Reset button doesn't reset hidden fields

I've got a form that has hidden fields which hold data that is concatenated into two visible fields (Name1, Name2 and County, State).
My issue is that when I use the Reset button (the standard one off the library palette with the xfa.host.resetData(""); script in it) it resets all of the fields except for these concatenated fields. I'm guessing that they're not being cleared because the hidden feeder fields aren't being cleared.
What am I missing to make this work?
Jennifer

Hi Frankl and welcome to the Cisco Home Community.
Have you tried a 30-30-30 reset?
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Similar Messages

Reset Button does not reset Radio Button

Xcelsius 2008 Engage, 5.1.1.0 (Build 12,1,1,344) - SP1/FP1
The Reset Button does not appear to be resetting the Radio Button back to its default selection. I don't know if other components are similarly affected or not, but this appears to be the only one that I'm using that has this problem. Is this a known issue?
Just to be clear, everything else appears to be resetting OK at this point, just the one component that retains whatever was selected during a given session.
This does not kill my ability to go live with a project, but it does look bad. Any chance this made it onto the list for January's Fix Pack 2?

Grace & Sammi,
Thanks so much for the quick response!
Just now I repeated the problem using a brand new project devoted to this issue. It uses a simple spreadsheet, three Radio Objects and a Reset Button.
-- Radio Button #1 is a "Fruit or Vegetables" selector. The labels are spreadsheet cells A3-A4 and it insert into cell B3. Selected Item (default selection) is "Label 1" which is "Fruit".
-- Radio Button #2 is a "Fruit" selector. The labels are spreadsheet cells A6-A8 (Apples, Bananas, Oranges) and it inserts into cell B6. Dynamic Visibility is set on "Fruit" being selected by Radio Button #1. Selected Item (default selection) is "Label 1" which is "Apples".
-- Radio Button #3 is a "Vegetable" selector. The labels are spreadsheet cells A10-A12 (Carrots, Celery, Potatoes) and it inserts into cell B10. Dynamic Visibility is set on "Vegetables" being selected by Radio Button #1. Selected Item (default selection) is "Label 1" which is "Potatoes".
Cell A1 reports the final selection. Using this formula
=IF(B3="Fruit","Selected: "&B6,"Selected: "&B10)
it checks B3 and shows whatever was selected there.
To repeat the problem in Preview mode:
1. Pick "Fruit", then "Bananas" (second option).
2. Pick "Vegetables", then "Potatoes".
3. Pick "Fruit" from the first Radio component again, and then click Reset.
You will see that "Fruit" resets back to Apples". When you click "Vegetables", you will see that "Potatoes" are still selected. But that Radio should have jumped back to the default "Carrots" selection. Or at least, that is how I would normally expect a reset button to behave.
I suspect the issue has something to do with dynamic visibility. E.g. the Reset Button can't change the state of the invisible component.
-F

Reset button does not reset field color.

Can't find the solution.
I have scripts that highlight the field background color if the value is out of range. Also, resets the color back if the range is OK. This works just fine.
When I reset the form (with button), the field values reset OK, but the field color stays highlighted if that was the state.
The form initially opens with no hightlighting. How do I reset the form values and remove the highlighting?
Thanks,
Wendell

Srini,
I copied a field from my form to your form and the color reset OK. There must be problem with my form structure.
I've only put in two rows of fields to test before I populate the whole form.
The column "Aged Reconciled" highlights yellow if any value other than zero is present. This impacts the column to the right that also is wanting only zero and will highlight in red. If you enter zero in "Aged Reconciled" the highlighting turns off for both fields.
https://acrobat.com/#d=nJ2EpEQ0XT0vGZ8samQHEQ
Thanks for your help!
Wendell

Is it possible to have a button to show extra hidden fields?

I've seen this done using LiveCycle but I'm an Acrobat Pro user. I need to have extra fields hidden and then have them visibile based on a reader clicking "add more".
Thanks,
Bob

This forum is for the Adobe FormsCentral (formscentral.adobe.com) which is a service that allows you to create, collect and analyze data using an online web form. You should ask PDF related form questions in the Acrobat forums: http://forums.adobe.com/community/acrobat/acrobat_windows
I'll move your post to that forum so you don't need to retype it. They can help you out...
Randy

Resetting Hidden Fields

My form starts with a header sub form with check boxes. The user checks whatever box they need and its cooresponding subform appears. Works great, right? The problem comes when it comes to resetting the fields. I hit the reset button and all of the data is cleared, HOWEVER the hidden fields are still visible? How do I reset it it ALL to look exactly like it is when you first open it? Thanks

You will need to explicitly reset the values of hidden fields. Go to the click event of the reset button and set the hidden fields to null. For example,
// form1.page1.ResetButton1::click - (JavaScript, client)
xfa.host.resetData();
TextField1.rawValue = null;
Steve

XML Form builder - Issue with Reset button

Hi Experts,
Using xml form builder I have created a project.In the show form I have added the "Reset" button.
This reset functionality is working fine during creation of new xml file item.
But when I am editing the existing xml file , onclick of the "Reset" button it is not clearing all the data fields instead it is clearing the newly added data.
Please sugguest me how to achieve this functionality of clearing the fields during editing existing file item.
Thanks,
Regards,
Rudradev Devulapelli.

