Reschedule does not update schedule line after upgrade

Dear All,
After upgrade to ECC6.0, the reschedule does not update EKET any more but it update ekpo as usual.I debugged it , before the function module SD_BACKORDER_**_SAVE everything is ok.
I also checked the sap note for the new field in T161V.But When I choose other option about customzing. eket are updated every time when the reschdule program run.This will lead double delivery.
Do you have any suggestion？
Edited by: Edward on Feb 23, 2010 9:03 PM

Hi,
On the initial screen of V_V2
Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
Kapil

Similar Messages

Item does not match schedule line (program error)

Dear Experts,
I Transaction VA02/VA03 when i put Sales order number and try to get in to the system system through error and terminate the transaction
ERROR is "Item does not match schedule line (program error)" with Message no. V1427
when i check Table level and analyse thr Debuging i found that
Table VBAP line item 10 is missing and table VBEP line item 10 is there due to this miss match its shows above error
Question
Why and How it happen and how to fix this issue???
Best Regards
hanumant

Check Note 442831 - V1427: Item does not match schedule line (program error)
thanks
G. Lakshmipathi

Item does not match schedule line (program error) in sap

Dear Expert.
Greetings!
We are currently facing with this error (V1 427 item does not match schedule line (program error) in sap), when we open the sales order(VA02/03).
The error is occurring due inconsistency on the database tables, some Item is in table VBEP, but it is missing from table VBAP. This is what is causing the error message.
I checked various related notes - 442831 , 401463 , 389687 etc . These are quite old notes and I am in release ECC 6.0 .
Report SD_CONSISTENT_CHECK_EXT and SD_CONSISTENT_CHECK are already available.
Bapi BAPI_SD_SALES is also active.
Please let me know if anybody has any idea on the same.
regards
Praveen

Hi,
Refer the KBA: 1464620 - Error V1427: Item does not match schedule line which explains the reason and the solution for the issue.
Regards,
AKPT

Photo library does not sync in iOS4 after upgrade in 3GS

Hi all,
Photo library does not sync in iOS4 after upgrade in 3GS.
Anyone having such problems?

Just did. Uncheck sync photo check box and sync. Then check sync photo check box and sync. Solved.

Items does not match schedule line

Item does not match schedule line (program error) - message V1427 getting while accessing the Sales Order via VA02/VA03.
While we see in table VBAP we can see all the line items except the Item number 10 for the order. However, in the table VBEP, we see 5 line items for the Sales Order.
It is not allowing us to enter the Sales Order. Kindly help.
Thanks in advance.
Message was edited by:
Praveen Kumar

Hello,
we've got the same problem.
Because of some changes in an SD-Userexit the problems have been generated.
In our case the SAP-notes can't help to solve the problem with VBAP/VBEP.
I wrote an report which check and delete the excessive positions of both tables.
Hope it helps.

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)

Yosemite does not recognize HP printer after upgrade. I can print from my iPhone, but not my 13" Macbook Air (2013)
Are others having the same problems?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

Reschedule does not update the schedule line

Dear All expert,
After upgrade to ECC6.0, the reschedule does update the schedule lines eventhough it list all the required to be update in the list.
As I checked , it update the ekpo successfully but does not update the eket.
Is there any suggestion ?

Hi,
On the initial screen of V_V2
Remove tickmark of SIMULATION, Then it will update schedule lines in sales document
Kapil

Oepe claims domain version does not match running server after upgrade

Hi,
we've just upgraded our server and development environment:
OEPE: from 11.1.1.6.1 to 11.1.1.7.2 useing the eclipse update functions (help-> check for updates)
Weblogic 10.3.3.0 to 10.3.5.0 using wls1035_upgrade_generic.jar from oracle support.
The servers seem to run fine and so does eclipse.
I can add the local (upgraded) weblogic devel server to the eclipse server list and deploy jee files. However, the remote server were not validated after the upgrade:
"Oracle Weblogic Server 11gR1 Patchset 4 at [remote host] [Stopped, The domain version does not match the running server.]
Removing and adding the servers again got the same result. The servers are running in development mode and are running. Where is eclipse checking / comparing the versions ?
thanks,
Michael

