RES ET - " SOLUTION_MANAGER" Transaction launching screen

In general, When i browse thru " SOLUTION_MANAGER" transaction. The last screen / patch in the transaction is my first screen when i execurte the " SOLUTION_MANAGER" transaction.
Requirement : When ever i run transaction " SOLUTION_MANAGER" - That should bring first screen "Solutions Overview"
Can we acheive or not....This demand is to avoid some operational issues at our end.
Rgds

Hi,
Actually the tcode Solution_Manager will lead you to the last screen of your previous login. Select the solution overview from the drop down list box and then logoff so that u will be entering into the solution overview screen the next time u login.
Regards,
Varadharajan M

Similar Messages

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Transaction launcher displaying blank screen (Empty without any fields)

Hi Experts,
                   Recently we have done the upgardation from CRM 2007 to CRM 7.0. In our old version we have configured Transaction launcher and everything was fine. But we are facing an issue with transaction launcher calls in our new system. Apart from the existing TL configuration below are the steps did in the new system (after upgradation).
1. Activated the Webgui ITS service from the path sap/bc/gui/sap/its/webgui in the remote system (ERP) through SICF.
2.Published the internet service SHUFFLER, SYSTEM, WEBGUI through SE80 in the remote system.
3.checked the configuration for logical system in transaction CRMS_IC_CROSS_SYS and the URL of ITS is in the form of
   http://<host>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXEokcode=ICEECUTE
Till this part every thing looks fine and if execute the URL in the browser, it is taking me to the ERP system login screen and i am able navigate to any transaction.
But if i login to CRM interaction center and clicking on the TL links, its not displaying any login screen( Remote system) and not even displaying any message or any fields. Its just displaying a blank screen (White Screen) in the same window.
Please provide your valuable suggestion to resolve this issue. Thanks
Regards,
Laxman.P

Hi,
     sorry, it was a typogrpahical error in my query. I have mentioned the correct link in my customization
       http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE
Regards,
Laxman.P

ERP Transaction Launcher leads to blank screen

Hello
I followed SAP notes and various threads here at SDN to setup launch of ERP transactions from CRM webclient.
In principle I have applied SAP notes on ERP and CRM for IC_LTX and IC_LTXE transaction codes and also did all steps as per enclosed blog,
/people/vikash.krishna/blog/2008/09/23/crm-2007-how-to--2-a-transaction-launcher
However when I launch the transaction, I get SAP Logon prompt from ERP server as expected. When I enter credentials correctly, I get an embedded window with SAP GUI menu (only two options Menu and System and field to enter Tcode) and empty screen area .
Now if I enter he tcode in opened empty window say "/nva03" , I am able to start the transaction.
Any clues on why the transaction does not launch correctly?
Thanks

Hi,
I get the same problem, but it gets back to CRM. I think the problem is that http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?*transaction=IC_LTXE*&okcode=ICEXECUTE
transaction=IC_ICLTXE should be replaced by the transaction ex: VA01 and it is not.
Tell me if you have any clue.
Tx
Thomas

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

Using the transaction launcher to call a BOR method to display a PDF

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
In CRM 4, in the collection factsheet assignment block, the link was coded into an XSLT which is then displayed in the GUI and you would have a clickable link for a pdf file in a row in a table. That link would be as follows:
         <xsl:variable name="ev_key">SAPEVENT:?OBJTYPE=<xsl:value-of select="attributes/OBJTYPE"/>&OBJKEY=<xsl:value-of select="@KEY"/>&LOGSYS=<xsl:value-of select="attributes/LOGSYS"/></xsl:variable>
             <a href="{$ev_key}"></a>
This will get the file in IXOS and display it, in CRM 4. In CRM 7, the link is an icon in every line of an assignment block.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block and have it open? If so, how? Transaction launcher, function modules (like ARCHIVOBJECT_DISPLAY) in the OPTA package? (the package for all IXOS related function modules..)
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system?? or sapevent:xxx?
3) Do we have to configure a transaction in the IMG to be launched with the attributes listed there? Do we have to link it to any classes/ objects?
4) Do we have to have the code to the logical link dynamically to call the right PDF for each table line? Is it right to put this code in my event handler?? Usually transaction launchers are just in the nav bar.....
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG for the transaction launcher, and have the attributes defined for my BOR object that I would call, and pass it different attributes (eg. objtype, objkey, logsys...) and then return the PDF and display it in the UI in a new browser window by itself. (There is a BOR method for my BOR object named 'display_pdf'!!!!)
What do you think would be the optimal solution here? Does my theory of calling a BOR object with a transaction launcher to display a PDF make ANY sense whatsoever???
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante
Edited by: Jonathan Laplante on Jul 2, 2011 4:50 AM

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
   iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

ITS WebGUI in CRM(By transaction launcher )

Hi all,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.My CRM Version is 7.0 EHP1.
The webgui service in the tx sicf have been a test, after login in, a blank picture with a red x "PLease wait..." is also remaining.
Can anyone help?
Thanks in advanced.

