Result Listing in QE72 is grouped by Operation/Activity

Hi Experts,
In QE72, the results of listing is by Inspection Lot + Operation/Activity.
Can anyone know how to make the list shows Inspection Lot only?
I have tried modifying the layout but still showing many lines same per inspection lot if it contains more than 1 operation/activity, even deleting both operation/activity and short text.
I remember (and key users also) months ago.the list i only inspection lot.
Regards,
Daniel

QE72 is for inspection points which are by operation.  You can have a different number of inspection points for each operation.  In addition, the inspection point identifier can be different for each operation.  So how could you run this list and NOT have it display by operation level?  I guess you could have it pop up a second window to have you select the operation after you select a lot.  But SAP didn't program it that way.  So no...  You can't influence that layout to have only one line per inspection lot.
FF

Similar Messages

  • Enhance target group result list

    Hi *,
    I'm faced a requirement to enhance the result list of a target group with some SAP standard fields. Essentially persons and organizations data have to be combined in one list to export to excel.
    In the configuration I found # 30 "blank" fields to use for this purpuse. Unfortunately I have no idea how to fill these fields.
    Any suggestions.
    Thanx a lot.
    Kind regards
    Thomas

    Hello Thomas,
    you can use BAdI CRM_MKTTG_SEG_MEM_EX to enhance the structure CRMT_MKTTG_GENIL_TG_I_ATTR. This contains up to 30 user defined fields. Please refer to the customizing:
    --> Marketing --> Segmentation --> Business Add-Ins (BAdIs)
    --> BAdI: Define Display and Export for Target Group Members List
    The fields are then mapped to the context node TARGETGROUPITEM in view SEGED_HV/TargetGroupItemEOL.
    best regards,
    Johannes

  • Passing result list from Contact search to Target group

    Hi,
    I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
    Note: Here the contact structure is different in each component.
    Thanks.

    Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
    But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
    As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

  • How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

    Hi All,
    In CRM Web UI,  there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under  “Product” tab=> Product Group ID field.
    Web UI Component Details -
    UI component : TPMOE
    View : TPMOE/ProductEOL 
    Context: PRODUCT  Attribute : -PRODUCT_GRUOP
    Click on Product Group ID field then below F4 Help screen appears.
    In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
    Current technical design for Product Group F4:
    a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1”  is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
    b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
    c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
    Requirement :-
    In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
    System should query for products  with all selected product group, transferred to product list tab.
    Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
    Can we enforce same behavior like DDIC search help in Web UI too  Or suggest how we can achieve this requirement?
    Thanks in advance
    Regards,
    Arjun

    Hello All,
    We have achieved this requirement by Custom development and approach followed as  -
    Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
    Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT      
    Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
    Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
    e.  Called F4 application for field product _group with help component usage created in step d.
    Regards,
    Arjun

  • Group by in Result List

    Hi,
    Is it possible to use Group By in the Result list? I can't find it in the configuration panel, but maybe this is possible in another way.
    Thanks!

    Result Lists can only show data at the grain of the Endeca record, so no.  Usually Results Lists are used to show descriptions or other unstructured portions of the record.   It sounds as if you may have your unstructured data duplicated across multiple records after denormalizing.  Is this the case?  Is there an option to keep the unstructured attribute(s) from duplicating?

  • Is it possible to list out CATALOG ITEMS GROUP in a Query Result of a Request Offering??

    Hi Experts,
    Is it possible to list out  CATALOG ITEMS GROUP as a result of Query Result in Request Offering ?? Because each and every Catalog Items Groups are being created as a SingleTon Child Class of System.CatalogItemGroup. i.e., Each CatalogItemGroup instance
    will have its own singleton class.
    Is it possible to list out all CatalogItemGroup Instances consolidatedly in the QueryResult Window??
    Though the System.CatalogItemGroup class is an Abstract class, I tried to list out the Classinstances via powershell command as below, which lists all catalog group instances, Note: Actually these are instances of SingleTon
    Child Classes
    "Get-SCClassInstance -Class (Get-SCClass -Name System.CatalogItemGroup)"
    But when I configured the QueryResult window with the "System.CatalogItemGroup" class, it doesn't list out any Group instances in the Porta.......
    Am I missing anything, Any suggestions please???
    Thanks and Regards, Narayana Babu

