Restore incremental backups to new server

Hello!
I am trying to create my database on a new server using rman incremental cold backups.
I have already restored my level 0 database, but i am not able to restore the level 1 backup because rman doesn't find it on the new server. I have transported the level 0 and level 1 backup in tar format from the old server to the new one. Also I have not executed recover copy of database with tag 'xxxx' after level 1 backup on the source server , because i want to transport only the incremental files. Can sb help me on this issue?
Thanks in advance!

Hi,
Please follow the below process....
1- Take Level 0 backup with archivelog from Primary machine.
Note:- Auto Cotrolfile backup should be set in parameters setting of RMAN
2- Ship this dackup to another machine(Directory Structure Should be same , If directory Strucuture is different then use set new name option while restore)
3- STARTUP WITH NOMOUNT to second machine.
4- connect rman
5- RESTORE CONTROLFILE FROM AUTOBACKUP;(All backup files should be placed at same location as on primary server , if Location is different then use RESTORE CONTROLFILE FROM 'backup file'
6- MOUNT THE DATABASE
7- RESTORE DATABASE
8 -RECOVER DATABASE
After this go to primary machine do some updations and take INCREMENTAL LEVEL 1 BACKUP
Move all files to New machine
1-STARTUP NOMOUNT
2- RESTORE CONTROLFILE FROM AUTOBACKUP;(All backup files should be placed at same location as on primary server , if Location is different then use RESTORE CONTROLFILE FROM 'backup file'
Note:- This time controlfile should bw retored from New backup;
3- MOUNT THE DATABASE;
4- RECOVER DATABASE;( This time no need to restore database again).
Hope this will help
Thanks & Regards
Rahul Sharma
Database Administrator
IndiaMART InterMESH Ltd.

Similar Messages

Restore RMAN backup on new server

Hi
I took RMAN backup of a database with control file autobackup on...I copied the backup
to a new server restored the spfile from the backup and modified the parameters
bdump,udump,control file because the directory structure is different from the original
machine.I restored the control file and it was restored properly.
Now I need to restore the datafiles in the new path so I used set newname and switch
but I get some error ....I have posted the error please look at it
RMAN> run
2> {
3> set newname for datafile 1 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01.DBF';
4> set newname for datafile 2 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01.DBF';
5> set newname for datafile 3 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSAUX01.DBF';
6> set newname for datafile 4 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\USERS01.DBF';
7> set newname for datafile 5 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF';
8> set newname for datafile 6 to 'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01.DBF';
9> set newname for datafile 7 to
'E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_AUDIT01.DBF';
10> restore database;
11> switch datafile all;
12> recover database;
13> }
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 11-NOV-10
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to E:\ORACLE\METAGRID\ORADATA\METAGRID\SYSTEM01.DBF
restoring datafile 00002 to E:\ORACLE\METAGRID\ORADATA\METAGRID\UNDOTBS01.DBF
restoring datafile 00005 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSDATA_01.DBF
restoring datafile 00006 to E:\ORACLE\METAGRID\ORADATA\METAGRID\TSIDX01.DBF
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/11/2010 12:38:24
ORA-19693: backup piece E:\RMAN\DB_0FLSLJH1_1_1 already included

Try to clear and recatalog the backups to be used, before the restore:
rman target /
crosscheck backup;
delete expired backup;
catalog start with 'path_to_your_backup';

How to restore from an incremental backup when new datafiles are added

1) Source - We have a base backup and then take differential (LEVEL 1) backups every day. Due to business needs, new datafiles keep added daily in the database. So you will see an incremental backup having new datafiles that got created after the LEVEL 0 backup.
2) Destination - We want to restore this database in the destination host "continiously".
a) I first restored from the BASE FULL - LEVEL 0 . This was successful (restored and recovered, but did not OPEN the database)
b) But restoring a LEVEL 1 now on top of the already restored LEVEL 0 makes the restore start all over again if there are NEW DATAFILES added after the LEVEL 0 backup in the source database.
This is not a problem when no new datafiles are added/modified between the "BASE" and "LEVEL 1" backup.
So how do you "just restore only the new datafiles" instead of "starting from BASE LEVEL 0 restore" again " ?
-Thanks
Srini

Hi Srini,
So how do you "just restore only the new datafiles" instead of "starting from BASE LEVEL 0 restore" again " ?The recovery process after the restore should add the newly created datafiles on the destination host.
Can you check by querying v$datafile in mount mode and post the output?
Regards,
Tycho

Move Publisher backup to new server( Cold Standby Server) ?

