Restricting items to User/Responsibilities

We want to restrict certain items to certain users 0nly, or to be more
liberal( since items cant be restricted to users) we would like to
restrict the access of some items to only
selected responsibilities in Inventory and Purchasing transactions
only.
Is it possible first of all to achieve ? And if it is possible then
how do we achieve it? Any standard funbctionlaity or any workaround?
Something like restrictions like Organization access

I note this is a little late to reply to this thread. But was curious - Is you need to
restrict Item Creation or Items being available for Transaction?
The former can be achieved by restricting the access of the Master Items form to
only the few concerned. Even if you want make Org Item form read-only, you cd do that. However, for Transactions there is no way to restrict as of now. And neither can I think of a workaround.

Similar Messages

How restrict list of items to users

Hellow oracle Gurus,
requirement is: clients handles domestic and international items, one user work on domestic items and one user works on international orders.
They want to restrict certain items to users.
Is there any steps to acheive this?

Hi,
You can do one of the following things:
Approach-1:
Setup security rules.
Brief setup overview
1. Create a valueset as "Non-Hierarchical Security" and validation type "Independent".
2. Assign the valueset to the respective segment of the "System Items" Key flexfield.
3. Setup two security rules separately for Domestic and International items on the created valuset at - Setup -> Flexfields -> Key -> Security -> Define in the Inventory superuser or similar responsibility.
4. Add the domestic and international items to the respective security rule.
5. Assign respective security rules to the domestic and international responsibilities.
Approach-2:
1. Categorize items as domestic and international.
2. Create two separate responsibilities.
3. Setup forms personalization to restrict users based on category (this is to be applied at responsibility level).
Thanks,
PS.

Search Centre display items from list that are restricted to that user

I created a search centre page for users to be able to search on our reports. A lot of these reports have permissions on them and should not be available for viewing. I tested with a user to search for a restricted item for them in the search centre. The
items appeared, however it was only upon executing the item, it stated that it had not been shared with them.
Is there a way to prevent the items appearing in search to being with?

So after doing a little more of my own research I found that I will have to implement some form of security trimming using a custom solution.
http://msdn.microsoft.com/en-us/library/office/ee819923(v=office.15).aspx
A little out of my depth writing in C# for SharePoint, so are any other ways of implementing a basic security trimmer?

Restrict Item Category Item Creation using Reference Only

Hi All
Here is the scenario, I want "Restrict Item Category Item Creation using Reference Only"
a.Retrieve document number VBELN from sales order header table VBAK for the current order. Check if the sales order is of type ZAB referencing field AUART in table VBAK.
note : Any changes to existing sales order "ZAB" will be performed in thesame sales order type(ZAB) in VA02 transaction.
b.If step a is passed, check internal table structure for sales order item level as XVBAP-PSTYV for possible item category values of 'ZDEF' for the entered line item and document number (XVBAP-VBELN).
c.If the cancel/change item category values are found on the line item, check internal table structure for document flow (XVBFA) if the cancel/change item category was created as reference:
i.Check if entry exists in XVBFA for the preceding document number field VBELV with value equal to value in the subsequent document number field VBELN. This value must equal the current sales document number VBELN in table VBAK.
ii.The above check must be done in conjunction with the following check:
1.Check if entry exists in XVBFA for the preceding document type field VBTYP_V with value C equals subsequent document type field VBTYP_N with value of C.
d.Once the above checks are passed, collect the item number from internal table XVBAP (Field: POSNR) for the change/cancel item category line item added to the sales order.
e.Check if the item number retrieved in the previous step exists in table VBAP (Field: POSNR) with an item category that is not part of the list of cancel/change item category defined in step b.
f. Check if the item number collected in the previous step exists in the subsequent item number (Field : POSNN) in internal table XVBFA for the row that passed checks in steps b and c.
g.If item number exists, check if this subsequent item number field equals the preceding item number field value (Field: POSNV) in table XVBFA.
h.If step g fails, generate an error message stating that the user needs to the create the cancel/change item category line item with reference to the original line item and do not allow the user to proceed with the transaction.
i.If step g succeeds, allow the user to proceed with the transaction.
can any one send me the logic for this scenario.
Rgds
Chinna

Hi Chinna,
Please use BADI "BADI_SD_SALES_ITEM" to achieve your requirement..
Let me know if you have further questions..
BR
Rakesh

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

I upgraded to mountain lion a week ago and now on startup of my macbook pro, microsoft excel and word start up automatically and then crash? very strange can anyone please help? I have checked the login items under users and groups and there is nothing.

