Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed

Restore Log with Standby Mode on Virtual VHDX disk cause a 9004 error in SQL Server 2014 ( test performed on Web edition and Standard version )
Similar Bug for SQL 2008R2 is already registered with number hotfix
KB2987585
Restore operations always fail in Hyper-V R2 Server in situations ( text copied from
KB2987585 page )
The primary database has its transaction log file (.ldf) stored on a disk that has "Bytes per Physical Sector" set as 512 bytes.
You take the transaction log backups of this database, and then you try to restore it by using the standby option on the secondary database.
The secondary database transaction log file (.ldf) is located on a VHDX disk that has "Bytes per Physical Sector" set as 4,096 bytes.
In this scenario, the restore operation fails and returns the following error message:
Error: 9004, Severity: 16, State: 6.
An error occurred while processing the log for database '<databasename>'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
After this error occurs, the secondary database goes into a suspect state.
So restore from Generation1 to Generation2 machine ( where only VHDX disk is possible ) always fails and database is not accessible.
Please create hotfix for SQL 2014 version

Please create hotfix for SQL 2014 version
This is a community forum, no one of use can create a hotfix for SQL Server.
Raise a case at Microsoft Support or create an entry at MS Connect:
http://connect.microsoft.com/SQLServer
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

Log shipping: RESTORE LOG WITH CONTINUE_AFTER_ERROR?

Hi experts,
I found the restore log on standby node failed with the error message like below. What happen? How do I prevent this error? How do I repair(rebuild a new log shipping DB)?
--- messages ---
Msg 4360, Level 16, State 1, Line 1
RESTORE LOG WITH CONTINUE_AFTER_ERROR was unsuccessful. Execution of the RESTORE command was aborted.
Msg 3013, Level 16, State 1, Line 1
RESTORE LOG is terminating abnormally.
--- errorlog ---
2014-07-16 07:00:00.42 Logon Error: 18456, Severity: 14, State: 38.
2014-07-16 07:00:00.42 Logon Login failed for user 'QCISAP\---'. Reason: Failed to open the explicitly specified database '---'. [CLIENT: <local machine>]
2014-07-16 07:01:49.52 spid60 Error: 4360, Severity: 16, State: 1.
2014-07-16 07:01:49.52 spid60 RESTORE LOG WITH CONTINUE_AFTER_ERROR was unsuccessful. Execution of the RESTORE command was aborted.
2014-07-16 07:19:56.38 spid59 FlushCache: cleaned up 247385 bufs with 162904 writes in 278549 ms (avoided 0 new dirty bufs) for db 7:0
2014-07-16 07:19:56.38 spid59 average throughput: 6.94 MB/sec, I/O saturation: 161105, context switches 305229
2014-07-16 07:19:56.38 spid59 last target outstanding: 34, avgWriteLatency 35

One question, have you backup the log file with CONTINUE_AFTER_ERROR?
Have you seen in ERROR.LOG some info regarding the backup log which was forced by CONTINUE_AFTER_ERROR???
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Problems with standby mode in Windows XP

Every time I try to put my computer in standby mode while in Windows the entire computer shuts down. I can't even manually turn on the computer in Mac until I press the power button mulitple times. Anyone have any suggestions?

Tony, some posters have reported that the XP drivers for the Vostro 1500 will work for the M1330.
Vostro 1500 XP downloads
However before installing any Sigmatel driver after an OS installation you should follow this order of driver installation:
a. Install Dell Notebook System Software R154270 (click the + sign next to System Utilities). Restart.
b. Next install the Intel Mobile Chipset driver 153997 (click the + sign next to Chipset). Restart.
c. Finally re-install the Sigmatel audio driver R158235 (click the + sign next to Audio).
Some v1500 users have reported that they had to "uninstall an unknown PCI device in Device manager first , then install the driver normally".
Rarely there will still be a problem with the installation at this point (in XP). In those cases follow this tip from forum member rpilT2005: check in the Device Manager for a "PCI Device" with a yellow question mark next to it, under the "System Devices" grouping. Hit 'update driver' on that one, and it should find the driver.
A previous poster was able to get his audio working by following the above instructions more or less He said that after installing the Chipset driver he next uninstalled the unknown PCI device. He let Windows look for a new driver but he said he had to point it to the folder with the driver. Then he wrote, "Xp still said that an error occurred and the device may not work properly, but it did work fine and I also don't have a yellow question mark..." I know this is confusing.
Jim

If my logged with my account, why does it asked me for someone's else password for an update?

