Rescheduling dependency on plant or stor loc.

Is the Rescheduling plant or storage location dependant ?
So if we have stock in SE01 L010 but not in L001 will rescheduling , as it is configured for SE today , allocate stock that it thinks is available to orders ?

Dear,
Rescheduling-in is the exception message in the MD05 and MD04 transaction list. If you are maintaining rescheduling horizon in the customizing (transaction ) and enabled the check boxes for the firmed receipts to check for the rescheduling then system will carry rescheduling check within the scheudling horizon and display the exception message.
Rescheduling check will be carried out against the requirements with the firmed reciepts within the horizon. For example if you have the requiremenst today for 100 pieces and there is firmed reeciept like prurchase order in the next month...and if this requirement and firmed receipt falls within this rescheduling horizon then there will be exception message will come for the purchase order to bring forward (or reschedule-in) to the date to cover the requirements.
We define it in OPPQ /OPPR these are plant specific hope clear to you.
Regards,
R.Brahmankar

Similar Messages

  • Stor loc stock to be excluded forone plant during planning run in PPDS

    Hi All
    I want stock from one particulat storage loc from one plant only to be excluded from MRP planning in PPDS.
    I have activated in SPRO R3 -MRP , Storage location to be excluded from MRP
    Now, I have a list of material master data in R3 and also in APO under the plant and stor loc. Also the integration model exists for material and stor loc stock
    Do we need to change the master data in R3 for the stor loc indicator in MRP4 view for each and every material in R3 and then re activate the integration model
    If not, is there any other process or transaction which automatically does?
    Pls thr me some light on this
    regards
    Vijay

    Vijay,
    You should activate the MRP 4 view indicator. The MRP cutomizing is only for defualting the value during material master creation. The material master setting is only considered in MRP run. I am not sure about the integration model.
    Regards
    Ram

  • Stock transfer between stor loc. of same plant triggered by Sales Order

    Hello everyone
    I need some input regarding triggerring Stock Transfer between 2 storage locations of the plant from a Sales Order.
    Sales Org: ABCD
    Plant: WXYZ
    Stor Location: 0001 & 0002
    Now here 0001 is the Picking location for the Delivery Document.
    However 0002 is where all the stock is stacked.
    Physically they both are different buildings in the same vicinity.
    The Business wants the Sales Order to trigger the stock movement from 0002 to 0001 on a daily basis.
    So from a end user prospective, they will move the stock from 0002 to 0001 for all the items needed to fulfill the Orders due for Shipment for that day.
    What options do I have for this ?
    Thanks
    Vin

    Well actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
    I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
    I have configured the STO for storage location - stor. location in a Plant. ...
    However I am struggling to trigger a STO from a Sales Order.
    I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
    The flow looks somewhat like this
    Sales Order -
    > Stock Transfer PR in Plant WXYZ -
    > Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
    > Delivery DOc for Sales Order -
    > Invoice for end customer --- > Intercompany Invoice
    If anyone has automated creation of a STO from a Sales Order .. please advice
    Thanks
    Vin

  • Split valuation based on stor. loc.

    Dear Guru,
    Please guide me how may I configure split valuation based on stor. loc. My company in multi level marketing (MLM). We have stor at Brunei as well. Our business set different price if any stocks parked at Brunei stor. loc.
    Exp: Material A - RM1 at M'sia stor loc.
    - if this material transfered to Brunei branch, it should calculate as RM1.50
    - so stor. loc. should shows different valuation
    I need to configure this for existing material. Bus. use PO, GR & IR for this procurement.Please assist me guru.
    rgds,
    nantha

    Hi,
    Valuation category is used if you want to have a split valuation i.e. you have an option of differentiating partial stocks of material according to particular criteria & handling them differently regarding valuation within a plant.
    Why Required? : 1)Your valuation of  Brunei & M'sia may be different
    Following configuration reqd.
    1)In global setting we have to define Valuation category( Say storage Location) & Valuation type( Brunei & M'sia
    2) Active split valuation in MM
    3) Assign valuation type to category in customizing
    5) In Material Master enter valuation category in accounting view & choose price control V
    6) Extend Material Master view for both valuation type
    7) valuation category to be active /assign for plant
    8) In local definition Define Valuation category to Valuation area.
    Then for every transaction (Valuation relevant) may be GR, GI, and Phy. Inventory you must mention valuation type during transaction to get your material valuated separately.
    By this u will able to map your requireemnt & able to valuate diffrently.
    Vivek

  • New Report for Opens Sales order and P.O from Plant and S.Loc

    Dear Gurus
    We have repory requiement for Open sales order and P.O to deliver from particular plant and S.Loc.
    If you have already developed this kiond of report help me inthis case.
    Thanks
    ramki

    closed

  • Adding a subscreen in Plant data/stor. 1u0094 tab in Material master

    Hi All,
      I need to add a subscreen in material master Plant data/stor. 1 tab. Please let me know if its posible.
    Warehouse management requires a primary bin and 4 alternative bin locations to be added to the material master. Four custom fields will be added in addition to the standard primary storage bin location field. These fields will be held at the branch/storage location level. 
    For this I enhanced MARD table with a structure contains 4 fields.
    •     A sub-screen should be added to the “Plant data/stor. 1” tab. “Alternative Bin Information” section should hold the additional four fields.
    I want to add a sun screen under General data. This sub screen contains 4 fields for alternative storage bins.
    Regards,
    Venkat.