Are you using the Office for Mac 2011 version, as you need to do? The Office for Mac 2004 is Not at all compatible with Mountain Lion, and the 2008 version has been noted to have some problems running with ML.
Hope this helps

Reset order item's user status

Hi,
I would like to reset an order item's user status to original after user change the user status. What function module can I use? CRM_ORDER_MAINTAIN will give me recursive short dump. Tried CRM_STATUS_MAINTAIN_OW and CRM_ORDER_CHANGE_STATUS.
Thks.

Hello,
Could you please explain a little bit more what is the requirement.
Why do you allow a user to change the user status if you want to reset it afterwards?
Regards,
Frédéric

How would you limit the number of Web App items a user can enter.

I am creating a web app where people can list objects/items. I want to offer plans that will enable users to enter up to a predefined number of entries and no more than what they paid to enter. They can then come back as often as they wish during their subscription period to update, create, and/or delete entries ( but again, never more than what thier subscription entitles them ).
Fore sake of illustration.
User Plan 1 entitles user to enter 1 web app item,
while
User Plan 2 entitle user to enter 3 web app items, and
User Plan 3 entitles user to enter 5 web app items.
These are annual plans.
Any ideas?

Hi,
As per your query you can not define to any user for schedule selected background jobs. I hope you are clear for this.
Anil

Report to get Asset Line item details & user id details

HI All,
Is there any report to get Asset No, Assets line item details & user Id details.
Thanks in advance.
Ava

Hi,
which user ID? User created? User last changed?
You can enhance any standard report with individual fields, see WIKI entry [Include additional fields in Standard Fixed Asset ALV reports|https://wiki.sdn.sap.com/wiki/display/ERPFI/IncludeownfieldsinFI-AAstandardALV] and/or SAP note 335065.
User who created the asset is field ANLAV-ERNAM.
Regards,
Markus

Restricting only single user to update a webpage at a time?

Hi,
I have a requirement where in I need to restrict only single user at a time to access a webpage(generated by servlet).
One way I could think of is using servlet filters but I have WAS 4.0 which doesnt support it.
Is there any other way that I can implement this??

You can just use a Servlet instead of Filter.

Disable Items in User Interface - Custom

I have been looking through the Control Identifier/Policy ID number from the spreadsheets below.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=6627
I have been unable to find the following item in order to remove it using group policy. Can someone tell me definitively if it does not exist and if it does what is the correct ID in order to disable it through User Configuration->Administrative
Templates->Microsoft Outlook 2010->Disable Items in User Interface->Custom.
Under Tasks, New Task, Assign Task there is a check box next to "Send me a status report when this task is complete" that I want to remove.
Thanks,
-Ethan

Hi Ethan,
>>Under Tasks, New Task, Assign Task there is a check box next to "Send me a status report when this task is complete" that I want to remove.
Sorry, based on my knowledge and test, there is no corresponding policy ID to disable this checkbox.
In addition, I searched around and found that this setting should correspond to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\options\Tasks
AddToUpdList
Regarding this point, the following article can be referred to for more information.
Task Options not in Outlook Object Model - Registry Workaround
http://www.outlookcode.com/threads.aspx?forumid=4&messageid=32320
Please Note: Since the website above is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Developer 6i,Item type "User Area" and "Bean Area"

kindly I want to know how to use item type "user area" and "Bean Area",i never used them and i didnt find good help about them,and i appreciate any help with examples.

