Required information on Batch status updatings.

Hi,
I want to change batch status after creating the outbound delivery through inbound idoc, i was able to create delivery , but after creation, i should update the batch status using function module BAPI_BATCH_SAVE_REPLICA, but i was unable to execute this function module correctly,
Can any one provide details like what are minimum things that are required to update the batch status using this function module.
In my system batches are defined at plant level.
Please let me know the solution if any one knows this.
With regards.
P.Prasanth.

Hi 
By design scom object monitoring health state is aggregated as Availability, Configuration, Performance, Security and this is nothing to do with monitoring alerts.
you can place unit monitor under any of the above.refer below link for more information 
http://technet.microsoft.com/en-us/library/hh457599.aspx
http://technet.microsoft.com/en-us/library/dd440880.aspx
if any monitor under Availability, Configuration, Performance, Security is Unmonitor indicated the monitor is not initialized and Availability, Configuration, Performance, Security will show unmonitor if there are no unit monitor under it.
Regards
sridhar v

Similar Messages

  • Itunes download gets stuck at:- Gathering Required Information, Status: Performing Installation Checks

    My Itunes was not working so I deleted it and now cannot download a new version. The download gets stuck at  Gathering Required Information, Status: Performing Installation Checks. I am trying to download 10.4 for windows. I have been trying to download this again for about a week and have deleted all apple products from my  Control Panel and temp folders. Any advice?
    Cheers
    Jo

    Deleting the .itl and rebuilding it will lose date added information. Playlists may be recovered if the .xml file is imported. A better way might have been to temporarily rename the .itl while iTunes is installed, then restore the original .itl after the fact.
    For general advice on problems installing iTunes see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • MHKIM:(AP) Payment Batch의 status중 Overflow에 대해서

    QUESTION
    =========
    payment batch를 생성할때,
    status - overfolw가 왜 나타나는지 확인할수 있을까요?
    (APP-SQLAP-10049)
    ANSWER
    ========
    APP-SQLAP-10049 error는 Payment Batch처리시에 대상 invoice가 없으므로,
    View Invoice를 눌러도 data가 보이지 않을 것이라는 것입니다.
    그렇기 때문에, 해당 Payment Batch를 Confirm하게되면, 자동으로 void될 것이라는 내용입니다.
    Overflow status는 대상 invoice가 없을 경우 입력되는 값입니다.
    AP User Guide (5-101) 자료를 보내드립니다.
    * Overflow
    Complete remittance information, (for example, a list
    of the invoices paid), did not fit on the actual payment document,
    and Payables used an overflow payment document to record the
    additional remittance information. You send to the supplier only
    the remittance portion of this payment document with any other
    remittance stubs and the payment. Overflow payment
    documents are void.
    Preliminary register report를 출력해보시면,
    Payment Batch에 대한 대상 invoice는 나타나지 않을 것입니다.
    Confirm작업을 하면, 자동 Void되므로,
    새로운 조건으로 Payment Batch를 입력해주시기 바랍니다.

  • Batch status updating using function module BAPI_BATCH_SAVE_REPLICA

    Hi,
    I want to change batch status after creating the outbound delivery through inbound idoc, i was able to create delivery , but after creation, i should update the batch status using function module BAPI_BATCH_SAVE_REPLICA, but i was unable to execute this function module correctly,
    Can any one provide details like what are minimum things that are required to update the batch status using this function module.
    In my system batches are defined at plant level.
    Please let me know the solution if any one knows this.
    With regards.
    P.Prasanth.

    Look at BAPI_INCOMINGINVOICE_POST
    Rob

  • Itunes 10.5.1 not installing hung at gathering required information

    I seem to have a problem installing itunes on a new Windows XP Pro computer. Itunes starts the setup then gets hung at the screen  gathering required information and status performing installation checks.
    Any idea's on how to get itunes installed on this computer?
    Thanks

    Hi,
    I have exactly the same problem and I have Windows XP. Did you manage to find a way of installing itunes in the end? I've uninstalled itunes completely as recommeneded by Apple but still have the same problem!

  • Cancelamento de NF-e parado (batch status 05, process status 02)

