Restore and recovery cases, please add any if i am missing any
in an up database, datafile gets corrupted
in an up database, system file gets corrupted
in an up database, datafile lost
when you start database, log file shows corruption
Please add
I am not sure that what exactly you are trying to do, sorry for a dry comment! There are a lot of different cases which are defined in the B/R guide. I must say that you finish them all first reading the B/R guide side by side. Once you are done, read Rama Velpuri's 8i Backup and ecovery guide and practise it. Once you are fnished from both, I doubt that ther would be anything left .
Just my 2 cents.
Aman....
Similar Messages
-
iPhone 4 went into recovery mode when trying to restore it. Now the only option iTunes allows is for "restore & upgrade", it is not offer an option to restore from a backup, says that must first do the upgrade, when attempting to do the upgrade the iPhone won't accept it.
How can I restore from a back up in recovery mode when the only option is "restore and upgrade"?
Please help.You don't you must restore your phone first and then you will have the option to restore from your backup.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
Restore and Recovery basics!!!
Hi All,
Can somebody provide some useful links for restore and recovery basics...
Thanks in advance,
Regards,
Nick.this is a create book to have. It talk everything from general backup to diff situation, to settin up tape backup...
http://www.amazon.com/Oracle-Database-RMAN-Backup-Recovery/dp/0072263172 -
Database is pending after restore and recovery
Database is in the pending status after restore and recovery.
The database can not startup today and it shows a error message: the log file 2 cannot be archived. Then I issue the following command:
SQL> select group#, sequence#, bytes, members, status from v$log;
GROUP# SEQUENCE# BYTES MEMBERS STATUS
1 452 52428800 1 CURRENT
3 451 52428800 1 INACTIVE
2 450 52428800 1 INACTIVE
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 3;
Database altered.
SQL> ALTER DATABASE CLEAR UNARCHIVED LOGFILE GROUP 2;
Database altered.
SQL> alter database open;
Database altered.
SQL> shutdown immediate;
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SQL> startup
ORACLE instance started.
Total System Global Area 566231040 bytes
Fixed Size 1220580 bytes
Variable Size 125829148 bytes
Database Buffers 432013312 bytes
Redo Buffers 7168000 bytes
Database mounted.
Database opened.But when I try to login using EM console, it shows the database is not open. Then I restore and recover the database using EM Console. But the database then get into the pending status.
What to do next?Stop the EM console and then restart it. I expect all is OK then.
-
Restore and Recovery in ms sql server
What is Restore when will we use this restore ?
What is Recovery when will we use this recovery?
what is the difference between restore and recovery?
could anyone plz explain in detail ?
bhageeYou may refer the below MSDN article that would help you...
http://msdn.microsoft.com/en-us/library/ms191253.aspx -
my mail account is crashing again and again. I've closed and reopened mail, and the computer, and nothing seems to work. I'm not missing any updates. Working on macpro, version osX 10.7.4
Hello:
Try rebuilding the mailbox (it takes awhile).
Barry -
Error 25014 when trying to install Lenovo Thinkvantage Rescue and Recovery! Please help!
Hi there! I recently restored my laptop with a general copy of Windows 7 pro 64 bit. I had to redo all the drivers and software (of course). I had installed Rescue and Recovery before but had never used it. I tried to reinstall it today and it kicks back every time with the same error message (error 25014 code=6)! I had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used ( i have no clue how to combine them). Any advice as to how to get it working will be appreciated! Thanks for your help in advance!
Solved!
Go to Solution.Error 25014 rc=6 is error installing the RNR boot manager.
Provide some information:
(1)Did your machine ship from Lenovo, with Lenovo factory system? If so what operating system was installed? vista, windows 7 home, pro etc? This would install with 3 partitions: system_drv, Lenovo recovery, (C).
(2)you state: I recently restored my laptop with a general copy of Windows 7 pro 64 bit
Does this mean you DID not do a Lenovo factory restore, but actually installed a retail version of win7 pro?
I will assume win7 pro retail for now.
(3)you state: I had installed Rescue and Recovery before but had never used it.
Was this in the past, lets say, on a factory shipped Lenovo system?
(4)you state: had installed linux but deleted it and installed Windows again. I also have a 21gb partition not even being used
===
It appears to me, your HDD had a system on it. I see Ubuntu mentioned in your other posts. Your HDD had multiple parttions on it, including the 21GB partition. Then you decided to install a retail version of windows 7 pro.