Hello,
I have forgotten what is the user area because it has disapear with the 9i version.
The bean area allows you to put some java bean component inside your Forms module.
Check out the demos available on the Forms OTN page
http://www.oracle.com/technology/sample_code/products/forms/index.html
Francois

Table access restriction to certain users

Hi,
How to restrict the particular user in accessing the database tables ?
For example: A user should not be given the the rights to access the table AUFK.
Thanks in advance.
Regards,
Harsha

Hi,
If you are talking about access of table through SM30, it can be done by authorization object concept. You can assign the appropriate authrization object while creating the table maintenance. Basis will assign the roles to the user. If it is SE16/SE16N then you need to create parameter transactions for each table user is allowed to view.
Other generic option is, You can develop a report program and display the tables allowed for the user. On clicking the table name, you can take to SE16 screen. (You may need to create a transaction variant for se16/se16n for disabling the table name input field to control the user not to access other tables). Tables allowed for the user can be maintained in a Ztable.
Thanks,
Vinod.

How can we restrict the other user to add their user id's to the user group created in SQ03?

Hello All,
How can we restrict the other user to add their user id's to the user group created in SQ03?
When we enter the user group name and click on "Assign users and Infosets" button in the attached pic "User Group" .
I was able to enter my user id in other user groups. How to Grey out the other rows in the attached pic "User Group 1".

How strange I answered (or at least helped) this very same question earlier today. Here the link to my previous answer then:
http://scn.sap.com/thread/3536135

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

How do I stop iTunes (10.7) from automatically launching upon restart? "Open at Login" is NOT checked in the dock and I have removed the app from Login Items under Users/Groups. I am using a MacBook version 10.7.5. Thank you!

Thanks for the response gakker, but I've double-checked the camera / iPhoto / Image Capture scenario, and I'm 100% positive it's got nothing to do with that.
Plugging in my iPhone has no effect on anything related to this.
The other thing I should have mentioned is that when iTunes on my Mac is NOT running, then nothing happens on my iPhone screen when I plug it in to my Mac. I only get the "Sync in progress" message when iTunes IS running.
It's interesting though that you say you also get this "Sync in progress" message, albeit only for a second or two though.
Can I just double-check something with you however... When you say:
+"at no time was my iTunes playback interrupted"+
do you mean the iTunes on your Mac? Because the problem I have is that the iPod-playback on my iPhone is interrupted.
So can you clarify that for me, please? If you have music playing on your iPhone, and you then plug your iPhone into your Mac when iTunes is running on your Mac, does the music playback on the iPhone get interrupted?

How to restrict a normal user

Please explain how to restrict a normal user from getting connected as sys user in sqlplus.Even though I have revoked the sysdba and sysoper priveleges, I am able to get connected as sysdba in sqlplus. Is there any way to restrict the normal user.
Regards
Vijay Kumar

That are the 2 ways, how to connect as sysdba:
Password Authentication
Unless a connection to the instance is considered 'secure' then you MUST use a
password to connect with SYSDBA privilege.
Users can be added to a special 'password' file using either the 'ORAPWD'
utility, or 'GRANT SYSDBA to USER' command.
Such a user can then connect to the instance for administrative purposes using
the syntax:
CONNECT username/password AS SYSDBA
Operating System Authentication
If the connection to the instance is local or 'secure' then it is possible to
use the operating system to determine if a user is allowed SYSDBA access.
In this case no password is required.
The syntax to connect using operating system authentication is:
CONNECT / AS SYSDBA
Oracle determines if you can connect thus:
On MS Windows NT/2000/2003/XP:
On MS Windows the OSDBA groups is a hard coded group thus:
Group Name Oracle uses this as...
~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~
ORA_DBA OSDBA group for all instances
When you issue a 'CONNECT / AS SYSDBA' , Oracle checks if your MS Windows logon is a
member of the 'ORA_DBA' group.
If you don't want OS authentication, remove the ORA_DBA group from the logon id. But automatic database startup at boot time won't longer work.
Werner

Restricting items to User/Responsibilities

Similar Messages

Maybe you are looking for