Restricting no.of rows in a pre-printed layout without disturbing th layout

Hi,
We have a requirement in a pre-printed format template. It has sections like 'header/detail/footer' section.
Let say in detail section to show item details, In pre-printed layout only 13records can be shown at a time. Let say I have 50+ items want to display in detail section without distrubing the pre-printed layout.
Gone through so many forum-posting and didn't find any correct answer.
Tried some of the tips like : <?if:position() mod 13 =0?> <xsl:attribute name="break-before">page</xsl:attribute> <?end if?> doesn't work it distrubs the layout.
I see some of the vetri replies so sending template/xml to vetri's e-mail id as well. Thanks in advance for helping on this.
Thanks
Velu

Some approaches:
a) put everythign besides the table in header/footer...
b) Repeat the whole page - or repeating part using a group:
<?for-each-group:floor(position() div 13)?>
Print table header etc...
In table iterate over
<?for-each:current-group()?>
table row
<?end for-each-group?>
table footer etc..
<?end for-each-group?>
hope either helps,
Klaus

Similar Messages

Printing on a pre printed stationery

Hi,
I am trying to print data on a pre printed stationery. On one physical page two copies (1+1) of report is printed horizontally side by side. On each logical page there is repeating frame that displays 4 rows of data across the page.Now as soon as the number of records become > 4, the 5 th record instead of moving to next physical page, overlaps and sets on the logical page on the same physical. what could be done such that the 5 th record and onwards prints on the next physical page alongwith the copy of the 5 th record also displayed on the next logical page.
thanks
Prashant Mishra

Not sure if I fully understand your description, you might like to give an example of what data you have and what you want on each page.
However, for pre-printed forms, you typically use a fixed size frame to define the area that a repeating frame can print into. Alternatively you can use the "max records per page" property if you can guarantee that each record will only take up a specific amount of sapce.
Where physical vs. logical pages are concerned. You can only have multiple physical pages making up a single logical page. In your case, you seem to want to have multiple logical pages for each physical page. Since Reports will insert page breaks after each logical page, it will be difficult to do this.
If you need to get two sets of records onto a single physical page use an "across->down" repeating frame for a single repeating frame that encompasses one half of your physical (and logical) page.

Printing on Pre Printed Stationery and Bursting Extra Lines

Hi,
I am new to BI Publisher. I have managed to build a RTF template to print a check on a pre printed stationery (For Oracle Apps). There are two issues I have:
1. The check I need to print has the invoice lines on top repeated twice and the actual check at the bottom. The isse is when i print multiple invoice lines and it exceeds the section allocated for invoice lines, it pushes content down and my alignment is destroyed. What i need to do is once a certain number of lines are printed it should print the balance lines in a different file and continue the check as usual. I figured that bursting may be an option but most of the stuff on the internet points to pushing the content through email when bursting. Is there anyway to achieve this.
2. When displaying output in columns I want to achieve this in a table not using word colums
<Invoices Section>
c1 c2
Invoice Num - Amount Invoice Num Amount
1 10 4 10
2 9 5 9
3 20 6 34
<end Invoices Section>
Extral lines after the end of this section should go into a differnt file
Any help will be greatly appreciated. Thanks

Hi user953712,
1. Check format should use fixed row enumeration matched to the number of remittance lines per stub setup on the Payment Document in EBS.
2. "not using word columns"? I'd be using a table in Word. Is this a text based format? If so consider ETEXT.
"should go into a different file"? Sounds like bursting or some other mechanism.
Regards,
Gareth

How To Restrict Number Of Rows For Multiple Group In Report Output

Hi ,
I have a requirement to restrict number of rows in report output.I have three different group , if i use same no of rows to restrict then output is as expected but if i want Deduction group should have 7 rows , earning should have 5 rows and Tax group have 3 rows in report output then XML tag is not working.
Below is the XML tag i am using -
First i have declare the variable to restrict the rows -
<xsl:variable name="lpp" select="number(7)"/>
<xsl:variable name="lpp1" select="number(5)"/>
<xsl:variable name="lpp2" select="number(3)"/>
For Each -
<?for-each:PAYSLIP?>
<xsl:variable xdofo:ctx="incontext" name="DedLines" select=".//AC_DEDUCTIONS"/>
<xsl:variable xdofo:ctx="incontext" name="EarLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION!='Taxable Benefits']"/>
<xsl:variable xdofo:ctx="incontext" name="EarTaxLines" select=".//AC_EARNINGS[ELEMENT_CLASSIFICATION='Taxable Benefits']>
<?for-each:$DedLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
<?if:(position()-1) mod $lpp1=0?><xsl:variable name="start1" xdofo:ctx="incontext" select="position()"/
<?if:(position()-1) mod $lpp2=0?><xsl:variable name="start2" xdofo:ctx="incontext" select="position()"/>
Report output is tabular form (one page has two column - Earning and Deduction ) . Tax group comes below earning group.
Deduction Group -
<?for-each-group:$DedLines;./REPORTING_NAME?><?if:position()>=$start and position()<$start+$lpp?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Earning Group -
<?for-each-group:$EarLines;./REPORTING_NAME?><?if:position()>=$start1 and position()<$start1+$lpp1?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Tax Group -
<?for-each-group:$EarTaxLines;./REPORTING_NAME?><?if:position()>=$start2 and position()<$start2+$lpp2?>
<?REPORTING_NAME?>
<?end if?><?end for-each-group?>
Please let me know in case additional detail is require.
Thanks in Advance.
Thanks,
Harsh
Edited by: Harsh.rkg on Jan 14, 2013 9:43 PM

