd /usr/src/wireless-testing
    sudo wget http://patches.aircrack-ng.org/b43-injection-2.6.26-wl.patch
    sudo wget http://patches.aircrack-ng.org/mac80211_2.6.26-wl_frag.patch
    sudo patch -p1 < b43-injection-2.6.26-wl.patch
    sudo patch -p1 < mac80211_2.6.26-wl_frag.patch
    sudo make net/mac80211/mac80211.ko drivers/net/wireless/b43/b43.ko
    drivers/net/wireless/b43legacy/b43legacy.ko
    sudo -s
    make modules_install
    is all that needs to be done to make packet injection work or is there anything else I need to do?
    And lastly - no, I'm not trying to break into my neighbours or anyone elses network, don't really have any need for such actions. I just want to try it on my own AP to learn more..
    thank you
    Last edited by pootzko (2008-11-10 08:52:18)

    for successful injection, AP you're trying to crack has to have at least one client connected to it. and after that client makes some bandwidth, you 'steal and replicate' one of the packages it made, and with aireplay send it over and over... about 40 000 packages is enough
    just follow this steps and it should work.
    the thing I overlooked is when you start  airmon-ng start wlan0 <channel> it made another interface mon0 which you then need to use, but i think that's not the problem in your case

  • Error - While Updating Metalink Credentials for Patch Wizard in R12

    Error coming while doing : Update Metalink Credentials for Patch Wizard
    "Unable to connect to Metalink. Please enter a valid Metalink userid and password. Please also check if the Web Proxy Setup information is correct."
    We are not using Proxy Server. When i try to login to Support.oracle.com using same user it works. But throwing error using Patch Wizard. Can anyone tell me that why this error is coming ??
    Regards,
    Priyanka Pawar

    Regarding Backup as it is Application Level patch, is it fine if i take Backup of $ORACLE_HOME for Application Tier ?You will have to take a full backup (which means all the application/database tier files -- i.e. all the directories after you shutdown all the services cleanly).
    1. After that I need to 'Enable Maintenance Mode' using adadmin utility
    applmgr>$adadmin
    2. Source Env file for Application Tier
    applmgr>$ . SID_hostname.endYou mean env file.
    3. Stop all Application Services
    applmgr>$ . adstpall.sh
    4. Copy patch to Directory
    5. Unzip
    6. applmgr>$ cd /u01/patch/10629956
    7. After that apply patch using adpatch utility
    applmgr>$ adpatch
    8. Disable Maintenance Mode
    9. Start Application Tier Services
    10. Retest Correct.
    Can I follow these steps ? Yes.
    By default value of parameter "apply" is "y" so does it apply patch intest mode? I nned to specify it to "n" or should i test it first as i m doing this first time. You do not need to test it if you take a backup, and this is a small patch so you should be OK :)
    If in case anything goes wrong can I restore my Application Services back using old Oracle_Home backup ?Yes.
    Note: Please edit the post before the previous one as it contains the contents of MOS document and this violates Oracle support agreement policy.
    Thanks,
    Hussein

  • Does invoice correction request updates inventory?

    I am creating a new invoice correction document type which has a Debit Memo instead of Credit Memo (standard) subsequently, now my question if there is a correction in quantity - DOES THE INVOICE CORRECTION REQUEST UPDATES THE INVENTORY?

    Hi,
    Absolutely yes, as long as the invoice correction is related to the quantity, it must affect the stock value in SAP system.
    BR
    Tao

  • ITunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

    Tunes does not launch requests update to Quicktime 7.5.5 which already updated to 7.7

