Requests (No vendor assigned ) problem

Hi all,
we are trying SRM 5.0 standalone scenario
we were successful at configuring Self-Service Procurement, all our shopping carts take the right way from it's forming till getting invoice.
Now we try the Requests menu. We go to Requests. We fill all fields with product id and others. then i open Assign Vendors/Service Agents window, and i can't see and choose any vendors. there is a message:
"No vendor assigned 
   The request cannot be made because there are no vendors that can be assigned" 
Why it is so? Why it is impossible to choose any vendors, and in shopping carts all is OK?
will award points for helpful answers

Hi,
I have exactly the same problem. From which transaction I can create a vendor list?
I have tried with BPH but I can not see the vendor list.
Cheers,
Elo

Similar Messages

  • Catalog Problem - Automatic vendor assignment problem...

    Hello All
    One of the procurement catalog (Green flow Items) was corrupted by uploading a supplier catalog Schema. We got this corrected by once again uploading the correct schema to this catalog and mapping it to the master catalog. There after the corrupted schema is published.
    After this when the users are creating the shopping carts with the items in this recovered catalog, 'Automatic Vendor Assignment' facility is not working . All these shopping carts are being directed to the Professional Purchaser, even though they are Green route shopping cart
    Due to the 'Automatic Vendor Assignment' failure; if the requisitioner manual enters then Vendors details when creating the Cart then the Vendor Details will appear in the Professional Purchasers In-Box.
    Alternatively; the Vendor Details will not appear.
    Did I miss any thing while correcting the the Procurement cataloge.
    Any help or guidance on this is very much appreciated.
    Thank you in advance.
    Wishes & Regards,
    Mahesh. J

    Hi,
    Please check returned OCI value from Catalog. Did you get correct business partner ?
    [https://service.sap.com/sap/support/notes/395312|https://service.sap.com/sap/support/notes/395312]
    Implement the Note 487917 and check the log in SLG1 transaction.
    Regards,
    Masa

  • No vendor assigned for Service Procurement

    Hi all,
    While creating request for External Staff, i am unable to assign vendors for the request.
    I created service in COMMPR01 and created contract with vendor, but i am unable to see the vendor while creating request and no F4 help to assign vendors.
    did any one faced with similar problem.
    Please help me in this.
    Regards,
    Ravi

    Hi
    Which SRM version are you using ? What is the detailed issue ?
    <b>Anyways, Please go through the following links, which will help  -></b>
    Service Agent - Request
    Easy : vendor user ID request on logon screen
    Determine to what "Vendor List" a vendor is assigned.
    'no vendor assigned' on some lines of cart
    <u>For using Product Cat.\Vendor\Contract hierarchy activate follwing before any data replication in SRM.</u>
    <u>SPRO Path</u>
    <b>SPRO->SRM Server->Cross. App.->Activate Hierarchies for Product Categories, Vendors, and Contract .</b>
    Regards
    - Atul

  • 'no vendor assigned' on some lines of cart

    I support a client who uses EBP v 4.0 (SRM 3.0.)
    They have a problem I am looking at, where a user creates a cart of multiple lines, typically an annual purchase order to cover monthly charges. These lines are all for the same vendor and all using the same product, yet sometimes (and I can't work out why this happens) one or several of the lines will be created with 'no vendor assigned', which generates a Purchase Requisition in backend R/3 and obviously requires manual intervention by the Central Purchasing Team.
    Yet the other lines on the cart create a PO automatically in R/3 straight after approval.
    The client does not want to have 2 different SAP PO numbers, as they are supposed to be giving one PO number to their supplier to cover an entire period.
    I've looked for OSS notes & through the forum, and can't find anything.
    Can anyone help please?
    Regards

    Hi Vikki,
    The firsty thing to do is to find a way of reproducing trhe error on your development or quality environment, and open a ticket on OSS.
    The problem may also come from the way the users create the SC (catalog, manually or product master).
    A workaround may be to add a control in the BBP_DOC_CHEK BADI in order to get an error message on SCs items without source of supply.
    Regards.
    Vadim

  • FM/BAPI for creating the credit memo request for Vendor

    Hi Experts,
        I need an RFC/BAPI,  for creating the credit memo request for Vendor.
    Thanks in Advance,
    Kiruba.R

    Hi,
    Use this BAPI 'BAPI_DRMCREDITMEMOREQ_CREATE' - Credit Memo Request Creation
    Regards,
    Jyothi CH.

  • Which number range is used for down payment requests for vendors?

