Required Text Fields in Forms not Working

I have created a couple of forms that have fields that must be entered. I have set them to be User Entered, Required Fields and also put in a message that should come up when the field is left blank. This doesn't seem to be working. I can still tab through the fields and leave them blank. Also, out of 7 required fields, only one displays the message I entered when I leave the field blank. Everything looks the same so I can't figure out why it lets me leave required fields blank or why it does not pull up the messages I entered.
Any help would be greatly appreciated.
Thanks

Try deleing the Safari Cache.db
Open a Finder window. From the menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that made a difference, go to Safari > Preferences > Advanced
Select: Show Develop menu in menu bar
Now from the Safari menu bar click Developer > Empty Caches (or Command + Option + E)
Emptying the cache after every Safari session may help and faster to do from the menu bar then trashing the Cache database file on a consistent basis.

Similar Messages

SRM 7.0 custom field made required in field control but not working

Dear Gurus,
I have added one custom field in the SC, made it mandatory/required with by setting flag in the field control. But i can save/park/order the SC without entering any value in the field.
However, if i set the same option for a standard field like "shopping cart name", the user cannot go further without entering a value. Although I can handle this with the BAdI, but shouldn't this work?
Regards
Ali

Although I can handle this with the BAdI, but shouldn't this work?
I'd say Yes it should. But it is not working based on my observation. I'd suggest that you create an OSS message and get an official SAP response to this issue.

Publishing HTML(Page content) field required field validation is not working

The required field validation is not working on Site Column of type "Full HTML content with formatting and constraints for publishing". I found a link i.e.
https://social.msdn.microsoft.com/Forums/office/en-US/7b544aae-2562-4b8e-8e5b-36a1d47a4d14/publishing-htmlpage-content-field-required-field-validation-is-not-working?forum=sharepointdevelopment
which tells this is a hot fix in July 2014 CU . Can anyone help me with what all Fixes are there in July 2014 CU. So that I can update only if it required!
Or any other alternative where I can use the required field validator on "Full HTML content with formatting and constraints for publishing" column type?

You could add a scripteditor webpart on the newform.aspx page and add client side validation using jQuery.
$(document).ready(function()
var fname = document.getElementById('fname').val();
var lname = document.getElementById('lname').val();
var age = document.getElementById('age').val();
/*Do not know how to get element by class and that too, two different type. Have to check if user chose anything or not*/
$("#submit").click(function()
if(fname.length === 0)
alert("Please input a first name");
else if(lname.length === 0)
alert("Please input a last name");
else if(age.length === 0)
alert("Please input an age");

Text field in table not overflowing onto next page!

Hi,
I have set up a table with a text field in the first row, added buttons to add and delete rows, set to allow page breaks and made the text field to expand to fit and allow multiple lines. The problem I am having is that if I put a lot of text into the text field it will not expand on to the next page so not all of the text is visible. If I just set up a 1 row table the expansion works as I would expect and takes up as many pages as needed. Somewhere along the line the add, remove buttons or their associated javascript or the Repeat Row option seems to be having an effect.
Any ideas?
Thanks,
Greig

Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
On the bodypage properties that's done within the pagination tab.
Make sure that you enable the "Allow page breaks in contents" tickbox.
By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

Custom Master Detail form not working In EBS

Custom Master Detail form not working In EBS
Hi all,
I have two custom tables -- 1) XXX_DIE_Headers
2) XXX_DIE_LINES
I developed a Master Detail form based on above tables. XXX_DIE_Headers is the Master Block (Single record) & XXX_DIE_LINES is the detail block ( Multi line block ).
Yes, I used Appstand,Template.fmb for developing this form. The Master block has three fields out of which Two are required fields and i have given initial value for them.
As i deployed it in APPS(EBS),everything about it is working fine (insert,delete,master-detail behaviour) except querying.
When i press F-11 , It pops up a message "Do you want to save changes you have made" Choice - yes,no,cancel.
I don't want this message to pop up.
The scenario is :- I open the form.( without entering ) Press F11 . The message Pops up.
Please give me suggession on how to work it around so as form directly goes to query mode ,without popping the message.
regards
ravi