We have CUCM cluster consist of 1 publisher, 4 subscriber and have installed a new node like another cluster's publisher(with diferent ip address from existing publisher) . When existing publisher goes down we will move publisher backup to new server and change publisher ip address to new server on existing subscribers.
is it posible ?
Our aim is using new server for publisher down issue.(like cold standby server but diferent ip address from existing publisher)
Or is there any better way to install publisher backup on on branch? When publisher goes down we will use the new server like publisher.

Hi
Re: NTP... you can have multiple NTP servers assigned, and only the primary NTP server is used for license MAC generation. As such, I would:
1) set the primary NTP server to be the real NTP address you want to use. This will not be accessible when you build the server with the old servers' IP.
2) set the secondary NTP server to an accessible NTP server. I do this by setting up NTP on the server you serve the SFTP backup file from. I use Meinberg NTP if this is a Windows box, it's free.
That way you can build the server (primary NTP not accessible, but secondary is so it's fine). Then after the restore, change IP address and it will start using the primary NTP server.
I presume deployment type refers to product and role .e.g. a CUCM Publisher, not a CUC server or CUCMBE publisher.
Aaron HarrisonPrincipal Engineer at Logicalis UK
Please rate helpful posts...

Restoring incremental backup in QAS_ECC6_Ora_10G_Unix

Dear All,
We have restored PRD data in QAS about 4 months back upto 2009. Now we wish to restore the production data for the months of Jan to Apri;2010 in QAS. We can not afford restoring PRD whole data in QAS as it is more than 1.5 TB and it will take at least 3 to 4 days. We have the incremental databackup for these months with us (RMAN backup). Even we do have archive logs for this period.
Is it possible to apply archive logs in QAS (database open state), I believe we can not do this once we open the database.
How to restore incremental backup in QAS?
Thanks
S@pm@n

Hi,
Is it possible to apply archive logs in QAS (database open state), I believe we can not do this once we open the database.
Yes , you are right , you can not apply redo logs once database is open.
For restoring incremental backup also you need 0 level database restore first(You can not restore incremental backup of PRD directly on QAS) , so every case you need to restore almost 1.5TB of data.
Regards,

What permission is needed for a login to access the restored database(backup from different server)

what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.

Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Restoring Rman backup on New Host with different directory structure

