Text field in table not overflowing onto next page!

Hi,
I have set up a table with a text field in the first row, added buttons to add and delete rows, set to allow page breaks and made the text field to expand to fit and allow multiple lines. The problem I am having is that if I put a lot of text into the text field it will not expand on to the next page so not all of the text is visible. If I just set up a 1 row table the expansion works as I would expect and takes up as many pages as needed. Somewhere along the line the add, remove buttons or their associated javascript or the Repeat Row option seems to be having an effect.
Any ideas?
Thanks,
Greig

Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
On the bodypage properties that's done within the pagination tab.
Make sure that you enable the "Allow page breaks in contents" tickbox.
By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

Similar Messages

Internal Table data is not overflowing into Next Page - Adobeforms

Hi,
     I have an issue if the internal table consits of more than 20 records that data is not overflowing into next page.
     Here am using Header only on first page & Table will follows...
Regards,
PraVeen..
Edited by: praveenreddys on Feb 15, 2012 10:51 PM

Hi praveenreddys ,
I had the same requirement, I did as follows:
LEFT HAND SIDE SELECT "TABLE": check below right hand side properties for this object
1. table tab: select the check box allow page breaks within content.
2. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
LEFT HAND SIDE SELECT "HEADER": check below right hand side properties for this object
3. row tab: select the check box allow page breaks within content.
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
select the check boxes: Include header row in initial page
                                        include header row in subsequent pages
Binding tab property:
5.select check box: Repeat row for each data item
LEFT HAND SIDE SELECT "ROW": check below right hand side properties for this object
6. Row tab: DON'T select the chek box allow page breaks with in content
4. pagination tab: place: Following previous
                            after:continue filling parent
                           overflow: none.
Binding tab property:
5.select check box: Repeat row for each data item
Then test..it would work for you...ALL THE BEST!!!
If this helps please reward points.
Reards,
Naresh.

Help Req'd! - Table will not flow onto next page!

Hello!
I am currently doing some form design for a large SAP project in the UK and am having problems with getting a table on a remiitance advice form ive created to flow onto a new page.
currently my form is configured as follows:
- saved as a dynamic pdf.
- 2 master pages: the first containing text fields for form title, company logo, addresses, and a disclaimer at the bottom, page numbering, as well as a border created with rectangles. The second contains all of the above except the addresses.
- 1 body page: contains a subform set to flowed (top to bottom) which contains a table with header/data/footer rows. The data row is set to repeat data so as to expand when there is more than 1 dataset.
i have tried playing with content areas but they will not stay at the size to which i draw them and then cannot be manipulated afterwards, also i only have pagination settings available to me on the body page itself in the hierachy. the subform inside it, and the table inside that, have greyed out pagination settings.
finally the body page is set to positioned at present as setting it to flowed causes the subform containing the table to shoot to the top of the page!
The problem I am getting is that the table when containing lots of data just runs off the end of the page!!
Any ideas much appreciated!
Thanks!!
Edited by: Ryan Harris on Jul 3, 2008 1:05 PM

Basically you can tell the bodypage to overflow to the second masterpage when it runs out of space.
On the bodypage properties that's done within the pagination tab.
Make sure that you enable the "Allow page breaks in contents" tickbox.
By the way, just wondering, how did you save the form as dynamic, since dynamic is only enabled in the SAP world by setting a dynamic/enabled flag.
If you are testing outside of sap in the LiveCycle designer you might want to close the file and then reopen it, after you saved it as dynamic. There's a nifty setting in the LiveCycle designer properties which enables you to create dynamic pages by default. It's in the LiveCycle Designer Options.

Flowable Form does not flow onto next page

I have created a form with a table wrapped in a subform and made it flowable and each field expandable. That part works great. However, I cannot get the content to flow to a subsequent page. When the content is too large for the page, it just keeps pushing down beyond the bottom of the form where I cannot even access it.
The form contains a table of three rows and within each of those rows, all but one column contain a table of three rows. The highest level table is wrapped in a subform and it is marked as flowed with each text field set to expand to fit. I've selected every row and subform I can and checked the box "Allow page breaks within content". The forms still does not break at the end of the page but just keeps pushing the data down off the page.
Any help you could give me would be greatly appreciated. Thanks.

