Requirement to have 3 display output

May I know what is the extra device that i need to have 3 display output if I'm buying iMac? Because I'm considering to buy iMac, but I would like to have three display output. Thank you

https://discussions.apple.com/thread/3104140
http://www.engadget.com/2011/05/03/apple-imac-hands-on-with-dual-30-inch-display s-video/

Similar Messages

I have the requirment, i have to display the equipment object type.

Hi,
i have to display data from the following fields, the equipment object type(EQUI_EQART), materil numb(EQUI-MATNR),asset number(EQUI-ANLNR), placement date(AFKO-GLTRP),
QMEL-VBELN, VBAP-NEPR, IHPA-PARNR, KNA1-NAME1, KNA1-STRAS, KNA1-KATR6,
KNVP-PARVW, KNVV-VKBUR,
JCDS-STAT.
how can i map the field(GLTRP) from AFKO with other tables.
Kindly send me as soon as possible.

Hi:
Declare 2 variables in page attribute like tdate/ydate type d
in intilization
assign like
tdate = sy-datum
ydate = sy-datum-1.
in page attribute like
      <tr><td>
      <htmlb:label for       = "ip_doj"
                   labelType = "MEDIUM"
                   text      = "Current Date (DD.MM.YYYY)" />
      </td>
                              <td>
      <htmlb:inputField id         = "tdate"
                        required   = "TRUE"
                        doValidate = "TRUE"
                        type       = "DATE"
                        showHelp   = "TRUE"
                        size       = "10"
                        maxlength = "10" />
      </td></tr>
      <tr><td>
      <htmlb:label for       = "ip_doj"
                   labelType = "MEDIUM"
                   text      = "Yesterday Date (DD.MM.YYYY)" />
      </td>
                              <td>
      <htmlb:inputField id         = "ydate"
                        required   = "TRUE"
                        doValidate = "TRUE"
                        type       = "DATE"
                        showHelp   = "TRUE"
                        size       = "10"
                        maxlength = "10" />
      </td></tr>
Regards
Shashi

To Display Output in Grid ALV with change of some field display total with

Hi Masters,
I m working on ALV in which i have to display output with the following format.
Header
"Some String"                                                             date/time
User:XYZ01       page 1
Line
1st field    2nd    3rd     4th       5th   6th    7th   8th   9th 10th field
x               y       z        A        B     C       D     E      F       G
BLANK..............................................................................
                      "total 3rd+4TH"           P        Q     R      S        T
same thing for every change of 4th field .
So the problem is with inserting the line with string "Total of 3rd+4th" in the output .
Can Anyone help me out?
Thanks ,
Varlani Amit

Hi,
Use control-break statement ON-CHANGE for the 4th field, and do the changes.
regards,
sri

Oaf requirement:have to display the order number but save the order id

this is a standard practice with d2k forms.i have a requirement where in i have to store the order id in the table but have to display the user with the corresponding order numbr at all times..can any1 please help me with this***urgent***

Hooray! I get to post my daily reply saying the following:
OA Framework is so radically different than just straight Java coding that Oracle has a separate [url http://forums.oracle.com/forums/forum.jspa?forumID=210] forum for OA Framework.
That is the appropriate place for this question.

Sql to display output in Horizontal view

Experts,
I need to display the sql query output in horizontal manner. Below I have given the script.
create table TestTable (id number, name varchar2(10))
insert into TestTable values (1, 'John')
insert into TestTable values (2, 'Mckensy')
insert into TestTable values (3, 'Valneech')
insert into TestTable values (4, 'Zeebra')
commit
select * from TestTable
Getting output in Vertical View.
ID Name
1 John
2 Mckensy
3 Valneech
4 Zeebra
But for my requirement, I need to display in horizontal manner.
ID 1 2 3 4
Name John Mckensy Valneech Zeebra

Try this,
SELECT SYS_CONNECT_BY_PATH(ID,' '), SYS_CONNECT_BY_PATH(name, ' ') "Name"
FROM testtable
where level=(select count(*) from testtable)
START WITH id=1
coNNECT BY PRIOR id+1 = id;Rgds,
Ahmer
N.B.: To make a good reputation on forums, and if you want that your questions will be answered timely. Kindly adopt the habit of marking your questions closed as soon as you get the answer. and be courteous to the people who trying to help.