So, I bought my mac about a month ago and I already logged in with my icloud account and my appstore acount, and all that multiple accounts that are the same.
I've got come updates on the appstore but I CANT UPGRADE THEM, I am logged with my account but when i click the upgrade button it just ask for the password of another account (the account of the place where I bought it) I've sign out and in multiple times and it stills happens, I can't upgrade ****, eather change the other users account, IT WONT LET ME, I mean, if I am logged with my account why the upgrades are with some different email.
Can I change that? It really annoys me.
(I'm not good at writing in english, but I really hope someone can help me)

Delete those applications and then download them from your account.
(100610)

Any known issues with SCOM 2007 R2 after upgrading to SP2 for SQL 2008 R2 ?

Are there any known or reported issues in SCOM 2007 R2 after installing SP2 for SQL server 2008 R2 ? Currently running RTM version of SQL Server 2008 R2.

Hi There,
As a testing purpose long time back i did this. I did this step by step
I installed SCOM 2007R2 with SQL server 2008 with SP1 initially.
Then upgraded to 2008 SP2.
Then upgraded to 2008 SP3
Then upgraded to 2008 R2.
Then upgraded to 2008 R2 SP1
Finally to SP2
I dint find any issue.
I just kept on adding service packs upon each other. Except for upgradation to 2008 to 2008 r2 i used the installation media then the SP1 & SP2 files. to upgrade to service packs.
If you want to go to directly SP2 i would suggest you install SP1 and then install SP2.
Every thing is fine in the LAB equipment i tried this.
Gautam.75801

Adding online redo logs with standby database in place

Hi group,
I have decided to add one new member to my existing redo log groups and an additional redo log group to my primary database.
That change went ok without problems. I assumed that with standby_file_management=auto the equivalent online redo logs are created on the standby database. But this is not the case.
The documentation is unclear about this point and I did not find anything suitable on metalink. The docs suggest to cancel managed recovery on the standy, setting standby_file_management to MANUAL and then adding online logs, quote:
"To add an online redo log, use a SQL statement such as this:
SQL> ALTER DATABASE ADD STANDBY LOGFILE 'prmy3.log' SIZE 100K;"
This however - IMO - adds a new STANDBY redo log to the standby database, what I need is an ONLINE redo log.
Does anybody have some experience to share here?
Facts:
Solaris 8
Oracle 9.2.0.6
Thanks!
Martin

OK, for those who come across the same problem.
You need to create a new standby controlfile, copy it as well as any new online redo log from production to the standby environment.
Once the files are in place, start the standby as normal and open it read only to see if everything is ok:
startup nomount
alter database mount standby database;
alter database open read only
Only when there are no errors in your alert.log you are safe.
Martin

Restore fails with "Firmware update failure. Disk write Error" message

I am going totally bonkers with this one. My Shuffle stopped working suddenly.
My iTunes was not able to read the contents of the iPOD and there seems to be a corrupt filesystem. After reviewing various posts, I have tried the following with little success:
1. Tried Restore using the Updater tool that came with the Shuffle (2005-09-23). I kept getting the "Firmware update failure. Disk write Error"
2. Downloaded the new updater tool (2006-03-23) and tried restore again. I got the same error message again.
3. Tried formatting using Windows format, it is not able to complete the format
4. Tried chkdsk. Get an error message saying "CHKDSK is not available for RAW drives."
5. Tried connecting it to a different computer and tried pretty much the same steps. Similar results.
I am using USB 2.0 both on my current Thinkpad as well as the other computer I tried with.
I am totally clueless and am not sure how to go about fixing this one. Though there have been lots of posts about this, I haven't been able to find a solution that works for me. Any thing else that I may have missed out which I can try?
Thanks,
Kris
Thinkpad Windows XP Pro

hiya!
just checking. have you worked through the possibilities from this document yet?
"Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
given that you're connecting to a laptop, we'd better check on this possibility too:
iPod not recognized when connected to Windows laptop over USB
... and even though you aren't using a Toshiba, this technique might be worth a try (if all else fails):
iPod not recognized correctly on Toshiba laptop
love, b