variable lpp2 is declare to restrict EarTaxLines -
<xsl:variable name="lpp2" select="number(2)"/>
This will help to restrict the no of rows on one page , if we have more then two tax benefits line then layout will roll over to continuation page.
As part of report output my expectation is if i restrict Earning , Deduction and Tax benefits to same no of line for example - variable lpp ,lpp1 and lpp2 have same value "number(2)" , we can see the layout is continue on next page (restrict every group can have max two lines) .This is the reason we have 4 header grid , deduction and Tax Benefit lines are rolled over to continuation page .But if we restrict different value for each variable then continuation page layout is missing .
When we tried for <xsl:variable name="lpp2" select="number(3)"/> value continuation page layout is not getting generate for both employee number .

Print layout in case of pre printed continous stationery

Dear Experts,
I have one query related to print layout designing.The issue is the PLD is set for an Invoice in the pre printed stationery & the printer out is take using continuous stationery the problem which i have faced is 1 page is printed properly but for 2nd page the print again starts from top so again the user have to do manual setting & print the 2nd page.
Thanks & Regards-
Manmath Das.

Dear Manmath Das,
It is too difficult to handle the print on pre printed continuous stationery by PLD. PLD is a very basic tool. You may only get it work by endless try and error to see.
Thanks,
Gordon

Printing on Pre-printed stationary from XML Publisher

Hi,
I have a requirement where a report is to be printed on pre-printed stationary from XML Publisher. The stationary would be NCR paper and has to be printed from a dot matrix printer.
My first question is whether report generated from XMLP can be printed thro'
dot matrix printer, coz as far as i know it takes only character format .If yes, do we need any special handling?
If anybody has any experience related to this problem, please let me know the approach.
Can mail me at [email protected]
Regards,
Satrajit

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

How to restrict number of rows display using ig:gridView

Hi
All
How to restrict number of rows display using <ig:gridView datasource="{mybean.mylist}">
i am getting 10 rows using data_row . i wanna show only first 5 rows .
pageSize ="5" will be ok . but it displays remaining rows in next page. but i want to display only first 5 rows . is there any attribute to restrict number of rows.
thanks
rambhapuri

I have no idea which component you're talking about. If want to discuss here about a non-Sun JSF component, then please mention about the name, version and build in detail. You can also consider posting this question at the website/forum/mailinglist of the component manfacturer rather than here. At least I can tell you that the Sun JSF h:dataTable has the 'rows' attribute for that. I can also suggest you to just take a look in the TLD documentation of the component in question. There should be all possible attributes listed with a detailed explanation about the behaviour.

How to restrict number of rows returned in a query

Hi frnds,
I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..

776317 wrote:
Hi frnds,
I'd like to restrict number of rows returned by my query to some 10 rows. how to do that.When I try doing with the rownum<10 its giving results for a particular dept and that too some 6 rows only...btw I'm grouping my table and includes joins from many a table and am ordering the table results by a column.. How to do this..
TELL ME HOW MANY ROWS YOU HAVE IN TABLE?
Because you have only *6 rows* in you column, if you less than 10 rows then it displays only containied/exist rows. nothing much
select ename,empno from emp where rownum < 10;Thanks

How to restrict number of rows returned in BIP

Hi Friends..
How to restrict no of rows displayed by the report to some 10 rows for example.. in BIP

If its in RTF you can use position to restrict.
<?for-each:ROW[position()<11]?>
You can also restrict it in your sql query using ROWNUM.

How do I create a form field ONLY template in Acrobat 9 Pro that will let the user enter and print only the form field data on a pre-printed form?

