Restrict the system , not to delivery in the weekend

We would like the system to warn not to ship over a weekend. Is there a flag in SAP that would not allow a delivery over the weekend?

Hi,
you can define this in the factory calendar for customers in which you define the holidays for the plant and as well as you define the receving hours for the goods in the factory by defining the receiving hours for the customer.
Spro->Sales & Distribution>Master data>Business partners>Customers>Shipping->Define goods receiving hrs.
Regards,.
velu

Similar Messages

  • Will system not AUTO re-draw the field's lengthsas per specified# of CHARs?

    Hello
    I am developing an interactive form with webdynpro ABAP.
    I want to restrict the user to enter/input a specified number of characters in the input field, say, its NAME field, then i want allow user to enter 35 CHARs (in SAP the NAME field length is 35 CHARs), fo this am specifying the 35 as Max. Characters under Limited length under Filed tab of Objest on the form itself, its working fire.
    But, i want system should design the WIDTH of this NAME input field equals to 35 CHARs only, even i manually draw this NAME field until right end point of form (its nearly 225 CHARs length), am looking that the system should auto re-draw the input fields as per the specified # of CHARs in Max chracters in the form
    Do i need to do any settings to achive this? or auto re-draw is not possible ?
    Thank you

    Hi,
    Its not possible to that system draws the width depending on the max chars at design time. And its because of the reason that characters in that field will be dynamic and system won't be knowing the width of every Character. For example 'I' and 'A' has different width. However the system can set the maximum number of characters and also the width can be expended as per the size of characters at run time. For this functionality you can set width in layout as "Expand to Fit".
    In case you need to fix the width at design time only, then check by putting a value containing 35 chars in the default value field and fix the width in layout.
    Regards,
    Vaibhav

  • My daughtrts ipad 2 only recognises headphones. and the internal speaker will not work. we have reset the system  three times, cleaned out the headphone jack, and  chrckrd the side switch above the volume. alos we ensured it was not in do not disturb mode

    On our ipad the speaker has quit working. Sound is only heard when you have head phones plugged in. We have reset the system three times cleaned out the headphone jack. Changed languages and rest but nothing works. This ipad is important to our daughter it is her tool to communicate with us and now it is not working please help

    You've done well with troubleshooting so far. Next step would be to back up and then restore from iTunes. Good luck!

  • How come the sight was down so long? and why does the system not send emails anymore with responses?

    how come the sight was down so long? and why does the system not send emails anymore with responses?

    The system is back up and fully functional. How long has it been since you stopped receiving notifications? Can you share your form with us so we can have a look into what might be going wrong?
    Andrew

  • How to conf  in Hyperion, so the system couldn't login with the same user

    Hai.....
    how to configure in Hyperion, so the system couldn't login with the same user id in different machine ? (could you please provide me with detail step by step ? )
    rgds
    uka fp

    fane_j wrote:
    Sally R. wrote:
    Someone gave me a suggestion to go to the terminal and type in the following:
    ls /Users/Shared/.*.so
    This was published on MacWorld's site, and it's not a very good tip. Try this instead
    ls -la /Users/Shared/*.so
    Turns out I was wrong about that. Somebody else suggested something even more complicated and got this reply:
    By bastion
    Fri Feb 24 08:49:05 PST 2012
    PeterSParker said
    Your terminal statement has an extra "." in it that prevents it from working.
    Also, you should add the options -alR to show what is happening, and to search subdirectories.
    The revised command looks like this:
    ls -alR /Users/Shared/*.so
    The above is completely wrong. The command as shown in the article is appropriate.
    The "." is not extra and doesn't prevent the command from working. It's specifying that you're listing files that start with a period and end with ".so" with anything in between being matched.
    Because you're explicitly searching for things that start with "." you don't need the -a flag.
    Because you only care about simple existence and not any metadata you don't need -l.
    Because the files of interest are installed in /Users/Shared directly, and not subfolders thereof, you don't need -R.

  • 10g - write back - The system is unable to read the Write Back Template

    hi,experts,
    I enabled write back on a report.
    the button (write back) is enabled (not grey)
    but when I click the button, there is a message
    The system is unable to read the Write Back Template 'UPDATETESTWRITEBACK'. Please contact your system administrator.
    I put UPDATETESTWRITEBACK.XML in C:\OracleBI\web\msgdb\customMessages
    the syntax in the xml is correct.
    what is the result? any log to check?