Thank you for your assistance. However, that subform is flowed and Allow page breaks within content is checked.
Is there something under pagination for that subform that I might need to do. I tried creating a page 2 and intended to set the Overflow on the pagination tab to page 2 but that is not an option. I can only set this to PageArea1 or ContentArea1 which I see are objects in the master pages and I do not have a page 2 in master pages. Is that the key?

Pages 5 Document Endnotes doesn't allow text continuation onto next page?

For large blocks of endnote citations, Pages 5 doesn't all the text to flow down to the end of the page before going to the next. Rather it treats the endnote text area as its own section, thereby moving the entire text box to the next page. This is problematic from a formatting standpoint because it wastes page space, does anyone have a workaround or suggestions?
Example:
Citation 5 is long but I would like to keep it on the same page as Citation 4 and just let the text continue onto the next page. However Pages 5 doesn't allow me to adjust the endnote text box and just jumps to the next page. Rarely do you see endnotes arranged in this manner in high-level research reports and we can't have this.

I exported a PDF from Pages v5.2.2. This uses Apple's Quartz PDFContext, not Quark.
In Windows 7, I opened this PDF with Adobe Acrobat Reader v11.0.09. I then copied/pasted a paragraph of this PDF content into LibreOffice Writer (v4.3.2.2). Since there was Baskerville in Windows 7, this comment pasted correctly including font-size. I did not have to make any adjustments to LO to accept this text.
On Ubuntu Linux 14.04, with the latest updates, I opened the same PDF in Evince, the default PDF viewer. Adobe does not offer an Acrobat Reader download for Linux. Again, I copied and pasted a paragraph of content from the PDF viewer into LibreOffice Writer. As there was no Baskerville installed, Writer defaulted to the Liberation font, at the correct point size.
In either of these platform scenarios, there were no anomalies with sentence/paragraph newlines .vs. carriage return issues from the PDF document during copy/paste operations. These were default control-v pastes that did not use the Paste Special menu item in LibreOffice.

Print line items on next page if does not fir onto current page

Hello Experts,
I have a query related with Smartform.
For every Line item, I have 4 lines. Means, if there are 4 line itmes in Internal table then it means, on form 16 lines should be printed.
My Requirement - If any of the Line item does not fin onto a single page then shift the whole line item onto next page. Means, If Line item 1 and 2 are printing on 1st page completely, but line item 3 is not able to print completely on 1st page then shift all the 4 lines of line item 3 onto next page.
I tried - Put the main table of main area in a Folder and checked the PAGE PROTECTION of that folder. And in the Foder itself, use a command with checked GO TO NEW PAGE. But it is not printing. Form goes into shortdump.
Please help me to resolve this issue.
Regards
Kuldeep M.

Hi,
U try to fix the no of lines per page. If the no of lines in ur table are more than the lines per page then u call the COMMAND 'Go to New Page' and give the Page name.
Eg:
data : lv_lines TYPE i,
          lv_lines_per_page TYPE i value 12.    (Try to design the Window height to fit 12 lines or ur wish)
          lv_count TYPE i.
describe table itab lines lv_lines.
Now, u loop the itab table and put a condition in the LOOP:
LOOP AT itab.
lv_count = lv_count + 1.
IF lv_count GT lv_lines_per_page.
   clear lv_count.
   create command 'Go to New Page'.             --->In COMMAND put condition lv_count GT 12
endif.
ENDLOOP.
Hope it helps!!
Rgds,
Pavan

BAPI : "BAPI_REQUISITION_CREATE" pass the Long Text Field of *Header Note*,

Hi Experts,
        i am using the BAPI : "BAPI_REQUISITION_CREATE". it' is working Fine.But i need to pass the Long Text Field of Header Note, Item Text, Item Note,Delivery text and Material P.O text through the BAPI.
Plz,Help me to Achieve this.
Thanks in Adv.
V.S.Naidu.