    Hi,
    Which number range is usually used for down payment requests for vendors?
    I would like to use it for:
    Y002 vendors (emplyees)
    Y004 vendors (1-time vendors)
    Y005 vendors (confidential vendors)
    The invoice will be posted via FI via Tcode FB60, FB65 & FB10 and F-02.
    Thank you for your feedback.
    Kind regards,
    Linda

    Hi
    For down payment request the Document type is KA hence the number range which is applicable to KA is applicable for vendor downpament also.
    In your case the number range is based on document types and not related to vendor types.
    Thanks
    Srinivas

  • Send SRM Purchase order Cancellation request to Vendor using SAP PI

    Hi gurus,
    We have to build an interface to send Purchase order cancellation request to vendor once the PO is deleted in SRM using PI.
    Could some one please send me out a document to set up this interface.
    Thanks in advance for your help.
    Regards,
    Catherine

    Hi Catherine,
    did you get any chance to go through the below links.
    Purchase Order from SRM to SUS ( Supplier Self Service )
    PO from SRM to supplier via PI 7.1 | SCN
    Thanks,
    Naveen

  • How to configure an automatic vendor assignment for a purchase requisition

    hi guys,
    how to configure an automatic vendor assignment for a purchase requisition in sap
    Thanks in advance

    hi Swathi,
    Check these Links out
    http://help.sap.com/saphelp_erp2005/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5e/372e3b7532394ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/4d/2b912a43ad11d189410000e829fbbd/frameset.htm
    Regards,
    Santosh

  • Picking request Number Range Assignment

    I am looking for picking request number range assignment? 
    In Logistics execution we can define the number range, for pciking request but where to assign it?            
    I request all the SD Guru's to have a look. I find it pretty challenging.
    Please reply to the subject asked.
    Best Regards,
    Bashir
    Edited by: Bashir on Jan 12, 2010 11:18 AM

    Dear Friend
    I feel the picking request number is automatically generated by the system ( If it is not a transfer order that is not warehouse managed )
    The logic is system takes the picking date
    Today if we pick that is 12.01.2010
    The picking number is 20100112 (yyyy/mm/dd)
    No matter how many delivery documents we create today the picking number will be 20100112
    If the picking date is 11.01.2010 then
    picking number is 20100111 (yyyy/mm/dd)
    If the picking date is 21.12.2009 then
    picking number is 20091221 (yyyy/mm/dd)
    Regards
    Raja

  • Table name to fetch data about vendors assigned to a class?

    Which table to be used, While creating a query (SQ01/02) to fetch details regarding vendors assigned to a particular class in R/3.?
    The business requirement outline is,
    Which all vendor are assigned to a particular class but no condition record maintained for them.
    Thanking You,
    Vivek

    The simplest way would be to have two queries and UNION them together. For example:
    WITH test_data AS
    ( SELECT 0 AS id, 'sam' AS customer_name, 'aus' AS country FROM DUAL UNION ALL
      SELECT 1 AS id, 'peter' AS customer_name, 'ind' AS country FROM DUAL UNION ALL
      SELECT 1 AS id, 'peter' AS customer_name, 'ind' AS country FROM DUAL UNION ALL
      SELECT 0 AS id, 'samy' AS customer_name, 'us' AS country FROM DUAL UNION ALL
      SELECT 0 AS id, 'rayan' AS customer_name, 'nz' AS country FROM DUAL
    SELECT cnt
         , customer_name
         , country
    FROM   ( SELECT id
                  , customer_name
                  , country
                  , COUNT(*) OVER (PARTITION BY id) AS cnt
                  , ROW_NUMBER() OVER (PARTITION BY id ORDER BY id) rn
             FROM   test_data
             WHERE  id != 0
    WHERE  rn = 1    
    UNION
    SELECT id
         , customer_name
         , country
    FROM   test_data
    WHERE  id = 0
    This gives the following results:
           CNT CUSTO COU
             0 rayan nz
             0 sam   aus
             0 samy  us
             2 peter ind

  • TS2776 An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

    An error message keeps appearing when I have I tunes open, saying could not complete request. Any similar problems or ideas to resolve?

    Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

  • Down payment problems Customer/Vendor - Assign default cost elements

    Helo Gurus,
    ive tried to execute TC: F-29 Customer and F-48 Vendor down payments.
    I enter all the data needed and additionaly Internal Order.
    Then i get a message saying:
    Maintain default revenue element in controlling area 5000
    Message no. FI661
    Diagnosis
    CO down payment update is active in controlling area 5000.  You must therefore maintain a default cost element and a default revenue element for down payments.
    Procedure
    Maintain the default cost elements for down payments for controlling area 5000 in the Project System implementation guide.
    The maintenance is done in TC: OKEP (project system)
    I created two revenue Cost elements and tried to assign them there, but it says CE are nore primary CE.
    I changed it from revenue to primary, then it says that CE isnt revenue...
    weird stuff
    What could be the problem?
    Regards
    Laurynas

    Hi,
    Please refer to SAP Note 388843.
    Regards,
    Srinu

  • Clearing Vendor : Header data - Posting with assignment problem

    Hi,
    I would like to write a program or if possible would like to use a BAPI  to post Clearing vendor data in t-code F-44 with assignment option.
    I looked at to bapi BAPI_ACC_INVOICE_RECEIPT_POST and BAPI_ACC_DOCUMENT_POST, but both of them needs tax key and in F-44 we do not use it. as an other example we'd like to clear it with the acc. document and  Line Item of acc. doc .(BSEG-BUZEI) 
    Is there any idea about how to do this?
    Kind Regards.

