Restrict work order confirmation without activity price in KP26.

HI Guys,
we are maintaining the activity price in KP26 for mandays activity and confirming it in IW41. Now if activity price is not maintained in KP26, and confirming the mandays in IW41, system should through an error message. please let me know how can i do this.
Anil Kumar. V

Hi
you can check the SPRO in Define Control Parameters for Completion Confirmations where you can mark the Actual cost , and Termination for incorrect act cost. where in it will through an error which confirming the same.
If the above conditions don't met your requirement you can check the same using user exit
Regards
Thyagarajan

Similar Messages

  • Work Order Confirmation -Zero Hours is allowed !

    Dear Experts,
    Can any one update, why work order confirmation is allowing Zero hours in IW41 transaction. Is there any significance for booking zero confirmation hours as SAP standard is allowing.
    We need to restrict the same, is there any way to restrict without ABAP Team help.
    Regards,
    Sahu

    Reasons for allowing '0' hours can be like if some does not want to account for a particular job. Possible some technical constraints were there while developing. As far as How to restrict is concerned, I do not see options other than using user-exit CONFPM05. This is because even if you set this field mandatory (Actual Work AFRUD-ISMNW_2) in Tcode OIZN, it does not prevent confirmation with Zero value. You can also try by setting this fields as Req. in this SPRO tcode.
    KJogeswaraRao

  • Posting EDI Order confirmation without message control

    Hi,
    I would like to post a EDI sales order confirmation without message control through z program.
    Please let me know how to do this???
    thanks in advance
    Mukund

    Hi
    This link may be useful
    Re: Re-open EDI - ORDCHG for outbound sales order

  • Mass reversal of work order confirmations

    Hi all,
    Can we do a mass reversal of work order confirmations which we do through IW41 transaction,instead of reversing the confirmations one by one, if so please explain how.
    Thanks & Regards,
    Jegashree

    Dear,
    There is no mass confirmation cancellation Txn available in standard SAP.
    Use
    BAPI_ALM_CONF_CANCEL     Cancel confirmation for maintenance/service order
    Hope it will help you.
    Regards,
    R.Brahmankar

  • Get Lastest date of the Work Order confirmation

    Hi experts,
    I want to write a report to get the lastest date of Work Order confirmation.Pls give me some logic solution. How to do?
    I know the work order can be cofirmed partly,So there are maybe several date for work order confirmation,I only want get the latest one.
    Edited by: Bean Dou on Jan 5, 2009 8:24 AM

    SORT BY DATE FIELD
    DATA:CNT TYPE SY-TABIX VALUE 0.
    SORT ITAB BY ERDAT. --->SUPPOSE THIS IS THE DATE FIELD
    LOOP AT ITAB.
    CNT = CNT + 1.
    ENDLOOP.
    READ ITAB  INDEX CNT.
    ****NOW YOU CAN GET THE LATEST DATE ROW******
    ITAB-ERDAT.

  • Activity prices in KP26 used for actual and plan in version 0

    We plan activity prices via KP26 in version 0. We then plan activity consumption via KP06, and run the plan reconciliation via KPSI.
    During the year, we need to update the activity prices used in actual activity allocation. This price also comes from version 0.
    When we change the activity price, the planned amounts change also. We are looking for a way to maintain a separate price for actual activity allocation.

    Ajay,
    Your answer definitely sent me down the right path...thank you!
    For other's benefit, these are the steps I took to make this work:
    1) set the "Purely Iter. Price" indicator in plan version 0
    2) import planning layout 1-N01 from client 000 (OBKF)
    3) add planning area "Cctr: Manual actual prices" to planning layout SAPALL (KP34)
    4) add planning layout 1-N01 to planner profile SAPALL (KP34)
    5) create and run custom program from note 551309 to add cost element field to the input screen in KBK6 (SE38)
    6) transport planning layout for planning area "Cctr: Manual actual prices" (OKEX)
    Now we can plan a price in KP26, and maintain a different price in KBK6 which is used in the actual activity allocation.
    Thanks again,
    Linda

  • Work order confirmation after TECO

    Hi Friends,
    I have been facing a trickey situation where even Work order got TECO and i am triying to confirm the Operation (IW41) its allowing me to enter actual hours.however in work order those hours getting updated as actual Hrs aganist operation.
    How its possible,in fact i should get error message.
    can you please suggest.
    Regards,
    Srinika