Hi,
thanks for the replies.
checked the config.xml:
there are two elements domain-version and configuration-version set both of these to 10.3.5.0
I also created a new domain. The config wizard script only gave me the option to create a domain based on 10.3.4.0 but when i went through with the setup the 10.3.5.0 and i could add the server to eclipse.
I cannot add the original domain though i'm now getting the error "The domain path does not match the running server." And i can't say whether this is because i added the new domain or modified the config.xml.
thanks,
michael

My iphoto library, located on time capsule ( +/- 50G) does not load at all after upgrade to OSX to Yosemite ?

Dear all,
I am guessing, this is not the end for accessing to my iphoto (last update) library, my life memories, but after upgrade to OSX Yosemite, my iphoto library, located on time capsule (+/- 50G) does not load at all. I have sent the report to Apple.
I am, worried to save or see my pictures back.
Thanks fo your help.
Clémentine

eurclem wrote:
Hi Larry,
Sorry, for the delay, in the meantime I have restored my previous OS.
But to answer you, basically , I use the time capsule as both a backup volume and an external drive.
It's a 1 To Capacity.
Best Regards,
Clémentine
That is a bad idea
1 - since you have files on the same disk as your backup you have no backup for those files which apparently includes you photos - having no b means it is just a matter of time until you lose them
2 - The TimeMachine backup grows until it fills the volume it is on - when the TC is full iphoto (and maybe other programs) will stop workig due to lack of space
You need at least two external hard drives - one for the iPhoto library (this one needs to be directly connected with a fast wired connection like Thungrbolt, Firewire or USB and be formatted Mac OS extended (journaled) ) and a separate EHD for you TM backup
LN

Itunes does not recognize IPAD 3 after upgrading to IOS 6.

After updating my IPAD 3 to IOS 6, Itunes does not recognize my IPAD 3. What can I do to fix this issue?

I have a similar problem with the iPhone. Tried everything you can think of and then some. There is apparently some devastating bug 7.6 introduced into normal USB device recognition. I've been able to force the phone into recovery mode; the boot recovery USB driver does still work. Restoring the phone every time I need to sync is both scary and time-consuming.

Edit/Display form does not show site columns after upgrade

https://social.technet.microsoft.com/forums/sharepoint/en-US/580111d4-72ca-4193-87ab-1dfd6082fa88/document-set-library-column-not-showing-up-on-edit-form
Hi all,
I don't think this is related to the above question, but the linked "solution" is as good as I can come up with, however it looks like its possible that ALL the libraries in the collection are suffering the same situation...
WHATS HAPPENING:
our site was migrated to 2013 from 2010 from 2007 and is running in compatability mode around 6-18 months ago. I'm pretty sure the old system is gone too - database backups might be obtainable... not sure.
There are a bunch of "site columns" that are used consistently across the collections libraries (there seems to be a general avoidance of "content types", don't ask me why, I don't know, I also don't know what would be involved in moving
them all to content types as many of the sites "views and webparts" use the content type columns to surface things all over the place, so I suspect it would be a big job), but folks have recently noticed that some documents are missing from various
pages (webparts that are gathering documents from these columns values).
But the problem is that it seems that since the update most (all?) of the document libraries NO LONGER enforce the requirement and litterally only show "name*", and "title" in display and edit properties...
Any ideas on how to get things back to showing the "proper" forms (I can only guess what this was from documentation and screenshots and general guessing based on the "commonness" of the columns in question)? Or is there a way to merge
or migrate "columns" to content types in some way that is either "collection wide" or non-breaking?
ANY assistance would be greatly appreciated!