  • Solaris x86 10 u1 (01/06) Update manager showing obsolete patches

    I installed 10 u1 (01/06) the other day. I ran the Update Manager and I think there were 8 patches, so I attempted to install them.
    Only one of them successfully installed (118966-12), six of them show up in /var/sadm/spool/disallwed_patch_list_report:
    STATUS INSTALL BEGIN 119076-10
    Transition old-style patching.
    STATUS INSTALL END 119076-10 INSTALL.6
    STATUS INSTALL BEGIN 119833-02
    Transition old-style patching.
    STATUS INSTALL END 119833-02 INSTALL.6
    STATUS INSTALL BEGIN 120470-02
    Transition old-style patching.
    STATUS INSTALL END 120470-02 INSTALL.6
    STATUS INSTALL BEGIN 120082-07
    Transition old-style patching.
    STATUS INSTALL END 120082-07 INSTALL.6
    STATUS INSTALL BEGIN 120666-01
    Transition old-style patching.
    STATUS INSTALL END 120666-01 INSTALL.6
    STATUS INSTALL BEGIN 119684-02
    Transition old-style patching.
    STATUS INSTALL END 119684-02 INSTALL.6
    And the last one (120041-02) failed.
    Anyway, I was grep'ing patchadd -p for some of these and it looks like the ones I checked have been obsoleted by other patches (I didn't check them all, maybe 3).
    So, why do they still show up in Update Manager? Or am I missing something (very possible, I'm not a sysadmin, I use this machine for development).

    The same problem:
    smpatch analyze
    119076-10 SunOS 5.10_x86: ip Patch
    119833-02 SunOS 5.10_x86: gld patch
    120082-07 SunOS 5.10_x86: bge patch
    120666-01 SunOS 5.10_x86: busra patch
    119684-02 SunOS 5.10_x86: lib/svc/bin/svc.configd Patch
    120470-02 SunOS 5.10_x86: kerberos patch
    120041-02 SunOS 5.10_x86: ata patch
    patchadd -p | egrep "119076|119833|120082|120666|119684|120470|120041"
    Patch: 118844-26 Obsoletes: 117462-04 118549-01 118552-03 118847-01 118851-02 118860-01 118993-03 119206-01 119208-01 119565-01 119830-01 119859-02 120320-01 118863-01 119590-03 119720-01 118922-07 119076-12 119946-03 119952-01 120014-02 120029-02 120132-01 120363-01 118924-03 119684-02 119833-02 119948-02 119950-02 119991-01 119995-01 120067-01 120082-07 120303-01 120470-02 120666-01 119857-01 120041-02 118886-01 Requires: 113000-01 118344-05 119255-08 Incompatibles: Packages: ...
    Now look to file "patchlist.delimited" from /var/sadm/spool/cache/Database/*.zip (this file is downloaded automaticaly and used for analysis) for patch 118844:
    118844<!>20<!>SunOS 5.10_x86: kernel Patch<!>i386<!>SunOS<!>5.10<!>118344-05 <!>118851-02 118860-01 118993-03 119206-01 119208-01 119565-01 119830-01 119859-02 120320-01 118863-01 119590-03 119720-01 <!><!><!><!>BaseOS.SolarisSunIEEE1394-5.10 .... <!><!>reconfigimmediate singleuser clientroot clientusr noncontract<!><!>9361303<!>20051028<!><!>
    AND:
    there is recorded only 118844-20 and NOT 118844-26 in the "central update" database, therefore obsolete patch path is not resolved correctly (look at 8 field).
    SOLUTION:
    We must wait :-)
    M.C>

  • In psa maintence request update

    I
    HI ,
    n psa maintence request update " request not updated into data target using delta "
    In development it is showing as " request updated in target "
    can please tell me the difference
    Regards
    shekar reddy

    Hi Sriram,
    This status is shown because the delta load based on this Data source in BW system has not extracted the data from this request.
    Simply check the upward flow for your data source and execute the delta DTP or Infopackage so as to load data further in targets. Once you load data the request status will change automatically.
    Regards,
    Durgesh.

  • Com.adobe.ProcessingException: Requested update ZCI-003 could not be found.