    Its not mandatory to have the same template name as your xml file name.
    But the <WebMessage name= "UPDATETESTWRITEBACK"> should be same what the templetae you are using in the webcat.
    Please find sampel xml which can have any xyz name in the folder "OracleBIData\web\msgdb\customMessages'
    <?xml version="1.0" encoding="utf-8" ?>
    <WebMessageTables xmlns:sawm="com.siebel.analytics.web.messageSystem">
    <WebMessageTable lang="en-us" system="WriteBackTemplates" table="Templates">
    <WebMessage name= "ResourceAllocation">
    <XML>
    <writeBack connectionPool="--your connection pool name">
    <insert> Insert statement </insert>
    </writeBack>
    </XML>
    </WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    Cheers,
    Rajeev A

  • The system cannot download information from the SQLSERVER server.

    Hi All,
    After BPC 7.0 SP6 for MS install we get the following when trying to access the "Manage Application Sets" or any other admin console task, when we try to execute the connection wizard:
    The system cannot download information from the SQLSERVER server.
    There may be a network or security issue.
    Error Message:Error code: 500
    any ideas?
    Br
    Steven

    Steven,
    Could you also make sure that the problem is not on the client side.
    Is this a fresh installtion on the client machine? Or was there already an previous version of BPC on this machine?
    If this is not a fresh install, you can try to uninstall the software and then deleting all the files in the folder
    "program files\BPC". I've seen that sometimes not all the files are automatically deleted.
    Then installing the Bpc client agian...
    Kind regards,
    Sam

  • Some PDF files, cannot be opened by Preview version 6.0.1. The system ask me to upgrade the version and direct me to Adobe site

    Some PDF files, cannot be opened by Preview version 6.0.1. The system ask me to upgrade the version and direct me to Adobe site to install Adobe Reader

    Below a link to a file which is an application to canadian visist visa, you can find the link also in the folowing site:
    http://www.cic.gc.ca/english/information/applications/visa.asp.
    I ttried to open the PDF file form Web, and down loaded from web to my Mac, but in both attempts did not work, and I 've beem asked to upgrade to a later Adobe version from the site or from the PDF file.
    Application for Temporary Resident Visa [IMM 5257] (PDF, 338 KB)

  • RFC_ERROR_LOGON_FAILURE: The system is unable to interpret the SSO ticket

    Hi folks,
    i've here an issue that i could not solve, i've implemented SSO between SAP EP and SAP ERP 2005 several times but this time i've the error message
    " The system is unable to interpret the SSO ticket received"
    I've already imported portal certificate, put parameters in instance profile and restart ERP but it still gave the error, i found the same issue from others sdn users but none of then have the solution for me.
    Could anyone help me here?
    This is a urgent matter.
    thanks in advance,
    Pedro Rodrigues

    Hi Pedro,
    what result do you get in a connection test in the portal ?
    To do that :
    open the System definition (under System Administrator/System Configuration);
    Open the ERP 2005 system entry> "Connection Test"
    Select "Connection test for Connector".
    Also make sure that the domain of both systems (portal and ERP) are the same e.g. portal.company.com and erp.company.com . IP addresses are not working in SSO....
    Also helpful is the OSS 701205 which has a attached PAR file for testing the SSO.
    Regards,
    Kai

  • When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    Hi SheilaStuhr,
    The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
    Basic troubleshooting
    See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
    Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
    Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
    If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
    Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
    Install the latest version of iOS.
    Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
    If you still see the issue, restore the iPhone.
    If you're still experiencing issues, try the steps below.
    Wi-Fi troubleshooting
    If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
    Turn Personal Hotspot off.
    Turn on Wi-Fi: Tap Settings > Wi-Fi.
    Turn on Personal Hotspot.
    If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
    If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
    See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
    If the other device still can't connect, turn Wi-Fi off and on for the device.
    Make sure that your device can see other Wi-Fi networks.
    Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/en-us/HT203302
    All my best,
    Allen

  • How can i reorder the columns in the do not display section of the interactive report.

