Required tabstrip and subscreen program

hi all
any body can send me the sample program for tabstrip and sub screen program.
and send me the documentation how to work on tabstrip and subscreens.
thanks,
maheedhar

Hi
Ex1:
REPORT demo_dynpro_tabstrip_local.
CONTROLS mytabstrip TYPE TABSTRIP.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
mytabstrip-activetab = 'PUSH2'.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command INPUT.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
    MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  mytabstrip-activetab.
ENDIF.
ENDMODULE.
Ex2:
REPORT demo_dynpro_tabstrip_server.
CONTROLS mytabstrip TYPE TABSTRIP.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA number TYPE sy-dynnr.
mytabstrip-activetab = 'PUSH2'.
number = '0120'.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE user_command INPUT.
save_ok = ok_code.
CLEAR ok_code.
IF save_ok = 'OK'.
    MESSAGE i888(sabapdocu) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  mytabstrip-activetab.
ELSE.
    mytabstrip-activetab = save_ok.
    CASE save_ok.
      WHEN 'PUSH1'.
        number = '0110'.
      WHEN 'PUSH2'.
        number = '0120'.
      WHEN 'PUSH3'.
        number = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.

Similar Messages

Select-Options in Tabstrip and Subscreen for MIGO

Hi,
I have to enhance MIGO tansaction using screen exit.
I have to create a tab called Serial Number Ranges and inside the tab create a sub screen.
Inside the subscreen i have to create a range (select option for Serial Number.)
I have create a module pool program and created one screen with the tab and subscreen.
In the main program i have create a selection screen as subscreen and declared select options.
then i have called the screen in PBO and PAI..
it doesnt seem to work...
can u suggest a solution different from this?

Hi,
Check out these links:
[http://sample-code-abap.blogspot.com/2008/06/select-option-in-module-pool-screen.html]
[http://abap-explorer.blogspot.com/2008/08/create-select-options-in-module-pool.html]

Tabstrip and Subscreen

Dear All
I have used tabstrip with two taps. In the first tap, I used input controls to get two inputs. In the second tab, the addition of two inputs.from the first tap.
I have placed a sub screen(first). I called another one sub screen(second) from this sub screen. Two fileds available in the second sub screen. The above is same for tab2.
Second sub screen didn't called when i execute.
How to solve this....?????
Refer the following link
http://www.4shared.com/dir/7546404/59f81067/sharing.html

Hello.
When you use statement:
CALL SUBSCREEN sub1 INCLUDING sy-cprog dynnr
check the value of var sub1 and dynnr in debug mode.
Also, in screen painter, check the FCODE (ok_code) you assigned to the tab, and see in user-command what do you do with that ok_code.
Regards.
Valter Oliveira.

A Required COM Add-in program for XL Reporter has not been loaded and ....

A Required COM Add-in program for XL Reporter has not been loaded and prohibits Microsoft Excel from running. For more information, click help.
XL 2007, with the Trust level for macros set to minimum. SBO 2007 PL 42.
Thanks
Charles

Read the following solution from SAP for your problem:
When we open XL Reporter we get an error
message "A required COM add-in program for XL Reporter has not been loaded
and prohibits Microsoft Excel from running." when trying to open a report
definition.
SOLUTION FOR THE PROBLEM:
Reason and Prerequisites
You need to be an administrator on the local machine to add COM add-ins.
Solution
The user should be added as a member of the administrator role on the
local computer the first time you start Excel from XL Reporter the first
time so that the COM addin are registered, then you can remove the user
from the administrator group again.
Manually Loading the XL Reporter Excel COM Add-In
Symptom
If you install Microsoft Office after installing the XL Reporter
application or use another Windows user than the one you used when
installing XL Reporter, you can get an error message.
Reason and Prerequisites
The reason for this is that the report writer COM Add-in has not been
loaded, which prohibits Microsoft Excel from running.
Solution
1. Start Microsoft Excel. If you already have the COM Add-ins command on
the Tools menu, go to step 7.
2. In the Tools menu, choose Customize.
This opens the Customize window.
3. Choose the Commands tab and select Tools from the Categories pane on
the left.
4. In the Command pane on the right, scroll down to the COM Add-ins
command.
5. Select the COM Add-ins command, hold down the mouse button, and drag
COM Add-ins from the Commands pane over to the Tools menu on the Microsoft
Excel men bar. When the Tools menu commands appear, point to where you
want the COM Add-ins command to appear on the menu and release the mouse
button.
6. To close the Customize window, choose Close.
7. On the Tools menu, choose the new COM Add-ins option.
This opens the COM Add-ins window.
8. In the window, choose Add to open the Add Add-in window.
9.Select the IXXLReporter.dll file located in the Client directory in the
XL Reporter program installation area and choose OK.
10. In the COM Add-ins window, select the XL Reporter checkbox and choose
OK.