It seems that you are changing a database value in your form, do you have any changes in WHEN-NEW-FORM-INSTANCE???
what the form is trying to tell you that you have changed something, do you want to save it?
I suggest you debug your form and see what's happening step by step.
Tony

Text messages ringtones are not working in the Storm Two

Device: Storm Two running OS version 5.0.0.713 on the Verizon Wireless network.
Recently, I upgraded from a Storm One to a Storm Two because of a multitude of issues with the Storm One; not enough memory, constant lock-ups; dropped calls, etc. On the Storm One I had customer ringtones for contacts; so when a contact calls me the phone will sound a specific ringtone for that contact; the same for text messages from that contact. Now that I have the Storm Two the text message tones for the contacts are not working. In fact, even when I select a ringtone for text messages for a contact the phone will ring the generic ringtone that comes with the phone. If I go into the sound profile and change the generic ringtone to one of my own and the contact sends me a text/sms message the phone will ring the ringtone that I selected in the profile that is being used at the time. This is not the way it worked on the Storm One. On the Storm One; if I have a specific ringtone for the contact and that contact sends me a text message it will sound the text messages tone for that contact. These ringtones have worked for previous devices including my Treo and Palm devices. The ringtone files worked well in the previous Storm One.
So to make a long story short; I want to know why my text message ringtones are not working as designed/setup-up. If a contact calls me the phone will sound the ringtone for that contact; but if that same contact text me it will not ring the ringtone for the contact. This is annoying and I am at my wits end trying to find out why this is not working.
Vernon

Hi Jain....
Field separator is for separating the fields.That means it will effect every field in the node.
But end separator is not like that.It will apply at the end ofall fields of a node.It will effect node not a field.
according to ur scenario if u use data.endseparator 'nl',output will come like this
2008/0701$101
2008/0701$102
2008/0701$103
2008/0702$105
if u want new line for every field try to insert a separate node for second field.That means
MT_DATATYPE:
Data -
1:UnBounded
. .OrderDate----
1:1
<Data2> 1:1
. ....OrderNo -
1:1
now give data.endseparator 'nl'
data2.endseparator 'nl'
if possible try like this....
Sreedhar Goud L

BAPI : "BAPI_REQUISITION_CREATE" pass the Long Text Field of *Header Note*,

Hi Experts,
        i am using the BAPI : "BAPI_REQUISITION_CREATE". it' is working Fine.But i need to pass the Long Text Field of Header Note, Item Text, Item Note,Delivery text and Material P.O text through the BAPI.
Plz,Help me to Achieve this.
Thanks in Adv.
V.S.Naidu.