    Hi,
    My interactive report contains 185 columns, and the user requieres to build his customized reports with some columns, but the he gets lost between this amount of columns, this would be easier if the columns in the do not display section of the interactive report would be sorted automaticaly, Is this possible?
    Thanks a lot,

    Hi Eva,
    One solution would be to order the column names alphabetically. You can create a JavaScript dynamic action to handle the sorting.
    The shuttle of the IR attribute "Select Columns" have the ID's "apexir_SHUTTLE_LEFT" or the Hidden colums and "apexir_SHUTTLE_RIGHT" for the displayed columns.
    The function you'd need to create would look like:
    var options = $('select#apexir_SHUTTLE_LEFT option');
    var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
    arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
    options.each(function(i, o) {
      o.value = arr[i].v;
      $(o).text(arr[i].t);
    var options = $('select#apexir_SHUTTLE_RIGHT option');
    var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
    arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
    options.each(function(i, o) {
      o.value = arr[i].v;
      $(o).text(arr[i].t);
    You'd need to find the propper timing for the dynamic action to run, I guess click of the button "Select Columns" would do the trick.
    Regards,
    Vincent
    http://vincentdeelen.blogspot.com

  • Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up.

    Holding down the option key when booting my iMac lo longer shows me my bootable external drives, the system just boots up to the main system. Also, holding down command, option,P,R no longer zaps the p-ram. the system just boots up normally. Why do these key fonctions no longer work?

    It could be your timing if on a bluetooth keyboard.  I find it best to hit the keys as soon as i hear the chime, release and hit them again but this time holding them before the chime ends....like a fake pump in football.
    But....you can always open up system preferences, startup disk, and select your bootable clone for booting.  If it doesn't show up there, the Mac doesn't think it's bootable.

  • I tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

    i tried to install a new os x mountain lion, but the system asked me to provide the apple id and password that was used to buy the os from the apple store online. which i don't have. how do i go ahead to install my new os x on the mC

    If you don't have the Apple ID and password, how did you get Mountain Liomn in the first place? Without the Apple ID and password, you'll need to buy it to download it.
    Mountain Lion

  • Where in the System Preferences do I increase the computer screen text size

    Where in the System Preferences do I increase the computer screen text size

    What you need to change is Screen Resolution.
    You can change the screen resolution in System Preferences / Displays. On that pane you will see numbers like 1440 x 900. The larger the numbers the smaller the text on the screen. (The current setting is shown in grey.) Just experiment with other resolutions til you find one that suits you. You want to move down in the options to increase the size of the displayed text.
    When you select a new resolution, you have to confirm that it's what you want, else the computer will revert to the previous resolution.

  • Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?

    Hi. I have a OS X Yosemite Version 10.10.1 Mac Book Air, Processor 1.86 GHz Intel Core 2 Duo.
    Has anyone else had a problem with the audio not keeping up with the video when switching to full screen on YouTube?
    The video starts out fine, but if I click on the expand icon in the lower right corner of the screen the audio won't keep up.
    Refreshing the page don't help at all. In fact, nothing seems to help once it starts.
    I did not have this problem at all using Mavericks. The problem started after installing Yosemite.
    Any way to fix it?

    only $99, i thought it was closer to $175.

Maybe you are looking for

  • Media source webupd

    I tried to install the web update of media source, version 3.30.2 for my zen micro, but it didn't works. I uninstalled all components (micro, media source) from my system and installed it again, but the web update won't work. Before and after the new

  • Dual Boot Lion-Snow?

    I'm tired of Lion's unsupprted by just about everything, It's seems to run fine 90% of the time but not with a good protion of my apps. Problem is a have gotten a few new ones that are Lion only... soooo anyone tried dual boot with Lion and Snow? wil

  • Why can't I  turn location services back on.

    Why can't I  turn location services back on?

  • Advice Needed: Activating Second iPhone

    I'm about to activate a second iPhone on a new FamilyTalk account. The second iPhone will be used with a different computer/iTunes-username than mine, which the first iPhone was activated with. If I activate the second iPhone using my computer, and m

  • Manual tabular form - popup

    I have a couple of problems with the manual tabular form I have created and would appreciate some help, First the htmldb_item.popup_from_query is not populating the field when I select the item: The query looks something like this: Select x.data1, x.