Reservation is deleted when PM order is TECO

Dear Experts,
I have a PM order which has been TECOed, I noticed that the components' reservation were set to deleted..
Is this right?
Thanks!

Hi,
The reservation against the components are active in Material Management until u do TECO of the order. Once you do TECO all pending reservation and pending purchage requesitions are will be set deletion flag.
If you want to active the same you need to revert back the order.
Regards
Srinivas

Similar Messages

  • Deletion of Purchase Requisition when PM order is TECO

    When a Purchase Requisition (PR) is created from PM order using control key PM03, after approval of PR, Purchase Order (PO) is issued. After completion of maintenance job and acquiring services or material procured against PR which has been created from PM order, PM order is Technically completed. When order status is set as TECO, PR got deleted. This behaviour of deletion of PR when order is TECO is not normal and not required. Does any body can have reason for this deletion of PR and solution to fix this problem.

    This is standard behavious in the PM/CS order.
    To stop the MM guys getting "confused" (poor things...), maybe you need a warning message when TECOing an order to say that there are open PRs without PO (see user-exit link at the top of this forum).
    PeteA

  • Why account assignment is not deleted when push "Order as Direct Material"?

    Hi Gurus,
    I have a problem with shopping carts (SC) of stock items:
    1.- I add 5 items.
    2.- I push "Order as Direct Material" button for 3 items only.
    3.- I push "Hold" button to set SC with held status.
    4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.
    5.- I order the SC.
    One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
    But for the last 2 items (number 4.-) the account assignment is not deleted.
    This is causing that the PO's have error: "Invalid tax code".
    Somebody can say to me why is not deleting the account assignment for items previously hold?
    My systems are:
    SRM 4.0 (SRM_SERVER 500) level 8
    R/3 4.7 (SAP_APPL 470) level 24

    Juan Alonso Valenzuela Rodríguez wrote:
    > Hi Gurus,
    >
    > I have a problem with shopping carts (SC) of stock items:
    >
    > 1.- I add 5 items. -- O.K - Assumed that you have 5 items added
    > 2.- I push "Order as Direct Material" button for 3 items only.O.K.You selected as ORDER as direct only for 3 rd item
    > 3.- I push "Hold" button to set SC with held status.- O.K. now HOLD the shopping cart
    > 4.- I modify the SC and push "Order as Direct Material" button for 2 items missing.- Now you went to 2 nd items and ORDER as direct
    > 5.- I order the SC.but this 2 nd item account data was not removed though you selected as ORDER as direct-
    check item data what is stored here DP ? if account assignment not cleared it could be a bug. but you need to convince them to get a correction note.
    >
    > One of the effects that it has the "Order as Direct Material" button is that it deletes the account assignment because the items will use to create a PO stock.
    >
    > But for the last 2 items (number 4.-) the account assignment is not deleted.
    >
    > This is causing that the PO's have error: "Invalid tax code".
    >
    > Somebody can say to me why is not deleting the account assignment for items previously hold?
    >
    > My systems are:
    > SRM 4.0 (SRM_SERVER 500) level 8
    > R/3 4.7 (SAP_APPL 470) level 24

  • Deleting the reservations for components of a production order without TECO

    Dear Gurus,
    I forgot to activate the backflush indicator in the beginning. I activated the backflush indicator in between. But for the confirmations already made I had to issue the material as unplanned consumption for the order. This is not clearing the reservations for the material.
    How to delete the reservations for components of a production order without TECOing the production order? My order is not completed.
    Thanks and Regards,
    Raghu

    Hi Kumar,
    I have a production order for 1000 header (A) qty. My control key is PP03 (auto goods receipt from confirmation in CO11N).
    For this order the component B qty is 1000 (BOM consumption is 1:1)
    Without doing GI, the confirmation is done for 300 A qty. I realized that auto GI is not done for the 300 qty of component B as there was no backflush indicator.
    Now the backflush indicator is activated in the production order for component B.
    In the next confirmation for another 300 A qty, automatic GI is posted for 300 B qty because of backflush now.
    Now my confirmed and GR qty for A in two rounds is 300 + 300 = 600.
    GI of component B done is only 300 (through backflush).
    Qty yet to confirm = 400.
    So I did GI of 300 B qty through MB1A (which is an unplanned issue). This does not update the withdrawn qty in the production order. Also the reservations for component B for this 300 qty are not reduced in the system.
    Now the reservations against the order for component B = 1000 - 300 = 700 (which is 300 more than the qty yet to confirm).
    Now when I run MRP for another 2000 qty of A, the procurement proposals for B will be 2000 + 300(undeleted reservations) = 2300. Though the system is behaving properly, this 300 is additional and unwanted.
    For this reason I need to delete these reservations before the MRP run. As order is still open, I cannot TECO the order. Nor can I clear all open reservations from CO11N.
    Thanks and Regards,

  • Material reservation deleted into maintenance order

    Dear,
    I'm facing with strange issue with some maintenance order... The users have created some maintenance order, done material reservation and released these order... After that they are trying change these materials reservation and then when they go until the reservation they can see the material with status "item is deleted".
    However no changes was done these reservation. The components items is maintaned with gray scale.
    Wagner S.