Hi,
I have a following scenario to clone the database.
1. clone the database on new server
2. source is non - ASM and target is ASM
3. On source incremental level 0 backup taken on disk connecting to catalog, the backup is moved to target host to different directory structure
4. source is running on 32-bit Linux two node Rac and Target is running on 64-bit Linux two node Rac
I did the following steps and getting below error:
1. I copied incremental Level 0 backup to target server(where we need to build new db) to different directory structure
2. On target i created pfile and build the instance, as dbf file are in multiple locations in source i put following tow parameters in init.ora of target database
*.db_file_name_convert =(/u02/oradata/app1p/,+QADATA2/udev/datafile),(/u03/oradata/app1p/,+QADATA1/udev/datafile),(/u12/oradata/app1p/,+QADATA1/udev/datafile,),(/u99/oradata/app1p/,+QADATA1/udev/datafile),(/u09/oradata/app1p/,+QADATA1/udev/datafile),(/u14/oradata/app1p/,+QADATA1/udev/datafile),(/u07/oradata/app1p/,+QADATA1/udev/datafile),(/u06/oradata/prod/,+QADATA1/udev/datafile'),(/u05/oradata/app1p/,+QADATA1/udev/datafile)
*.log_file_name_convert =("/u99/oradata/app1p/","+QADATA2/udev/onlinelog/")
3. connected to rman -->> started db in nomount -->> restored the controlfile --> cataloged the backup piece and then i am trying to restore
All the above steps i did using the Doc id *How To Restore Rman Backups On A Different Node When The Directory Structures Are Different [ID 419137.1]*
script i am using is :
RMAN> run {
2> set until time "to_date('DEC/20/2010 05:30:00','Mon/DD/YYYY HH24:MI:SS')";
3> allocate channel c1 device type disk;
4> allocate channel c2 device type disk;
5> allocate channel c3 device type disk;
6> allocate channel c4 device type disk;
7> set newname for datafile 1 to '+QADATA1/UDEV/DATAFILE';
8> set newname for datafile 2 to '+QADATA1/UDEV/DATAFILE';
9> set newname for datafile 3 to '+QADATA1/UDEV/DATAFILE';
10> set newname for datafile 4 to '+QADATA1/UDEV/DATAFILE';
11> set newname for datafile 5 to '+QADATA1/UDEV/DATAFILE';
12> set newname for datafile 6 to '+QADATA1/UDEV/DATAFILE';
13> set newname for datafile 54 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 63 to '+QADATA1/UDEV/DATAFILE';
14> 15> set newname for datafile 67 to '+QADATA1/UDEV/DATAFILE';
16> set newname for datafile 68 to '+QADATA1/UDEV/DATAFILE';
17> set newname for datafile 50 to '+QADATA1/UDEV/DATAFILE';
18> set newname for datafile 39 to '+QADATA1/UDEV/DATAFILE';
19> set newname for datafile 38 to '+QADATA1/UDEV/DATAFILE';
20> set newname for datafile 7 to '+QADATA1/UDEV/DATAFILE';
21> set newname for datafile 9 to '+QADATA1/UDEV/DATAFILE';
22> set newname for datafile 8 to '+QADATA1/UDEV/DATAFILE';
23> set newname for datafile 11 to '+QADATA1/UDEV/DATAFILE';
24> set newname for datafile 10 to '+QADATA1/UDEV/DATAFILE';
25> set newname for datafile 66 to '+QADATA1/UDEV/DATAFILE';
26> set newname for datafile 48 to '+QADATA1/UDEV/DATAFILE';
27> set newname for datafile 47 to '+QADATA1/UDEV/DATAFILE';
28> set newname for datafile 12 to '+QADATA1/UDEV/DATAFILE';
29> set newname for datafile 13 to '+QADATA1/UDEV/DATAFILE';
30> set newname for datafile 14 to '+QADATA1/UDEV/DATAFILE';
31> set newname for datafile 15 to '+QADATA1/UDEV/DATAFILE';
32> set newname for datafile 16 to '+QADATA1/UDEV/DATAFILE';
33> set newname for datafile 18 to '+QADATA1/UDEV/DATAFILE';
34> set newname for datafile 17 to '+QADATA1/UDEV/DATAFILE';
35> set newname for datafile 19 to '+QADATA1/UDEV/DATAFILE';
36> set newname for datafile 69 to '+QADATA1/UDEV/DATAFILE';
37> set newname for datafile 60 to '+QADATA1/UDEV/DATAFILE';
38> set newname for datafile 59 to '+QADATA1/UDEV/DATAFILE';
39> set newname for datafile 55 to '+QADATA1/UDEV/DATAFILE';
40> set newname for datafile 53 to '+QADATA1/UDEV/DATAFILE';
41> set newname for datafile 44 to '+QADATA1/UDEV/DATAFILE';
set newname for datafile 22 to '+QADATA2/UDEV/DATAFILE';
42> 43> set newname for datafile 21 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 20 to '+QADATA2/UDEV/DATAFILE';
44> 45> set newname for datafile 72 to '+QADATA2/UDEV/DATAFILE';
46> set newname for datafile 70 to '+QADATA2/UDEV/DATAFILE';
47> set newname for datafile 65 to '+QADATA2/UDEV/DATAFILE';
48> set newname for datafile 64 to '+QADATA2/UDEV/DATAFILE';
49> set newname for datafile 57 to '+QADATA2/UDEV/DATAFILE';
50> set newname for datafile 56 to '+QADATA2/UDEV/DATAFILE';
51> set newname for datafile 49 to '+QADATA2/UDEV/DATAFILE';
52> set newname for datafile 45 to '+QADATA2/UDEV/DATAFILE';
53> set newname for datafile 26 to '+QADATA2/UDEV/DATAFILE';
54> set newname for datafile 25 to '+QADATA2/UDEV/DATAFILE';
55> set newname for datafile 24 to '+QADATA2/UDEV/DATAFILE';
56> set newname for datafile 23 to '+QADATA2/UDEV/DATAFILE';
57> set newname for datafile 27 to '+QADATA2/UDEV/DATAFILE';
58> set newname for datafile 28 to '+QADATA2/UDEV/DATAFILE';
59> set newname for datafile 29 to '+QADATA2/UDEV/DATAFILE';
60> set newname for datafile 30 to '+QADATA2/UDEV/DATAFILE';
61> set newname for datafile 73 to '+QADATA2/UDEV/DATAFILE';
62> set newname for datafile 32 to '+QADATA2/UDEV/DATAFILE';
63> set newname for datafile 31 to '+QADATA2/UDEV/DATAFILE';
64> set newname for datafile 34 to '+QADATA2/UDEV/DATAFILE';
65> set newname for datafile 33 to '+QADATA2/UDEV/DATAFILE';
66> set newname for datafile 35 to '+QADATA2/UDEV/DATAFILE';
67> set newname for datafile 36 to '+QADATA2/UDEV/DATAFILE';
68> set newname for datafile 37 to '+QADATA2/UDEV/DATAFILE';
69> set newname for datafile 51 to '+QADATA2/UDEV/DATAFILE';
70> set newname for datafile 43 to '+QADATA2/UDEV/DATAFILE';
71> set newname for datafile 40 to '+QADATA2/UDEV/DATAFILE';
72> set newname for datafile 41 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 71 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 58 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 52 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 46 to '+QADATA2/UDEV/DATAFILE';
set newname for datafile 42 to '+QADATA2/UDEV/DATAFILE';
73> 74> 75> 76> 77> 78> set newname for datafile 62 to '+QADATA2/UDEV/DATAFILE';
79> set newname for datafile 61 to '+QADATA2/UDEV/DATAFILE';
80> set newname for datafile 74 to '+QADATA2/UDEV/DATAFILE';
81> restore database;
82> switch datafile all;
83> recover database;
84> alter database open resetlogs;
85>
86> release channel c1;
87> release channel c2;
88> release channel c3;
89> release channel c4;
90> }
Getting the following error, copied lines from the error i am getting.
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 27-DEC-10
released channel: c1
released channel: c2
released channel: c3
released channel: c4
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 12/27/2010 08:09:08
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 74
RMAN-06100: no channel to restore a backup or copy of datafile 73
Please advice...
Thanks,
Tanveer Mohammed