Lei Cao,
Want to check if this issue is resolved. I have the same problem where I am getting 'please wait" with red x screen when I configured transaction launcher from crm web ui.
Did you ever get this resolved? If so please share your approach ? And is this authorization related?
Rajani

Transaction Launcher to open an ECC transaction

Hi Experts,
My requirement is to launch an ECC transaction VA01 from CRM Interaction center.
1. It should open the VA01 screen with the Order Type populated, say for example 'OR'.
2. When I click on Continue, it should show the creation screen with the sold to party defaulted as the confirmed BP ID.
I have done the folowing steps till now.
1. I have created an ECC Object as a copy of Object TSTC. I have implemented the method Execute( Synchronous option checked). I have added two parameters to the execute method one called as SoldToParty with reference to KUAGV-KUNNR and the other SalesDocumentType with reference to VBAK-AUART.
2. I generated, implemented and released this object.
3. In the CRM system, I have configured a Transaction Launcher with reference to this BOR Object. I gave the parameter for Object Key as VA01 and the SoldToParty as the current customer and I have hard coded the value for the SalesDocumentType.
4. I have configured the Logical Links and added it to the work center.
Now when I click on the logical link, it opens up the ECC transaction but nothing is defaulted in the VA01 screen. I debugged the PREPARE DATA FLOW METHOD. The correct parameters are passed.
Why am I not able to see the defaulted parameters in my transaction. Please help. Thanks in advance
Regards,
Razina

Hi Raman,
The links talk about generic tranaction launcher. My requirementis to default some values in the ECC transaction.
I found this link with the steps to default values:
[Re: ITS VA01 or other ERP transaction]
It is said that "Redefine the method EXECUTE to read these parameters and perform the required action. In your case you could call the transaction using a BDC table, or set the SPA/GPA parameters before calling VA01".
I am not sure how to do this.Do you have an example of the EXECUTE method?
Thanks.
Razina

Transaction Launcher to call custom transaction

Hi ,
I have a requirement where i need to call a custom transaction using transaction launcher. I am able to successfully launch the transaction. But i need to pass a value to the transaction.
For eg. If i am calling a custom report transaction which has a selection screen field 'FORMNAME' as a parameter i need to pass the name of the form to the transaction. I am not able to pass that value. Can any one help me onthis.
I have seen all the posts , but could not get any help on how to set the value for custom transaction. I can see how it is done for standard transaction.
Regards
Ansari

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

Parameter BP (CRM to R3) for BOR based transaction launcher

Hi,
Our requirement is to display R3 sales order(VA03) through IC webclient. The BP no of the confirmed business partner should be shown as default in the Sold to party field of VA03 transactn screen.
Steps followed -
1. Created a BOR transaction launcher with 'BUS2032', method - display.
   Selected the Import parameter name - ICWEBCLIENTBORKEYPARAMETER.
   I could not find any Import parameter value corresp to BP number, so left the Import Parameter value as blank.
2. In the trans launcher generated class, method 'PREPARE_DATA_FLOW' added the following code -
CALL METHOD __gdc->get_entity_attribute_as_value
    EXPORTING
      path = '//currentCustomer/BP_NUMBER'
    IMPORTING
      value = lv_bpid.
PASS PARAMETERS TO THE BOR OBJECT FOR PROCESSING IN THE ECC
me->set_container_data(
iv_name = 'RV45S-KUNNR'
iv_value = lv_bpid ).
It launches the VA03 screen but the BP no is not passed to the sold to party field.
Please provide your inputs. Anything helpful would be rewarded.
Thanks,
Akanksha

Hi Jan,
Thanks for this information.
I passed the BP no in 'icwebclientborkeyparameter' and then using the below code in prepare_data_flow method-
me->set_container_object(
   iv_name        = '<MAINOBJ>'
   iv_object_key = icwebclientborkeyparameter
   iv_object_type = gv_bortype ).
But it still doesnt work.
Do i need to create a Z copy of BOR object 'BUS2032' and then do some enhancement in BOR object - display method also?
Regards,
Ak

Parameter passing (CRM to R3) for BOR based transaction launcher

Hi All,
Our requirement is to create R3 sales order through IC webclient. The details of the business partner should be shown as the defaults in the R3 sales order creation screen.
To achieve this we:
1. Created link in Navigation Profile
2. Created transaction launcher profile (using the above created navigation link) and transaction launcher type is BOR based.
3. Transaction parameters (in the handler class method IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW) are set to the business partner.
When we launch the VA01 transaction through IC webclient, we are able to see the Sales order initial screen.
We are facing the following problems.
1. We could not skip the initial screen in the VA01 transaction.
2. The transaction parameters are not passed to the R3 Sales order creation transaction. While debugging, we could see that the business partner number is correctly assigned to the transaction parameter but this value is not sent to the R3 system.
Are we missing something for passing the parameters from CRM system to R3?
Please help.
Points will be awarded.
Thanks,
Chan