Can't open Firefox with Yahoo home page. Have done so for years. Needs to be fixed.

Received error message: An error occurred during a connection to www.yahoo.com. security library: improperly formatted DER-encoded message. (Error code: sec_error_bad_der)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
Been using Yahoo as my home page for years and years and all of a sudden it's a problem. I can open it easily on Safari browser even though I don't have an Apple computer. So the problem has to be with Firefox, not Yahoo. I've read all of your solutions, tried troubleshooting them, and it still doesn't work. I contacted Yahoo and they haven't responded, probably because the problem isn't on their end, but on Firefox.
Please fix or I will have to stop using Firefox as my primary browser.

I copied all of this. BTW I need something very basic as I am not tech savvy at all. Thank you.
Application Basics
Name Firefox
Version 33.1
Update History
User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
Profile Folder
Enabled Plugins about:plugins
Build Configuration about:buildconfig
Memory Use about:memory
Multiprocess Windows 0/4
Crash Reports for the Last 3 Days
Report ID Submitted
All Crash Reports (including 1 pending crash in the given time range)
Extensions
Name Version Enabled ID
Avast Online Security 10.0.2502.149 false [email protected]
McAfee Security Scan Plus 1.0 false {e4f94d1e-2f53-401e-8885-681602c0ddd8}
McAfee SiteAdvisor 3.7.1 false {4ED1F68A-5463-4931-9384-8FFF5ED91D92}
Graphics
Adapter Description Intel(R) Graphics Media Accelerator HD
Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
Adapter RAM Unknown
Device ID 0x0046
Direct2D Enabled Blocked for your graphics driver version. Try updating your graphics driver to version 8.1500.1000.2202 or newer.
DirectWrite Enabled false (6.2.9200.16571)
Driver Date 1-25-2010
Driver Version 8.15.10.2057
GPU #2 Active false
GPU Accelerated Windows 4/4 Direct3D 11 (OMTC)
Vendor ID 0x8086
WebGL Renderer Google Inc. -- ANGLE (Intel(R) Graphics Media Accelerator HD Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote true
AzureCanvasBackend skia
AzureContentBackend cairo
AzureFallbackCanvasBackend cairo
AzureSkiaAccelerated 0
Important Modified Preferences
Name Value accessibility.typeaheadfind.flashBar 0
browser.cache.disk.capacity 358400
browser.cache.disk.smart_size.first_run false
browser.cache.disk.smart_size.use_old_max false
browser.cache.frecency_experiment 3
browser.places.smartBookmarksVersion 7
browser.sessionstore.upgradeBackup.latestBuildID 20141106120505
browser.startup.homepage https://www.yahoo.com/#
browser.startup.homepage_override.buildID 20141106120505
browser.startup.homepage_override.mstone 33.1
dom.mozApps.used true
extensions.lastAppVersion 33.1
font.internaluseonly.changed false
font.minimum-size.x-western 13
media.gmp-gmpopenh264.lastUpdate 1414111943
media.gmp-gmpopenh264.version 1.1
media.gmp-manager.lastCheck 1417289586
network.cookie.prefsMigrated true
places.database.lastMaintenance 1417289587
places.history.expiration.transient_current_max_pages 73519
plugin.disable_full_page_plugin_for_types application/pdf
plugin.importedState true
print.printer_HP_Deskjet_F4500_series.print_bgcolor false
print.printer_HP_Deskjet_F4500_series.print_bgimages false
print.printer_HP_Deskjet_F4500_series.print_colorspace
print.printer_HP_Deskjet_F4500_series.print_command
print.printer_HP_Deskjet_F4500_series.print_downloadfonts false