    Wagner
    Can you please post the full message text including message number.
    Are you using any developments that might delete these components?
    Also, can you send a screen-shot of the following:
    Components tab with deletion indicator shown
    Order header - so we can see the statuses
    Double-click into one of the material items to view the General Data sub-tab
    PeteA

  • Purch Req get deleted once the maintenance order is TECO'ed

    Guys,
    Purchase requistion is automatically get deleted once I do the TECO, I think there should be a config to restrict this. Could anyopne knwo what I need to do for this. Thanks.

    Hi Praveen ,
    TECO is assigned to work which is Technically completed (Physical work  completed ).
    When Maintenance work required for the Order is completed , it means that excess material and services planned are no longer required.
    Hence Purchase requisition is automatically get deleted once you do the TECO .
    Any purchase requisitions that have not been converted into purchase orders are deleted . This is standard functionality.
    Though system allows you to do the following
    a)Locked or Unlocked
    b)Set deletion flag
    c) you can still post some cost like invoice receipt for material delivered or consumed
    User Exits will surely help you in this Scenario ,  Your ABAP team will be able to help you here  .
    Regards
    Arif

  • Controlling the output when purhcsae order item is deleted

    HI
    Here is our scenario, we have two outputs automatically determined ( by condition records) when a purhcase order is changed, now when we delete the purchse order item we want only one put type to be triggered and not the other one.
    NEU    - When the PO line item is deleted  we want  trigger this output
    NEU1  - When the PO line item is deleted  we dont want to trigger this output
    Obviously we cannot  use "Fields Relevant to Printouts of Changes"  config to deactivate the EKPO-LOEKZ field as it impacts both the outputs.
    Is there a way to achieve this?
    Thx,
    Krishna.

    Hi Mohan,
    Thanks for the reply, we did try to use that requiremnet option but then how do you know if the purchase order item is being  deleted?  You have this field in the routinue KOMKBEA-DRUVO which gets pouplated with '2' means change.
    Obviously you cannot do a select query on EKPO because the PO is not yet updated at this point of time.
    Thx
    Krishna.

  • Main Order TECO when Sub-Order is open

    Dear All,
    I just wanted to clarify if we can do TECO of Main Order when Sub-Order is open? If we can control this using any settings.
    Presently it is not allowing to do TECO of Main Order as long as Sub-Orders are open.
    Regards,
    MLN Prasad

    The Main Order Cannot be set to TECO If any sub order exists for the Main Order and have not been completed. When Teco-ing the main order without having completed the sub order the system would show you the following message: Open Sub Orders Exist for the Order (IW 189). To avoid this for example if you want to allow the Technical Completion of the Main Order with its sub orders as open, then
    Go To SPRO-->Plant Maintenance -> Maintenance and Service Processing-> Maintenance and Service Orders-->Message Control
    Here look for the message IW 189 and change its category from E (Error) to W (Warning) or No Message. This would solve your problem.

  • PR line item deletion upon PM order TECO

    Hi All,
    PR line item gets deleted upon PM order TECO.
    Any suggestions pls.
    Thanks in advance.

    Reference [thread|Deletion flag set to service pr upon tech. completion of order]and  [thread|PR Marked for deletion after Business Complete]

  • Prevent time entry in CAT2 when Internal Order or WBS is in TECO status

    Hello Team,
    We need to prevent time entry in CAT2 when an internal order is in TECO status. Looks like CAT2 is calling business transaction RFBU (FI: postings) which is allowed in TECO.
    I'm wondering whether I can isolate CAT2, so that we can prevent just the time entry. Any suggestions, please.
    Thanks!
    VJ

    Hi,
    Try creating a user status which will prevent the posting when WBS Status is TECO.If not, use the many user exits available in CAT2 and put in a custom code check for the status.
    Regards
    Sreekanth

  • When planned orders can reserve capacity

    hi experts.
    after MRP Run i had 3 planned orders, one of them for safety stoock and the others for PIR , and i converted one of Planned orders (For PIR) to Production order,,,,,,,,,,,,,when i made capacity evaluation for the work center using CM01........i found capacity requirements made for Production order and PIR Planned order but no requirements for safety stock order????  whyyyyyyyyyyy?
    I want to know when planned orders can reserve capacity and when they cant.
    thank you