Hi Rudra,
Try writing custom java script and call the same in the button click.
~Priya

How can I get the reset button to work?

When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
Here is the code:
THERE IS AN ATTACHED .FLA AND 3 AS FILES, RESET, TREE, AND ADDATREE2
Appreciate your thoughts! w_sights
ADDATREE2.AS
/* AS3
    Copyright 2008 __MyCompanyName__.
package
     *    Class description.
     *    @langversion ActionScript 3.0
     *    @playerversion Flash 9.0
     *    @author
     *    @since 19.05.2009
    import flash.display.Sprite;
    import flash.display.MovieClip;
    import flash.events.MouseEvent;
    import flash.events.Event;
    import flash.utils.Timer;
    import flash.text.TextField;
    import flash.text.TextFormat;
    import flash.text.StyleSheet;
    import Reset;
    import Tree;
    public class AddATree2 extends MovieClip {
        // CLASS CONSTANTS
         // CONSTRUCTOR
         *    @Constructor
        public function AddATree2(){
            reset.addEventListener( MouseEvent.CLICK, onReset ) ;
            reset.buttonMode = true ;
            reset.mouseChildren = false;
            mcAdd.addEventListener ( MouseEvent.CLICK , onClick ) ;
            mcAdd.buttonMode = true ;
            mcAdd.mouseChildren = false;
            //var reset_btn:reset = new reset();
        // PRIVATE VARIABLES
            private var clickCount:Number = 0;
        // PUBLIC VARIABLES
            public var reset:MovieClip = new MovieClip();
        // GETTER/SETTERS
        // PUBLIC METHODS
        // EVENT HANDLERS
        private function onClick ( evt : MouseEvent ) : void
            clickCount++;
            switch(clickCount)
                case 1:
                        var tree = new Tree ( ) ;
                        addChild ( tree ) ;
                        tree.x = 430;
                        tree.y = 300;
                        tree.scaleX = .95;
                        tree.scaleY = .95;
                        var brickham:BrickhamScriptProBMP = new BrickhamScriptProBMP();
                        var fmt:TextFormat = new TextFormat();
                        fmt.font = brickham.fontName;
                        fmt.size = 58;
                        /*var regularText:TextField = new TextField();
                        regularText.autoSize = "left";
                        regularText.embedFonts = true;
                        regularText.defaultTextFormat = fmt;
                        //regularText.text = "Merry Christmas"
                        addChild(regularText);
                        var css:StyleSheet = new StyleSheet();
                        css.setStyle("p", {fontFamily:brickham.fontName, fontSize:78,color:"#FFFFFF"});
                        //css.setStyle("a", {textDecoration:"underline"});
                        var webText:TextField = new TextField();
                        webText.autoSize = "left";
                        webText.embedFonts = true;
                        webText.styleSheet = css;
                        webText.htmlText = "<p>Merry Christmas</p>";
                        webText.x = 52;
                        webText.y = 41;
                        addChild(webText);
                        break;
                case 2:
                        var tree2 = new Tree();
                        addChild(tree2);
                        tree2.x = 175;
                        tree2.y = 450;
                        tree2.scaleX = .65;
                        tree2.scaleY = .65;
                        break;
                case 3:
                        var tree3 = new Tree();
                        addChild(tree3);
                        tree3.x = 45;
                        tree3.y = 365;
                        tree3.scaleX = .45;
                        tree3.scaleY = .45;
                        break;
           /*     case 4:
                        var tree4 = new Tree();
                        addChild(tree4);
                        tree4.x = 660;
                        tree4.y = 195;
                        tree4.scaleX = .25;
                        tree4.scaleY = .25;
                        break;
        //mcAdd.removeEventListener ( MouseEvent.CLICK , onClick ) ;
        // PRIVATE & PROTECTED INSTANCE METHODS
        /*reset_btn.addEventListener(MouseEvent.CLICK, resetButton);*/
        function onReset(event:MouseEvent)
            var webText:TextField = new TextField();
            var reset:MovieClip = new MovieClip();
            reset.x = 450;
            reset.y = 500;
            reset.scaleX = .01;
            reset.scaleY = .01;
            addChild(reset);
            stage.addEventListener(MouseEvent.CLICK, removeWebText);
            var tree = new Tree();
            removeChild(tree);
            var tree2 = new Tree();
            removeChild(tree2);
            var tree3 = new Tree();
            removeChild(tree3);
        public function removeWebText(event:MouseEvent):void
            var webText:TextField = new TextField();
            var fmt:TextFormat = new TextFormat();
            removeChild(webText);
TREE.AS
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Tree extends MovieClip
        function Tree()
            addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
        private function onAddedToStage ( evt : Event ) : void
            width = stage.stageWidth ;
            height = stage.stageHeight ;
RESET.AS
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Reset extends MovieClip
        function Reset()
            addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
        private function onAddedToStage ( evt : Event ) : void
            width = stage.stageWidth ;
            height = stage.stageHeight ;