During a install of retail windows, you have to pay close attention as to where it will install.
http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
Note steps 7 and 8.
It appears you did the windows install ON TOP of existing HDD, with preexisting partitions.
===
Rc=6
The simple answer is RNR is already installed. Did you uninstall RNR before the install?
The complex answer:
When RNR install went to add its entries to boot manager,BCD (boot control data), it did NOT like the contents of the BCD, ie other entries parked in the BCD,ie, Linux. It expects to have 2 BCD slots used, windows and windows RE.
===
Give this some thought. See if it matches your situation.
==
I would erase the HDD via a standalone utility, then install win 7 pro retail, and all issues should clear up.
This Erase/delete can be done during windows install. see steps 7 and 8 above. -
Restore and Recovery problem-XP reinstall
I have a N100 laptop that I am trying to reinstall XP operating system. I have the recovery discs. Started the process in the Rescue and Recovery menu. Part way into the process after putting in the first disc the process will go no further. Just to review how I got thru the menu. I chose option Restore my entire hard drive. then selected backup from CD/DVD. then I get a message: to restore from CD/DVD either insert final C disc or insert final discs of recovery discs. nothing happens when inserting the disc. also-when I restart the computer it always goes to the Rescue and Recovery menu. I can't get a normal Windows startup. Any suggestions of how to get at least to a normal Windows startup and avoid getting to the R and R menu or how to re-format the drive?
Hi dawcary,
I dug out my old x32 that has the recovery discs. The version of Recovery is the same as yours.
Booting from the R&R disc it eventually comes to the window with the two options that you describe, plus a third option to restore factory settings. Choosing to restore to factory settings wipes the drive and installs the predesktop. If you reboot at that point, it will go into the predesktop and that window will then only show the two choices that you listed above.
I don't know why yours doesn't show that third option.
At this point, it sounds like the predesktop is installed on your hard drive and nothing else. Rebooting might be bypassing the cd drive and booting into the predesktop. You probably already did this, but it's the only thing I can think of. Put your R&R disc in the cd drive and start the machine. Press F12 at startup and in the list of bootable devices that comes up, choose cd drive. That "should" give you the third option to restore to factory.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
[HELP] Problem with restore and recovery to new host
Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
JayThank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59 -
Full database restore and recovery
Hi all,
All my datafiles are corrupted.
I have a incremental level 0 backup
can i restore and recover the db with this backup?
regards,
premwe went for a point in time recovery
while restoring we received the following error.
Full Database restoration failed with error
ORACLE error from target database:
ORA-00600: internal error code, arguments: [2103], [0], [0], [1], [900], [], [], []
ORA-06512: at "SYS.X$DBMS_BACKUP_RESTORE", line 5157
ORA-06512: at line 1
released channel: GMUP1
released channel: GMUP2
released channel: GMUP3
Please help us in this regard -
Hello.
Guys I`m pretty new to Oracle and I been trying to restore our backup from Live Database to Our Test Database.
This is what i did.
After installing the Oracle 11g (11.2.0) on our Rhel6 environment, I try to create the folder structure to Test Server same as on Live Server.
After that I "startup nomount pfile='directory'" then created the spfile.
Then I copy the backupset and control file from Live Server to Test Server and restore the control file.
I alter Database to mount mode then go to rman to restore Database.
It all goes well but when I try to recover Database I receive an error.
This is the Error = RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 8929 and starting SCN of 811164225283.
I try to ignore this error and proceed to opening the database;
Alter Database Open resetlogs.
But then again I receive this error.
ORA-01092: ORACLE instance terminated. Disconnection forced
ORA-00704: bootstrap process failure
ORA-39700: database must be opened with UPGRADE option
Process ID: 8020
Session ID: 3 Serial number: 4461
Can some one please help me on how to do this?
I`m really new to oracle and I dont know what to do.user9176069 wrote:
Sir,
Thanks for your assistant.
I have successfully restore the Database.
Now my problem is after recovery I cannot access the EM.
Here is the error shown.
"503 Service Unavailable
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details."
Is this the cause of my recovery?
Should I turn off EM first before I recover?Just to expand on what Hemant said, the dbcontrol has two parts. One is the repository, which is a bunch of tables in the database. The other is the configuration, which is a bunch of files buried under ORACLE_HOME. The two have to be in sync in ways I don't fully understand, but when you replicate a database from one host to another, especially if any kind of database rename is involved, you are getting the repository from the source system and laying it down with the configuration on the target system. Bottom line, exactly as Hemant said, drop and recreate at least the repository. I do both the repository and the config. -
T42 HD replaced, can't get restore and recovery disc to work properly
Hello Support Team!