If you would like, please refer the link:-
http://gavinsoorma.com/2010/04/creating-an-asm-duplicate-database-from-a-non-asm-database/

How to Restore Control file to New Server

I want to test my backup by restoring the full backup of my production database on a separate test server.
I have taken following action for restore to test server:
•     Copy full backup to Test Server on same folder where it was in Production Server.
•     Copy parameter file to Test Server. (Edit control file location on it)
•     Connect Rman
•     Set DB with new DBID
•     Startup Nomount (from new parameter file)
RUN
ALLOCATE CHANNEL c1 TYPE DISK;
RESTORE CONTROLFILE FROM AUTOBACKUP;
ALTER DATABASE MOUNT;
Then we found following error:
RMAN> RESTORE CONTROLFILE FROM AUTOBACKUP;
Starting restore at 07-NOV-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=9 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20071107
channel ORA_DISK_1: looking for autobackup on day: 20071106
channel ORA_DISK_1: looking for autobackup on day: 20071105
channel ORA_DISK_1: looking for autobackup on day: 20071104
channel ORA_DISK_1: looking for autobackup on day: 20071103
channel ORA_DISK_1: looking for autobackup on day: 20071102
channel ORA_DISK_1: looking for autobackup on day: 20071101
channel ORA_DISK_1: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/07/2007 16:35:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
Can anyone guide me, how to restore control file?
Irfan

RMAN> RESTORE CONTROLFILE FROM AUTOBACKUP;
Starting restore at 07-NOV-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=9 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day:
20071107
channel ORA_DISK_1: looking for autobackup on day:
20071106
channel ORA_DISK_1: looking for autobackup on day:
20071105
channel ORA_DISK_1: looking for autobackup on day:
20071104
channel ORA_DISK_1: looking for autobackup on day:
20071103
channel ORA_DISK_1: looking for autobackup on day:
20071102
channel ORA_DISK_1: looking for autobackup on day:
20071101
channel ORA_DISK_1: no autobackup in 7 days found
RMAN-00571:It seems to me its not finding the contolfile from 7 days before sysdate ,increase the window size using
RMAN>restore controlfile from autobackup maxdays 15;Khurram

My work issued iphone won't restore the backup. New password twist!