    Abobakr,
    I believe you are talking about creation of capacity requirements, not reservation of capacity. 
    Planned orders will create capacity requirements when
    1.  They are configured to generate capacity requirements during Detailed scheduling (OPU5)
    2.  They have been Detailed scheduled (either manually, or using MRP Scheduling 2 ''Lead time scheduling and capacity planning')
    3.  They are scheduled using a valid Routing which contains a capacity consuming (finite) work center in one of their operations.
    A common reason to see planned orders that are not detailed scheduled is because of the way MRP is run, using Basic dates instead of lead time scheduling.  Another common reason is that the routing is invalid, particularly due to the planned order containing dates that are outside the routing's effectivity dates.
    Rgds,
    DB49

  • FRM-40501 ORACLE error: unable to reserve record for update or delete when

    Hello.
    I have two tab pages and one item on each page. Second tab page item, is mirror item of the first one. I use synchronize property on the mirrored one.
    When i try to update mirrored one i get that error: FRM-40501 ORACLE error: unable to reserve record for update or delete when.
    How can i solve that?
    Thanks

    hi dejan,
    the error u r getting means that the record cannot be locked. This is ussually caused if u had locked the record from somewhere else (u or another user) or when forms cannot find corresponding column to the base table to lock the record.. U probably r facing the second situation. I'm not sure that forms can commit a change to an item that is synchronized cause synchronized items ignore their base table attribute and just copy their value from the other item.
    Why don't u try Copy Value from Item property using <block_name>.<item_name> syntax and your item will have a value copied from the other item but u will have no problem with the db transactions. I suppose..
    hope this helps,
    teo

  • When I delete or re-order my search engines, they keep getting re-added or reordered.

    In the firefox toolbar, I have re-ordered my engines. Periodically, it will re-add the ones I delete or re-order the engines. It's irritating. It does not necessarily happen when I turn off my computer or close firefox. It happens randomly. At least I haven't noticed a pattern. Please help.

    Are you using cleanup software like CCleaner to cleanup files in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] ?
    This can be a problem with search.sqlite or search.json in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]<br />
    You can try to move those two files to a different location or rename them by adding .old to see if that helps.

  • PBS POV video streaming stops when I order actual program to begin. Am up-to-date re PBS, in USA. Never happened before. Started when had POV ready to go when Avira Free Mac Security signalled download available;"told" to wait.Deleted Avira but nadaut noh

    PBS POV video streaming stops when I order actual program to begin. Am up-to-date re PBS, in USA. Never happened before. Problem started  when  had POV ready to go and Avira Free Mac Security suddenly signalled download available--;"told"it  to wait.Deleted Avira but still fails to stream. Presently: screen jumps but remains dark when I order the streaming. Any suggestions, please?  Harry H.

    hello sir,
    i want to your help
    i was installed fresh windows 7 via cd rom and then after installed all software.
    and now after 1 day customer complained me that cd rom not read any cd and i m also check when i insurt cd so its not read and when i am double click on cd rom icon its eject so what i do for that please reply on my email address.
    [text removed for privacy]
    VIMAL

  • Deletion OF Purchase Requisition at TECO

    DEAR ALL,
    My requirement is very simple
    I do not want to set Deletion flag on PR after it is becomes TECO when ever there is PO in the Work order
    When ever there is no PO no problem
    This is MM business requirement
    We had alot of discussion on this already in the topics
    But I could not found the solution how we can res
    Is anybody has done this particular change in work order TECO
    please let me know how to do this ?
    Regards
    chandrashekhar Ingole

    Chandrasekhar,
       This is standard functionality when you TECO the work order, all open requisitions that are tied through the reservation tables are set a deletion indicator.This makes sense since the PR is considered a internal document and there is no legal binding associated to this document and hence the necessary house keeping being done automatically.
       You can overcome this by doing some custom development and having some  authorization cecks. You would need to set "never create requisition" for the order type/Plant combination (Prevent users from being able to change this setting through Auth or hiding the field and Function code). You would need to make sure that all the necessary details are captured on the Non stock item screen of the maintenance order. Then have a custom program,Triggerred on a nightly basis or on SAVE of Maintenance order or other means,  that creates a requisition based on the non stock item entered in the Order and assigning the same work order number as the cost assignment. Now when the order is set to TECO this PR will not be set a deletion indicator since there is no reservation tied to this request. This would solve your problem but be aware of the issues that may arise, if for some reasons the planner would like to cancel the work order by TECO of the job, then you would need to do proper house keeping and delete the PR line item or intimate the purchasing team as appropriate.
      The other way to do this to make a modification to standard program which might be complicated and hence is not advisable to do so.
    Regards
    Narasimhan

Maybe you are looking for