How to display output only sort format in alv

Hi Experts,
I have one problem in alv output display. I'm developing alv report for orders raised during the period.I want to display each order wise value(netwr) and order quatity (kwmeng) . i set 8 radio buttons one radio btn click then i want output ex.in grid display click on sort then each order wise calculate the value and quantity . that particular data to display when click on radio button.
ex:click on sort in grid display.
(branch) (order no)     (quantity)   (value)                        (BSTNK)
AMUM     0000003354     2             10                                    3,271
AMUM     0000003354     1              10                                    6,542
                                                   (above qty sum 2+1=3)
(SUM) =   AMUM       0000003354            3                       20            9,813
HIP2         0000003362     2           5     17,810
HIP2             0000003362     1          5     23,075
(sum) = HIP2          0000003362                 10           40,885
i display output in alv griddisplay.client asking one rb put in selection screen i want output like above only sum col.
when i click one radio button output is come like (sum) above.
Please help me.
Thanks & Regards,
Balakrishna Gajula

hi you need to use sortinfo for your requirement.
ie see the below code.
"declare sortinfo at data declaration
data:   wa_sort     type slis_sortinfo_alv,      "''' add this
            layout      type slis_layout_alv.          "add this
""make the below changes in your fieldcat
wa_fieldcat-tabname   = 'FINAL'.
wa_fieldcat-seltext_m = 'Td - Rvdt'.
wa_fieldcat-fieldname = 'QUANTITY'.
wa_fieldcat-do_sum    = 'X'.          """"""add this to your *QUANTITY field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
wa_fieldcat-tabname   = 'FINAL'.
wa_fieldcat-seltext_m = 'temp''.
wa_fieldcat-fieldname = 'VALUE'.
wa_fieldcat-do_sum    = 'X'.             """"""add this to your *VALUE field*
append wa_fieldcat to it_fieldcat.
clear wa_fieldcat.
""""" you need to add this after workarea of fieldcat
wa_sort-fieldname = 'BRANCH'. " Here Branch indicates the fieldname
wa_sort-subtot    = 'X'.
append wa_sort to it_sort.
clear wa_sort.
wa_sort-fieldname = 'ORDERNO'.
append wa_sort to it_sort.
clear wa_sort.
" in your alv fm add sortinfo
call function 'REUSE_ALV_GRID_DISPLAY'
    exporting
      i_callback_program = sy-cprog
      is_layout          = layout
      it_fieldcat        = it_fieldcat
      it_sort            = it_sort                   """""""""add this
    tables
      t_outtab           = final                   " your internal table name
    exceptions
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
This solves your purpose.
Regards,
koolspy.

How can I operate multi displays on my Imac 21.5 quad core 2.5 and have each display function independently?

how can I operate multi displays on my Imac 21.5 quad core 2.5 using Lion and have each display function independently?

Below are some converters/adapters to look at. If these look like they may work:
USB 2.0 to HDMI Audio Video 1080P Adapter for Windows and Macbook
Matrox DualHead2Go D2G-A2D-IF (or look here)
These should allow you to run multiple displays in extended display mode. Note that these use HDMI as an output so you would need some additional adapter to conver HDMI to whatever your displays require. Of course these suggestions are all academic if such an adapter doesn't exist.
Update:
I just reread your last post and I am confused. Is it only your TV that you are trying to run in extended display mode? I thought you wanted more than two displays. If only the TV it should just work if you are not using mirrored displays. Your Displays Arrangement tab should show both your main screen (one with the little whith menu bar) and the TV. Set the proper resolution and refresh rate for the TV using it's Displays preference window. That is all you need to basically do (ignoring overscan/underscan problems).
Note, if you are using Lion then I have heard that when using full screen mode in Lion additional screens show nothing.

I use iwires to connect macbook to lg tv to watch netflix.How do I increase screen size on tv.I have tried display options on settings- not working

I use iwires to connect macbook to lg tv to watch netflix.How do you increase screen size on rv.I have tried display settings ,but not working

I would guess that the HDMI port on your mac is for output only - no input, and that's what your'e attempting to do when you attach the mac to your xbox. I looked in Mactracker and it lists the HDMI port as video output for both the 13" Retina MacBook Pro and the 15" Retina MacBook Pro (your post didn't say which one you have), so looks like that is the issue..

Does SAP have report display the history of dunning

Dear Expert,
Would like to seek for your help,Does SAP have report display the history of dunning for AR module and what are the T-code and report?
Please help.
Regards,
KH

Hi
Dunning status is updated in customer master,you can get the required data from Table LFB5
hope this will help to some extent
Thanks
Kameshwar Rao

JavaHelp 1.0 is required to view the JavaHelp output?????

Hi All,
I'm getting this dialog after I have generated the JavaHelp.
"JavaHelp 1.0 is required to view the JavaHelp output. Please
install the latest version of JavaHelp"
But I have allready installed this "C:\jh1.1.3" and inserted
these 2 System variables "JAVAHELP_HOME" - "C:\jh1.1.3" and
"JHHOME" - "C:\jh1.1.3".
I have allso installed "j2sdk1.4.1_01".
What else needs to be done?
BR
Thomas

I faintly remember a problem with Robohelp and JH1.1.3 a
couple of years ago, I don't know if this was ever resolved.
I have found the following that might help.
Click Here
Just found a link to the following Forum thread on Peter
Grainge's site
Thread
here
Hope this helps.
Brian

Plz help me, no display output during boot up of 715 workstation

now i have a HP 715 model workstation,today, conneted hp monitor..but can't display output during system boot up so i tried solve this problem,1)changed battery2)removed HDD after reboot system and press ESC key => now can't use Keyboard..not working key board3)Press Tap key.. Just i think, this problem is system configulation problem. not monitor problem..so i found internet website..but now i can not change configulation who know this problem.plz help me

one question in html submit the reslut stored jdbc that value shows barchartAll your base are belong to us!
You know, while I understand that English isn't your first language (neither is it mine) and there's no need to be perfect: if you can't write an understandable post yourself, consider asking someone to do it for you.