    Hi
    Please assist with the following ADS call error as per webdynpro application dump for an adobe interactive form.
    The dump happens on drop downs and buttons on the form. The ADS is on Netweaver 7.01 EHP1. The layout on the form is ZCI but the script has not been manually inserted. The form works perfectly on the Development and QA environments but dumps in production with the error below. 
    WebDynpro Exception: ADS call failed ADS: com.adobe.ProcessingException:
    com.adobe.ProcessingException: Requested update ZCI-003 could not be
    found.(200,101).
    Kind Regards,
    Michael Mayisana.

    Hi Michael,
    Seems the ADS is working fine for non-interactive forms but the problem persists for interactive forms only.
    As per my understanding a separate license or credential file for Interactive forms is required to be configured at ADS level by your basis team.
    Check report: FP_TEST_00 and FP_TEST_IA_01.
    Report FP_TEST_IA_01 should be working fine if you want to run ADS to generate interactive forms.
    Please check with your basis team if credential is the issue.
    Regards,
    Vaibhav

  • Updating db to new Patch level

    Good Day
    Experts:
    Today I wanted to use a development db that had not yet been updated since the latest Patch Level was applied to the Server.
    All was going well until the stopwatch down at the bottom of the screen started up.  Shortly there after, the following message appeared:
    "This entry already exists in the following table "Departments" CUFD
    I also received the following message:
    "This entry already exists in the following tables " " CUPC
    A few days earlier development db's on the same Server were updated. 
    Has this happened to anyone else?  I am not sure what this is/means or how to proceed.  Any input/help is appeciated.
    Thanks,
    EJD

    i didn't update to patch 43 yet.
    quite strange that you mentioned the CUPC Table - its the Upgrade Control table.
    maybe some else tested it here ?
    regards
    David

  • Cannot charge the mac book pro after updated with Lion mountain patch.

    Yesterday , i updated to Lion mountain patch, I am not sure what the version is. But after that i dont see the laptop is getting charged.My battery completely drained off. I dont know how to resolve this issue.But i am not sure because of the "update" only it happened.Is there any way to charge up the lap ?
    any help is much appreciated. Thanks..

    I just plugged in the charger after 10 hours. Now , eveything looks good.
    Mysteryyy!!! Woohoo!

  • ISupport - Service Request Update page Progress section

    Hi folks,
    iSupport 11.5.10.2
    On iSupport's Service Request Update page (IBU_CF_SR_190_G), is there any way in the Progress section to display only certain kinds of information? For example, right now, Progress section displays Notes, Status Changes, Severity Changes etc. Is there a way to display, say, only Notes?
    Kind Regards.

    Steps to do the configuration:
    1.Login to EBS
    2.Select the Application Developer Common Modules Responsibility.
    3.Selct the Region Function.
    4.Query for IBU_CF_SR_DTL_PROGRESS_TABLE region.
    5. Using this region you should be able to enable only Notes to show up in the progress region.

  • Wifi packet injection?

    I was wondering if the new late 2011 MBA had packet injection ability on it's wifi device. 
    Does anyone know if the wifi driver with Lion allows this? 
    I was thinking of buying a MBA 11 inch for on the go surfing and work related solutions.

    Perhaps the Nexus has a better antenna or the way you held it could have maintained a better line of sight to the wifi accesspoint? Wifi is 'polarized' so you can sometimes get better (or worse) reception by rotating the antenna through 90º.
    It's also possible that the router was too busy when you tried the Mac & iPhone but then was less busy when you tried the Nexus.
    Interference could be another reason (portable phones, microwaves, other radio transmitting devices can potentially interfere).
    Being too close to an accesspoint (or another transmitting client) can also cause trouble.
    Wifi networks can also be configured to 'channel hop' to try to get better signal to noise ratio, this means you may have used different channels on the different devices and may not be comparing like to like. It could also have been another neighboring accesspoint that decided to move away from that channel that helped the Nexus speed up.
    It's tough to say, the only real way to test accurately is to have control of the accesspoint so you can control how many clients are connected.
    For what it's worth there are a few wifi graphing apps on Android that can indicate how many other networks are around you… (there are also free ones IIRC).
    https://play.google.com/store/apps/details?id=com.metageek.inSSIDer&hl=en
    I'd disable wifi on the other devices and try one device at a time & move around to see if one part of the room has better reception.

