Restarts and freezing problems

I've owned this iMac for exactly 2 days. In these 2 days, I have had to restart--or the computer suddenly restarts itself--nearly 20 times. It's driving me insane. I have repeatedly lost my work. I can't maintain a wifi connection either. I've tried what the forums recommend for that (renew DHCP, set MTU to 1453) and it hasn't helped at all. I've read that Mountain Lion itself is problematic. Should I change to Lion? Wait it out and save every few minutes in fear of another shutdown? My computer came with Mountain Lion, but no OS disc, so I'm not sure what to do.
Stats:
iMac 27"
1TB HD
4GB memory
Mountain Lion OS
I know it's not running particularly hot.
The freezing seems to happen when I click too fast in succession, though not always. Doesn't matter if it's processor intensive or not. Sometimes I can run the computer for a few hours, other times it freezes in the first few minutes. I'm really disappointed with Apple. This is completely unacceptable.
HELP!

Call phone support. You get 90 days free and it will generate a service record incase you got a lemon out of the box.

Similar Messages

After installing Adobe Reader 8.1.2 system restarts and freezes

After installing Adobe Reader 8.1.2 system restarts and freezes (hangs, locks up)
I have Windows XP SP2, plenty of spare disk space and Adobe Reader 8.1.1.
The 8.1.2 Reader appeared to install OK and asked for the system to be restarted. When I accepted this it shut down and rebooted as expected,
but just before it was fully restarted it froze and I could do nothing.
I pressed the power switch and tried again but the same thing happened again.
To get back to a usable system I had to boot in safe mode and go back to a restore point.
I don't know if this is relevent but it stopped just before Nortom firewall usually starts.
I am keen to install the new version because of the security fixes.
Can anyone help?
Thanks in anticipation

The link to the Reader forum is at the top of this forum.

HELP: I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few mins, iphone will auto restart and freezes at the home screen which I can't unlock. I have to hold the "home" "off" button to restart the phone.

Dear all, please hel!!
I sync my iphone ios 4 to another iphone ios5, sync was completed but after a few secs, the iphone with the IOS 5 firmware will auto restart and freezes at the home screen which I can't unlock. It will then freeze for a few secs before repeating the restart phase again and again and again.
To solve this issue, I have to hold the "home" + "off" button to restart the phone. Afterwhich, it will restart the phone. However, although my stuff are still on the phone, all my sms are gone.
Can someone please assist urgently.
My data was transferred from another iphone 3GS which is running an IOS 4.0.1 to another 3GS running ios 5.0.1
Is there a serious compatibility issue with both firmware?
Please help.
Thanks!

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

Lumia 920 restaring and freezing problem !!!

dear sir/madam,
I have bought Nokia Lumia 920 four months back. I have been facing restart problem the day I bought it. I went to Nokia care twice (khobar,SA). But still im facing the same issue. Every day it restarts 2 to 3 times. And sometimes im facing freezing problem also...once it get freezes I need to do hard reset, whenevr I do the reset, time and date changes to Sept 2012. Its really annoying. I'm fed up of using this phone. And im not at all satisfied with the service. When evryone was suggesting me to go for iPhone 5, I stood on Nokia Lumia 920. But these issues makes me to feel that I took a wrong decision. I had spent too much money this mobile but not worth it. I need to travel 100kms to reach Nokia care. That too on working days. Please make it worth when I go next time. Else I will SWITCH TO IPHONE!!!

now my phone got freezed and not booting up...i tried hard reset everything still..its dead from d past 2 days....pls help

Random restarts and freezes. Just upgraded my RAM trying to diagnose new RAM as the problem but they pass Rember test.

