Reschduling the maint plan

Dear Friends
I would like to have some idea. Basically our maint plans are running back ground for order generation in automatic. But sometimes it is getting stopped by unknown reason.example last week call is stopped.
Now the users are reactivating
the by IP30. But after the job release the system producing two orders 1. past order is falling on today ent (job executed date) date 2. future order date. Here the stopped schdule order should not create on today date. The future order is acceptable .
How to control the stopped schdule falling on today date?

Hey Thenna,
Can you explain with example dates.
Sundar

Similar Messages

  • Maint plan generating call  before cycle.

    Hi
    I created single strategy plan for a fleet equipment
    the cycle maintained is 250 mi   (At 250 miles i need a notification)
    The last counter reading is 200 mi only.
    But when i run IP30 by giving the maint plan only  it creating a notification.
    If i execute IP30 again also it is generating notification.
    Why it is creating notification before 250 mile is reached ?

    Hi,
    Annual Estimate should be maintained in case of even Measurement document is not created, but based on experience, if Maintenance Call object needs to be generated.
    Also Annual Estimate is optional field, you can leave blank. While creating Maintenance Plan by assigning that Measuring Point, it will you Information message as Annual Estimate has not been maintained. You can skip that message & go with scheduling based on Measurement Document.
    As you maintain 10000 in Annual Estimare, notification has been created immediately. Calculation would be 10000 for 365 days. So for example cycle value is 500, then 20 call objects would be created once in 18.25 days.
    Annual estimate should be realistic. Also for your requirement, it is not required.
    I hope its clear now.
    Regards,
    Maheswaran.
    Edited by: Maheswaran.K on Apr 28, 2011 12:38 PM

  • What is the use of OR and AND functions in counter based maint plan

    Hi
    I want to create a counter based maintenance plan...
    I entered the measurement reading for the counter, reading is 4000 hrs
    IN IP43
    I created the counter plan with cycle as 6000 hrs. Once the document reaches 6000 order will be created. While creating the maintenance plan, in the maintenance schedule parameters, i check there is OR and AND functions avaliable...
    I know the basic use of both the functions..
    But what is the significance in the maintenance plan....
    Will it give any effect, between the schedule date and measurement docu entries...
    Since i need to maintain like... once the counter reaches 6000 hrs only order should be created.. it should not create once the date as been reached... since due to present condition, i am not running the DG....
    Give ur inputs
    - Pithan

    Hi
    Thank you for your reply
    As you said...
    If you want order to be created only after certain Hrs to be reached to cycle value then you may opt for single cycle or strategy cycle
    can u explain how to do it...
    In single cycle or stratergy... if u schedule the plan itself, the dates will be populated.. it will calculate with respect to the annual reading we have entered in the measurement document...
    My DG overhaul to be taken in every 6000 hrs... i create a plan... i have given the annual reading as 8000 hrs... if i schedule the plan for 5 yrs... wat will be the call objects...
    Then i am running the DG for 3 hours a day... my annual running hrs will be 1000 hours.. but my order will be released since it has crossed the dates...
    how to control... is it possible to do it in IP43 with multiple counter...
    How to do this ?
    Cna u explain
    - Pithan

  • Sort field in maint.plan&in ip30

    hi
    does some one implementd sort field use in img of maint plan
    and does dead line monitoring in ip3o
    whar are the benifits or scope
    ponts will be rewarded

    Hi,
    The sort field is used to 'sort' plans according to different criteria that you need to configure.
    For e.g. If a company has 200 Maintenance plans and you want to know all the plans valid for a certain division of the company. You can have these plans sorted as per company division.
    You will need to configure the sort fields in IMG. If company name is COMP, then sort fields may be
    COMPDIV1, COMPDIV2 etc (just an example).
    For scheduling maintenance plans indvidually IP10 may be used. However in real scenarios. the transaction IP30 is used to do a scheduling of all the maintenance plans together.
    Thanks,
    KF

  • How to display field SZAEH (Start Counter Reading) in IP01 for Maint Plan

    Please let me know how i can configure field SZAEH (Start Counter Reading)  to be displayed for data entry in IP01 for Maint Plan creation. I tried Tcode OIW0 but cou;dn't succeed.
    ALl the help will be appreciated

    Jain,
      The start counter reading will automatically comeup in the scheduling parameter screen , if the maintenance plan is tied to a  counter. Isnt this not coming up?
    Regards
    Narasimhan

  • Hiding Field in Maint Plan

    Hi All,
    I have to hide the business area field in Maint plan screen.
    Kindly suggest.
    Thanks,
    Prabhu

    Hi,
    Thanks.........
    I have to hide the field while creating a maint plan (IP01) with call object as maint order.
    While creating a maint plan with Notification as a call object, business area field doesn't appear in the screen.
    Kindly suggest.
    Prabhu