Below is the code for BAPI_PR_CREATE just go through it and your dbout will be solved
it has example for multi line header text as well as line items...!
Hope it helps
CLEAR GV_BAPIMEREQHEADER.
MOVE 'NB' TO GV_BAPIMEREQHEADER-PR_TYPE.
move 'X' To GV_BAPIMEREQHEADER-AUTO_SOURCE.
CLEAR GV_BAPIMEREQHEADERX.
MOVE 'X' TO GV_BAPIMEREQHEADERX-PR_TYPE.
MOVE 'X' TO GV_BAPIMEREQHEADERX-auto_source.
CLEAR WA_BAPIMEREQITEMIMP.
MOVE :
'00010' TO WA_BAPIMEREQITEMIMP-PREQ_ITEM,
**'001' TO WA_BAPIMEREQITEMIMP-PUR_GROUP,
*'TWISTED PAIR CABLE' TO WA_BAPIMEREQITEMIMP-SHORT_TEXT,
'C-1030' TO WA_BAPIMEREQITEMIMP-MATERIAL,
'1000' TO WA_BAPIMEREQITEMIMP-PLANT,
'100' TO WA_BAPIMEREQITEMIMP-QUANTITY,
'20091001' TO WA_BAPIMEREQITEMIMP-DELIV_DATE.
APPEND WA_BAPIMEREQITEMIMP TO GT_BAPIMEREQITEMIMP.
CLEAR WA_BAPIMEREQITEMX.
MOVE :
'00010' TO WA_BAPIMEREQITEMX-PREQ_ITEM,
'X' TO WA_BAPIMEREQITEMX-PREQ_ITEMX,
*'X' TO WA_BAPIMEREQITEMX-PUR_GROUP,
'X' TO WA_BAPIMEREQITEMX-SHORT_TEXT,
'X' TO WA_BAPIMEREQITEMX-MATERIAL,
'X' TO WA_BAPIMEREQITEMX-PLANT,
'X' TO WA_BAPIMEREQITEMX-QUANTITY,
'X' TO WA_BAPIMEREQITEMX-DELIV_DATE,
'X' TO WA_BAPIMEREQITEMX-EXT_PROC_PROF.
*EXT_PROC_REF_DOC
*EXT_PROC_REF_ITEM
APPEND WA_BAPIMEREQITEMX TO GT_BAPIMEREQITEMX.
CLEAR EXTRA_FIELDS.
MOVE '00010' TO EXTRA_FIELDS-BNFPO.
MOVE '12345678901' TO EXTRA_FIELDS-ZZDANOSPR_NO.
MOVE 'MUM01' TO EXTRA_FIELDS-ZZPORT.
MOVE '20100505' TO EXTRA_FIELDS-ZZETD.
MOVE '20100506' TO EXTRA_FIELDS-ZZETA.
MOVE '123456789123456789' TO EXTRA_FIELDS-ZZEXTWG.
MOVE TEMP TO EXTRA_FIELDS-ZZrob.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEM' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONOUT.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONOUT-STRUCTURE.
*MOVE EXTRA_FIELDS TO WA_EXTENSIONOUT-VALUEPART1.
APPEND WA_EXTENSIONOUT TO GT_EXTENSIONOUT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS JUST FOR TEST' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS THE SECOND LINE' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
BREAK-POINT.
CALL FUNCTION 'BAPI_PR_CREATE'
EXPORTING
   PRHEADER                     = GV_BAPIMEREQHEADER
   PRHEADERX                    = GV_BAPIMEREQHEADERX
*   TESTRUN                      =
IMPORTING
   NUMBER                       = GV_NUMBER
   PRHEADEREXP                  = GV_PRHEADEREXP
TABLES
    RETURN                       = GT_BAPIRET2
    PRITEM                       = GT_BAPIMEREQITEMIMP
    PRITEMX                      = GT_BAPIMEREQITEMX
*   PRITEMEXP                    =
*   PRITEMSOURCE                 =
*   PRACCOUNT                    =
*   PRACCOUNTPROITSEGMENT        =
*   PRACCOUNTX                   =
*   PRADDRDELIVERY               =
    PRITEMTEXT                   = GT_PRITEMTEXT
*   PRHEADERTEXT                 =
    EXTENSIONIN                  = GT_EXTENSIONIN
*    EXTENSIONOUT                 = GT_EXTENSIONOUT
*   PRVERSION                    =
*   PRVERSIONX                   =
*   ALLVERSIONS                  =
*   PRCOMPONENTS                 =
*   PRCOMPONENTSX                =
*   SERVICEOUTLINE               =
*   SERVICEOUTLINEX              =
*   SERVICELINES                 =
*   SERVICELINESX                =
*   SERVICELIMIT                 =
*   SERVICELIMITX                =
*   SERVICECONTRACTLIMITS        =
*   SERVICECONTRACTLIMITSX       =
*   SERVICEACCOUNT               =
*   SERVICEACCOUNTX              =
*   SERVICELONGTEXTS             =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
WRITE : 'THE PR CREATED IS : -',GV_NUMBER.

Why is my text messaging app is not working at all, is a blank screen? Help!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work?

My text messaging app is not working PLEASE HELP!!!

My text messaging app is not working at all is a blank screen when I open it! Help!!!

No its a well known bug with iphones caused by their over complication of things and their complacency that their users will buy the phones on looks alone irrespective of its basic functionality.
Suggestion 1 - The most common suggested solution seems to be: iMessage needs switched off on all your devices and switched back on after a rest. I found that this did NOT work.
Suggestion 2 - Having a Wi Fi Signal seems to confuse iMessage to send an SMS as a text or as an iMessage. Turn off WiFi on your phone and manually send as text message. Slow, I lnow!!
Suggestion 3 - Move away from any wifi source ie out of range.
Suggestion 4 - Send an email, or a letter. Its more personal!!
20 Minutes later - still not sent 2 short texts.
Apple are very complacent and disdainful of their user community. Not what Id expect but this is a global corporation with the same business ethics as an Oil company or a car company. Profit not function.

