Send SRM Purchase order Cancellation request to Vendor using SAP PI

Hi gurus,
We have to build an interface to send Purchase order cancellation request to vendor once the PO is deleted in SRM using PI.
Could some one please send me out a document to set up this interface.
Thanks in advance for your help.
Regards,
Catherine

Hi Catherine,
did you get any chance to go through the below links.
Purchase Order from SRM to SUS ( Supplier Self Service )
PO from SRM to supplier via PI 7.1 | SCN
Thanks,
Naveen

Similar Messages

Vendor field on SRM Purchase Order

Hi.
Please can someone elaborate and explain why my preferred supplier that I have entered onto my Cart does not copy through to the Vendor field on SRM Purchase Order please? At this moment, the Preferred Vendor field is incorrectly populated whereas previously, only the Vendor field was populated. We have the ECS activated.
Thank you.
Pooja!

Hi
Prefered vendor - if you manually added a vendor - This partner function no. 39.
check your BBP_PD whether you have prefered vendor or fixed vendor in partner head.
Fixed vendor -partner function is 19 like contract ...etc
check these details or your approver might be changed your source of supply if he has access to modify the cart.
BR
Muthu

Sending purchase order by email to vendor

hi
what conf steps required for sending purchase order by email to vendor and internal users?
rgds
sara

In Vendor Master mention the email id of the vendor and in PO in Item detail tab in delivery address maintain the email id for the respective internal user.
Also configure message determination schema for the PO.
Regards
Ankur

Send the purchase order to several email addresses.

Hi, everybody
we are in a clasic scenary. SRM 4.0.
does anybody know how I can send the purchase order (output is configured like automatic output by email) to several email addresses.
Any idea.
Jorge

Has anybody tried to do a bespoke development in order to send the purchase order e-mail to more than one address.
Alternatively can the PDF file be sent to a central folder or something like that.
Any advice would be greatfully received.
Thank you
Karen

SRM Purchase order form?

Hi
SRM Purchase order form
As we are implimenting SRM 7.0 for of the project,We have one of the scenario called :SRM Purchase order form
So we need to find the actual content of the Po from.?
Can any one can give the Actual content of the PO form ?

Hi Rameshwar,
PO form is something you need to discuss with Business, they will be able to provide you the data which you need to input in the form.
Generally below things are mentioned in PO form.
- PO Number
- Vendor Name & Address
- Delivery Address
- Invoice address
- Terms of Payment/Delivery
- Contact Person Name & Telephone or email
- Company Logo
- Item, Item descirption (material no if you have), quantity, Unit of measurement, net price, tax, total price, currency.
- General remark like disclaimer....etc...
Best Regards,
Anil

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Modify the output medium log for SRM Purchase order

Hi, I'm using a FM BBP_ECS_PO_OUT_BADI to modify the output medium of the SRM purchase order. Though it is displaying it in the header level output medium ( radio buttons )
the document output log holds the old value. Is there a way to modify/update the output log to hold the changed output medium?

Prasanna,
Is this to block the PO's being sent to vendors temporarily? We had similar requirement and we were able to do it by updating table BBPD_PO_METAOUT. SAP Note 659386 has more information on it.
Regards,
Suren

Need to send EDI Purchase Order only once

Hello,
We are using EDI to send electronic Purchase Orders to Vendors. Is there a way to tell the system that I only want to send the EDI document once?
We are having issues when Purchasers reprocess the order resulting in the Vendor recieving an EDI Purchase Order more than once. I want to tell our Purchasing dept that the EDI order will only go once, when they release the PO and that if they need to resend they will need to follow a manual process (FAX or email).
Thank you.

Hi Dan,
One possibility which immediately comes to mind is using the user exit: ZXM06U02.
This exit is trigerred while sending the EDI from PO. You can place a logic in here, to show an error if there is already a IDOC sent for that PO.
We are using this exit for doing some other custom check.
I hope this helps.
Kind Regards,
Prakash

BBP_PDIGP-GROSS_PRICE zero in SRM purchase order

Hello All,
We are using extended classic scenarion SRM 5.0 (Server 5.5) with backend ECC 6.0
When creating a shopping cart for product (NOT direct material) on account assignment F = Order with a quantity smaller 1 the SRM purchase order hasn't got a gross price and net value in the item basic tab but has got the correct prices in the 'Prices' tab.
As there is no price in the basic tab (BBP_PDIGP-GROSS_PRICE = 0) the generated SRM purchase order is in status 'Held'.
This happens only if the quantity is less than 1. The SC has got a price maintained (from info record).
Any ideas out there?
Thanks,
Franz

Franz,
To release the PO the user has to uncheck the Invoice expected indicator in the Follow on documents tab for the item with zero price. Also they should uncheck the GR indicator or they could input a confirmation for the zero priced item and this can lead to further complications.
Hope this helps
Allen B.