  • Completion requirement tick in maint plan

    hi
    requirement: when maint.pan is scheduled by ip10 then if in maint.plan header the completetion requirement tick is made.then irrespecive of that tick ip10 should generate orders but if earlier order is delayed by "x" days then next order should shift accordingly by "x" days
    pls guide how to map the scenario
    Please check you inbox for information from me
    -Paul (Moderator)
    Edited by: Paul Meehan on Feb 22, 2012 2:12 PM

    Hello,
    You have to remove completion required check box as it prevents the generation of work order until unless last work order have status TECO.I will  suggest to use the FIXED call option in IP10 to delay the call as per your requirement if you dont want
    to remove the check box for completion required.
    Regards,
    Rakesh

  • Preventive Maint Plan Pending List

    How to display the Preventive Maint Plan Pending List with column having maint plan,maint plan description,planning grp,functional location,plan date.

    Hello,
    Did you try IP16 ?
    Cheers !

  • Maint plan

    Hi All,
             In IP41 maint. plan description is made as mandatory i/p field. Where i could find setings in SPRO.

    this field is mandatory because the same text will be copied to maintenance order description once generated through maintenance plan
    Regards,
    E-Jad

  • PM- plant maint Prev-maint planning/ scheduling how ? change, add, etc

    Dears,
    appreciate your assistance.
    we are having many PM work order in same near by area for related equip/ amchines.  we like to generate one work order for all pms which are in limited area.  if we get it we shall beable to generate one work order rather than ten work orders. how we can do it.
    thanks
    Mansoor.

    dear Pushpa,
    ya it is for palnt maintenance and for "preventive maintenance" planning and scheduling jobs.
    u mean cover the equipments in equal number og maint-plans, cover all such plans in / under one maint-item.
    now we have in way that one maint plan has more than one maint-item, and we are getting many work orders may be equal to number of maint-items, but our maint engineers want that all those being done at same time, so why not we make one work-order - but it should maintain equipment history.
    i notice you are proposing opposit to what we have now.
    In your proposed way will the equipment hisotry will be maintained for each equipment, that PM was called on --, planned for -- and completed on -- has been done.

  • Store rep signed me up under the wrong plan and no one in customer service has fixed it in over a month

    I was bait and switched. I signed up under the pretense that I was getting the promotional rate of 40gb/$150 that was scheduled to end on November 5 2014.
    I walked  into a Verizon wireless store on November 4th with the intent to trade in my iPhone 5s which I was offered $350 trade in value and port over 2 of my lines with T-Mobile under the Verizon promotion. Once I was approved and offered my trade in I was told that the phones I was seeking to purchase from Verizon was not in stock and needed to be ordered, and delivered separately with the iPhone 6 being shipped out November 14 and the iPhone 6+ shipped November 21. Thomas, the Verizon wireless sales representative, also informed me that for me to get the promotional rate I would have to open the account with an active line before the 5th or I wouldn't be able to get the promotional rate since the phones would be delivered past the promotional date period. The sales representative insisted I should add an iPad that  was in stock at the store and I could leave the store with an active account and once my phones were delivered I would be all set to go with my promotional plan and devices. I had no need for an iPad but decided it was worth getting for the sake of the promotion.
    ON November 14 I recieved via FedEx a package containing not a iPhone 6 as promised, but a iPhone 6+. I called Verizon to activate the phone that was ported to my personal phone number, and didn't have my iPhone 6 that was set to port my out of state business line and cancel service with T-Mobile on the 14th of November. To say the least I was extremely upset for which I had no means of recieving business calls from North Carolina while I live in Florida. At that point I asked the Verizon customer care representative I had on the phone to see if they could see if there was a store that had the iphone 6 I ordered in stock so that I an could have a business phone the same day. He found a store that had it in stock and it happened to be the store I originally signed up at. I was told that it was in the color and storage capacity I had originally ordered and that I could pick it up at the store to complete my purchase with Verizon. Again, for the sake of having a business line I ran to the store and spoke with Thomas and explained the mix up. upon moving forward I was informed that they had an iPhone 6 in stock with the capacity I had requested but not the same color I had ordered. At that point I didn't care I just needed a phone and proceeded to activate the phone he had in stock And ported over my business line.
    After recieving a text from Verizon that I had consumed all of my data just days after I recieved my phones I called Verizon 611 from my phone and spoke to a customer care representative named Fallon, which informed me I was set up on the wrong plan and that she see's the notes that Thomas notated that I was subscribing for a 40gb plan and that she was going to send a  request I D # [removed] form to make the corrections and that there was no need for me to cancel service as I was within my cancelation period, again she insisted that there was no need to cancel and that the request would be granted and she would be calling me once my billing cycle reset and the corrections were made and she would credit my account based on the promotional rate. I NEVER RECIEVED A CALL FROM FALLON! Not even to be notified that the request was denied! I came to realize later in December when I recieved a $1200 bill that this wasn't resolved. I called customer service again and spoke with a gentleman that explained the request was denied and that this will be resolved after I explained what transpired. He assured me that he was going to expedite another request and he would be in contact with me within a few hours....... I'm still waiting for his call as well!
    I called again several times in the past few days and have spoken to several supervisors that promised to resolve this matter and call me back promptly........ Again, no one has called me back!
    December the 8th I spoke with a supervisor named Victoria which assured me she would get this resolved within the next 24 hours and gave me her direct number to reach her if I didn't hear from her [removed], again I haven't heard from her yet and I've made several attempts to reach her at her direct line to no avail.
    December the 9th I spoke with supervisor named Mike employee #[removed] in the Seattle call center, he appoligized for the mix up and that no one has called me back and that he would handle this matter and get back to me today December 10th....... Again no call..... I have spoken to 3 people today all which have made promises to call me back today within a few hours and none that have. I just got off the phone with a supervisor named Vanessa Jentfield at the Chicago call center and saw all the notations and assured me that there is no reason why this shouldn't be corrected and that she would be calling me back tonight or tomorrow. I will be sitting by the phone unless Verizon wireless decides to disconnect my service for non payment of $1200+.........
    I have filed a complaint giving a detailed explanation of what has transpired with the FCC as well as the FTC, my next step is to file a small claims lawsuit tomorrow morning with the state of Florida and see if Verizon finds a way to contact me then,I guess I will just have to wait and see.
    Personal information removed as required by the Verizon Wireless Terms of Service
    Message was edited by: Admin Moderator

