BPM: Loop condition not coming outside of the loop
Hi Experts,
I am working on BPM. In the loop I am giving the condition as
(ForSyncResponse./p1:MT_Test_JDBC_Req_response/row_response/Row/indicator u2260 9)
If indication not equal to the 9(Integer) then it should come out of the loop otherwise loop needs to be repeat( Iam getting this data from the database through Send Synch step). When ever iam sending data other than 9 then it repeating if I send 9 also even though the loop condition is not satisfying and its keep on repeating the loop. Can you please let me know what might be ther problem.
Thanks & Regards,
Purushotham
Hi Prasadh,
I am able to give thie "Create the following expression in the expression editor:
/MT_Test_JDBC_Req_response/row_responseindicator != 9" expression
How can i give the second"(/MT_Test_JDBC_Req_response/row_responseindicator != 9 EX)" condition??
I tried with giving the AND but it is not allowing me to enter the 9.
Can you please let me know.
Thanks & Regards,
Purushotham
Similar Messages
-
When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?
Hi Angela1313,
I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
iTunes Gift balances
http://support.apple.com/kb/ht5035
Learn more
Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
Thanks for using the Apple Support Communities!
Cheers,
Braden -
Cancelling the GR the excise item tab is not coming after flagging the OK
Hi SAP Experts,
there is one subcon PO for excisable material for depot, after its GR it have been posted from j1iex.
Now there is a requirement to cancel the excise posting for which first of all its GRN should be cancel.
But while cancelling the GR the excise item tab is not coming after flagging the OK.
This problem is there only for the depot, for other plant Im able to cancel for subcon PO.
Thanks & Regards,
Anisha Sinhastill not cleared
-
Was trying to install windows 8.1 but didn't install bootcamp first. Am in a loop. Keep coming back to the windows setup page. What to do?
Please reset NVRAM - Startup key combinations for Intel-based Macs - Apple Support and OS X Mavericks: Reset your computer’s PRAM. You have Bootcamp settings in the nvram that are causing problems.
-
Footer not coming end of the page in BI Publisher
Hi All,
I am developing a report in which the footer output is not coming end of the page after the tabular output per group Completion.
There is a tabular group and free form group which output coming accourding to number of lines in tabular output but after the tabular output there is one
more group in the form of tabular which show the details sum of the first tabular output which i have to print each of the group end and end of that page but
when i am trying to get output it coming just after the first tabular output.
Please advice...
Regards,
Sushantyou have to use the word footer and header, and put these place-holders there
better send me the template and xml, { i guess.}i know what you are trying -
Err: The private key material is not exportable outside of the HSM
Hi,
I am working on weblogic 8.1 with sp4, Using keytool generated certificates with HardwareSecurityModule (HSM) and enabled ssl in weblogic admin console.
Now while starting the server following error is displayed
<Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Oct 4, 2005 3:18:44 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000327> <Starting WebLogic Admin Server "ncss" for domain "ncqa">
<Oct 4, 2005 3:18:49 PM GMT+05:30> <Notice> <Security> <BEA-090170> <Loading the private key stored under the alias srinualias from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
<Oct 4, 2005 3:18:51 PM GMT+05:30> <Notice> <Security> <BEA-090171> <Loading the identity certificate stored under the alias srinualias from the nCipher.SWorldkeystore file E:\bea\user_projects\domains\ncqa\srinu.>
com.ncipher.provider.nCSecurityException: The private key material is not exportable outside of the HSM
at com.ncipher.provider.km.KMDSAKey.getParams(KMDSAKey.java:59)
at com.certicom.tls.interfaceimpl.CertificateSupport.CheckIfKeyMatch(Unknown Source)
at com.bea.sslplus.CerticomSSLContext.doKeysMatch(Unknown Source)
at weblogic.security.utils.SSLContextWrapper.doKeysMatch(SSLContextWrapper.java:93)
at weblogic.t3.srvr.SSLListenThread.checkIdentity(SSLListenThread.java:323)
at weblogic.t3.srvr.SSLListenThread.initSSLContext(SSLListenThread.java:169)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:140)
at weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:126)
at weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1637)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:1009)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
<Oct 4, 2005 3:18:52 PM GMT+05:30> <Warning> <Security> <BEA-090552> <The public and private key could not be checked for consistency.>
<Oct 4, 2005 3:18:52 PM GMT+05:30> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the nCipher.SWorld keystore file E:\bea\user_projects\domains\ncqa\srinu.>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "ncss" for domain "ncqa" running in Development Mode>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "SSLListenThread.Default" listening on port 7002, ip address *.*>
<Oct 4, 2005 3:18:53 PM GMT+05:30> <Notice> <WebLogicServer> <BEA-000355> <Thread "ListenThread.Default" listening on port 7001, ip address *.*>
Please let me know if any clues.
thanks
CeenuThis is just a warning to let you know that the server was not able to verify whether the private key matches your public key, because it could not get the key from HSM. This is normal. SSL should still work.