Display output on LED TV from DisplayPort on zbook 15

Hi,
I have a notebook zbook 15 Product D5H42AV.
On this laptop I have a DisplayPort output and a Thunderbolt output.
I have bought on the market an adapter (not from HP) from DisplayPort to HDMI.
I cannot get the output displayed on my LED TV (full HD).
Could it be that the adapter supports only DisplayPort 1.1 and not 1.2?
If I want to see the screen on TV, shall I use the a DisplayPort adapter or Thunderbolt adapter?
Is there any way to troubleshoot why I cannot display the output on TV from my laptop?
This question was solved.
View Solution.

Hi Provost,
thank you for your feedback. I have tried but still not working.
According to this document:
http://h20195.www2.hp.com/V2/GetPDF.aspx/4AA5-2657ENW
it seems that I should connect the HDMI to DisplayPort:
*DisplayPort connector supports a DisplayPort display, a HDMI display with an DP-to-HDMI dongle, a VGA display with a DP-to-VGA dongle, or a DVI display with a DP-to-DVI dongle.
I have a Samsung TV Series 6 with 4 different HDMI input:
HDMI1 (STB)
HDMI2 (ARC)
HDMI3
HDMI4 (DVI)
I have tried with all of them unsuccessfully. I'm afraid that my DP-to-HDMI dongle that I bought on a local internet shop and it's made in China is somehow not fully compatible with my zbook.
Maybe I should buy the original one from HP.
When I connect the laptop to TV I saw that somehow the TV see that the port is connected but it says "No Signal".
Also pressing F4 and checking with the Screen Resolution windows (in Windows 7) shows the second display as VGA. So it looks it does not detect the DisplayPort.
Is it possible that the port must be enabled (bios or Windows setting) or that I miss some drivers?
Checking on the Internet I found that there are some adapter that can connect also to the thunderbolt port:
https://m.cdw.com/shop/products/StarTech.com-Mini-DisplayPort-to-HDMI-Video-Adapter-Converter/197508...
The product is described as compatible with zbook 15
However the official HP site sell a dongle only for the DisplayPort:
http://shopping1.hp.com/is-bin/INTERSHOP.enfinity/WFS/WW-USSMBPublicStore-Site/en_US/-/USD/ViewProdu...
The adapter I'm using can be seen in this page:
http://media.extron.com/download/files/userman/68-1887-01_B.pdf
It's the "DisplayPort Male to HDMIF Active Adapter" (top right code 26-655-01).
I'm a bit confused now. I don't know if I have to buy a different adapter or if there is a way to troubleshoot my problem and see if the DisplayPort is enabled and working on my laptop.
Regards.
Alberto

Turn off external display output?

I've bought a nice big LCD TV mainly for consoles. Because I have it next to my iMac i've also connected that to the TV using a mini-dvi adapter and a dvi-hdmi cable.
It works great but I only want to use it for playing downloaded video and the like on the big tv.
When I'm not using it I want my iMac to free up the resources it must be using to achieve screen spanning but I cannot figure out a way to tell the iMac to disable external display output.
I've tried display mirroring figuring that it won't be eating up video RAM, but it causes page tearing on my mac when dragging windows around for example.
Even when the TV is unplugged from the mains the mac seems to be outputting to the dvi out, the only way to stop it is the yank the mini-dvi connecter from the back.
Are there any hacks or utilities that can manually turn dvi support on and off?

Hello Mark
I'm using a 27" flat screen TV, mini DVI and 12' S-Video cable.
Mostly I watch DVD movies on that Display while working at the iMac's 17" it's also great for iPhoto Slideshows and PowerPoint.
Not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just turn it off or change the channel.
I tend to stay away from mirroring for the same reasons, but also because the TV's across the room.
Again not to worry the TV supports it's own display and all you are doing is sending a signal to it's video card. Just leave it connected up to prevent damage to DVI port, Adapter and cable. "yank not"
Just be sure to gather up all your windows back to the iMac Display befor shutting off or changing the channel.
Dennis
17" iMac Intel Core Duo 1.5GB Ram Mac OS X (10.4.9) Maxtor 300GB FireWire Creative Inspire 2.1 2G Nano

Display Output similar to SPRO (IMG)

Hi Experts,
Can we develop a display output similar to the view which we have in SPRO (IMG).
Any Function Module or Sample Program.
Regards,
Abhijit G. Borkar

Thanx David,
Can u help tell me the difference between the Transaction Code: SHI3 & SE43 & SE43N.
Since they look similar to what you have suggested.
Regards,
Abhijit G. Borkar

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Requirement to have 3 display output

Similar Messages

Maybe you are looking for