Hey so I have been dealing with random reboots and computer freezes since upgrading my RAM. I also reinstalled my 10.8.2 at the same time I upgraded my RAM. I have a Mac Mini Mid 2011 with the OWC Data Doubler Kit and a Crucial M4 128GB Boot drive. My computer reboots every 30 minutes or so and sometimes completely freezes up. I am trying to figure out if the new RAM is the issue as I can send them back. I have ran several Rember RAM tests but the computer freezes mid test so I can not see the issue. All other times it completeles the RAM test with no issues.
Any help is greatly appreciated!
Here is my last crash report:
Thu Mar 7 15:34:36 2013
panic(cpu 0 caller 0xffffff8009ab7b95): Kernel trap at 0xffffff8009a76c4e, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffffa00cffad88, CR3: 0x000000000582b00c, CR4: 0x00000000000606e0
RAX: 0x0000000000000000, RBX: 0xffffff800d17f488, RCX: 0x0000000000000000, RDX: 0xffffff800a0bd430
RSP: 0xffffff80fa013d10, RBP: 0xffffff80fa013d60, RSI: 0x0000000000000000, RDI: 0xffffff800d17f488
R8: 0xfffffffffffff000, R9: 0xffffff801b50b5d0, R10: 0x000000010ccc3000, R11: 0x0000000000000200
R12: 0xffffffa00cffad78, R13: 0x000000000000007d, R14: 0x0000000000000000, R15: 0x0000000000000000
RFL: 0x0000000000010293, RIP: 0xffffff8009a76c4e, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffffa00cffad88, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff80fa0139b0 : 0xffffff8009a1d5f6
0xffffff80fa013a20 : 0xffffff8009ab7b95
0xffffff80fa013bf0 : 0xffffff8009ace4ad
0xffffff80fa013c10 : 0xffffff8009a76c4e
0xffffff80fa013d60 : 0xffffff8009a7be07
0xffffff80fa013d90 : 0xffffff8009a75cf4
0xffffff80fa013dc0 : 0xffffff8009a75150
0xffffff80fa013e00 : 0xffffff8009a66b2c
0xffffff80fa013ef0 : 0xffffff8009a6a890
0xffffff80fa013f20 : 0xffffff8009db8d66
0xffffff80fa013f50 : 0xffffff8009de17da
0xffffff80fa013fb0 : 0xffffff8009acecf3
BSD process name corresponding to current thread: syslogd
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide:     0x0000000009800000
Kernel text base: 0xffffff8009a00000
System model name: Macmini5,1 (Mac-8ED6AF5B48C039E1)
System uptime in nanoseconds: 151583130298
last loaded kext at 11211562865: com.apple.driver.AppleHWSensor          1.9.5d0 (addr 0xffffff7f8b414000, size 28672)
loaded kexts:
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.iokit.IOBluetoothSerialManager          4.0.9f8
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.0f2
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.ApplePlatformEnabler          2.0.5d4
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyDriver          2.3.0f2
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f8
com.apple.driver.AppleHDA          2.3.0f2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleMuxControl          3.2.6
com.apple.driver.ApplePolicyControl          3.2.6
com.apple.driver.AirPort.Brcm4331          600.15.20
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleIRController          320.15
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.0
com.apple.driver.AppleUSBHub          5.1.6
com.apple.driver.AppleFWOHCI          4.9.5
com.apple.driver.AppleSDXC          1.2.2
com.apple.driver.AppleAHCIPort          2.4.0
com.apple.driver.AppleUSBEHCI          5.1.5
com.apple.driver.AppleUSBUHCI          5.1.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          86.0.2
com.apple.driver.DspFuncLib          2.3.0f2
com.apple.iokit.IOAudioFamily          1.8.9fc9
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.IOBluetoothFamily          4.0.9f8
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f8
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleHDAController          2.3.0f2
com.apple.iokit.IOHDAFamily          2.3.0f2
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.2.6
com.apple.iokit.IONDRVSupport          2.3.4
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.driver.AppleSMC          3.1.3d11
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.iokit.IOGraphicsFamily          2.3.4
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBHIDDriver          5.0.0
com.apple.driver.AppleUSBComposite          5.0.0
com.apple.iokit.IOUSBUserClient          5.0.0
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.0.3
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.2.0
com.apple.iokit.IOUSBFamily          5.1.6
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.18
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts on the memory modules when handling them. If necessary, clean them with a mild solvent such as rubbing alcohol.
The Apple Hardware Test, though generally unreliable, will sometimes detect a fault. A negative test can't be depended on. Run the extended version of the test.