    It is standard behaviour. There are ways to restrict. See these 2 posts
    User-Exit way
    Stop Confirming TECOed PM Order: User-Exit Way
    Status Profile way
    PM Order - System Status and User Status Update
    KJogeswaraRao

  • Order Confirmation without component fully issued

    Hi
    We found system allowing Process order confirmation even component Materials are not fully issued to respective reservation by MIGO_GI. We found system is allowing confirmation and even TECO. Even Production material get produce without component qunaity reduse from system.
    We want to stop confirmation and Techo if all component materials are not issued.
    How to achive this.
    Note, in OPK4 we have activated Error handling for goods movement but there is no tick on "Termination for incorrect goods movement"
    Thanks
    Sunil

    Dear Sunil,
    For this requirement,check with this BADI - WORKORDER_CONFIRM using the method AT_SAVE by cross checking the
    requirement quantity and quantity withdrawan for each component and then allow the confirmation based on the complete or
    partial GI of the components.
    Regards
    Mangalraj.S

  • Order Confirmation Without Doing Goods Issue & No Goods Receipt W/o Confirm

    Hi,
         I am facing a problem at client site & i need a quick response from you people.
    If i am not doing GOODS ISSUE to a Production Order the system is allowing me to do Confirmation for that Production order & also the system is allowing me to do GOODS RECEIPT for that Order before doing complete Confirmation.
    My client wants that Without doing Goods Issue it should not allow order confirmation & also No Goods receipt without doing Final confirmation. Please help me regarding this configuration, How to do it. If it is possible then please help me& tell how to do it.
    I am in final stage of my project.Please i want a quick response.
    regards
    Jimmy

    Hi Ashish,
    you need to create new thread anyway
    for process industry you need to use CONFPI 02  you can put this in SMOD and go to display in that you can see component when you click that you can find functional module  : EXIT_SAPLCORF_402 click in that you can see include in which you need to modify
    take help of ABAP and do some modify to this module
    Thanks
    Bala

  • Updating PO confirmation and ASN through Work Order Confirmation

    Hi,
    We implemented PO collaboration and Supplier is doing PO Delivery confirmation and ASN.Now we are implementing Work Order Collaboration and system  created Work Order with reference to Purchase order.
    I want to know whether PO confirmation  and ASN date gets copied from Work order dates(after doing confrimation for phase Transport).
    I want to know what setting we need to do as presently it is not getting copied to Work order. And I want to know how it updates ECC confirmation tab for Purchase Order.
    Please do the needful
    Regards
    Raghavendra Pai

    Hi Raghavendra
    The above validation check will prevent supplier confirming purchase order request lines in PO details screen, so only supplier can confirm through WO confirmations, i.e by accepting the work order request lines in delivery overview, adapt the work order
    This will make the work status as CIAG from CINE, in negotiation to in agreement
    Then you can publish the work order, this will copy the confirmed data from the work order as identical request data and confirmation data to the purchase order. this data will be picked by ROC_Out and updates the po data in backend
    Please check whether ROC_out is available in customizing
    SPRO-SNC-BASIC SETTINGS-PROCESSING INBOUND & OUTBOUND-PROCESS TYPES OUTBOUND MESSAGES
    ASSIGN OUTBOUND MESSAGES TO DEFAULT PROCESS TYPES
    REPLORDC_O ASSIGNED TO ICH SUPPLIER COLLABORATION
    Still if does not trigger, kindlly check the log slg1
    it could be problem with ODM's ,POS etc
    Best Regards
    vinod

  • Process order confirmation without 101mvt type

    our client is  a process industry.client need during process order confirmation Background 101 not happen.
    Step : 1 Process order create
    Step : 2 Goods issue The material -261
    Step:  3 Process order confirmation   (No 101)
    Step:  4 Goods Receive (MIGO) 101 happen 
    Following Steps Process only,
    cork-only activity confirmation only,after Activity  confirm GR will Happen , how to configure in the system,any user exit or sap note there in the sense tell me?
    Thanks For Advance

    Hi Thiyaharaajan,
    For Goods issue i believe you are using MB1A/MIGO. You also use backflush to automatically issue the material during confirmation.. For this maintain Backflush - 1 in material master MRP 2 view.
    Also during confirmation for doing Auto GR (101 movement type) you need to assign the control key ticked with Auto Goods Receipt for Last operation/phase of Master Recipe.
    Thanks & Regards,
    Ramagiri

  • How to send IDoc(Sales Order Confirmation) without Message control

    Hi,
    I need to send Sales Order confirmation,Delivery and Invoice through ALE (IDoc's). I am asked not to use MESSAGE CONTROL or CUSTOM IDoc to send confimation.
    I dont need to send a instant confirmation but i can do it at a specified time intervals.
    Do we have any other possiblity other than the both?
    Can you please give the steps to do, if possible?
    Thank you in advance,
    Gangolu.