Below is the code for BAPI_PR_CREATE just go through it and your dbout will be solved
it has example for multi line header text as well as line items...!
Hope it helps
CLEAR GV_BAPIMEREQHEADER.
MOVE 'NB' TO GV_BAPIMEREQHEADER-PR_TYPE.
move 'X' To GV_BAPIMEREQHEADER-AUTO_SOURCE.
CLEAR GV_BAPIMEREQHEADERX.
MOVE 'X' TO GV_BAPIMEREQHEADERX-PR_TYPE.
MOVE 'X' TO GV_BAPIMEREQHEADERX-auto_source.
CLEAR WA_BAPIMEREQITEMIMP.
MOVE :
'00010' TO WA_BAPIMEREQITEMIMP-PREQ_ITEM,
**'001' TO WA_BAPIMEREQITEMIMP-PUR_GROUP,
*'TWISTED PAIR CABLE' TO WA_BAPIMEREQITEMIMP-SHORT_TEXT,
'C-1030' TO WA_BAPIMEREQITEMIMP-MATERIAL,
'1000' TO WA_BAPIMEREQITEMIMP-PLANT,
'100' TO WA_BAPIMEREQITEMIMP-QUANTITY,
'20091001' TO WA_BAPIMEREQITEMIMP-DELIV_DATE.
APPEND WA_BAPIMEREQITEMIMP TO GT_BAPIMEREQITEMIMP.
CLEAR WA_BAPIMEREQITEMX.
MOVE :
'00010' TO WA_BAPIMEREQITEMX-PREQ_ITEM,
'X' TO WA_BAPIMEREQITEMX-PREQ_ITEMX,
*'X' TO WA_BAPIMEREQITEMX-PUR_GROUP,
'X' TO WA_BAPIMEREQITEMX-SHORT_TEXT,
'X' TO WA_BAPIMEREQITEMX-MATERIAL,
'X' TO WA_BAPIMEREQITEMX-PLANT,
'X' TO WA_BAPIMEREQITEMX-QUANTITY,
'X' TO WA_BAPIMEREQITEMX-DELIV_DATE,
'X' TO WA_BAPIMEREQITEMX-EXT_PROC_PROF.
*EXT_PROC_REF_DOC
*EXT_PROC_REF_ITEM
APPEND WA_BAPIMEREQITEMX TO GT_BAPIMEREQITEMX.
CLEAR EXTRA_FIELDS.
MOVE '00010' TO EXTRA_FIELDS-BNFPO.
MOVE '12345678901' TO EXTRA_FIELDS-ZZDANOSPR_NO.
MOVE 'MUM01' TO EXTRA_FIELDS-ZZPORT.
MOVE '20100505' TO EXTRA_FIELDS-ZZETD.
MOVE '20100506' TO EXTRA_FIELDS-ZZETA.
MOVE '123456789123456789' TO EXTRA_FIELDS-ZZEXTWG.
MOVE TEMP TO EXTRA_FIELDS-ZZrob.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEM' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONIN.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONIN-STRUCTURE.
MOVE EXTRA_FIELDS TO WA_EXTENSIONIN-VALUEPART1.
APPEND WA_EXTENSIONIN TO GT_EXTENSIONIN.
CLEAR WA_EXTENSIONOUT.
MOVE 'BAPI_TE_MEREQITEMX' TO WA_EXTENSIONOUT-STRUCTURE.
*MOVE EXTRA_FIELDS TO WA_EXTENSIONOUT-VALUEPART1.
APPEND WA_EXTENSIONOUT TO GT_EXTENSIONOUT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS JUST FOR TEST' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
clear wa_PRITEMTEXT.
MOVE '00010' TO wa_pritemtext-preq_item.
move 'B01' TO WA_PRITEMTEXT-TEXT_ID.
MOVE 'THIS IS THE SECOND LINE' TO WA_PRITEMTEXT-TEXT_LINE.
APPEND WA_PRITEMTEXT TO GT_PRITEMTEXT.
BREAK-POINT.
CALL FUNCTION 'BAPI_PR_CREATE'
EXPORTING
   PRHEADER                     = GV_BAPIMEREQHEADER
   PRHEADERX                    = GV_BAPIMEREQHEADERX
*   TESTRUN                      =
IMPORTING
   NUMBER                       = GV_NUMBER
   PRHEADEREXP                  = GV_PRHEADEREXP
TABLES
    RETURN                       = GT_BAPIRET2
    PRITEM                       = GT_BAPIMEREQITEMIMP
    PRITEMX                      = GT_BAPIMEREQITEMX
*   PRITEMEXP                    =
*   PRITEMSOURCE                 =
*   PRACCOUNT                    =
*   PRACCOUNTPROITSEGMENT        =
*   PRACCOUNTX                   =
*   PRADDRDELIVERY               =
    PRITEMTEXT                   = GT_PRITEMTEXT
*   PRHEADERTEXT                 =
    EXTENSIONIN                  = GT_EXTENSIONIN
*    EXTENSIONOUT                 = GT_EXTENSIONOUT
*   PRVERSION                    =
*   PRVERSIONX                   =
*   ALLVERSIONS                  =
*   PRCOMPONENTS                 =
*   PRCOMPONENTSX                =
*   SERVICEOUTLINE               =
*   SERVICEOUTLINEX              =
*   SERVICELINES                 =
*   SERVICELINESX                =
*   SERVICELIMIT                 =
*   SERVICELIMITX                =
*   SERVICECONTRACTLIMITS        =
*   SERVICECONTRACTLIMITSX       =
*   SERVICEACCOUNT               =
*   SERVICEACCOUNTX              =
*   SERVICELONGTEXTS             =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
*   WAIT          =
* IMPORTING
*   RETURN        =
WRITE : 'THE PR CREATED IS : -',GV_NUMBER.