print.printer_HP_Deskjet_F4500_series.print_duplex 1515870810
print.printer_HP_Deskjet_F4500_series.print_edge_bottom 0
print.printer_HP_Deskjet_F4500_series.print_edge_left 0
print.printer_HP_Deskjet_F4500_series.print_edge_right 0
print.printer_HP_Deskjet_F4500_series.print_edge_top 0
print.printer_HP_Deskjet_F4500_series.print_evenpages true
print.printer_HP_Deskjet_F4500_series.print_footercenter
print.printer_HP_Deskjet_F4500_series.print_footerleft &PT
print.printer_HP_Deskjet_F4500_series.print_footerright &D
print.printer_HP_Deskjet_F4500_series.print_headercenter
print.printer_HP_Deskjet_F4500_series.print_headerleft &T
print.printer_HP_Deskjet_F4500_series.print_headerright &U
print.printer_HP_Deskjet_F4500_series.print_in_color true
print.printer_HP_Deskjet_F4500_series.print_margin_bottom 0.5
print.printer_HP_Deskjet_F4500_series.print_margin_left 0.5
print.printer_HP_Deskjet_F4500_series.print_margin_right 0.5
print.printer_HP_Deskjet_F4500_series.print_margin_top 0.5
print.printer_HP_Deskjet_F4500_series.print_oddpages true
print.printer_HP_Deskjet_F4500_series.print_orientation 0
print.printer_HP_Deskjet_F4500_series.print_page_delay 50
print.printer_HP_Deskjet_F4500_series.print_paper_data 1
print.printer_HP_Deskjet_F4500_series.print_paper_height 11.00
print.printer_HP_Deskjet_F4500_series.print_paper_name
print.printer_HP_Deskjet_F4500_series.print_paper_size_type 0
print.printer_HP_Deskjet_F4500_series.print_paper_size_unit 0
print.printer_HP_Deskjet_F4500_series.print_paper_width 8.50
print.printer_HP_Deskjet_F4500_series.print_plex_name
print.printer_HP_Deskjet_F4500_series.print_resolution 1515870810
print.printer_HP_Deskjet_F4500_series.print_resolution_name
print.printer_HP_Deskjet_F4500_series.print_reversed false
print.printer_HP_Deskjet_F4500_series.print_scaling 1.00
print.printer_HP_Deskjet_F4500_series.print_shrink_to_fit true
print.printer_HP_Deskjet_F4500_series.print_to_file false
print.printer_HP_Deskjet_F4500_series.print_unwriteable_margin_bottom 0
print.printer_HP_Deskjet_F4500_series.print_unwriteable_margin_left 0
print.printer_HP_Deskjet_F4500_series.print_unwriteable_margin_right 0
print.printer_HP_Deskjet_F4500_series.print_unwriteable_margin_top 0
privacy.sanitize.migrateFx3Prefs true
privacy.sanitize.timeSpan 0
storage.vacuum.last.index 1
storage.vacuum.last.places.sqlite 1416776213
Important Locked Preferences
Name Value
JavaScript
Incremental GC true
Accessibility
Activated false
Prevent Accessibility 0
Library Versions
Expected minimum version Version in use
NSPR 4.10.7 4.10.7
NSS 3.17.2 Basic ECC 3.17.2 Basic ECC
NSSSMIME 3.17.2 Basic ECC 3.17.2 Basic ECC
NSSSSL 3.17.2 Basic ECC 3.17.2 Basic ECC
NSSUTIL 3.17.2 3.17.2
Experimental Features

Recently, whe i upgrade de medatada in my files, when i select about 40.000 Photos, the program created files with 0 bytes of size and created another with extencion .tmp, whtas is the problem, sorry for my english

Thanks

Just an update... A rep contacted me and we did a screen share. They were convinced that I wasn't full of <insert proper word here>. They promised to get back to me in a few days, and now? A few months later? Nothing.
Still no files. Still no correction... Still no nothing from Adobe.
The person I spoke to was kind, saying he'd make sure I got CC for free for a while...
Still though, no follow up.
Adobe, are you going to correct this or just let your customer suffer at your mistakes?