    It was a good idea to file a complaint with the FCC, someone from Verizon will contact you by phone in an effort to  resolve your issue. I wouldn't suggest small claims court as they have not done anything illegal, (just bad customer service) and their contract with you is usually upheld, which in this case is not for the plan you want. The person contacting you likely has a little more pull, as the call centers can only uphold the written customer agreement made.

  • When I want to update my app a different account comes up now.  Wierd.  It's the family plan owners id...why is this happening and how do I fix it?

    Upon  wanting to update some of my apps, I now get prompted to login with the owner of the family plans login.
    I have my own account attached to this phone.  Why is this now happening and how do I return it to update my apps with my login ID?

    Did you by chance accidentally purchase these app with the different account? 
    Because all apps are tied to the apple id that was used to purchase it.
    You can also check settings - appstore - apple id - if it isn't your id, log out and log in with your id.

  • What is the table to get the all planned orders related to a sale order

    Hi,
    May i know what is the table to get the all planned orders related to a sale order. My scenario is make to order scenario. we can get my out put final product by completing the nearly 916 planned orders.(Like major assemble,sub assemble). From this scenario i want the total orders related to a sale order. ( The planned orders from sale order to sale order will change. i.e 1 sale order will have 916 planned orders and one sale orders will generate 920 like that will chage when running mrp.). Now i want to pick the total planned orders for a sale order in a report. please guide me.
    Regards,
    Mastan.

    Hi,
    Use the table PLAF... in this table pass the sale order no in the filed KDAUF and then execute...issue here is once the planned orders are converted production orders, these planned orders are deleted from the system....so you will not able to see them.....
    Thanks
    Kumar

  • Issue while saving the project plans into XML

    Hi,
    Could anyone of you please help me here.
    We are having one custom field(Type: Text) in the project level(Custom field name: ProjectComments) and end users are entering the data against this custom field more than 200 characters.
    The problem here is when we are saving the project plans into XML and opening the same file again thorugh MPP, the data for this custom field(ProjectComments)  is showing till 129 Characters only. Seems to be the data is truncating till 129 charachers.
    Could anyone suggest me how to resolve this issue without trucnating the characters in the custom fields.
    Thanks in advance!
    Regards,
    Venkat

    Hi,
    I cannot reproduce this issue with Project Pro 2010 SP2. Which SP do you have? How is configured your custom field?
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, MCP |

  • HT4847 I have two iCloud accounts, one with 10GB and one with 20GB...how can I merge them into the 20GB plan?

    I have two iCloud plans.  One with 10GB that backs up my 1Phone and iPad.  I also have a 20GB plan for my iMAC and MAC BookPro.  How can I merge them so that I only have one plan and one iCloud to manage?    My first instinct is to delete the one on my iPhone/iPad and add the iMac plan, but I don't want to do it without an expert opinion.

    No, accounts cannot be merged.  Am I an expert?  I only know what I've read here numerous times regarding merging of plans - the answer is always emphatically NO.  Since this is a user-to-user forum (Apple doesn't participate here), you'll have to do some searching about on this topic and either accept or reject the "common" advice.

Maybe you are looking for