Table row does not flow to next page

Hi,
I am using deep structure table in adobe form but the content is not flowing to next page.
I have wraped the table in subform, Body Page, subform and table all are flowed and allow page breaks with content is also ticked, still the table row does not flow to next page.
Regards,
Kimaya

Hi Kimaya,
Just drag the table directly on the body page and execute the form. This should take care of the properties required for data to flow on the form.
Thanks

BIP Report PDF layout not extending to next page

Hi,
I am using BI Publisher Report.
I need to show the data in columns. Ex: Plan Name. Each plan name should be shown in separate column. While doing so, when the paper size is completed, data is not printing in next page.
I need to merge the cells above the Plan Name along with the heading on the first column. But merging is not happening.
But the merging is not happening as expected. Merging is happening as below
Is there any thing which I am missing. Could any one help me in this regard.
Thanks!
Regards,
Kishore Nerella

Hi Vaibhav,
Is there any error displayed for this issue? If you can debug the ASP.NET application in VS, can you try to set breakpoint at the event
protected
void
Application_Error(object
sender,
EventArgs
e)
in Global.asax.cs to see whether the breakpoint would be hit and what kind of error it is when clicking next page.
Thanks,
Wynn

Pressing tab key within table not scrolling to next input field

Hi All,
I have a table with editable and read only fields. I have more than 20 columns. When the tab Key is pressed it scrolls only to the editable fields that are in the visible screen. It does not scroll the table to the right to the next input field.
However if I change the screen size so that the scroll bar is required for the browser then it will scroll across moving the browser scroll bar, moving the cursor to the input field that was not visible. Again it does not go further moving the scroll bar within the table to the next editable field to the right.
The table has been set to scrollable with the scrollable column count set to 8.
We are using explorer 8 on 7.01
Is it possible to have the tab key move from input field to input field scrolling the table to the next input field if it is not visible yet?
Thanks
Bruce

What you describe sounds like the correct functionality. If you set a scrollable column count, only the visble rows are actually rendered on the client side. When you use the horizontal scroll bar, you are triggering a server side event to retrive the next set of visible columns. Therefore the browser doesn't actually know anything about non-visible columns and hence the tab can't go to them.
When you increase the number of visible columns (or don't set anything for visible column) you render al the columns on the client side and use the browser scrolling. Therefore the tab works.