    Hi,
        Hi,
    u'll have to do the following:
    1. copy the std func group MGD1 to ZMGD1....include all ur custom screen and make sure u hav written the PBO and PAI .
    Best way would be copy any standard screen and then making any change there like modifying the label.
    2. next step is copying the screen sequence ( logistics-material master-configuring the material master)....01 to z1 and then assigninng all ur new program and screen name in this custom screen seq ...
    and u can assign this custom screen seq to diff material type....
    there is a bit of SPRO involved in this...
    and check the BADI BADI_MATERIAL_REF.
    <b>REWARD POINTS</b>
    rEGARDS

  • How to make default Currency  depending upon plant in table entries

    Hi,,
    How to make default Currency  depending upon plant in table entries?
    I am making entries in SM30.
    I have the following fields in z table.
    plaant , material,month.year,PFvalue,Currency.
    Can  some body throw light for this issue,please?\
    I am familiar  with modification-events.
    With Regards,
    Jaheer

    Hi,
      In PBO, within a LOOP, table control is filled via a Structure/Work Area.
      In that module, code as follows,
    LOOP AT SCREEN.
        IF WA-FIELD1 = C_1 AND SCREEN-GROUP1 = C_G1.
          SCREEN-INPUT = 0.
          MODIFY SCREEN.
        ENDIF.
    ENDLOOP.
      Here, WA is a strcture & FIELD1 is its field, like that...
      I already did this.
      Check it out & Reply.
    Yours,
    R.Nagarajan
    We can

  • Exclude availability check for a particular stor. loc.

    Hi,
    I need to exclude a stor. loc. for availability check. MRP should not be excluded.
    How can I do that?
    Thanks in advance.
    Sonal

    Hi ,
       For exclude the storage location from availability check plz follow the below
    1. Go to transaction OPPJ
    2.Select Determine Check
    3.Select the availability type which you use and go to details
    4.There you can find the Storage location check tab
    5.put the check mark in No Storage location inspection and save.
    So that the storage location will not be included.
    Hope it will clear you.
    Regards,
    Vijay.

  • Changing the Stor.loc in ME22N

    Hi all,
    I've to change the address of a Store.loc (I use it in items of ME22N).
    How to do it?
    Thanks
    Gandalf

    Hi,
    Do you want to change it incidently? If yes, then you can simple change it in the address tab of the PO.
    Regards,
    MdZ

  • Delete stor. loc.

    Guru,
    How may I delete stor. loc. that exist. Please take note that there are materials exist in this stor. loc. Appreciate if you could brief me how may I go about it clearly.
    rgds,
    nantha

    Furthermore.
    the material master has a storage location view.
    If you delete the storage location from customizing, then you cannot set the deletion indicator for this view in material master, as SAP checks the existence of storage location in table T001L in this moment.
    So you may have to set the deletion indicator to your materials master storage location views first.
    And again, when you carry out archiving in SARA, and want archive all this storage location view from materials then you cannot as SAP copies the storage location from T001L table into an internal table.
    And since you deleted the storage location from T001L in customizing, the view can never be archived.
        IF NOT LGORT[] IS INITIAL.
          SELECT WERKS LGORT FROM T001L
                       INTO CORRESPONDING FIELDS OF TABLE IT001L
                       WHERE WERKS IN WERKS
                       AND   LGORT IN LGORT.
          SORT IT001L BY WERKS LGORT.
        ENDIF.