Hello:
Thank you for responding so quickly.
I have added child and it has removed the error. However, the button icon has disappeared as you can see when you play the .swf and the reset button doesn't clear the stage of everything but the star and the back ground.
See new code:
/* AS3
    Copyright 2008 __MyCompanyName__.
package
     *    Class description.
     *    @langversion ActionScript 3.0
     *    @playerversion Flash 9.0
     *    @author
     *    @since 19.05.2009
    import flash.display.Sprite;
    import flash.display.MovieClip;
    import flash.events.MouseEvent;
    import flash.events.Event;
    import flash.utils.Timer;
    import flash.text.TextField;
    import flash.text.TextFormat;
    import flash.text.StyleSheet;
    import Reset;
    import Tree;
    public class AddATree2 extends MovieClip {
        // CLASS CONSTANTS
         // CONSTRUCTOR
         *    @Constructor
        public function AddATree2(){
            reset.addEventListener( MouseEvent.CLICK, onReset ) ;
            reset.buttonMode = true ;
            reset.mouseChildren = false;
            mcAdd.addEventListener ( MouseEvent.CLICK , onClick ) ;
            mcAdd.buttonMode = true ;
            mcAdd.mouseChildren = false;
            //var reset_btn:reset = new reset();
        // PRIVATE VARIABLES
            private var clickCount:Number = 0;
        // PUBLIC VARIABLES
            public var reset:MovieClip = new MovieClip();
        // GETTER/SETTERS
        // PUBLIC METHODS
        // EVENT HANDLERS
        private function onClick ( evt : MouseEvent ) : void
            clickCount++;
            switch(clickCount)
                case 1:
                        var tree = new Tree ( ) ;
                        addChild ( tree ) ;
                        tree.x = 430;
                        tree.y = 300;
                        tree.scaleX = .95;
                        tree.scaleY = .95;
                        var brickham:BrickhamScriptProBMP = new BrickhamScriptProBMP();
                        var fmt:TextFormat = new TextFormat();
                        fmt.font = brickham.fontName;
                        fmt.size = 58;
                        /*var regularText:TextField = new TextField();
                        regularText.autoSize = "left";
                        regularText.embedFonts = true;
                        regularText.defaultTextFormat = fmt;
                        //regularText.text = "Merry Christmas"
                        addChild(regularText);
                        var css:StyleSheet = new StyleSheet();
                        css.setStyle("p", {fontFamily:brickham.fontName, fontSize:78,color:"#FFFFFF"});
                        //css.setStyle("a", {textDecoration:"underline"});
                        var webText:TextField = new TextField();
                        webText.autoSize = "left";
                        webText.embedFonts = true;
                        webText.styleSheet = css;
                        webText.htmlText = "<p>Happy Happy</p>";
                        webText.x = 52;
                        webText.y = 41;
                        addChild(webText);
                        break;
                case 2:
                        var tree2 = new Tree();
                        addChild(tree2);
                        tree2.x = 175;
                        tree2.y = 450;
                        tree2.scaleX = .65;
                        tree2.scaleY = .65;
                        break;
                case 3:
                        var tree3 = new Tree();
                        addChild(tree3);
                        tree3.x = 45;
                        tree3.y = 365;
                        tree3.scaleX = .45;
                        tree3.scaleY = .45;
                        break;
           /*     case 4:
                        var tree4 = new Tree();
                        addChild(tree4);
                        tree4.x = 660;
                        tree4.y = 195;
                        tree4.scaleX = .25;
                        tree4.scaleY = .25;
                        break;
        //mcAdd.removeEventListener ( MouseEvent.CLICK , onClick ) ;
        // PRIVATE & PROTECTED INSTANCE METHODS
        /*reset_btn.addEventListener(MouseEvent.CLICK, resetButton);*/
        function onReset(event:MouseEvent)
            var webText:TextField = new TextField();
            var reset:MovieClip = new MovieClip();
            reset.x = 450;
            reset.y = 500;
            reset.scaleX = .01;
            reset.scaleY = .01;
            addChild(reset);
            stage.addEventListener(MouseEvent.CLICK, removeWebText);
            var tree = new Tree();
            addChild(tree)
            var tree2 = new Tree();;
            addChild(tree2);
            var tree3 = new Tree();
            addChild(tree3);
            removeChild(tree);
            removeChild(tree2);
            removeChild(tree3);
        public function removeWebText(event:MouseEvent):void
            var webText:TextField = new TextField();
            var fmt:TextFormat = new TextFormat();
            addChild(webText);
            removeChild(webText);
===============
TREE.AS
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Tree extends MovieClip
        function Tree()
            addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
        private function onAddedToStage ( evt : Event ) : void
            width = stage.stageWidth ;
            height = stage.stageHeight ;
RESET.AS
package
    import flash.display.MovieClip;
    import flash.events.Event;
    public class Reset extends MovieClip
        function Reset()
            addEventListener ( Event.ADDED_TO_STAGE , onAddedToStage ) ;
        private function onAddedToStage ( evt : Event ) : void
            width = stage.stageWidth ;
            height = stage.stageHeight ;