    Thanks Anton, I already tried that too... But it doesn't list out any Group instances in the Portal.
    Since each Catalog Groups are individual Single ton Class instances derived from "System.CatalogItemGroup" class. Therfore If I specify the internal ID of the abstract class "System.CatalogItemGroup" in the tag below, it doesn't list any in the
    Portal.... But if I specify ID of any one of the derived singleton class, it does displays the one instance of that particular class..
    Thanks and Regards, Narayana Babu

  • Add column to my tag result list

    Hi experts,
    In our new service desk tool (crm_ui), we want to add a column to a result list, but I haven't a clue how to add it.
    What we do is: we tag certain incidents with a term, and then we follow them up by adding the 'tag' widget on our start page.
    When we click on a certain tag that we used multiple times, we see a result list.
    But we only see two collums in this list: "operation number" and "description".
    How to add a third column: "status"?? I cannot find it anywhere in our viewconfiguration. There are no available fields with this label for the ZSOLMANPRO role.
    thx

    Hello Kenny,
    It is quite complex and you might not be able to archieve it by your own. It is not an ABAP-view. The steps wouold be like that:
    1. Open you view (screen) in WebUI (CRMUI).
    2. Click on an editable field or hyperlink in the view and press F2 until you get a popup.
    3. Read which component and view this is.
    4. Go to transaction BSP_WD_CMPWB and enter your component from step 3 and select the right view.
    5. Check in the configuration (the right one as shown in the popup of step 2) if you can add a field. I thought you already did that but eventually you did not.
    6. If the right field is not available you might try to add the attribute to the context node but this is more complex.
    Eventually steps 1-5 are already enough. All of this is WebUI configuration and if you looked your your view in SM34 it might indicate that you are not really familiar with it. So be careful.
    Best regards,
    Thomas Wagner

  • Add hyperlink on the field txt in Search Result List to access Detail View

    Hi, SDN fellows.
    I have a PCUI requirement stated the following:
    1) In the line item of the Search Result List (table), there is one hyperlink in field 1.
    2) When click on the hyperlink, it will trigger the action to open up Detail View (Object Data Pattern 1 - ODP1) of the line item.
    3) Problem: When the value of the field is null, there will be no hyperlink to open up the Detail View.
    4) For work around, my requirement is to make the other fields (i.e. field 2) to have a hyperlink to trigger the action for opening the Detail View of the line item.
    I am not strong in PCUI. Please advise how to do so, while I am exploring the guide in the PCUI Book.
    Thanks,
    Kent

    Hello Kent,
    check out the settings of the Field Group element where the link is already active. Copy that settings to the Field which you want to be linked too.
    Regards
    Gregor

  • How to add a new field to an existing Generic Search result list?

    Good day,
    I'm new to the concepts of the Generic Search Framework.  I'm attempting to add a new field to an existing result list, and have that new field restricted to a value of "C".  This new field will not be displayed, it is only used to ensure that Invoice Documents with a DocStatus of "C" are returned to the B2B Application.
    From the *modification\generic-searchbackend-config.xml file, the existing
    <h4><property-group name="billing_resultlist_B2B_R3">
      <property name="BILLINGDOC" columnTitle="sbt.sbs.genericsearch.billing.invoice.title" parameterType="rowkey" hyperlink="b2b/documentstatusdetailprepare.do" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildAttributesForBillingDocumentDetails" linkTargetFrameName="form_input" />
      <property name="BILL_DATE" type="date" columnTitle="status.sales.date" writeUnderProperty="BILLINGDOC" defaultSortSequence="DESCENDING" />
      <property name="NET_VALUE" type="number" columnTitle="status.billing.detail.netvalue" fieldOutputHandlerClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" fieldOutputHandlerMethod="buildBillingNetValue" cssClassName="amount" />
      <property name="CURRENCY" type="hidden" />
      <property name="PAYER" columnTitle="gs.hd.gl.partner" linkParamClass="com.sap.isa.ui.uiclass.genericsearch.GenericSearchUIDynamicContent" linkParamMethod="buildShowPartnerLinkSales" />
      <property name="PAYERS_GUID" type="hidden" />
      <property name="SD_DOC_CAT" type="hidden" />
      <property name="OBJECTS_ORIGIN" type="hidden" />
    </property-group>
    </h4>
    I'm trying to better understand how the R/3 tables and columns are specified in the Generic Search Framework.  I know that the R/3 table and field is: VBRK.RFBSK, but in the configuration XML files, I never see this exact information specified.   How it is specified to be a part of the result set?
    After reading the section in the Development and Extension Guide, I also learned about the "allowedValue" definition, and I believe that I will use that to specify the "C" value for the Invoice Document Status field.
    I would greatly appreciate any help.
    Thanks,
    _kevin