This template will be used to type in information that will then be printed on an agency's official, barcoded form loaded in a printer (instead of blank paper.) Only the user-entered info should print on the pre-printed form. Users will use Adobe Reader to complete their templates; they do not have Acrobat. Thank you!

Use the template as non-printable background and add the form fields.

How to restrict no of rows in table

Hi,
I want to restrict no of rows displayed in adf-read-only table to 10.I set rangeSize to 10 in jsp but it is not working.How can I restrict no of rows.
Regards,
Ramesh

Hi,
this sets the range size. Because ADF Faces Rich Client support scrolling the data will be fetched in ranges of 10. I suggest to filter the records within the query and always return 10 rows only. Its a strange usecase you are after.
Frank

Purchase Order Printing on Pre-printed stationary

I feel very difficult to print my purchase order
on our pre printed stationary using 6i report.
Is Text_IO utility help me .. or any other tool is
there to print critical report on preprinted stationay.
Presently, I am printing my PO by ORACLE RPT tool. old version.
Pleae Help Me ..
Regards
Milind Nikumbh
KSPL
Pune

Hi Milind
I see what you've got.
It is not uncommon to use character mode output for pre-printed stationery.
This would appear as draft output from a Dot Matrix printer. I hope you understand what I mean here. It is somthing like printing using fixed width font.
Design and run the report with MODE=CHARACTER from the command line.
You need to figure out and design the layout in such a way that you are printing in the empty spaces provided in the pre-printed stationery. This is usually by trial and error method. You may probably blow several pre-printed stationery sheets before you get it right.
Regards
Sripathy

Printing a PDF file over pre-printed template

I would like to be able to print a PDF file (file A) over the top of another PDF file (file B ). For example, file A could be a letter that needs to be sent out and file B could be the company letterhead. The resulting file would be the letter on company letterhead.
I need to be able to do this because I am printing from an application that allows limited customization of the output format. Having the ability to print one file over another would enable me to create a "pre-printed template" in an application that has more flexibility. I could then add the data from the first application over the top of the "pre-printed template."
I am using Acrobat Professional 7.0.9 on a Windows XP Professional system. If necessary I can upgrade to a more recent version of Acrobat.
Thanks for your help

I would like to do this all electronically. I don't produce a hard copy at any time but rather create the PDF and then email the file to the recipient.

Restrict number of rows to be pulled from PeopleSoft's PS_LEDGER table while importing data in FDMEE

Hi,
We need to know if FDMEE 11.1.2.3.520 product supports restricting number of rows to be pulled from PeopleSoft's PS_LEDGER table.
All the records fetched from PS_LEDGER is getting loaded into TDATASEG table.
Currently, it is trying to pull all the records based on the given "period", "version" and "year" combination. We are looking to restrict rows based on specific account/entity/program/subprogram combination.
If this is can be done, will it be an out-of-the-box functionality or does it require any customization/import scripts/api.
Admin guide does say we can use Jython to filter rows using import scripts. However, it seems to be limited to file not a table as a source.
I have attached a document with the screenshots so that the issue is better understood !
Thanks,
Hari

1)
When you set a column to hidden in a classic report using the method I described, it creates hidden form elements for that column.
<tt><input type="hidden" name="f01" value="" id="f01_0002"></tt>
You should inspect the source to figure out the name value.
Since this belongs to the wwv_flow form, we can therefore get this data with: wwv_flow.f01
Alternatively, you could have used the apex_item API to achieve the same result, which probably gives a bit better control.
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_item.htm#CHDBFHGA
select apex_item.hidden(1, col) || col col
from table
Set that column to a standard report column so it doesn't escape the html.
You can also reference the data in these fields using PL/SQL using the apex_application API:
http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35127/apex_app.htm#CHDGJBAB
2)
As above, setting the column to hidden creates hidden elements on the page. It is simply f01 because that is the only hidden field I would have on my page. With four reports on the page, you would need to be careful not to do the same on the other reports, as you would get inaccurate data. For each report, setting columns to hidden always starts with f01. In that, you would be best to use the apex_item API.
I actually initially ran into this issue when i had a tabular form on the same page as a report with hidden fields, which was causing conflicts in the page processes.
Hope it helps.

Restricting number of rows in a Pivot report

Hi All,
How to restrict number of rows per page in a Pivot layout.
My report has 1000 rows and all are shown at once instead of having a next page button after every 25-50 rows as it is the case in tabular report.
Pls Help!
Thanks,
Adi

Thank you all for the help!
--Adi

Restricting no.of rows in a pre-printed layout without disturbing th layout

Similar Messages

Maybe you are looking for