Restore production from standby database

Hi,
I would like to make a standby database for my production database.
But, I have a basic question to restore my production database from standby database. There is a method to make it ?
If I lost all files from production database, how to restore from my standby datase (which become in this case my new production database) ?
thanks in advance for your help.
gnom92.

* I make a copy datafiles from my new production database (old standby database) on old production (where crash)
* With my old production database, I make a standby database on new production database (old standby)
* I can close the new production database and open the new standby database in read / write mode, and this is my production database.
* After what I recreate my standby database (old standby,newproduction), or can I return in recover standby mode ?
thank you very much for your patience.
gnom92.

Syslogd makes high CPU Load and standby mode doesn´t work.

After updating to Leopard I see high CPU Load caused by syslogd daemon(40%-80%) and my MacBook has problems with standby mode. After stopping the white LED lights and CPU fan speeds up. Is there any chance to fix these problems?

OK.. here's where I'm at with troubleshooting this. As I said before, for ME it occurred simultaneous to a low or out of memory situation. I don't know if syslogd was using my the ram, or if the low ram was a symptom of an issue that syslogd was getting caught up in reporting... but the system log file had tens of THOUSANDS of out of memory errors listed. Almost all were from dashboard.
So... I've done the following. In dashboard I closed ALL open widgets. I disabled spaces (since in another thread someone indicated it used a lot of memory). I ran Leopard Cache Cleaner and used it to perform maintenances, run the os scripts and rebuild caches and so on. Rebooted.
Now its working fine! Since then its been over 24 hrs and I STILL have over 300megs of ram reported free on a 1 gig system. I've used everything else like normal (safari, mail, ichat, itunes, etc..). Where the problem used to happen after a couple of hours after a reboot every time, now it seems normal. No out of mem, and syslogd is running normally (apparently).
I will run a few apps that I havent run in a while and see if those create an issue. If not, later today I will enable spaces and see how that does after a few hours. Finally I'll add in the dashboard widgets one at a time to see if the issue lies there. I'll report back here if I discover anything.

Which c-series modules are compatible with Scan Mode?

OK, so I just wasted 4 hours.
I started a new Project with a need to use a 9220 analogue input card on a cRIO 9030, but immediately became stuck when I was unable to add the module using the right click Add New C-Series Module wizard to the 9030 chassis.
My first (and only) assumption was that this was a new card and I needed the latest Device Drivers. So I installed those.
When that failed I upgraded my LV2014 to LV2014 SP1, and also upgraded the Real-Time and FPGA modules too.
4 hours later, when that failed, I realised that maybe this isn't a card compatible with Scan Mode so began searching ni.com for information. I've searched a whole raft of terms and I just cannot find information on which modules are supported by Scan Mode (which is presumably nearly all of them). I know it exists somewhere because I one referred to it when I had an RS485 module that was only compatible in FPGA mode, about four years ago.
So:
1. Is there an easy way to determine if a C-Series module is compatible with Scan Mode? I still don't know!
2. Can we please have Scan Mode compatibility shown in the Add C-Seris Module Wizard. When attempting to add a module to a cRIO chassis, the wizard can hint to us that a particular module is not compatible. By not showing the 9220 in the drop down list I was led to believe the module was not a known device (and hence I attempted to upgrade my drivers). It would be better if the module was listed but disabled and not selectable, with some informational text to explain why. It's a fair assumption that a module will be compatible, so we don't expect it to not be listed when we attempt to add it. In fact, the possibility that some modules aren't compatible can evade your consciousness temporarily and make you do stupid things (like upgrade your installation!).
3. Can we please have Scan Mode compatability information put on each module's description page. That would have made this whole process much quicker.
Thoric (CLA, CLED, CTD and LabVIEW Champion)