RESET button in 11g

Just now we migrated from 10g to 11g ; so we deleted the reset button we have created earlier using HTML scripts because default REST button is coming in 11g. But when i check that button functionalty its not taking us to default values in the prompt values its just a taking us to previous values what we have selected ; its just a back button.
So to give the same functionalty in OBI can we remove or can we change the RESET BUTTON functionalties in OBI 11G.

Hi,
An enhancement request has been logged to make the functionality in a more friendly way
Bug 12765210 - OBIEE 11.1.1.5.0: RESET BUTTON DOESN'T WORK IN A FRIENDLY WAY
Also Note "Doc ID 1308554.1 Reset Button In OBIEE Dashboard Prompt Does Not Clear Choices." explains the current behavior
There is no way to remove the button , in fact there is an Enhancement Request for this
Bug 13010815 - RENAMING THE 'APPLY' BUTTON OF THE DASHBOARD PROMPT AND REMOVE 'RESET' BUTTON
Regards
MuRam

Z22 reset button not working

My Z22 works fine. Touchscreen works great and all the buttons work fine. I wanted to do a hard reset and nothing happened when I pressed the reset button. I tried holding the power button and pressing the reset button and still nothing. I've pressed the reset button 20 times quickly and still no reset - not even soft reset. I've pressed it while on and while off and while connected to the wall charger. I'm positive it is pressing in. I finally downloaded a hard reset program and downloaded it and it did a hard reset. I've tried the rest button again after it reloaded and still nothing. I've had the Z22 for about two years and no issues. Now I find that my reset button doesn't work. Anyone else have this issue? Any ideas how to get it working again? I guess if it's not messing up I probably won't need it, but then what if it messes up? I've searched for this problem and couldn't find anyone else with this issue.
Post relates to: Palm Z22

Are you talking about the reset button above the headphone jack?
All you need to do to force a shutdown is to hold the power button down for 5 to 10 seconds.
You should not use the reset button to force a shutdown. It is for resetting the PMU.

Need script to show hidden field if number =568845

Hi All
Using Acrobat 9.1 Pro on iMac with OS 10.6.8
I am working on a fillable form and need a script to show a hidden field when a button is clicked.
I have set up a number field to type in a number and the hidden field is"text1"
Now I need a script for the button to only open the hidden field if the number field =568845
That way the client can fill in the code and then show and type in the field.
Any help would be appreciated.
Ron

Hi
The field is hidden to begin with.
Someone will fill out the form with all the other fields.
But they will not be able to see the hidden field.
When they email the form to my client, the client will type the number into the number field.
Then the button to show the hidden field will have an if then statement that if the number field has the right number typed in then the button will show the hidden field, otherwise it will not be shown.
It doesn't have to be a number, it could a word or name.
All I need is the script for the if then statement.
I am trying to use this script, but it doesn't work.
if (event.value == 'Yes') { this.getField ('Hidden_Field').display = display.visible } else { this.getField('Hidden_Field').display = display.hidden }
Ron

Escaping special characters in hidden fields

I am using a hidden field to pass values to the servlet. I am populating the hidden field from a bean. The hidden field can have any string value. My problem is that the value attribute on my hidden field is double quoted and if there is a double quote in the value of the String from my bean it messes my HTML up. Is there an easy workaround for this?
e.g.
<jsp:useBean id="myObject" scope="request" class="MyObject"/>
<input type="hidden" name="myValue" value="<%=myObject.getValue()%>">
If myObject.getValue() returns a string: 60" Mower this will mess my HTML up.
Any suggestions?