So just to be sure are you saying that '2010 compatabilty mode' is causing these issues?
Just to be SUPER clear from my end this is what I'm seeing as an example;
For a collection
with site columns
many but not all lists
many but not all list items
--> are missing valid data in the site columns that have been registered for that list.
sample:
name          modified by    doctype     department
item1.docx   username   <blank> <blank>
item2.docx   username    WorkInstruction    Planning
if you click "edit properties" you are presented with ONLY the (I'm guessing) content types fields (eg: for Document you get Name and Title) and NONE of the other fields that should be specified.
However if you hit "save" you can see that the data in these fields returns to the "list view" (however it does not re-enable these fields from being active in the View/Edit properties pages).
Is this something that can be fixed? Or are you saying that we need to backup the DB and restore to a FULL version (not in compatability mode) of SharePoint2013? Or are you saying we need to revert to our PRE update backup and do something?
Its been many months since thsi upgrade was done and the system has changed a lot, so you can imagine we are reluctant to loose much of these changes...
Bazinga!

BINARY SEARCH does not work as before after upgrade

We recently upgraded from HRSP 26 to HRSP 40 as well as similar upgrades in non-HR areas on our ECC 6.04 system. We've been in SAP since 1998, and have a lot of old custom programs which were written when we were still new at ABAP. In a few, we put records into an internal table sorted the table, maybe added a few more records to the table, and did a READ BINARY SEARCH. Granted, this is not correct, adding records to a table after it is sorted. But these programs have worked for more than 10 years and now, since our upgrade, the READ BINARY SEARCH does not always find a record where it did before the upgrade.
So this is mostly just a heads-up. If you are missing data in reports after upgrading, this might be the issue. Also I am wondering if anyone has experienced this.
Heads-up!
Janice Ishee

Hi Janice,
you did not give any context. Please note that it is a popular error to think that a SELECT statement will fetch data in order of the primary key of the table - although it happens quite frequently. So always first sort, then binary search.
Probably not related to upgrade.
Regards,
Clemens

IPhone does not work in car after upgrading to os5

After upgrading to os5 my build in hands free device does not work properly anymore, lot of noise, disconnects, connects in general not usable anymore.
How to fix this?

Does your aftermarket solution connect to the Nano's headphone jack or to the dock connector?
If it connects to the headphone jack I would suggest buying an iPhone headphone adapter. I'm expecting mine to arrive via FedEx tomorrow so that I can use my iPhone in the car with a cassette adapter.
Hope this helps.

IPhoto does not recognize iPhoto Library after upgrade

Machine: iMac, OS 10.8.2, iPhoto 9.4.1
Symptoms: After upgrading iPhoto to 9.4.1 I cannot open my iPhoto library of some 30,000 photos. I can see the library in the finder, but iPhoto doesn't want to link to it. It did show in the library pane briefly the Events and Pictures at the full count, but then dropped to zero.
Actions: Opened iPhoto with the OPTION key to specify which library iPhoto should use. Not effective.
Opened iPhoto with the COMMAND AND OPTION keys and ran all actions from repairing permissions, rebuilding thumbnails, repairing the database, and rebuilding the database. Results: 3 Events and 265 Photos. 32,577 photos in Trash.
What steps will restore the Library to its original state? Will this restore meta-data, captions, events, dates, etc?

Try this. Worked for me.
- turn off your router
- turn off you Mac's after removing all available printers
- turn off all iDevices
- do a factory reset of your printer remove all cables min. 30 sec.
- turn on your router first
- ran the network set up wizard
- give your printer also a new name like "DeskJet 2015"
Something which you don't have used before.
- turn on your Mac's and add your printer
- turn on your iDevices at least.
Should work after these steps.
It worked for me including all iDevices.
iOS and Yosemite

Itunes 10 does not 'see' my iphone after upgrading my Imac to Snow leopard

Hi,
I just upgraded my iMac to Snow Leopard 10.6.3. When I plug my iphone (4) (USB), Itunes does not sync my phone, and it does not even appear as being connected to my iMac. I dont have any other issues.
I should add that I always have connected my Iphone through the USB on the keyboard, as I dont have enough USB slots in the back. This has worked just fine in the past. The keyboard is wired.

Try plugging it into one of the USB ports on the Mac itself and see if that works.

Reschedule does not update schedule line after upgrade

Similar Messages

Maybe you are looking for