Expanding text field in table

Hi,
I’m pretty inexperienced with Live Cycle and was hoping I could get some help using text fields within a table.
I’m creating a form with a table into which the user enters information. I’d like the row height in the table to adjust to the amount of text entered into the text field so as that if necessary the table will expand onto a subsequent page.
The table exists within a subform and the text fields exist with in the table. In searching this forum I seen talk of dynamic tables but not sure how to achieve this.
Any help would be much appreciated.
Thanks
Graeme

To make the textfields grow you need to select 'Expand to Fit' under height in the Layout tab. In terms of going onto another page you need to select 'Allow Page Breaks within Content' in the Object>Field tab and make sure your subform is flowed not positioned.

Check Code (PK) When type in to text field,Exist or not

Hi,
i want to create a Language Master.I have take two fields LAN_CODE and LAN_NAME in LANG_MASTER Table. Here LAN_CODE is my Primary Key.
Now problem is when i type New LAN_CODE into Text Field Item and when i press Submit then it show me Error LAN_CODE Already Exist .
I need when i Type New LAN_CODE in Language Code TEXT FIELD then it should be check LAN_CODE Already Exist or not. if LAN_CODE Already Exist .then Cursor should not point (go) to Next Item.
My LAN_CODE Formate is
HIE-------Hindi
ENG------English
PAN------PANJABI
How can i check code when i type new code in to text field.Code Exist or Not.
How can i do this.
Thanks
Vedant
Edited by: Vedant on Jun 2, 2011 11:39 PM

Hi Paul ,
Thanks to reply me.
I have created a form with report and
i did apply that code ,It's working BUt Now Problem is when i press TAB then it's show me error Value Already Exit But Here it's change into APPLY_CHANGE Mode .
How can i prevent to page not in Apply Change Mode.
i want when TAB Press and check for Duplicate VAlue it should be in Create New Language Mode.
How can i do this.
Thanks
Vedant
Edited by: Vedant on Jun 5, 2011 11:19 PM

Table in pages need text in a column to carryover to next page.

I created a table in pages and as I type, I have exceeded the length of the column. The text is hidden, how do I get it to carry over to the next page. I tired "insert" but the split column option is not available........ thank you

Problem described and answered several times.
A cell can't cross pages boundaries.
Yvan KOENIG (VALLAURIS, France) samedi 16 juillet 2011 17:31:25
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please :
Search for questions similar to your own
before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Header Area of Table is not printing on Next Page in SMARTFORM

Hi All,
I am facing one problem while Developing a smartform for Delivery.
I want the same data to be copied to the Next page which is coming on first page. I copied the Main window to Next page with all the details but the Header of the Table is not printing on the Next(Second) page.
Please help me out regarding this...
Thanks in advance for your help....
Thanks & Regards,
Digamber

Hi,
If you are talking about the table (which you created in the main window) and you want the header of the table to be printed on the next page. Is it because of overflowing that's why its printed to the next page?
If yes, the header cannot be printout out.
Just for your information. If you want a window in the first page to be copied to all subsequence pages, set the window type to be copies window.
Hope it helps.

Sale Order Item Level Text Field which table and field

Hi,
Thanks for your prompt reply and best solution.
Can you please tell me one more thing, in sale order at item level the TEXT Field maintaining by user at transaction level now they want that field in one of the report, so can you please tell what is the table and field where i will get this sale order item level text details.

Hello,
is this going to work for item level text as well.
can you tell how to proceed with this functional module
or is there any other thing required.Please elaborate to
understand better way.
You can check out two table in respect to Sales TEXT i.e. STXH (STXD SAPscript text file header) and STXL(SAPscript text file lines).
The best approach of tracing out the Text in respect to Sales Order would be to use the Function module READ_TEXT and put this FM in SE37 and execute with the following parameter.
Client
Text ID of text to be read
Language of text to be read
Name of text to be read
Object of text to be read
Archive handle
Text catalog local
When you are essentially looking to read item level Text with respect to Sales Order then your Text OBject would be VBBP.
Regards,
Sarthak

Text field in table not overflowing onto next page!

Similar Messages

Maybe you are looking for