First off, Is the Pattern and Matcher specific to JDK 1.4.1? We are currently using 1.2.2? If this is a viable solution, is there a similar one in JDK 1.2.2?
Also, I still don't think it's possible in HTML to escape characters that are values of attributes. Try running the following HTML code:
<html>
<head>
   <script language="JavaScript">
   function getHiddenValue(){
      alert(document.myForm.hiddenDescription.value);
   </script>
</head>
<body>
   <form name="myForm">
   <p>
      <input type="hidden" name="hiddenDescription" value="60\" Mower">
   </p>
   <p>
      <input type="button" onclick="getHiddenValue()" value="Hidden Field">
   </p>
   </form>
</body>
</html>

Can't include a reset button/process that cleans a search text field

Hi all
Using apex 3.0.1 on a XE edition
In my app there's a report that displays a lot of records.
I included an text field item, where user can type a search criteria, then i added a button called "search" which, when submitted, display the records where search criteria is included.
Now, my problem is that i can't put a "reset" button, which, when submmitted, is supposed to clear the search text field, so the report display all records.
I tried adding a branch that triggers when reset buttos is pressed, clearing cache of search text field. It didn't worked, search string keeps on showing on text field.
Then i changed the process, instead of clearing cache, setting search text field item with a value of null. Didnt work either...
Does anyone have a good example of thjis type of reset button???
tnks in advance....
Fernando

yes Earl, i know it's pretty standard...but i got some trouble... anyway, i think it was just a "lapsus brutus" o' mine... It's solved now and here's what i did:
I created a text field button (where search string will be typed), a "submit as Go" button, and a "submit as reset" button. Then i created an uncondicional branch to same page, then i created a Clear Cache for Item process, where the text field cache is cleared, conditioned when "submit as reset" button is pressed.
That solved the problem, thnx very much for your help
fernando

Form Reset Button.. works in Pro., Doesn't in Reader

I created a form in MS Word 2007 and converted to Actobat Pro 9.2.0 and included a reset and print button.
When opening the document in Reader 8.1.3, the reset button only resets some of the fields, although all of the fields are checkmarked in the reset dialog. Also, when I click the print button, nothing happens. I've created dozens of Acrobat forms with reset and print buttons and this is the first time I've noticed that they aren't working in Reader.
Both functions work fine in Pro. Yes, I am sure that the button behavior is linked to a specific action such as >File>Print for the Print Button. This happens on more than one computer, so I don't think the problem lies with just my machine.
Any ideas?

As a test, what happens if you replace the Reset Form action with the following JavaScript?
// Reset all form fields
resetForm();

My home button doesn't work very well, I reset and restored my Ipod but it still doesn't work

I've had this 4th gen. IPod since about mid-June, and it worked fine up until about a month ago. The home button doesn't work very well, and by that I mean if I'm in an app and hit the button once, it won't respond, or it'll think I hit it twice. If I hit the button twice, it either won't respond, or it will think I hit it once. I took it to the Apple store where they reset it. They said that if that didn't work, then to restore it. Well since resetting it didn't work, I restored it, and that didn't work either. I've had the same generation IPod before and never had this problem. Any advice?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Reset button for text entry field

Hello,
How do I add a reset button that removes information entered into a text entry field?
Thanks in advanced!

Hmm, is there a reason why you don't use the Likert type of question, and have the Clear button (you can change the label to 'Reset') available? That would be a lot easier.
And if you want to create such a custom slide, why don't you use the enhanced radiobuttons widget from Jim Leichliter? I explained how to reset the radiobuttons choice it in this blog post:
http://blog.lilybiri.com/extended-widgets-for-custom-mcq-and-tf-questi
And in this one I explained similar work flow for the extended TextArea widget. Same logic can be used for the enhanced TEB I talked about in my first answer:
http://blog.lilybiri.com/extended-textarea-widget-more-functionality
Since you are using 5.5, no output for HTML5 is possible, so you can use those widgets. Really, although I'm an Advanced Actions fan, I would never try to realize this the way you are doing it. Maybe with shared actions in 7, or with the new copy+paste functionality for advanced actions in 7.0.1 but not in 5.5. Be sure: my memory about the different versions is pretty good.
Lilybiri

Reset button doesn't reset hidden fields

Similar Messages

Maybe you are looking for