    Hi,
    my suggested method :
    1) works
    2) is very simple
    sample:
    * 0 initialization
      xbkpf = bbkpf.
    *1 header - fill xbkpf
      MOVE: 'FB05' TO xbkpf-tcode.
      MOVE itab-bukrs TO xbkpf-bukrs.
      MOVE '90'  TO xbkpf-blart.
      CONCATENATE sy-datum+6(2) sy-datum+4(2) sy-datum(4)
                  INTO xbkpf-bldat.
      CONCATENATE sy-datum+6(2) sy-datum+4(2) sy-datum(4)
                  INTO xbkpf-budat.
      MOVE itab-waers TO xbkpf-waers.
      xbkpf-auglv = 'UMBUCHNG'.
      TRANSFER xbkpf TO file.
    *2 fill bselk
      xselk = bselk.
      xselk-agkon = itab-lifnr.
      xselk-agbuk = itab-bukrs.
      xselk-agkoa = 'K'.
      xselk-xnops = 'X'.
      TRANSFER xselk TO file_si.
    *3 fill bselp (clearing criterion)
        xselp = bselp.
        xselp-feldn_1 = 'SGTXT'.
        MOVE  itab-sgtxt TO xselp-slvon_1.
        TRANSFER xselp TO file_si.
    regards Andreas

  • Ageing(Customer and Vendor) report problem

    Dear Experts,
    Firstly, Glad to be before you.
    Here, we have developed ageing report for Customers and Vendors. In which the Partial payment line item (let us say A) against an Invoice (lets say X) is not being shown under the same age of Invoice Line Item.
    For example:
    Scenario 1)
    Let me say that the Payment Terms 'Z001' under which the line Items fall due only after 30 days.
    I have posted an invoice on 01.09.2011 with Rs. 20000
    If we run the Ageing as on 16.12.2011, the output is projected as follows:
    ============================================Days in Arrears
    0-20--20-4040-60--
    60-80
    Line Item X (Invoice)----
    20000
    Total Balance agewise:--000--
    20000
    Here for Invoice NO PROBLEM is being raised, as the Invoice Posting Date is taken as the Baseline Date from which the Ageing will be calculated based on Payment terms assigned to Customer in the master data.
    But the Problem is when we do partial payment:
    Scenario 2)
    Let me Take the same example:
    Let me say that the Payment Terms 'Z001' under which the line Items fall due only after 30 days.
    I have posted an invoice on 01.09.2011 with Rs. 20000 (Due by 77 days as on 16.12.2011)
    We have received payment of 8000 against the invoice, on 22.09.2011 (due by 55 days as on 16.12.2011)
    now the Ageing report is ran on same 16.12.2011, for which the output is as follows:
    ============================================Days in Arrears
    0-20--20-4040-60--
    60-80
    Line Item X (Invoice) -
    20000
    Line Item Y (Partial Payment)----
    (8000)
    Total Balance agewise:--00(8000)--
    20000
    As per Technical logic whats happening is correct. Because the Base Line date of the partial payment line Item is being picked from the posting date of the same. BUT NOW, THE REQUIREMENT IS AS FOLLOW:
    The wants to see the related Partial payment items also in the same AGE in the report. i.e., we should make the system pick the Baseline date of the partial payment line item(Y) from the posting date(01.09.2011) of the other line item(X) i.e., from the Invoice(X) which is being partial cleared. Can you please suggest me a logic?
    Ramana.Gottipati

    Hai Srinivas
    Thank you so much for your kind reply.
    We first suggested the client to enter baseline date manually, for which they requested to find some automation. Could you please kindly suggest some logic for changing the Baseline date of partial payment line item to the baseline date of its respective invoice item.
    Ramana.Gottipati

  • Cost Assignment problem in ESS- WD ABAP (BP1.2)

    We have just upgraded to WD ABAP, BP1.2 in ESS. But I am facing a problem in Cost Assignmnet
    I tried creating a travel request in ESS with percentage break up in Cost Assignment. After that when I go to the 'Review' Screen and do 'Display Request Formu2019, I can see that break up. Now I do u2018Save and Save for Approvalu2019. Here as I do u2018Display Request Formu2019 again, I can see that cost assignment changes back to 100% to the master cost centre.
    Can anyone tell how to resolve?

    Your portal and webdynpro abap are running in two different servers. Your abap iView has to get content from application server abap. In short every request from Portal has  to be authenticated either by user mapping or SSO and any other authentication (whatever it may be ).
    Also when I am trying to enter correct  R/3 user ID and correct password, it is not taking that also. Same R/3 login screen is coming again and again
    This you need to investigate, it is possible you go to different system/Client where in your user id is not authorized .

Maybe you are looking for