    Bom dia pessoal,
    Ontem tivemos um problema no GRC/PI de um cliente, onde por alguma razão o certificado estava sendo rejeitado. Depois de vários problemas causados por isso, foi resetado o j2ee e o sistema voltou a operar normalmente.
    As sequelas disso foram duas notas para as quais foi solicitado o cancelamento, agora elas estão com status de processamento 02 (Sent to Signature Service) e batch status 05 (Result Received).
    Seguindo uma orientação para um caso parecido (),
    peguei os MsgIDs das mensagens dessas NFs na /xnfe/acknowledg (ambas com SIGNC), encontrei-as no SXI_MONITOR do PI, onde elas são listadas 2x cada, com os seguintes status
    1 - Status = Transfer to Process Engine (, Ack. Status = branco
    2 - Status = Processed Successfully, Ack. Status = Still awaiting acknowledgment (bola verde com interrogação)
    Ao tentar dar restart nas mensagens, recebo a seguinte mensagem de erro:
    You cannot restart XML message E07AFA5FD584CEF1B15C3C4A927627EC with this status/type
    Message no. XMS_ADM085
    Diagnosis
    You want to reschedule an XML message that has already been processed (Restart). However, the XML message status or type does not permit a restart.
    System Response
    You can only restart asynchronous XML messages.
    Furthermore, you can only reschedule XML messages with errors. You cannot restart correctly processed XML messages or XML messages with the status Being Processed.
    Tem algo que possa ser feito sem ter que alterar tabelas?
    Como a equipe responsável pelo PI/GRC fica fora do BR, é bem complicado conseguir autorização para qquer coisa nesse sentido em PRD.
    ps.: Agora cliquei no "Expand all messages", para cada um dos MsgIDs, apareceram 2 novas linhas, uma com status = Scheduled (bandeira verde) e outra com status Scheduled for Outbound Processing (seta preta), ambos com o awaiting ack.
    => SMQ1 e SMQ2 ambas sem entradas.
    Obrigado!
    Eduardo Hartmann

    Eduardo,
    O NFe type = 2 (cancelamento)?
    Se sim, me parece que o pedido de cancelamento foi enviado pra assinatura e nao teve resposta, provavelmente devido ao fato de o J2EE estar fora. Nesse caso, o batch status é irrelevante (ele só é relevante pro processo de envio de NFe, não pra cancelamento/inutilização).
    O "correto" seria vc identificar onde a mensagem de assinatura parou (i.e. se em alguma fila - SMQ1/SMQ2, se tem q restartar o BPM etc.). Mas como o passo de assinatura é stateless, diferentemente do processamento da SEFAZ, vc poderia simplesmente "marretar" um status de erro de assinatura de cancelamento na /xnfe/nfe_hist (verifique o valor apropriado do error status no domínio do campo) e restartar a assinatura do cancelamento pelo monitor de NFe do GRC, aba de erro de assinatura.
    Abs,
    Henrique.

  • 105 lote esta processando - Erro 40 de sistema de PI - Batch Status Query

    Prezados,
    Nós temos um lote em GRC com os detalhes seguintes código de estado - 105 lote esta processando.
    Nós temos um lote em GRC com os detalhes seguintes:
    - Código de estado: 105 "lote esta processando"
    - Estado de lote: 04 "pedido enviou"
    - Estado de Error: 40 questão de estado de lote: Erro de sistema de PI"
    Reiniciando o lote por monitor de GRC resulta em um erro "Erro processo inicial Envie Lote (lote ID 000000000013825)"
    Algumas ideas ou sugestoes para proceder?
    Obrigado
    Marc de Ruijter
    Key words for thread search:
    - Error status 40 Batch status query: PI system error
    - Batch status 04 request sent
    - Status code 105 batch being processed

    Creio que estou com o mesmo problema,
    Estou com um lote com erro no status 5 mensagem "Consulta de status de lote: erro de sistema PI" e ao reiniciar o lote encontro a mensagem a abaixo:
    "Erro ao inicializar o processo Enviar lote (nº de lote 000000000000XXX)".
    Na sxi_monitor do PI não apresenta erro nenhum!! eu conferi a tabela citada na thread  e tinham vários registros e um deles referente ao meu lote. Apaguei apenas o referente ao meu lote porem ainda não reinicia.

  • Batch status change with UD

    Hi Everybody,
    I have a question about batch status change while taking UD. I understand that stock posting and batch status for each UD code is decided by the value in 'Posting proposal UD' field in Selected Set settings. I understand that I can customize the movement types for the values (eg VMENGE01, VMENGE02 etc) in config. But that is only for stock posting. From what setting is the Batch status decided eg. If we approve, the batch is unrestricted and if we reject it is restricted.
    Can I customize those values which are available in the drop down in the 'Posting proposal UD' ? Can I create a value of my own ?
    Regards,
    Manish Saraswat

    Manish,
    execute tcode QS51
    you will be able to see 'Posting Proposal UD' in "Selected Set ". Now select that line (Posting Proposal UD line). Status for Posting Proposal UD should be "Released"
    After selecting that line on left hand side there is " Dialog Structure " in that there is " Selected Set Code " Click on that.
    Complete list of code will come you can add and modify those codes.
    Hope now its clear to you.
    Edited by: tejasg on Mar 24, 2010 4:21 PM

  • Batch status at recurring insp lot creation

    We have setu recurring insp 09 for few materials. We use "insp stock at creation" option. So system work as expected and create lot and put stock in QI, but still batch status remain "unrestricted". Our req is at the time of lot creation it self system should set batch status as "restricted". How to setup it?
    When system setup "restricted" status for recurring batch? Help appreciated.

    check option
    Recurring Inspection: Block Batch at Lot Creation
    Specifies, that a batch is blocked, when the inspection lot is created, if the inspection date lies within the opening period.
    Use
    If you choose this option, batches are blocked, if their next inspection date lies within the opening period:
    If the batch status management is active in the corresponding plant, the batch status is changed to "restricted".
    If the batch status management is not active in the corresponding plant, the batch stocks are transferred to the blocked stock.
    If the batch status has changed or a transfer posting takes place, a new inspection lot is created for each storage location.
    If a relevant inspection lot already exists and the next inspection date has already been reached, the change of the batch status or the transfer posting also takes place

  • How to find required information in order to log on Business View Manager?