My work issued iphone won't restore the backup. I get an error that my password is wrong. I tried variations of all recent passwords. Checked various threads and saw one that suggesting to use the "Change Password" feature under "Encrypt iPhone Backup" as a faster way to find your password. After a few wrong attempts I then successfully changed my backup password and wrote it down!!
Now when I tried to restore my backup with my shiny new password I get the same error that "iTunes could not restore the iPhone "my iphone" because the password was incorrect" The "Encrypt iPhone backup" option is checked and grayed out. I assume the fact its grayed out means its a policy set by my company. I cannot uncheck the "Encrypt iPhone Backup" option. My company IT helpdesk can't help me as they say they don't set a password or force its encryption. The phone has Mobile Iron 5.7.4 app installed as a corporate requirement.
Any ideas? I am using iOS 6.1.3 and I will not update it to iOS 7 since I cannot restore my backup. Learned this the hard way when it wouldn't restore after the iOS 5 to iOS 6 update. I have an iPhone 4s.
Thank you,

This is a problem. We also set a policy which requires users create a backup password. That way if they salvage their computer, someone that buys it at the Thrift store won't be able to access what might be company data. The problem is that the password is only required one time, when the initial backup is made, and it might be a year or more before you need to use it to do a restore. Here is an article which may help out...at least with some ideas on password ideas...http://support.apple.com/kb/TS5162
If you can't remember it, you can always transfer your content to your computer, music, apps, photo's etc, then setup the device as new and transfer the content back. This won't allow you to get various settings, and points on games, etc, but at least you will have the really really important stuff. If you are connected to an enterprise mail server, that will restore all of your mail, contacts and calendar.

Restoring Incremental Backup using Netbackup

Hi,
Need your help. We have a backup of our Oracle 10g Database(one full backup and one incremental backup). The full backup (level0) is done by Netbackup and the incremental backup is done by local rman.
Now we want to restore the database. I have modified the script of Netbackup to restore the controlfile of incremental backup and allocate 2 channels for tape and disk. Our incremental backup resides in disk. Is the script we used below correct?
RUN {
ALLOCATE CHANNEL ch00 TYPE DISK;
send 'NB_ORA_CLIENT=prod01, NB_ORA_SERV=NAS';
RESTORE CONTROLFILE FROM '/rman/backup/incremental/ctl_PROD_c-86955024-20101221-
03';
ALTER DATABASE MOUNT;
RELEASE CHANNEL ch00;
RUN {
ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE';
ALLOCATE CHANNEL ch01 TYPE DISK;
send 'NB_ORA_CLIENT=prod01, NB_ORA_SERV=NAS';
#SET UNTIL SEQUENCE 138730 thread 1;
RESTORE DATABASE;
RECOVER DATABASE;
RELEASE CHANNEL ch00;
RELEASE CHANNEL ch01;
thanks,
Benjo

Hi benjo,
You cannot allocate two types of channels at the same time so you should try a three step approach.
(Every time create a new connection to the target.)
Restore controlfile
No need for:
send 'NB_ORA_CLIENT=prod01, NB_ORA_SERV=NAS';exit
Restore database from tape.
remove from your second run block
ALLOCATE CHANNEL ch01 TYPE DISK;
RECOVER DATABASE;
RELEASE CHANNEL ch01;exit
Than create a recover command with disk channels
basicly remove the tape channel and restore commands from your second run block and add
alter database open resetlogs;Regards,
Tycho

TimeMachine: Restore incremental backup

When restoring from a TimeMachine backup to a new hard disk, only "full backups", which are a bit outdated, are shown. Are the incremental backups restored after the "full backup" restore?