Videos that require flash player constantly restart and freeze

Running Windows 7 and have tried multiple browers and versions of Adobe Flash Player (all set back to the latest versions as of right now), and have updated my video drivers, but no matter what if I go on any website like YouTube that uses Flash Player, I can watch a video for a couple minutes and then Flash Player will freeze and reboot the video to the beginning. Closing out the window doesn't help, refreshing the page doesn't help either, it will still just let me watch for a few minutes and then freeze and restart. Very frusterated here, any idea what the problem is??

-Using 64 bit version and I've tried literally every available copy of Flash Player located in the archives. It only started doing this I'd say about a month ago maybe.
-Not sure which parts of the dxdiag report you need but this is the overall system info:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130318-1533)
           Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
       System Model: Satellite L555D
               BIOS: Ver 1.00PARTTBL
          Processor: AMD Turion(tm) II Dual-Core Mobile M520 (2 CPUs), ~2.3GHz
             Memory: 4096MB RAM
Available OS Memory: 3838MB RAM
          Page File: 2363MB used, 5311MB available
        Windows Dir: C:\windows
    DirectX Version: DirectX 11
DX Setup Parameters: Not found
   User DPI Setting: Using System DPI
System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
     DxDiag Version: 6.01.7601.17514 32bit Unicode
-The only difference I saw was that non-HTML loaded significantly faster. It usually takes a minimum of 3 min though before I might have restart trouble.

[SOLVED] XFCE4.10 main panel and freeze problem

Hello everyone.
I just have upgraded to XFCE4.10 and after rebooting (as the update included also a new kernel) the main panel is double its size just like the icons. I would have included a screenshot but here is where my second problem appears.
Whenever I try to open a window the system just freezes.
The strange thing is that when I try random things (checking 'Appearance' to see if my Oxygen theme wasn't working anymore with 4.10 or fixing the missing 'Separator' issue for correct window display - former freezed though after clicking on 'Accept') it works but the 'real' things (opening browser - both from applications menu or xfce shortcut panel - or Thunar) do not.
I also noted that when trying to save the 'Separator' fix when I hit the actions button to close the session I was directly just given that option instead of displaying the full menu of restart etc.
Should I consider this a new issue or something I have to setup in 4.10 in comparison to 4.8 where it work perfectly?
I am considering a kernel downgrade to see if it fixes the freeze issue though I doubt, if it does, it would relate to the panel size issue (or that 'only close session' allowance that I have just referred to). The reason for not having tried the downgrade yet is that the system apparently works fine as long as I do not open any window "for real", as said.
Any suggestions?
Last edited by root (2012-05-02 17:34:03)