    Hi Kevin,
    this means you are working in this section of the generic-searchbackend-config.xml
                 <property-group name="SearchCriteria_B2B_Billing"
                                 useSearchRequestMemory="true">
    Below this property
                    <property name="IRT_BDH_BILL_TYPE"                    
                              type="box"
                              entityType="BEART_BILL_TYPE"
                              tokenType="EXP"
                              requestParameterName="rc_documenttypes"
                              label="gs.att.lbl.doc.type"
                              UIJScriptOnChange="GSloadNewPageR3(this);">
                        <allowedValue value="ORDER"           description="b2b.status.shuffler.key1val2"/>                   
                        <allowedValue value="QUOTATION"       description="b2b.status.shuffler.key1val1" />
                        <allowedValue value="INQUIRY"         description="b2b.status.shuffler.key1val11" />
                        <allowedValue value="ORDERTMP"         description="b2b.status.shuffler.key1val3" />
                        <allowedValue value="CONTRACT"        description="b2b.status.shuffler.key1val4" />
                        <allowedValue value="INVOICE"         description="b2b.status.shuffler.key1val5"  default="true"/>
                        <allowedValue value="CREDITMEMO"      description="b2b.status.shuffler.key1val6" /> 
                        <allowedValue value="DOWNPAYMENT"     description="b2b.status.shuffler.key1val7" />
                        <allowedValue value="AUCTION"         description="b2b.status.shuffler.key1val9" />
                    </property>
    please try adding this new property
                    <property name="DOCUMENT_STATUS(1)"
                              entityType="CL_CRM_REPORT_SET_STATUS"
                              tokenType="RAN"
                              type="hidden"
                              requestParameterName="rc_status_head1" value="C" />
    This should do the trick. Unfortunately, I don't have a E-Commerce scenario with an ERP backend for testing purposes available to you have to test it yourself. Keep me updated with the test results !      
    Philipp Koock
    SAP CRM Web Channel Consultant
    http://www.koock.net

  • Who's Who - Restrict Result List

    Dear,
    My problem today is that my Who's Who displays all the positions from the backend in the result list.
    For example, if Mr X was in entity A til end of Dec07 and then he changed position and was in entity B. Then Who's who displayed all the results.
    That is to say, i have two records for Mr X in SAP so both records are displayed in my who's who.
    > My question is then the following: how to restrict who's who result? So that i can have only the current record in my result list and NOT ALL the records???
    Thanks a lot
    Regards,
    Cyrielle

    Tim is correct with one rider. If you add a group to the list it will unpack the group membership EXCEPT where the users are members by virtue of it being their primary group.
    Therefore, you can give read and/or write permission to a large group of individuals without including them in the mailing list.
    Note, Apple defaults to putting everyone into GUID 20. So you have to make changes to the users if you want any selectivity, but it works.

  • How to Perform Group By operation in OBIEE 11g

    Hi,
    I have created a report for the "Nationality count in department wise manner", since for this i need to give 'group by department' for getting correct answer...
    But in OBIEE 11g on presentation service how i need to give "Group BY" operation....for viewing correct count in nationality wise......
    Regards,
    Harry...