Email Sending of Purchase Order Created versus Print Output

Dear All,
I have been successful in sending the Purchase Order created as a PDF Attachment in email.
The problem i am facing is in the formatting of the attached output.
The attachment has different bold characters as compared to the print output of the PO , though both the outputs are using the same sapscript.
I am not able to find the reason for the difference.
Only because of this reason, my delivery is on hold.
Please guide me on how to find where the difference could be and how to rectify it.
Thanks & Regards,
Bhavika

Could you tell us which fonts you tried?
What device type did you choose? (SPAD transaction, select your output device to determine the device type)
Could you upload TrueType fonts (one normal, one bold) with RSTXPDF2 program (do not tick "do not embed font in PDF" option so that the font is embedded in the PDF file)?
Did you make sure that your font is not converted to another one? (SE73, printer font, choose your device type, click conversion button, and check what is the converted font)

Setting for Sending the purchase order via EDI

Hi,
I have no knowledge on the Sending the Purchase Order via EDI.
What is the setting that need to do in MM side?
Anyone has any idea?

Hello Janice,
Please refer the below LINKs which would provide you clear approach for configurational task of sending PO through EDI.
[LINK|http://help.sap.com/saphelp_46c/helpdata/en/dc/6b7c9f43d711d1893e0000e8323c4f/frameset.htm]
[LINK 2|http://www.erpgenie.com/sapgenie/docs/advanced_guide_to_edi_configuration.doc]
Regards,
SARTHAK

Auto Purchase Order Cancellation

Dear Experts,
If it is possible of Auto Purchase Order Cancellation after a decided date?
I tried it with Purcahse Order> Accounting Tab > Cancellation Date.
My posting date of P.O. was 13-01-2012 and Cancellation Date was 14-01-2012.
But P.O. has not been cancel yet.
if there is any other workaround then plz suggest or I am missing something in procedure.
Thanks in Advance.
Regards,
Ravi

Hi,
I m losing hope now.
Can u plz tell me about that cancellation date option why it is not working and how that guy said that this is working on his system.?
I cannot undersand why?
And also i checked the second way as you suggested to select open Purchase Order in Open Item List. But you can close one P.O. at one time not multiple by selection.
Regards,
Ravi

CHANGE THE OUTPUT MEDIUM FOR SRM PURCHASE ORDERS

We are using SRM 5.0
I tried to change the SRM purchase order's output
medium from 'XML' to 'Print' using a function module
'BBP_OUTPUT_PO_PARAMS_SET' within the BADI 'BBP_ECS_PO_OUT_BADI'. Though it changes the
output medium and chooses the right radio button
at the UI interface level (i.e)
Purchase order Header->output->
radio buttons(print,email,fax,xml)
It still holds the output medium as 'XML' at the
Document output log and process the document as 'XML'.
Is there a way to update the output log to hold the changed medium i.e (print)
Thanks and Regards,
Gia

Hi,
Have a look at the foll thread for more pointers;
Re: Change medium of output for Changed PO in SRM
BR,
Disha.
Do reward points for useful answers.

Tcode for Purchase Order Cancellation?

Tell me the tcode for purchase order cancellation and in which tcode to view the cancelled POs.?

hi vinaya,
Use T-Code Me 22N for Cancellation of PO
=> Select the document to be cancelled by clicking the icon other PO.
=> Select the item to be cancelled in the item overview.
=> Click the cancel icon on the screen(dustbin icon) .
=> Save the PO again. The item will continue to appear in the screen but with a dustbin icon attached. No document can be posted referring this PO / line item.
Regards,
Naveen

HT204088 Coin purchases have been.Card approved once was.However, no coin.Purchase history.Cancellation request is approved.

Coin purchases have been.Card approved once was.However, no coin.Purchase history.Cancellation request is approved.

Approved five times.Coin NoApproved request to cancel

Send SRM Purchase order Cancellation request to Vendor using SAP PI

Similar Messages

Maybe you are looking for