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products.

My Mac Pro has a 10.5.8 version, I need to upgrade to 10.6 to be able to upgrade to OS Lion and other programs that require 10.6 or newer

My Mac Pro has a 10.5.8 version, I need to upgrade to 10.6 to be able to upgrade to OS Lion and other programs that require 10.6 or newer

It's not your wording that's at issue. It's the incorrect information you provided. Go back and read my reply.
I'm sorry but I can't help your mis-wording. I can only make sense from what you have written. Your location is the UK so I must assume English is your first language without other information to go by.
If you wrote the same thing a hundred times in one day, then you'd use copy and paste, too. So don't insult those of us who do.

My MAC Mini requires reentering password after an unspecified time and running programs are interrupted

My MAC Mini at unspecified times switches to require reentering the password and running programs are interrupted.
I do not find a way in Preferences to correct this. Software OS X 10.9.5 (13F34)

From the menu bar, select
 ▹ System Preferences... ▹ Security & Privacy
If there's a closed padlock icon in the lower left corner of the preference pane, click it and enter your login password when prompted.
Click the Advanced button and, in the sheet that opens, uncheck the box marked
Log out after … minutes of inactivity

Require details or list of seeded reports and import programs in fusion HCM

Hello All,
Kindly provide me the list of seeded reports and Import programs available in Oracle Fusion HCM .
Regards,
S Rao

Please raise a SR

TabStrip and Field Exit......

Hi Friends,
I need the complete step by step working process of "Tabstrip and FieldStrip".Also any sample code will be highly appreciated.
Points will be rewarded for Requirement.
Thanx ,
Mandeep.

Hi,
TABSTRIP
Tabstrip is used to display multiple subscreens on the same area of the screen in designing transactions
see the links related to Module pool, in which you find the Tabstrip
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
FIELD-EXIT
http://www.erpgenie.com/abap/fieldexits.htm
http://www.sap-basis-abap.com/sapab014.htm
V4.6c onwards no longer supports field exits!!! In any case here's how to activate them:
Activation of the field exits and assignment of the dynpros is carried out using program RSMODPRF. For this purpose, the program must be started without parameters (input fields remain blank). If required, new field exits can be created using program RSMODPRF (see below for documentation).
Field Exits for Data Elements
Description
Maintenance transaction for creating and activating field exits
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Questions and answers on field exits
1. A field exit was created with the CMOD and activated, but it does not get executed when the screen is called.
Since the field exit is not executed until DCI, some action must occur in the screen (e.g. press Return, saving....).
Set the abap/fieldexit profile parameter to YES and start the system again.
After the FIELD_EXIT... function module has been activated and the field exit has been activated, the transaction in whose screen the field exit is to be executed must be terminated. The screen is not generated until it is called.
Do not work on different application servers, otherwise there may be a delay before the field exit becomes active.
The profile parameter must be set either on all application servers or on none.
If the field exit is to be active in certain screens only, then you should check whether you have selected the correct program and the correct screen number (Careful with SUBSCREENS Do not rely on the F1 information for the field!
2. How does setting abap/fieldexit affect the performance?
If a screen is generated and the profile parameter is set, then the system checks in 2 tables (TDDIR, TDDIRS) to see whether a field exit has to be generated for the field. In practice the screen load after a Put is not generated until the screen is called. The user will not experience a noticeable delay, since screen generation is extremely fast.
3. Can the contents of other screen fields be read in a field exit?
In principle all fields can be copied to global variables in the TOP or the function group. However, since the order in which the field exits are called is not guaranteed, this possibility should not be used.
4. How does the field exit work in step-loop fields?
After data input to DCI the field exit will be called as many times as fields are visible on the step-loop. The SY-STEPL system variable is incremented each time. If a new value is assigned to be field, then it will be visible in the module between LOOP. ENDLOOP. This module will also be called as many times as there are visible step-loop lines.
5. Can field exits be debugged?
No. Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
6. What should one do if the field contents are not getting transported to ABAP/4?
Check whether you have assigned a value to the OUTPUT field.
7. When does the field exit get called in the case that there is a conversion exit attached to the data element?
The field exit will be called after the conversion exit. This means that the INPUT field contains the data in the same form as that in which the ABAP/4 program also gets them
Regards,
Priyanka.