  • STO ( stor. loc. to stor. loc of same plant ) creation frm Sales Order

    Hello guys
    I am facing a unique scenario in our current environment. Need you input ASAP
    environment:
    Org 1 - Plant 1 - division 1
    Org 2 - Plant 2 - division 2
    Org 1 wants to take over the sales of all the items belonging to division 2 which are currently being sold by Org 2.
    These items are HAWA and their procurement is currently done outside ECC.
    Now the procurement of these items will continue to be done by Org 2 & even its inventory will be owned by Org 2.
    Proposed Sales Flow:
    1) Org 1 accepts Order for the item with Plant as Plant 2
    2) Plant 2 Delivers the goods to customer
    3) Org 1 invoices the customer
    4) Org 2 invoices Org 1 using Intercompany billing.
    Now the challenge is wrt step 2.
    The Items are shipped from Plant 2 with their Issuing storage location as ABC.
    However these items are initially stocked in a different building outside the Plant 2 .. say stor. location = XYZ
    Now based on the Sales Requirements due for shipment today .. the users will move the Inventory of the items from Stor. Location XYZ to ABC for which they want some reference document for the move (which I have recommended as STO)
    I have come across some threads which give input regarding triggerring STO from Sales Order.
    However my challenge is the STO in this case is between 2 storage locations ABC & XYZ  of the same plant.
    Do you think Sales Order triggering a PR (similar to 3rd Party scenario) & then this PR converts to a STO work ?
    Please let me know the steps if possible.
    THanks
    Vin

    Well actually the Selling Org ABCD is of a different Company code .. it is a typical case of Intercompany Sales .. where the Plant WXYZ is belonging to another company code.
    I have setup the Intercompany Sales Process .. and want to trigger the Stock movement as mentioned above.
    I have configured the STO for storage location - stor. location in a Plant. ...
    However I am struggling to trigger a STO from a Sales Order.
    I tried using the Schedule Lines to trigger a Pur. Req ... however the Supplying Plant field remains blank (which is the same in this case as it is a stock movement between 2 locations of the same plant).
    The flow looks somewhat like this
    Sales Order -
    > Stock Transfer PR in Plant WXYZ -
    > Delivery Doc for the STO --- > MIGO to receipt the inventory in 0001 -
    > Delivery DOc for Sales Order -
    > Invoice for end customer --- > Intercompany Invoice
    If anyone has automated creation of a STO from a Sales Order .. please advice
    Thanks
    Vin

  • STO to transfer material from Stor.Loc. 0001 to 0002 under the same Plant

    Dear friends ,
    Does anyone already have used the new functionlity to transfer material from Storage Location 0001 to Storage Location 0002 under the same plant  with STO ?
    Which delivery  and movement type should I use to do that ? we put a mov. type 311 but errors appear for us.
    best regards,
    Alessandro

    Hi Alessandro,
    You can very well create an STO keeping the issueing and receiving plant as same and mentioning the issue S.location and do the DO using VL10B and PGI using VL02N.
    at the time of GR you can specify the receiving S.location and post the GR.
    There is no any requirement for specific config.
    Regards
    Merwyn

  • Locating pur grp, plant, & stor loc for materials

    Is there a way to view a table possibly (using SE16?) to view the Purchasing Group, Plant and Storage Location(s) for a given Material?
    Thanks much.

    Christopher,
    Table MARC contains material/plant data, including purchasing group for a given material.
    Table MARD contains Material/plant/location data.
    Rgds,
    DB49

  • Rescheduling across multiple plants

    Hi,
    When the rescheduling runs, is it possible via the standard system to look for inventory in mulitple plants and change the plant (where the inventory is available) on the sales order item accordingly?
    Any thoughts would be highly appreciated.
    Thanks,
    Prayarna

    Not in standard SAP.
    You need to write a progrma to do that (I would limit to unconfirmed items only).
    But it's not an easy task as material may have different availability control settings in different plants and you in fact may select not the best option...
    I believe tools like i2 can do that.  Try to check if APO can help here as well.
    By writing your own program you may just spend time trying to re-invent the weel (re-create tool like APO or i2) and it's not an easy task

  • Query-Price control, Depot as Plant, Rejection Store

    Hi SAP Gurus
    Pl clarify the below mentioned query:
    1. Can price control be changed from moving avg price to std price or vice versa? What if transactions have been done, stock is available, material movement done. 
    2. What are the benefits of defining sales depot as plant? What if sales depot is defined as depot only. (We have cash sale from depot.) 
    3. What is the need of defining separate rejection store? Can we avoid it even if in our production process rejection is generated.
    Regards'
    Manoj Gupta

    Hi,
    For point 1.
    You do nnot need to use MR21 to change the price control from V to S or from S to V. The system will allow this change even if there is stock or if there are open POs etc. The price will not be changed it will just change the control.
    There are two scenarios where restrictions may apply. Firstly the material type may have been configured to only allow one (V OR S) and so you could not change one of these materials without changing the config of the material type. The other scenario is for "split valuated" materials, you cannot set the main accounting view to an S if the material is split valuated. Other than this the change of price control can be done at any time.
    Points 2 and 3 are IS retail specific and so I cannot comment fully on these, but you need to try to map these correctly. Try to look at the functionality that will be used at each and determine which you would lose by choosing each option. For instance if it was not a retail system I prefer to use Plants instead of storage locations for different sites because this is the way that SAP designed the system. I DON'T just use storage locations simply because the master data is easier to maintain, that would lead to a loss of functionality.
    Steve B

Maybe you are looking for