  • Request update PyQT to 4.4.4

    I don't know whether this is the correct place to request update of PyQT to 4.4.4.
    Tried to build my own PyQT due to synce-kpm issue.
    Looks like the download URL in PKGBUILD is outdated. PyQT has been upgraded to 4.4.4.
    To the developer/TU who is building this package. Please install dbus-python before building PyQT 4.4.4 so that
    /usr/lib/python2.6/site-packages/dbus/mainloop/qt.so is generated so that synce-kpm can work correctly.
    The makefile generate some error listed below.
    install: cannot create regular file `/usr/lib/qt/plugins/designer/libpythonplugin.so': Permission denied
    make[1]: [install_target] Error 1 (ignored)
    strip --strip-unneeded "/usr/lib/qt/plugins/designer/libpythonplugin.so"
    strip: '/usr/lib/qt/plugins/designer/libpythonplugin.so': No such file
    make[1]: [install_target] Error 1 (ignored)
    cp -f -r /home/xxxx/WIP/pyqt/src/PyQt-x11-gpl-4.4.4/designer/python /usr/lib/qt/plugins/designer/
    cp: cannot create directory `/usr/lib/qt/plugins/designer/python': Permission denied
    I don't know whether the error has any impact on my pc.

    I'm pretty sure there is a bug report about the dbus-python thing and the package is flagged out of date so it should get updated soon.  If not, a polite email to the maintainer might help you.
    The make errors look like there files are ingnoring the install prefix for some reason.

  • Check for update not working for Patch 2???

    I am running 1.0.0.14.67. When I run the Check For Update command it says there are no updates available even though Patch 2 is now on the OTN site. Is there anything I can try other than downloading the whole new zip and migrating my install?
    Previously I have successfully used the update centre to install new patches for the various extensions, so I don't think it's a problem with my firewall settings.
    Cheers, APC

    Ok - one other thing. If you run check for updates, then the front "Help > About " will not change. So this will still show 1.0.0.14.67, but the Extensions tab will change. Can you just confirm that? Check out the screen shot in this FAQ. So the various extensions will show the 15.57 updates if patch 2 is already installed.
    As far as I'm aware we do not have the patch set available as a separate bundle. I'll have to wake to for Kris to get in (west coast) before we can check that.
    Sue

  • Updating ST-PI to patch level 8

    Hi,
    We have the solutions tools plugin 2005_1_46c installed on one of our systems at patch level 2.Now we want it to be updated to the latest patch level ie., 8.So can we directly apply the latest patch level or do we need to apply all the patches in a sequential manner.
    Regards
    Balaji

    Patches need to be applied in sequence.  As mentioned before always read the prerequisites and the Note related to the patch to be applied.
    Regards
    Juan

Maybe you are looking for

  • Major crashes even after clean install.  iCal/sqlite/MobileMe the culprit?

    In 25 years of using Apple computers, I've never had problems like I'm having now. My iMac was acting up severely with some strange symptoms such as: * The red & white portion of the iCal icon in the dock disappearing, while the date itself remained

  • A 2nd monitor.

    I have an iMac(24") and wish to connect a 2nd monitor.... have had this kind of setup at jobs and find it very useful. Is this possible, and I'm considering a 24" Apple monitor. Appears to have 3 cables to hook up and I'm running out of USB connectio

  • Multiple database Instance on single server

    Hi friends, I want to install Solution manager in the same system which I have installed ECC6. So I want to install another database(10g). Can any one tell me the possibities to install it. regards, Nageshwar

  • Ipod nano 4th gen stuck on apple logo even after restore

    okay, i have an ipod nano 4th gen. it gets stuck on the boot logo, (apple logo) every time it tries to restart. i have rebooted, gone into the diagnostics, put it into disk mode, and even restored from there. the computer doesnt recognize the ipod un

  • Help..I cannot get past 2 out of 8 while synching

    help, cannot get the full synching to take place  any thoughts?