Hi Chan
Don't know if this question has been answered yet, but have a look at this document: [http://www.consnet.co.za/documents/R3OrderIntegration.pdf]
This document is for WinClient Integration, but you can create your IC WebClient launch transaction for the BOR Object easily enough.
There may be more elegant ways of doing the above, such as doing everything R/3 on BUS2032 and using delegation of the BOR Object, but this document is the most detailed explanation I have.
Regards
Johan
Edited by: Johan Van Zijl on Jan 15, 2008 6:25 AM - I have fixed the link to the file

Transaction launcher not working for custom business role in WEB UI

Hi Experts,
we have maintained a link for activity reports in web Ui which triggers a program Z_CRM_TIME_REPORT . we have maintained the logical links and assigned them to the custom business role. when we run the program in SE38 in GUI its working fine but we are facing the problem when we click the link in WEB UI we get a different screen related to BP and not the activity report.Kindly suggest what are the configuration need to be tested.
Thanking you,
Deepa

My guess would be that the parameter stated in the logical link (navigation bar customizing) that you use is incorrect. This should be the name of the transaction launcher definition you have maintained.
Otherwise, check the transaction launcher wizard to see that the report is maintained correctly.
Hope this helps.
Regards,
Pieter Rijlaarsdam

Transaction launcher: open URL in new window

Dear all,
I know many threads have already been posted about "stateful URL" created with transaction launcher, that open a new browser window AND navigate to an empty screen with the following text (which is more than useless):
"The requested page has been opened in a new window, please press back button to go back to the last page."
Carsteen gave some useful hints already in the following thread:
Transaction Launcher in a new window
But maybe someone found something new since then... At the moment I'm thinking about "simulating" a clic on the BACK button (like mentioned in this useless message), with something like :
DATA:
history TYPE REF TO if_bsp_wd_history_manager_disp.
history = view_manager->get_history_manager_display( ).
history->go_back( ).
Any better idea ?
Thanks & regards,
Nicolas Busson.

Hi Nicolas !
How are you? :-)
I assume that since then you have found a way to fix your issue, but as the post is not answered I can tell you that SAP has taken into account this point in SAP 702 EHP1, with a new attribute in the customizing of the transaction launcher called "Keep Work area" :
Keep Work Area When Opening Launch Transaction in New Window
This indicator defines whether the work area content is kept when you open a launch transaction in a new window.
Use
If this indicator is not set and a launch transaction opens in a new window, then the main window loads the base page of the transaction launcher into the work area.
If this indicator is set and a launch transaction opens in a new window, then the main window keeps its current content in the work area.
Dependencies
This indicator is only evaluated if you have also set the indicator for using a new window.
Imed.

Transaction Launcher - TCode Authorization Issue for ERP transaction

We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher. Everything has been set up properly and the transaction appears in the nav bar. I am running it to launch a new window. When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
*"You do not have authorization to view transaction ZSD_IC".*
Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
Does this have anything to do with IC_LTXE? Is there anything special i need to do to assign proper authorization to this user.
Thanks,
jeremy

Hello Jeremy,
We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
In order to execute transactions from TL we have copied object TSTC to ZTSTC in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
In order to correct the fail we have implemented these notes, but the problem still remains.
0001224663 Launch of Front Office with Transaction Launcher fails
0001263716 Launching Front Office Process using Transaction Launcher
Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
Thank you very much in advance.
Best regards.

Transaction launcher-'Transaction execute is unknown'

Hi,
I am trying to launch transaction BP in IC web client
I have configured the launcher wizard and entered the URL in transaction 'CRMC_IC_CROSS_SYS . I have added the navigation link but when i click on this link I get SAP initial screen ( easy access) instead of BP screen with an error 'Transaction execute is unknown'
I directly want to navigate to BP, can someone please help here or point me to some useful documentation. My mail id is [email protected]
Thanks

Hello Amit,
I think you made a mistake in your transaction launcher wizard.
If you want an external url to be displayed you should choose URL and not BOR method in the trans launch wizard. The error message 'Transaction execute is unknown' means that you have selected BOR object in the wizard. When selecting BOR object it will automatically look for a EXECUTE methode in the business object. (Or, if you do wanted to execute a BOR object you have picked the wrong one)
Run through the wizard again and make sure you have entered the correct values.
Reward points if useful,
Kind regards,
Joost

RES ET - " SOLUTION_MANAGER" Transaction launching screen

Similar Messages

Maybe you are looking for