Field Exits are not working in ECC6

Hi Friends,
We upgraded our 4.6C system to ECC6 but after upgradation field exits are not working. What could be the reason.
We are using GUI version-7.1 and SP-10,Release-6.
Rewarded,
Steve

Hi there,
Try this link ... it could help you.
[http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm|http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm]
If not, give an example.
I did the same upgrade without problems.
Best regards.
Valter Oliveira.

Drag n Drop selected Text from Safari, chrome not working on indesign CC

In CS6 If we drag drop any selected text from any app on layout it work but in indesign cc it is working only with some app like TextEdit, notes etc. I knew that very few people have such use case but same is also not working from one of my cocoa app.
while debugging if i drop content from TextEdit and Notes app on some sample app I found that TextEdit & Notes App registered for this Extra Pasteboard type "com.adobe.indesign-import-ustl" and "com.adobe.indesign-import-styl" where as chrome and safari are not. similarly my app is registered only for "NSPasteboardTypeString" type. Is this is the limitation or bug of indesign?

Similar bug(#3710667) was exist in CC before 9.2.2 update as you can see in release notes of 9.2.2(CC last update) here. before fix simple selected text drag & drop did not work from any application except TextEdit .I have also spent hours before this update to find out bug I used ClipBoardViewer sample App to find out current Drop flavour and its content it may help you and before fix I find some workAround first is add flavour in your drop which Indesign understand even if you are not adding any data for that flavour so that you start receiving couldAcceptType() and under this call parse your actual data from PasteBoard and remove all data from pasteBoard so that another next helper will not consume it. as you mention even after adding text flavour your couldAcceptType() not hit so may be this WorkAround not work for you but it worked for me.
second is just a finding i.e before doing drag and drop on indesign create one new document (from Indesign UI not programmatically ) save it on disk close it and reopen it after it every drag & drop will start working work .

I upgraded to iso6.0.1 on 4s and now the battery runs out quickly and text sounds/music do not work. Please can someone help.

Help - I upgraded to iso6.0.1 and now the battery runs out quickly and the text and sound does not work! can anyone help me?
Thanks

Use the search box at the top of this page or look in the MORE LIKE THIS box to your right. If you can find your way to this forum, you certainly can manage a search.

So does Flash Forms not work in Safari?

Does Flash Forms not work on Safari Browser? I have them on
my site but when I try to look at them in Safari, they don't work..
Or do I need to just add some type of extension to my Safari
Browser to View a Flash Form?
Here is the page. it won't work in Safari.. unless I"m
missing an install extension. I just downloaded the browser for
Windows for the first time today and so I wanted to check my site
in that browser.
http://www.jimmyharrell.com/contact.cfm
is the page in question.

yes but still no luck. When you go here do you see my flash
form load in Safari? I'm using Safari for Windows not mac.
http://www.jimmyharrell.com/contact.cfm

Does Flash Forms not work in Safari?

Does Flash Forms not work on Safari Browser? I have them on
my site but when I try to look at them in Safari, they don't work..
Or do I need to just add some type of extension to my Safari
Browser to View a Flash Form?
Here is the page. it won't work in Safari.. unless I"m
missing an install extension. I just downloaded the browser for
Windows for the first time today and so I wanted to check my site
in that browser.
http://www.jimmyharrell.com/contact.cfm
is the page in question.

yes but still no luck. When you go here do you see my flash
form load in Safari? I'm using Safari for Windows not mac.
http://www.jimmyharrell.com/contact.cfm

I have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

i have an phone 4s from cricket and when i text non iphone users such as android or and other phone brand they receive my text message but when they reply i wont get there message. send imessages is working its just my text message that is not working.

You use Restore to get the latest firmware build, not the Update button. You can only use the Update button, if there is an iOS update, say iOS 5.1.
this link talks about updating to 9A406 to fix the "No Service" issue with iPhone 4S:
http://iphone-and-i.blogspot.com/2011/12/fixing-iphone-4s-signal-problem.html

Required Text Fields in Forms not Working

Similar Messages

Maybe you are looking for