%$$& Wrote everything nicely down and got logged out xD
Let's see how much I remember.
First of all, right now writing from my downgraded 3.3.3-1 kernel. I didn't succeed doing the downgrade while the 3.3.4-1 was loaded thus I had to do it using the change root method. That way I also discovered the, apparent, reason for the user modules fail at startup and the freezing at the login screen I reported in #3. Somehow the system was using the 3.3.3-1 kernel (I do not know when it installed successfully) but the 3.3.4-1 headers. Most likely I made a mistake somewhere during my previous change root attempt when fixing a *new* unable to find root device that popped up then.
As said, I have been able to downgrade using the Arch Install CD and through the change root method but received the warning,
directory permissions differ on usr/src/linux-3.3.3-1-ARCH/
filesystem: 700 package: 755
after the install/downgrade of each package (linux-docs, linux-headers and linux). Should I consider this a new problem? System works fine so far thus I am not sure about this.
Prior to successfully downgrading I tried to install the LTS kernel but wasn't successful with the 3.3.4-1 kernel loaded. Just like with the downgrade I tried using the change root method and could install it.
But despite updating grub's menu.lst accordingly I was receiving an 'unable to find root device message' which could not be fixed through the change root method just like with the 3.3.4-1 kernel (in case of the LTS one changing the final step from mkinitcpio -p linux to mkinitcpio -p linux-lts as far as I understand it). I might give it another try installing it in this working environment later on and report back with the results.
@ConnorBehan
As I have just stated the user modules fail message and the login screen freeze were surely my fault but the error messages I referred to from the beginning with the 3.3.4-1 kernel were like these,
.... = increasing numbers/disk sectors(?) (left/right)
.... ext4_reserve_inode_write .... [ext4]
.... ext4_reserve_inode_dirty .... [ext4]
.... ? unix_write_space ....
.... ? ext4_dirty_inode .... [ext4]
.... ? ext4_dirty_inode .... [ext4]
.... ext4_dirty_inode .... [ext4]
.... __mark_inode_dirty ....
.... ? mnt_clone_write ....
.... file_update_time ....
.... __generic_file_aio_write ....
.... generic_file_aio_write ....
.... ? ext4_file_mmap .... [ext4]
.... ext4_file_write .... [ext4]
.... ? ext4_file_mmap .... [ext4]
.... do_sync_readv_writev ....
.... ? security_file_permission ....
.... ? _copy_from_user ....
.... ? rw_verify_area ....
.... do_readv_writev ....
.... ? ext4_file_mmap [ext4]
.... ? sockfd_lookup_light ....
.... vfs_writev ....
.... sys_writev ....
.... sysenter_do_call ....
@foutrelis
You may be right with regard to the drive as it is a quite old laptop I am running Arch on. Now that you refer to the drive could the freeze/errors I reported to ConnorBehan be related to the tweaking of the vm.vfs_cache_pressure value I did?
I am just taking a wild guess myself comparing my ide drive to your ssd one. I had never had this kind of problem prior to 3.3.4-1. Just as if this kernel could not handle my tweak anymore (value is 50 and worked fine so far).

Crashing and freezing problem

Ever since I upgraded to Mountain Lion 10.8.3 with Cloud Software, my applications/programs keep freezing, crashing, or becoming unresponsive.
Please let me know if there is anything I could do to fix this.
I updated everything on my iPhone and Mac, so that's not the problem.
I also had an issue with computer going into deep sleep and not waking up unless I help the Power Button to shut it down and then the Power button again to start it back up. I use to schedule it to go to sleep at midnight, but since nothing I did fixed the problem, I have change the settings to just shut down at midnight now.
I like the whole idea of Cloud Based Software, but its not working properly and I have all sorts of issues now.
PLEASE HELP, and thanks in advance.

Maybe this will help with the sleep issue:
Sleep - Wakeup
Your profile shows 10.8.2.
If reinstalling the updater doesn't fix things, hereb are some other troubleshooting recommendations:
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode. Shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac
Upgrade Nightmares

How do I diagnose buffering and freezing problems?

My home business uses flash player to stream horse race videos from four different sites for several hours every day. How can I diagnose recurring yet unpredictable slow downs, buffering, freezing, even Flash Player crashing? Here are the specifics:
We use Chrome, IE and Firebox browsers. We have problems on all the browsers.
All computers in our house have problems but the primary one is: Vista Home Premium 64 bit, Windows 6.0 sp2, 4GB memory.
Our connection screams at 20GB down, 5GBup. I run Internet speed tests during the slowdowns and we are still at this level. The main computer is hard wired into the router, all others are wireless.
Flash Player is used by all four internet sites. All are running at the lastest release version.
I have disabled hardware accelerator, checked the cache setting, etc.
We work in two modes: 1 - streaming live video from the race track. 2 - Playing archived race replays from a replay service during which we pause and rewind extensively.
Some days we have almost no buffering problems, other days the buffering is unmanageable.
Some days (during replay watching) Flash Player freezes and crashes many times, other days there is no problem.
A few months ago, there was almost no problem. Over time things have gotten progressively worse.
How can I determine if Flash Player is the problem? Are there ways of getting throughput statistics from Flash? How can I determine the bottleneck or problem area?