    Hi sai,
    U mentioned, but i couldn't clearly able to understand that.......Since to perform Group By i need to make some setting changes in content in Advanced Tab setting like that it is mentioned, but i need to perform in the following manner
    select count(nationality), nationality
    from per_all_people_f, per_all_assignment_f, hr_all_organization_units
    group by department
    Note: per_all_people_f-----------> dimension table, per_all_assignment_f--------------> fact table
    nationality from per_all_people_f and count(nationality) from per_all_assignment_f
    But department is from hr_all_organization_units--------->dim table
    I dont want to see the departments but i need to group the result in department manner that i was taking from the table hr_all_organization_units.....
    How to perform Group BY in OBIEE 11g.......
    Thanks,
    Harry.........

  • How to get result list parameters to an array variable

    I want to generate a text report that can be imported to excel. I want to show each test step name, status and numeric result. I found out that TS records this data to an array called ResultList in Main Sequence locals. Each step is recoded as an array element but they also collapse into a tree view, i think each array element becomes a container. How can i get a step's status, name and numeric parameters

    CK,
    It seems you are re-inventing the wheel.  XML reports are very usable for result analysis.  In fact I would say more usable than any txt or excel document you could produce.  Not to mention TestStand has the capability to log to databases (which is already built in).  And it seems that databases are the ultimate in mineable data.
    However, that being said..... to answer your question:
    What you are asking is not trivial because there are multiple contributors when creating a report.  If you look through the process model you will see all of the steps that relate to report generation.  Each one does something different based on the report options, execution status (terminated, aborted, etc..) and report type.  If you truly want to do it right then you should follow how the process model does it and add code for your new generation type.
    If you want a quick and dirty solution then you can just put some logic in the cleanup step group to parse through the ResultList and generate the file you want.  In order to do this I would create a while loop (or for loop) or a statement step that loops.  I would have it loop for each item in the array.  A for loop may be better because then you could have a different step for each step type and precondition it.  Then just grab what you want out of that result list and assign it to your array. 
    I created a simple rough example.  It doesn't account for calling subsequences or anything like that.  You would have to build logic for all of that.
    Hope this helps,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    ParseResultList.seq ‏9 KB

  • Group By Operator and statistics operation

    Hi all,
    in my model from the data service I obtain these fields
    sold_to (T)
    delivery_date (D)
    quantity (N)
    zdiff_date (N)
    zindex (N)
    I have to present a table where I have a row for each SOLD_TO and in the columns I'd like to show the average values.
    So the situation should be:
    sold_to | quantity (AVG) | zdiff_date (AVG) | zindex (AVG).
    For this I use the Group by operator where on SOLD_TO field I apply the Group1 and for the others fields I use the average operation.
    My problem .... I don't see the results..... all the average fields are empty but if I apply the sum (for instance) I obtain the right results.
    Where is the problem? Have you ever seen or tested this kind of situation?
    Regards, Roberto

    Hi,
    I applied your suggestion but doesn't work for the AVG. Only for the total (SUM).
    I have these records in input:
    SOLD_TO        |  DELIVERY_DATE | QTY      | DIFF_DAYS   | INDEX
    0000102004    |  02.01.2008           | 1500     | 7                    | 0,00467
    0000102004    |  05.02.2008           | 1500     | 91                  | 0,06067
    0000102004    |  05.29.2008           | 17,010  | 27                  | 0,00159
    Group By Operator:
    SOLD_TO (GROUP1)
    DELIVERY_DATE (NONE)
    QTY (AVG)
    DIFF_DAYS (AVG)
    INDEX (AVG OR STDDEV)
    The results is
    SOLD_TO        |  QTY      | DIFF_DAYS   | INDEX
    0000102004    |               |                       |
    But if apply the following Sigma for the Group by operator
    Group By Operator:
    SOLD_TO (GROUP1)
    DELIVERY_DATE (NONE)
    QTY (SUM)
    DIFF_DAYS (SUM)
    INDEX (SUM)
    The results is
    SOLD_TO        |  QTY      | DIFF_DAYS   | INDEX
    0000102004    |  20,010  |      125           |  0,06693
    Only with the total it seems to work.
    Regards, Roberto