Well, I definitely agree that finding info about RSI module support is not as easy as it should be. Since I know where to look, I will refer you to this document, which I found linked from this page.
That's the best document I know of on the topic.
Cheers!
TJ G

Calendar entries in Active Standby mode

A double question, but both are closely related.
In Active Standby mode it shows upcoming calendar entries for today and future ones.
Q1) Can someone clarfify does it only show 1 entry for future events, since I have placed 2 entries for tomorrow and 1 for the day after. But only 1 (the first) appears in Active Standby.
Q2) I THINK IS A BUG!! It does not show Anniversary as future events in Active Standby. It only appears when it is on the day (bit late if you need to buy a present!).
Any comments
Andrew
Device: N70
Version: V 2.0536.0.2 12-09-05 RM-84

I think this is by design. Not quite sure what the basis is of what is included and what is not. Items from the current day seem to show up in greater numbers than in future days.
All About Symbian - News, reviews and software for S60 phones.

Issue With Report Builder After Installing SP3 for SQL 2008 R2

Hello. We are experiencing an issue with Report Builder 3.0 since installing SP3 for SQL 2008 R2 over the weekend. You can no longer launch Report Builder from the Reporting Services URL (http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
Application url   :
http://dicomweb/ReportServer/ReportBuilder/RptBuilder_3/MSReportBuilder.exe.manifest
      Server  : Microsoft-HTTPAPI/2.0
      X-AspNet-Version: 2.0.50727
IDENTITIES
Deployment Identity  : ReportBuilder_3_0_0_0.application, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86
Application Identity  : MSReportBuilder.exe, Version=10.50.6000.34, Culture=neutral, PublicKeyToken=c3bce3770c238a49, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Online only application.
* Trust url parameter is set.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application resulted in exception. Following failure messages were detected:
  + File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [10/15/2014 9:35:56 AM] : Activation of
http://dicomweb/ReportServer/ReportBuilder/ReportBuilder_3_0_0_0.application has started.
* [10/15/2014 9:36:29 AM] : Processing of deployment manifest has successfully completed.
* [10/15/2014 9:36:29 AM] : Installation of the application has started.
* [10/15/2014 9:36:31 AM] : Processing of application manifest has successfully completed.
* [10/15/2014 9:36:35 AM] : Found compatible runtime version 2.0.50727.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=msil using Sentinel.v3.5Client, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Detecting dependent assembly System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=msil using System.Data.Entity, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089,
processorArchitecture=msil.
* [10/15/2014 9:36:35 AM] : Request of trust and detection of platform is complete.
ERROR DETAILS
Following errors were detected during this operation.
* [10/15/2014 9:36:43 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
  - File, Microsoft.ReportingServices.ComponentLibrary.Controls.dll, has a different computed hash than specified in manifest.
  - Source: System.Deployment
  - Stack trace:
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
   at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
   at System.Deployment.Application.ComponentVerifier.VerifyComponents()
   at System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification
notification, DownloadOptions options)
   at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
   at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
   at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
   at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
No transaction information is available.

Hi DMcGarveyt,
This is an known issue in SSRS 2008 R2 SP3. For this issue, Microsoft has published an article addressing this issue. It is not planning to release a fix for this defect. But there's workarounds for this issue. Please refer to the link below:
Report Builder of SQL Server 2008 R2 Service Pack 3 does not launch.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

In the installation process lion will not install as message reads MAC HD 904 gb available this disk is used for time machine backups .What is the next step

After downloading ,completing the lic agreement phase, the next step is where to install and automatically' MAC HD with 904 gb available this disk is used for time machine backups' is shown and installation is blocked .
Any body got any idea what to do next ?

Time machine needs its own partition to operate. So you are not going install a OSx Lion on that volume.
If there is enough room you may be able to partition the drive on the fly with DiskUtility
Are you saying you clean installed Lion and you are trying to move your user Data over with TM via the migration Assistant? Please explain.

Restore Log with Standby Mode on VHDX disk problem - hotfix for SQL 2014 needed

Similar Messages

Maybe you are looking for