The only possible ways to get a virus are:
-Jailbreak
-Downloading an app that is not from the App Store.
Other than that, your iPhone is fine.
-Ethan

Restart and logout problems

Hello,
I upgraded from Tiger to Leopard some while ago and I ran into some issue. When I try to restart my Macbook nothing happens except this information inside the log file:
Apr 15 18:59:03 Macintosh com.apple.launchd[88] (com.apple.FolderActions.folders): Throttling respawn: Will start in 3 seconds
Apr 15 18:59:18 Macintosh loginwindow[35]: ERROR | WSActivateApp | SetFrontProcess({0, 3466062}) returned error -600. Unable to activate process.
After few second I got a window informing me that the logout/restart process timed out and also that some application did not quit because it crashed. I cannot logout and restart my machine. It is different application every time, but this is really annoying. I tried to thrash loginwindow plist file but it did not help me. What's going on?

Still happens under 10.5.5 for me too.
Here is the output from the system log as I tailed it in real time via an ssh session:
tail-f /var/log/system.log
Sep 22 15:41:07 macbook1 loginwindow[35]: ERROR | -[ApplicationManager(AppleEventHandling) _tryQuitAllForRequestor:replyEvent:] | _tryQuitAllForRequestor - vproc_set_global_ondemand returned error -1843666091
Sep 22 15:41:09 macbook1 loginwindow[35]: ERROR | WSActivateApp | SetFrontProcess({0, 913631}) returned error -600. Unable to activate process.
Sep 22 15:41:37 mp0201jxag com.apple.launchd[1] (com.apple.backupd-wake[4512]): Exited with exit code: 1
Sep 22 15:41:39 macbook1 loginwindow[35]: ERROR | -[ApplicationManager(AppleEventHandling) _tryQuitAllForRequestor:replyEvent:] | _tryQuitAllForRequestor - vproc_set_global_ondemand returned error -1843666091
Sep 22 15:41:52 macbook1 loginwindow[35]: ERROR | WSActivateApp | SetFrontProcess({0, 913631}) returned error -600. Unable to activate process.
Sep 22 15:42:14 macbook1 loginwindow[35]: ERROR | WSActivateApp | SetFrontProcess({0, 852176}) returned error -600. Unable to activate process.

IPlanet Proxy Server 3.6/NT4 restart and heartbeat-Problems

Hi,
we get the following errors:
- Proxy Server: proxy-proxy Heartbeat connect failed: error - 10061
- Proxy Server: proxy-proxy Restarting proxy: reason - 0
- Proxy Server: proxy-proxy Restarting proxy: reason - 2
we were able to minimize the first error by tweaking the
heartbeat-timeout-values as described in the iPlanet-knowledgebase
although we didn't eliminate them completely.
The second error is seldom but the third error sometimes occures several
times within an hour. Does anyone around here know anything about this
error ? I didn't find anything in the knowledgebase.
Is anyone around who can help me out ?
Cheers,
Karsten
Energis-ISION
Karsten Wiborg
System Engineer
Steinhoeft 9
D-20459 Hamburg
Phone: +49 40-3070-1984
Fax: +49 40-3070-1909
eMail: [email protected]
Web: http://www.energis-ision.com

This is a GOOD question. I have just received the SAME message
Could SOMEONE come up with something ?
I've got Windows'2000 Professional and Netscape 7.2
It was only after I installed the Web Proxy Server that I found out I needed Netscape. So I downloaded and installed Netscape and then reinstalled the Web Proxy Server
I've noticed that sometimes IE6 still pops into the picture when something needs a browser