bbonn wrote:
I'm in the same situation, and to clarify: Time Machine does, in fact, keep full vs. incremental backups, confirmed by the AppleCare support manager I am working with on this problem.
No. There's a misunderstanding.
Time Machine only makes a full backup once; all thereafter are incrementals, of what's new or changed.
But because of the way they're all linked together, every backup is, in effect, a full one. Seems odd, but see the tan box in How Time Machine works its Magic for an explanation.
However, it sounds like you may have been bitten by a bug we recently discovered, and Apple either doesn't recognize yet or hasn't told the Support folks about. Something (we don't know what yet), is telling Time Machine not to back up several top level system folders. Without them, of course, those backups aren't complete, so don't appear on the selection window. See #D10 in Time Machine - Troubleshooting for details.
if so, you should be able to get most of your stuff back, at least everything from your home folder. We can help with that if necessary.
What's definitely confirmed is that any local-only snapshots are lost when the hard drive is lost, which begs the question: Why would Apple choose to do that in the first place when a perfectly-good external backup location is connected?
Those are made on laptops only, whether the external is connected or not, so you'll have access to them if necessary. Think of them as temporary, expendable Versions for files that don't have regualar Versions. See Time Machine - Frequently Asked Question #30 for details.

Restore Rman backup on another server

Hi.,
I am taking oracle 10g rman Incremental backup level 1
on Sunday I am taking full backup.
No Repository catlog is used.
I want to restore all the database using the backup of RMAN on the another server .
Can you tell mi whats are the step to restore on another server .

http://download-uk.oracle.com/docs/cd/B19306_01/backup.102/b14191/rcmrecov002.htm#sthref723

Restoring the backup on other server with different patch level

Hi Gurus,
I have one HP-UX B11.31 server which holds ORACLE software with 10.2.0.4 patch level, and I have restored one database with the same patch level from HP DataProtector successfully. Now, I want to restore two node RAC database backup with Oracle Patch level of 10.2.0.2 into the Restore server which is of 10.2.0.4 patch level, the RAC database uses ASM, here are the steps which I am going to follow;
1. Create a new database with the same schema as like the RAC database in ASM.
2. Restore & Recover the RAC database backup from Data Protector.
But, I have one question, can I restore & recover the backup which is in lower grade Oracle software patch level i.e; 10.2.0.2 on a higher grade Oracle software patch level ie; 10.2.0.4 ???
?:|
Even after restoring & recovering can the database will work? PLEASE guide.
Thanks in Advance.

Thanks again!!!
The point of upgrading the database comes when there is already a database and one is upgrading the ORACLE software version and then upgrading the database to its version using the scripts you suggest.
Here is the scenario where I have to restore and recover a 10.2.0.2 RAC database backup on 10.2.0.4 sotware version,
*my question is that, whether there will be any conflict of patch version as the Oracle Brain will be of the latest version? Oracle software will successfully restore and recover the database backup with a lower patch version? or it will throw any error when restoring the backup like compatibility unmatched between the software and the backup you are trying to restore & recover?*
yes the RAC database is in ASM.
Thanks & Regards

Restore database Error when restoring database to a new server

Hi folks,
I am oracle 10g on an AIX server (5.3).
I created an rman backup of a database. I then copied it over to a new server where I am trying to restore it (I just created the backup today). However, I am getting the error below.
Essentially, I used an initdb.ora file to create an instance of the database, and mounted it, on the new server. And then I ran a simple "restore database" command, the end of which is displayed below, with a "Restore complete. ..."
I have looked up this error (ora-01152) online and I cannot find a scenario which best provides me with a fix to my problem, about the file not being restored from a sufficiently old backup. Could any one help please?
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/qconfig/dbf/QCONFIG_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 06/14/2010 17:48:12
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '+DGROUP1/testdb/datafile/system.751.721679898'Edited by: efachim2 on Jun 15, 2010 2:19 AM