  • Result List

    Depending on the search I need to change the fields in the result list. Is it possible?
    For example
    If the search type is A, the result list has field1 and field2 and if the search type is B the result list has field1 and field3.
    Thanks in advance

    Hi.
    FIRST:  In the method READ of the MAC is possible to hide/display fields setting the attributes table ET_FIELD_ATTRIBUTE.
    SECOND: Setting "SEND REQUEST" for a field in a field group is possible to raise a round trip to the server.
    In your scenario the problem is that since there are not objects in the result list the READ method in SRES MAC will not be called and the header of the result list will not change according to value selected in the DDLB. I would suggest to create VIEW of the application and pass this parameter from the source application which is calling the PCUI if it was the case, on the other hand you can also try using SCREEN Variants but i'm not sure if it works.
    Regards.
    Armando.

  • Error while adding a 'Ext No' field to Activities Search Result List on UI

    Hi Experts,
    The requirement is to add a new display field u2018External Nou2019to the activities SEARCH Result list.
    At the moment activities are displayed with start date, end date and category, now the user want to display External No as well.
    The details for that
    Target:
    Component:BT126S_APPT
    View:bt126s_Appt/ApptSR
    Context Node:BTQRACT
    New attribute 'EXTERN_ACT_ID' to be added to the context node.
    Source: component: BT125H_TASK
    View: BT125H_TASK/TaskDetailsOV
    ContextNode:BTACTIVITYH
    Attribute:Struct.Extern_Act_Id
    BOL Relation:
    BOL ENTITY: BTQRAct
    BOL Attribute: BTADVSAct -> BTOrderHeader -> BTHeaderActivityExt/EXTERN_ACT_ID
    When i tried to added the attribute to the context node BTQRACT, it gave me the error 'method CL_BT126S_A_APPTSR_CTXT CREATE_BTQRACT DOES NOT EXIST.
    please give me some inputs.
    Regards
    Krishna

    Hi steve,
    Still my issue was not resolved, could you help me to find the exact error.I have enhanced the component, view and context node, still i couldn't able to add attributes to the context node BTQRACT.I tried to add several fields, but it is giving the same error 'METHOD CL_BT126S_A_APPTSR_CTXT' CREATE_BTQRACT DOES NOT EXIST'. I have checked the OSS messages and found 2 relavant to this component. I have implemented both the Sap Notes 1363752, 1226612. Still after implementing the OSS note, i am getting the same error.My guess is one of the method is missing. Please help me out?
    Regards
    Krishna

Maybe you are looking for

  • BPM: Loop condition not coming outside of the loop

    Hi Experts, I am working on BPM. In the loop I am giving the condition as (ForSyncResponse./p1:MT_Test_JDBC_Req_response/row_response/Row/indicator u2260 9) If indication not equal to the 9(Integer) then it should come out of the loop otherwise loop

  • Lack of 64-bit version of Reader

    Who is to blame for Adobe lack of interest in providing a decent update to the now mainstream 64-bit environments for one of their mainstream products on mainstream Linux distros ? It's a shame Adobe ! I refuse to install dozens of 32-bit libs just t

  • load-on-startup not working in weblogic 9.1

    Hi I have the following xml tag in web.xml file <load-on-startup>1</load-on-startup> for some servlets, i have given then sequence 1 to 5, but for some reason 5 is loading first and the whole application crashes because of this. do i have to mention

  • Creating arrow navigation with a photo gallery

    I am in the process of creating my own phtoography website. I created all the pages in Photoshop, sliced them and am now using dreamweaver to add interactivity. The class I took showed us how to make remote rollover images with small thumbnails that

  • About to buy bose earphones, but I have a question!!!

    Well im about to buy some bose on ear or in ear headphones. I know if i buy an original bose headphone it wont fit in the iphone. So i want to buy an adapter from ebay so i can connect that to the iphone and then put my bose headphones in the adapter