Subscreen and subscreen area

Hi all
Can anybody please explain both subscreen and subscreen area..
Thanks and regards
popin

Hi,
Subscreens are screens which can be embeded into another screen. These can be used and created with both selection screen as well as screen painter.
They differ from normal screens in the way that that they don't have OK_CODE field of ther own and there PBO and PAI transfer data to the ABAP program in which these screens were created and the cannot have module calls which change status or leave screen and module call AT EXIT-COMMAND AND E type function codes.
In screen painter(SE51) choose the subscreen tool button and draw a subscreen area on the screen,this subscreen area will be used to hold the subscreen at run time.To make a subscreen select the attribute screen type as subscreen and specify the size of the subscreen according to the size of the subscreen area in which it will be placed.
We use ABAP statement to embed and start the flow logic of the subscreen area in the PBO of a screen. A subscreen can contain another subscreen.
CALL SUBSCREEN subscreen_area INCLUDING program screen_number.
A similar call should also exist in PAI of screen.It will also call the PAI modules of the subscreen and will transfer data from subscreen to ABAP program.
CALL SUBSCREEN subscreen_area.
Subscreen can be created in selection screen using ABAP ststement and can be used with tabstrip defined on the selection screen or with the screen defined in the screen painter.
SELECTION-SCREEN BEGIN OF SCREEN screen_number AS SUBSCREEN NO-INTERVALS.
SELECTION-SCREEN END OF SCREEN screen_number .
to use such a subscreen with tabstrip defined on the selection screen we should
use the DYNNR compnent of the structure which is created when the tabstrip is created and specifying the number of the screen .We can also define the subscreen statically for such a tabstrip by using
DEFAULT PROGRAM program SCREEN subscreen_number when declaring a tabstrip in selection screen.
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab_area FOR height LINES.
SELECTION-SCREN TAB (width)tab_name USER_COMMAND funct_code DEFAULT program SCREEN subscreen_no .
END OF BLOCK tab_area .
For each tabbed apge TAB addition is used with SELECTION-SCREEN statement. At the initialization event we can fill the tabstrip structure to dsiplay the default screen or specify it with DEFAULT addition.
tab_area-PROGRAM = SY-REPID.
tab_area-DYNNR = subscreen_nummber.
tab_area-ACTIVETAB = tabname.
Regards,
Sruthi

Controling the PM ORDER tabs and subscreen

Hello
We are trying to customize PM ORDER.
We looked for a way in which we could control the appearance of tabs and subscreens in customization and found none.
We found that ther is a BADI IWO1_SCREEN_MODIF that seems to be for that purpose.
Is it the only way or there is a way like when customizing notification.
Second question is about the notification fields when creating a PM ORDER that creates a notification. We have not found any way of controling the tabs and subscreens.
Best regards
Shlomo Assouline

Hi Shlomo Assouline,
GuiXT is a SAP Partner software integrated with Standard SAP.
This helps in Changing the Field names, Location, Screen Layout etc with out any program and with simple syntax.
It gives amazing results if done properly. It has a big drawback too. It is PC specific & cannot be controlled based on who logins etc. But if you want same screen through out your Business the small TXT file created can be copied into other PC (personal Computer) as well.
For detailed information on this see the link www.synactive.net. It has some Tutorials too there.
The path in SAP to activate it is Click on "Customise Local Layout" the button adjacent to Help button after you logon.
Under that you will see "Activate GuiXT". From there on you can proceed. When you do not require switch it off as it is Toggle Button.
Regards,
MLN Prasad