I ran only as below because I copied over the backup right after it finished, when there were no archivelogs.
RMAN> restore database;
Starting restore at 14-JUN-10
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=651 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=650 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=649 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=648 devtype=DISK
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00002 to +DGROUP1/testdb/datafile/undots1.667.721227421
channel ORA_DISK_1: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00007 to +DGROUP1/testdb/datafile/a1_x.641.721227553
restoring datafile 00009 to +DGROUP1/testdb/datafile/ent_sm01_x.659.721227557
restoring datafile 00013 to +DGROUP1/testdb/datafile/in01_x.657.721227569
restoring datafile 00015 to +DGROUP1/testdb/datafile/cs01_x.656.721227571
restoring datafile 00016 to +DGROUP1/testdb/datafile/cs01_d.650.721227559
restoring datafile 00021 to +DGROUP1/testdb/datafile/h01_x.644.721227575
restoring datafile 00023 to +DGROUP1/testdb/datafile/doc01_x.647.721227575
restoring datafile 00025 to +DGROUP1/testdb/datafile/og01_x.645.721227577
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full
channel ORA_DISK_3: starting datafile backupset restore
channel ORA_DISK_3: specifying datafile(s) to restore from backup set
restoring datafile 00003 to +DGROUP1/testdb/datafile/sysaux.662.721227423
restoring datafile 00006 to +DGROUP1/testdb/datafile/a01_d.639.721227549
restoring datafile 00010 to +DGROUP1/testdb/datafile/ent_lg01_d.666.721227423
restoring datafile 00012 to +DGROUP1/testdb/datafile/in01_d.658.721227511
restoring datafile 00014 to +DGROUP1/testdb/datafile/cs01_d.661.721227521
restoring datafile 00019 to +DGROUP1/testdb/datafile/ndata_x.654.721227423
restoring datafile 00022 to +DGROUP1/testdb/datafile/doc_01_d.660.721227531
restoring datafile 00029 to +DGROUP1/testdb/datafile/in01_x.642.721227471
channel ORA_DISK_3: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_4: starting datafile backupset restore
channel ORA_DISK_4: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DGROUP1/testdb/datafile/system.655.721227423
restoring datafile 00004 to +DGROUP1/testdb/datafile/users.653.721227453
restoring datafile 00005 to +DGROUP1/testdb/datafile/tools.663.721227423
restoring datafile 00008 to +DGROUP1/testdb/datafile/en_sm01_d.665.721227473
restoring datafile 00018 to +DGROUP1/testdb/datafile/n_data_d.664.721227423
restoring datafile 00020 to +DGROUP1/testdb/datafile/hfig01_d.652.721227527
restoring datafile 00024 to +DGROUP1/testdb/datafile/og01_d.651.721227535
restoring datafile 00028 to +DGROUP1/testdb/datafile/in1_d.646.721227469
channel ORA_DISK_4: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_19_1_721669509_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:27
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00017 to +DGROUP1/testdb/datafile/cs_lg01_x.640.721227579
restoring datafile 00026 to +DGROUP1/testdb/datafile/am1_d.643.721227581
restoring datafile 00027 to +DGROUP1/testdb/datafile/am1_x.671.721227581
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_20_1_721669624_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:00:07
channel ORA_DISK_2: starting datafile backupset restore
channel ORA_DISK_2: specifying datafile(s) to restore from backup set
restoring datafile 00011 to +DGROUP1/testdb/datafile/ent_lg01_x.648.721227421
channel ORA_DISK_2: reading from backup piece /ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full
channel ORA_DISK_1: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_16_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_1: restore complete, elapsed time: 00:02:30
channel ORA_DISK_3: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_17_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_3: restore complete, elapsed time: 00:03:15
channel ORA_DISK_4: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_18_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_4: restore complete, elapsed time: 00:03:30
channel ORA_DISK_2: restored backup piece 1
piece handle=/ora_backup/prev_0/testdb/db/testdb_15_1_721669501_2010_06_14_15:44_Mon_full tag=2010_06_14_15:44_MON_FULL
channel ORA_DISK_2: restore complete, elapsed time: 00:05:00
Finished restore at 14-JUN-10
RMAN> alter database open resetlogs;

How do i restore a backup to new iphone in itunes, how do i restore a backup to new iphone in itunes

I just got a new iphone changing carriers. I did a backup of my old one to itunes, how can i restore that backup onto the new phone to include all my stuff (i.e. - apps, photos, email setup, etc)

http://support.apple.com/kb/HT2109

Restore incremental backups to new server

Similar Messages

Maybe you are looking for