IMac - spinning beach ball and freezing problems

I've had my white-screen Intel processor iMac for almost two years and its run incredibly well up until the last couple of weeks. Now whenever I switch applications, click on menus, play videos, etc the spinning beach ball appears on the screen for up to two minutes at a time. In some cases it gets so bad the computer needs to have a hard shut down.
This seems to happen in every application so its not only occurring when I'm doing certain tasks. When the beach ball appears it even pauses a song if its playing in iTunes.
I've already done a Command-S boot and also tried disk utility and both are telling me there aren't any hard drive problems.
Is anyone else having this kind of trouble? thanks

I'm having the same problem, but on my MacBook Pro... just started today. I'm even having a hard time filling out this web form.
I've run the UNIX maint scripts, repaired permissions, rebooted, everything simple... plenty of free ram, plenty of free HD space (53GB), no CPU usage (2-5% background stuff), no network traffic... just trying to use my Intel MacBook Pro...
Help!?

Dreamweaver locks up and freezes problem for Adobe

I tried to use the Adobe support process using Dreamweaver however I arrived at a "page not found" using their process. Not the first time this has happened. Super frustrated right now just trying to let Adobe know of a problem so I am going to drop the information here for them to find. If it is the wrong place I apologize and please have them move it to the appropriate area as I will not return.
Details:
Using Dreamweaver CS5.5 on a Windows 7 platform which has all the windows update done.
My error message:
While executing DW_WordWrap checked in toolbars.xml, the following JavaScript error(s) occurred:
TypeError: dw.getDocumentDOM() has no properties
I could not get rid of the message, as it would come back every time I clicked on the "x" to close it. I tried everything I could to close it but it kept coming back. I finally had to give it the old Control/Alt/Delete to force Dreamweaver to shut down.
I was working on a page on my computer which was still in an .html format. I was working on a page with a Spry.Widget Tool for Tabbed Panels.
I decided to go to another page I was working on and this is when I got the error message...when I clicked on the other page I wanted to go to. I had used both pages in my current work stage and had gone back and forth numerous times before this error. The tabs and Spry widget worked fine so I was surprised at the timing of the error.
This is the NOT the first time I have had error messages and then Dreamweaver locks up.
However, it is so hard to send error messages to Adobe I just shrug my shoulders and say to heck with it. So we will see where this goes. Hopefully Adobe can run with this or will see it here.
Thanks,
Daryl
I can be contacted through my login profile.
<script type="text/javascript">
var TabbedPanels1 = new Spry.Widget.TabbedPanels("TabbedPanels1");
</script>

same issue here - i get it almost once a day.
i dont use spry.
often if i press OK enough - it will eventually stop appearing, though sometimes i have had to force the application to shut down.

Hi there guys i got an ipod 4 generation last yr in August and it dosent turn on properly it shoes the apple and freezes ive even tried clicking off and home button at the same time but still no outcome pleas help thanks guys

Hi there guys i got an ipod touch 4 generation last yr it turns on and shows the apple but then freezes ive even tried to click the home button and on button on the same time but it restarts and freezes at the apple any suggens to fix it guys please thanks heaps guys

Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Screen scrambles and freezes ipod after update

hey guys, im having some crazy problems with this ipod since the update...the screen kind of scrambles then freezes everything...is anyone else experienceing this and if so how did you fix it if you did at all...sorry if this is a repeat post but im really ****** about the whole thing...any suggestions would be most appreciated...thank you
Josh

I am having the same problem since August 2006. I tried everything everybody suggested, but to no avail. I then sent my 5G video iPod to Apple for repair. They sent it back stating "no trouble found". What a joke! If you go back to the previous version, you can't play music videos anymore, but scramble and freeze problem go away.
No point in talking to Apple tech support. They'll not understand or recognize the problem; they'll just waste your time. I hope some smart guy in this forum will eventually figure out a solution.

Restarts and freezing problems

Similar Messages

Maybe you are looking for