What is difference between report programming and dialog programming?

hi,
what is difference between report programming and dialog programming? plz provide some example code
bye

ABAP programming
Basically reports are used to read database and represent the results in lists.
Reports are collections of processing blocks that the system calls depending on events.
We can use reports to evaluate data from database tables.
Reports are stand alone programs and controlled by events.
A report itself never creates events
steps in report:
Processing the selection screen
Reading the database
Evaluating the data and creating lists
Outputting a list.
1st u write simple logics, after that u can enhance the code as step by step.
http://venus.imp.mx/hilario/Libros/TeachYrslfAbap4/index.htm
http://help.sap.com/saphelp_47x200/helpdata/en/d1/802cfc454211d189710000e8322d00/frameset.htm
http://www.sapdev.co.uk/reporting/reportinghome.htm
Dialog Programming
Structure of a Dialog Program
A dialog program consists of the following basic components:
Screens (dynpros)
Each dialog in an SAP system is controlled by dynpros. A dynpro (DYnamic PROgram) consists of a screen and its flow logic and controls exactly one dialog step. The flow logic determines which processing takes place before displaying the screen (PBO-Process Before Output) and after receiving the entries the user made on the screen (PAI-Process After Input).
The screen layout fixed in the Screen Painter determines the positions of input/output fields, text fields, and graphical elements such as radio buttons and checkboxes. In addition, the Menu Painter allows to store menus, icons, pushbuttons, and function keys in one or more GUI statuses. Dynpros and GUI statuses refer to the ABAP/4 program that control the sequence of the dynpros and GUI statuses at runtime.
ABAP/4 module pool
Each dynpro refers to exactly one ABAP/4 dialog program. Such a dialog program is also called a module pool, since it consists of interactive modules. The flow logic of a dynpro contains calls of modules from the corresponding module pool. Interactive modules called at the PBO event are used to prepare the screen template in accordance to the context, for example by setting field contents or by suppressing fields from the display that are not needed. Interactive modules called at the PAI event are used to check the user input and to trigger appropriate dialog steps, such as the update task.
All dynpros to be called from within one transaction refer to a common module pool. The dynpros of a module pool are numbered. By default, the system stores for each dynpro the dynpro to be displayed next. This dynpro sequence or chain can be linear as well as cyclic. From within a dynpro chain, you can even call another dynpro chain and, after processing it, return to the original chain.
Check this link for basics.
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
Check this link for Dialog Programming/Table Control
http://www.planetsap.com/Tips_and_Tricks.htm#dialog
Check this SAP Help for Dialog Program doc.
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this SAP Help link for Subscreens.
http://help.sap.com/saphelp_nw70/helpdata/en/9f/dbabfe35c111d1829f0000e829fbfe/content.htm
Check this link for subscreen demo program.
http://abapcode.blogspot.com/2007/05/demo-program-to-create-subscreen-in.html
Also check this link too.
http://abapcode.blogspot.com/2007/06/dialog-programming-faq.html
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/frameset.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld004.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670ba2439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/52/670c17439b11d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9ccf35c111d1829f0000e829fbfe/frameset.htm
http://abapprogramming.blogspot.com/

After downloading and running program to install keeps saying file is corrupt. I have used this on computer before and had crash and am trying to reinstall. Have 2.? gh dual core processor with 4megs ram and a 320 gb hard drive using windows 7 64bit.

After downloading and telling program to run it will not open the firefox install utility keeps saying file is corrupt. I had a computer crash and having to reinstall all of my programs. I have a 2.? Gh dual core processor running windows 7 64bit, which I had before, with 4 megs ram and a 320 gb hard drive so I know I have the system requirements.
== This happened ==
Every time Firefox opened
== today 5/24/10 ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?

I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
elements or to send photos as attachment to your e-mail. I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated.

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

Required tabstrip and subscreen program

Similar Messages

Maybe you are looking for