Pavel. -
I have Adobe Photoshop Elements 10 and I wish to upgrade with Adobe Creative Suite 3 but the option is not coming up on the drop down menu
The first two issues sound like a video driver problem.
What is the make/model of your video card/chip?
What is the installed video driver number and date?
For the last issue, it could be many things, including the video driver. I'd look over this ARTICLE, and if there is nothing in the first part, then move on to tuning up the OS an computer in the second part. That would probably be a good time to post the full specs. of your computer, and also both your Project and Source footage. Finally, part three covers many troubleshooting tips, and furnishes many links.
Good luck,
Hunt -
Hello, one of our customers just encountered an execution error in a vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or 6.01. I have a simple vi that has two encapsulated For Loops. Two string arrays go in, one goes out of the outer loop. Inside the outer loop the first array is indexed. The string which results from this indexing is compared with all other strings from the second string array in the inner loop. If it matches one of the strings of the second array, it is not outputted, otherwise this string goes through the inner For Loop to the output of the inner loop and from there to the output of the outer loop. The count
terminal of the outer/inner loop is connected to the Array Size of the first/second string array. If the second array is empty, that means that the element in test from the first arry cannot match anything from the second array, so the element in test is send to the output of the inner loop and from there to the output of the outer loop. This works fine in LabVIEW 5.1 and 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never executed if the count value is zero (which is correct), but the data line running through the loop is not executed either, which is different to what LabVIEW 5.1 and 6.01 do. There, the input string is sent to the output of the inner loop correctly even if the loop counter is zero. The solution is easy - I just have to connect the output of the outer loop to the data line BEFORE it enters the inner loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is supposed to be a feature, but it brings some incompatibility in programming between the
different LabVIEW versions.
Best regards,
GabsiHi,
When a for-loop runs zero times, all outputs are 'undefined' (and should
be).
Besides, how would LV know what the output of a not executed routine should
be?
It might be handled differently in LV5 and LV6, which is unfortunate. In
both cases, the result is undefined.
It's not a bug. It's just something that should be avoided in any LV
version.
> The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
In some cases this does the trick. But if the data is changed in the inner
loop, this will effect the results if the N is not zero.
Technically, I think the output in this construction is also 'undefined'.
But LV handles this as expected / desired.
Another solution is to use a shift register. If N is zero, the input is
directly passed through to the output.
Regards,
Wiebe.
"Gabs" wrote in message
news:[email protected]...
> LabVIEW 6.1 If For Loop count terminal is zero then value going
> through the loop is not passed on to the output of the loop
>
> Hello, one of our customers just encountered an execution error in a
> vi running under LabVIEW 6.1, which doesn't exist under LabVIEW 5.1 or
> 6.01. I have a simple vi that has two encapsulated For Loops. Two
> string arrays go in, one goes out of the outer loop. Inside the outer
> loop the first array is indexed. The string which results from this
> indexing is compared with all other strings from the second string
> array in the inner loop. If it matches one of the strings of the
> second array, it is not outputted, otherwise this string goes through
> the inner For Loop to the output of the inner loop and from there to
> the output of the outer loop. The count terminal of the outer/inner
> loop is connected to the Array Size of the first/second string array.
> If the second array is empty, that means that the element in test from
> the first arry cannot match anything from the second array, so the
> element in test is send to the output of the inner loop and from there
> to the output of the outer loop. This works fine in LabVIEW 5.1 and
> 6.01, but NOT in LabVIEW 6.1. In LabVIEW 6.1 the inner loop is never
> executed if the count value is zero (which is correct), but the data
> line running through the loop is not executed either, which is
> different to what LabVIEW 5.1 and 6.01 do. There, the input string is
> sent to the output of the inner loop correctly even if the loop
> counter is zero. The solution is easy - I just have to connect the
> output of the outer loop to the data line BEFORE it enters the inner
> loop. But: I don't know if this is a LabVIEW 6.1 bug or if it is
> supposed to be a feature, but it brings some incompatibility in
> programming between the different LabVIEW versions.
> Best regards,
> Gabsi -
ust bought a Mac but music on my MacBook Pro, iPhone and iPad which all sync together is not coming up on the new Mac. I think I have turned on iCloud but still nothing.
It does not magically appear, unless iTunesMatch is turned on.