I purchased a ThinkPad from a company going out of business and was happy with it until the hard drive started to freak out. I replaced the hard drive with a new Western Digital 250 GB and ordered the recovery discs from the place in Atlanta. The discs arrived and I thought I was ready for my new computer. I'm following all the directions in the install, changing the startup to boot from the CD. I get the Recovery Welcome Screen and try to click on Restore Factory Settings. At this point, I get a screen that says "In order to proceed, your system must be rebooted". I haven't gotten past this point now matter what I try.
I like this little machine, but I'm afraid I can no longer breathe new life into it????
Do you have any suggestions?
Thanks!
slhackett
Solved!
Go to Solution.OK, that's a good start.
Have you wiped the drive before attempting to install the OS? If not, now would be a good time to do it.
Download the PC Doctor for DOS bootable CD, burn a disk and boot from it.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/1ety48ww.exe
Wipe the drive clean (under utilities), run diagnostics on the rest of the system.
If everything comes back clean, re-try installing the OS.
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Can't system restore from recovery partition, please help!
To start my info is:<br><br>HP MINI 210-1003sa<br><br>I have tried accessing recovery manager from the start menu, also tried accessing it by pressing f8, repair computer and f11 system restore isn't lit up as an option to click.<br><br>It says my netbook has no recovery partition yet when I go to my computer drive D is the recovery partition.<br><br>I have also downloaded the hp program that creates a bootable system restore USB stick but when I boot from it it just loads up windows.<br><br>I really need to reset to factory settings ASAP, please help.
Hi Mike:
The second chapter of this saga.
I did order the recovery USB.
I did what it was asking and wiped out the HDD clean.
But the system is still unstable.
It took a very long time to configure itself. Several times I had to run the process again because it would either not boot or it would be just sitting there at the attached screen.
Sometimes it would go to Win8 boot window, but then suddenly come back to the same screen.
It seems that HDD is completly out. What is the warranty on the HDD? This laptop is just two years old.
And a side note: we had to send it for repairs twice already for monitor issues; the keyboard is not flat; there are some loose parts inside. I really expected better quality from such a reputable brand as TOSHIBA.
-Ilya.
Attachments:
DSC_4459.JPG 4332 KB -
My playlist dont show up on my ipod anymore and I can't sync them back. I tried restoring but that didnt work.what do I do? please help thanx.
daxfrompomona,
This is the wrong forum to post on, this is a forum for folks that have Intel based iMacs. According to your profile it indicated you are using an iPod Nano and use Windows Vista. I'd recommend either reposting in the iPod or iTunes for MS Windows forums. -
for some odd resaon all my bookmarks arnt showing at all or wont even add any its all shaded all my bookmarks are gone for some odd reason tryed to reset everything tryed uninstalling firefox then reinstalling with no luck, tryed to under help disable add ons and i get a thing stating cant open firefox cause its already open restart the computer and i have and its getitng old and im getting no were at all,, used to work fine for months and still does on my desktop but not on my laptop now chromien still works fine bookemarks and all but firefox doesnt at all no bookmarks and if i close it and try to re-open it it has a pop up saying its still open but isnt and got to resart the computer getting old folks thanks for the help fixing it soon
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Maybe you are looking for
-
10.10 is installed. Now when plugging the download cable in from my wife Canon T3i camera to my wifes 15 inch Apple laptop it says not compatible with the software. Worked fine before the 10.10 upgrade. However I CAN download my pictures from my Cano
-
Quiet external hard drive for use with Time Machine?
Few questions related to Time Machine: 1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech. 2- Please confirm what s
-
How to execute a Command Prompt command from J2SE code executing on Windows
How to execute a Command Prompt command from J2SE code executing on Windows?? Please help me
-
N8 - applications hangs - camera, music player, vi...
N8 - applications hangs - camera, music player, video player, photos. These applications are hanging very very frequently. i have to restart my phone again and again due to this. i am not happy with this. Can somebody help me on this. Regards
-
A database error occured. The datebase error text is: Error in MDDataSetBW.GetCellData. No roll storage space of length: 1686916 available for internal storage: table blocks.. (WIS 10901)