    After Business Object Client installation successfully, I try to log on Business View Manager, but failed. One pop-up windows(Log on BusinessObjects Enterprise) come and let me put the information as below;
    System:
    User name:
    Password:
    Authentication:
    Could anyone let me know how to find the above required information? Thanks!

    You need to find this information from a person who installed server part of this deployment.
    System: Name of the CMS server
    User name: Administrator or other user name that exist in the Enterprise
    Password: obviously...
    Authentication: type of the authentication setup on the server side for the user you will be using.

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • The Boot Configuration Data file is missing requires Information

    My ideapad U310 doesn't boot any more after the boot procedure was interrupted by power outage.
    A blue screen shows the following:
    Recovery
    Your PC needs to be repaired
    The Boot Configuration Data file is missing some required information.
    File: \BCD
    Error Code: 0xc000000d
    You'll need to use the recovery Tools on your installation Media. If you don't have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer.
    Press ESC for UEFI Firmware Settings

    I can only make one suggestion. Boot from usb Recovery flash drive and hope that the startup repair will do their magic to your unit.

  • HP Stream 7 The boot configuration data file is missing some required information

    I have an HP Stream 7 tablet.  When I open it up it shows a blue screen with the error "The boot configuration data file is missing some required information."  Can anyone help as I can't get into the tablet to solve the error!

    Hey @PaD2 ,
    Welcome to the HP forums.
    I understand you're unable to boot up your Stream 7 tablet.
    Try accessing the recovery partition by holding the volume down button and power button at the same time. Please excuse my ignorance, as exact information on accessing the recovery manager appears to be unavailable for this exact model. If the down button doesn't work, up should get you in.
    Once in the recovery manager you should be able to select Troubleshoot > Startup repair. 
    If the startup repair does not fix the issue I would suggest trying the full system recovery option, which you should find under Troubleshoot > Advanced.
    Thanks.
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • File: \BCD file is missing some required information

    When trying to boot my HP Split x2 laptop I'm getting a BLUE SCREEN error "Recovery  Your PC needs to be repaired. The Boot Configuration Data file is missing some required information.  File: \BCD  Error Code: 0xc0000034.  I've tried everything that I can think of, but I can't get by this screen.  I have no CD/DVD drive in this model so I can't run any diagnostic tools, even if I had a tools CD/DVD. I'm stuck!  Please help!

    Went into a command prompt and ran a few bootrec commands:
    Bootrec /fixMBR
    bootrec /fixBoot
    bootrec /rebuildBCD
    This resolved things for me

  • Batch status disappearing after taking the UD (QA11)

    Hi Experts,
    We are facing the following issue (ECC6.0 EHP5 with no enhancement activated):
    - when the UD is made for the IL created at GR from purchase order (origin 01), the batch status initially set at GR (Q) is cleared; same time the UD for the IL is recorded and kept correctly (UD has the new status)
    - when this UD is changed for the same IL, the batch status is getting updated with the new status; the UD for the IL is correctly updated, too.
    We have implemented the note 1687321, but the problem still persists.
    Has anyone of you faced the similar problem? Any hints where to look for the root-cause?
    I've checked the user exits for batch update and QA11 (based on forum posts), but they are not called at making UD or they have correct values.
    Thanks for help,
    /J

    Hi FF,
    I think we are on the same page with terminology
    Indeed, our process is a bit "enhanced" I would say. When doing the GR from purchase order, the batch characteristic LOBM_UDCODE is pre-filled with the UD of "Q" (LEANQM1  Q) whereas the IL created upon packing of HUs has no UD.
    Then, when user makes UD for this IL, the pre-filled UD on batch level should be changed to the UD user made. It is not and the value disappears. I've run some checks on the ABAP code and the issue seems to be caused by the VB_CHANGE_BATCH used in the MQEVAF40 in form charge_klassifizieren. When the initial UD is made (QA11), the internal table for this f-n module has only the new values the batch classification is to be updated with. When the UD change is made (QA12) - both new and old values are provided. If I change the internal table values to include old and new ones for the initial UD, the process works correctly (batch LOBM_UDCODE is updated with new value).
    As we are upgrading to ECC6 EHP5, I've compared the flow to the ECC5 and the values provided to VB_CHANGE_BATCH at initial UD (QA11) are the same for both systems. The process works in ECC5. As result, we have created the OSS message.
    In MSC3n changes to the batch characteristics are visible from change docs - and the log is kept for QA11 and QA12. For the removal of LOBM_UDCODE it displays "deleted" values, and for QA12 it shows "created" values. In other words - change logs are working correctly.
    Once SAP responds to OSS message I will update this tread. Any ideas appreciated.
    /J

Maybe you are looking for