Copy the media (the ENTIRE iTunes folder) from the old computer to the new computer -
- all of a sudden today when we turn on the tv, apple tv is not coming up- just the itunes logo and a picture of a usb cable. What is wrong?
Welcome to the Apple Community.
Get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.
andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie? -
"Only files in Apple Loops format will be shown in the loop browser".
I recorded a Drum loop from my Korg m50 workstation into logic pro 9.
After recording i tried to import that loop into Apples loop library. After doing so i get this message.."Only files in Apple Loops format will be shown in the loop browser."
What do i do?
Please help.
Thanks
RohanI've recently gotten this error when I try to drag an audio file into the loops library (to create an apple loop.)
Comes along with Result Code=-43.
I'm trying to quantize some rhythmic loops using flex, then turn them into apple loops for the library.
My process:
Take original audio.
Flex it using slice mode.
Bounce in place.
Drag new region into Loops browser.
Errors ensue. -
Problem in pricing condition not coming is sales order
Dear Sir,
Here i create i new condition type for price ZMRP copy from PR00 in IDES , codition table & Access sequence also maintained in pricing procedure.
price is also update in ZMRP through vk11. but when we craete sales order my price ZMRP not coming automaticly. plz suggest where is error?
Regards,
SahilHello,
Kindly check below mentioned settings.
create condtion table (e.g 510). Attach this table in the access sequence (say z001). Create condition type (ZMRP) & attach this access sequence to conditon type. Attach this condition type to your Pricing Procedure (say zz001). Attach this pricing procesure to sales areadocument pricing procedurecustomer pricing procedure. Maintain condition record for conditon type ZMRP in VK11. Now try to create sales order. ZMRP will automatically appear in the conditons.
Note: sales order which is already created, to make ZMRP appear in it, double click on item, go to condition tab. Press "update" button. Press "carry out new pricing" and you can see ZMRP appearing in the conditons.
Award pnts if resolved.
Regards,
Kishore -
When debugging, a for loop is not entered even though the number 6 is passed to "N".
I cannot figure out why a for loop is not entered when I debug it. When debugging a value of 6 is clearly passed to "N", the number of iterations the loop is supposed to execute. So when I debug, execution highlighting just parses right over the loop, even though I request to enter the loop. Everything inside of the loop is not executed. Have you experienced this before? - Any ideas?
As mentioned by "eh" auto-indexed arrays that are empty will cause this.
A "FOR loop" will itereate as many times as is indicated by the smallest number elements in any of its auto-indexed inputs.
When you watch it in execution-highlighting, you probably will see a "0" coming in on an auto-indexed input.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Component level message are not coming up for the declarative component.
Hie
i am using ADF faces with jdev 11g.
i have created a declarative component and dropped it in my web application.
This component provides an action listener to write some app specific code.
in the listener i wrote a component level error message.
on running the app i can see that it is going to that error but it is not showing it up on the ui. same code works for other adf faces components that comes by default in the component pellete.
I tried setting the clientComponent attribute to true as well but no luck.
any idea if something wrong with declarative components?Frank,
My declarative component is dropped on my jsff. In this pages i have dropped a af:messages as well.
There is a small button in my component on which i have bound an action listner.
In the action listener i have a validation on the failure condition of which i have the code like:
if(bean == null || bean.isAuthenticated() == false){
FacesMessage msg = new FacesMessage(FacesMessage.SEVERITY_ERROR, null, "You must be logged in to vote up");
FacesContext context = FacesContext.getCurrentInstance();
context.addMessage(getVotingQuesComponent().getClientId(context), msg);
AdfFacesContext.getCurrentInstance().addPartialTarget(getVotingQuesComponent());
return;
So, i m sure my flow is going in this part of code but i dont see the message coming up marking my declarative component.
However, if i replace this message by a page level error message then that comes up fine.
Maybe you are looking for
-
Query By Example report -- option Excell?
Hi, I am currently working on a report but a can't figure out what the option Excell means? If you know, please explain. Thanks Jerome
-
Configuration of Shipment Cost Document
Dear Gurus, Anyone is having document of Step by step configuration of shipment Cost .. Thanks & regards vishal
-
Hi, I know there is a manual SORT in Numbers '09, but among all those function i can't find any SORT function. Let's say i have an output in 2 columns, A with names; B with numbers, now i want to sort column B in such a way that the names ( col A) re
-
Hi to all, Kindly explain , what is the meaning of Quantity and value updation. 1. Quantity updation means where we have to check quantity 2. Value updation means where we have to check value Thanks Ravi
-
I've been trying to download an upgrade to the OS on my MacBook for a while, and now I've upgraded my RAM to 4GB (Which was the only specification my Mac did not meet to upgrade to OS X Yosemite), and I would like to know if the App Store will allow