    Hi
    This link may be useful
    Re: Re-open EDI - ORDCHG for outbound sales order

  • Work order settled without functional area

    Hello All,
    We are getting an issue here, business is trying to settle a workorder by posting it through KO8G.
    When the posting is done we cannot see the Functional area on the Debit Line (40), and the credit line has the work order, profit center and functional area. As the debit line does not have functional area, the data does not match in BI.
    Could anyone please elaborate how can we get the FA on both the lines.
    Thanks in Advance,
    Tushar Nerlekar

    When you issue inventory to service order, the journal entry is
    Dr Consumption + Production Order (Functional area derived from order type)
    Cr Inventory (B/S account doesn't need CO object assignment)
    When the order settles, the accounting entry is:
    Dr Consumption + Cost Center (Functional area derived from cost center master data)
    Cr Consumption + Production Order (Functional area derived from order type)
    In Iw33, check in Go To -> Settlement Rule at header level what is the settlement receiver?

  • Activity Price thru KP26 & KP06

    I want a clarification regarding activity price calculation:
    - I know that we can manually enter the activity quantity and variable/fixed rates in kP26.  If that is the case, what is the purpose of quantity that is entered in KP26 ?
    - Other way, we can plan the cost element in the cost centre and later on maintain the quantity in KP26 and do the KSPI (plan run) and the system will calculate the prices.  In this case, I hope, system will be calculating the fixed price only.  What about the variable price then ?

    hi nikitha..
       I am really confused to see the various comments on this issue. Basic requirement is to calculate fixed & variablr price after KSPI run
      If you follow the steps below your purpose will serve:
    KP06      1-101     Cost Centre Planning - element planning (Fixed value & Variable Value)
            1-102     Activity Distribution to findout Fixed/Variable Price
              if both are required paln Variable quanty
              otherwise Fixed qty
    KP26      1-201     Activity Planning (Activity qty)
    You have to use both the layout in KP06 & remember the total activity qty you have planned in KP26 that should match you activity distribution in KP06 (1-102 layout)
    thanks
    kkumar

  • Activity Price trxn KP26

    Regarding Activty Price trxn KP26 Is there a way to set fixed price as "Zero" I am aware the one cent will be accepted.

    Hi
    KP26 has 2 columns - Tot Price & Fix Price
    If you want zero price in Fix Column - DO NOT enter any thing in there
    br, Ajay M

Maybe you are looking for

  • IPad Mini 3 as iPhone 4 replacement?

    Anyone switched from iPhone 4x/5x to iPad Mini as a primary on-the-go device? 1. Please share your experience on: what scenarios/apps proved better at Mini / in which contexts? which are tolerable at Mini, though better performed at iPhone? which are

  • Music files not showing up...but still on ipod

    So today i plugged in my ipod and itunes opened up and I immediately noticed that the music files were not able to be viewed, but the ipod still read that it had x number of files and x number of gb's used. Is it possible to recover my music files. I

  • Verifying a Digital Signature using message digest

    Hi, i am new to java. I have a Digitally signed document, i wanna verify this signed document against the original one. i got the idea from this link: http://help.sap.com/saphelp_45b/helpdata/en/8d/517619da7d11d1a5ab0000e835363f/content.htm i signed

  • Worklist table ponits to the first row after copy row

    Hi experts, We have installed ESS BP 1.41 into EP version 7.02. Now we found one issue in the ESS Working Time application screen. The screen has an option of copying rows from Worklist Table on top to the bottom table having Weekly/Daily view. The p

  • Apple tv syncing but unable to stream

    Hi. I have just tried to stream to my ATV. The ATV gives me the code but the ATV page (ie clicking on ATV in devices)in itunes isn't giving me the boxes to write the code. Any advice is appreciated. I'm a newbie so it could be something very straight