Result of apprisal using template

hello xperts,
where we can view the results of appraisal using templates?..is there any reporting options for this?
pls reply urgent

Hi Ravishankar,
Please using the report program RHHAP_DISPLAY_DB to view the entire report for a particular appraisal document.
Thanks,
Ganesh R K.

Similar Messages

How to filter records in EIS drill through using template SQL

Hi,
I'm looking for an option to filter records in EIS drill through using Template SQL.
For eg: If we user runs drill through on 2011, it should restrict display of Jan & Feb and should display records for other months.
I tried using NOT IN clause, but got an error.
Can any one help me in understanding how this needs to be defined in template SQL
Thanks in advance

Hi Glenn,
I'm able to filter the records for specific periods.
However, I'm facing another problem now.
When I try to run drill through I get 'OLAP_error (1192025): Unknown Error: Not a valid Entry' error.
This is happening when I include condition as ((($$ab.ACCOUNT_CODE-COLUMN $$) IN ($$Account-VALUE$$)))
Here, ACCOUNT_CODE is field from Account dimension table and 'Account' is the name of the dimension.
If I remove this statement and run drill through, it runs but shows data for all accounts (irrespective of the Account selected)resulting in incorrect data.
Our RDBMS is Oracle. Can you please help me with this
Thanks

Creating Result Type Programmatically using C#

Hi,
I had created a custom display template and have uploaded on feature activation. now i need to automate the creating of result type.
Due to less documentation with respective to result type creation using C# i am posting in forum. i had referred the below url.
http://dev.net.ua/blogs/ivanbilokon/archive/2012/11/22/11389.aspx
But when i execute the code no error. the new result type is not getting added.
I expected a result as shown below screen
Please help me. Thanks in Advance.

Hello Ram, please check the below link http://nelsonlamprecht.wordpress.com/2013/12/27/sharepoint-2013-search-result-types/
Please remember to click 'Mark as Answer' on the answer if it helps you

I'm having trouble with something that redirects Google search results when I use Firefox on my PC. It's called the 'going on earth' virus. Do you have a fix that could rectify the vulnerability in your software?

I'm having trouble with a virus or something which affects Google search results when I use Firefox on my PC ...
When I search a topic gives me pages of links as normal, but when I click on a link, the page is hijacked to a site called 'www.goingonearth.com' ...
I've done a separate search and found that other users are affected, but there doesn't seem to be a clear-cut solution ... (Norton, McAfee and Kaspersky don't seem to be able to detect/fix it).
I'd like to continue using the Firefox/Google combination (nb: the hijack virus also affects IE but not Safari) - do you have a patch/fix that could rectify the vulnerability in your software?
thanks

''' "... vulnerability in your software?" ''' 
And it affects IE, too? Ya probably picked up some malware and you blame it on Firefox.
Install, update, and run these programs in this order. They are listed in order of efficacy. '''''(Not all programs detect the same Malware, so you may need to run them all to solve your problem.)''''' These programs are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have. 
''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] 
SuperAntispyware - [http://www.superantispyware.com/] 
AdAware - [http://www.lavasoftusa.com/software/adaware/] 
Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html] 
Windows Defender: Home Page - [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx] 
Also, if you have a search engine re-direct problem, see this: 
http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If these don't find it or can't clear it, post in one of these forums for specialized malware removal help: 
[http://www.spywarewarrior.com/index.php] 
[http://forum.aumha.org/] 
[http://www.spywareinfoforum.com/] 
[http://bleepingcomputer.com]

My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is a

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [/forum/1/688252]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
My back button and refresh button and my yahoo tool bar are dimmed a lot when I open up firefox. So as a result, I cannot use the back button nor my refresh button AND my yahoo toolbar disappears a lot. I have tried to get on your chat session but it is always closed. I need one on one help. Please reply with resolution.
== This happened
==
Every time Firefox opened
== two or three months ago
==
== Firefox version
==
3.6.3
== Operating system
==
Windows XP
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 (BT-canvas) Firefox/3.6.3 GTB7.0 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdnu
*npdnupdater2
*Coupons, Inc. Coupon Printer DLL
*Coupons, Inc. Coupon Printer Plugin
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*6.0.12.448
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*Shockwave Flash 10.0 r45
*Yahoo Application State Plugin version 1.0.0.7
*3.0.50106.0
*My Web Search Plugin Stub for 32-bit Windows
*Google Updater pluginhttp://pack.google.com/
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
*Npdsplay dll

* If the menu bar is hidden then press and hold the Alt key down, that should make the Menu bar appear (Firefox 3.6 on Windows) (see [[Menu bar is missing]]).
* Make sure that you have the ''Navigation Toolbar'' and other toolbars visible: View > Toolbars .
* If items are missing then see if you can find them in the View > Toolbars > Customize window.
* If you see the item in the Customize window then drag it back from the Customize window to the Navigation toolbar.
* If you do not see that item then click the Restore Default Set button in the View > Toolbars > Customize window.
See also [[Back and forward or other toolbar buttons are missing]] and [[Navigation Toolbar items]]
See http://kb.mozillazine.org/Toolbar_customization

Questions on using templates [CS3]

Greetings,
I'm trying to figure out the best way to approach an InDesign task, and my rank-novice-level experience isn't cutting it. Normally I'd read through a gazillion help pages and do a bunch of tutorials to try and teach myself enough to answer the questions on my own - but I'm a new parent (~2 months), so don't really have the time to take my usual approach; indeed, it took me several days just to write up this question and post it. So any help is *much* appreciated!
What I'm trying to do: create ~80 cards for a board game. Each will have similar layout, so creating a template file seems like the way to go. I've never worked with templates before, but doing so seems straightforward enough for things like text, or for an illustration which would be different on every card. However:
Difficulty #1: Some cards are of one type - call it type A - while others are of type B. Several graphical elements are always the same for a given type, but are different for A vs. B. I'm sure there must be a simple way to say "this file uses all items for type A, and not B", but I'm not sure if this would be best done using different templates, different master pages, setting which layers are visible on an imported photoshop file, or some other technique. (Did I mention I'm a total novice with InDesign?)
Difficulty #2: There are half a dozen graphical elements (icons), each of which may or may not appear on a given card. Using templates or master pages for all permutations of their visibility seems like a bad idea. But if I simply delete the not-shown objects from each file (assuming one can do such a thing when using templates), that makes later changes (which might involve re-adding them) difficult. In Photoshop or Illustrator - both of which I'm more familiar with than InDesign - I'd simply make the layer/object non-visible; is there an equivalently simple way to "get rid of this object, but let it be easy to bring back" in InDesign? (I've found the "nonprinting" attribute, but that doesn't seem to hide it from view while editing, which makes verifying the layout as correct rather onerous.)
Trying to look ahead #1: Eventually, I'd like to create an InDesign document which imports all of the single card files into an easily printable layout (9 cards to a page); I'm told this is possible. Is there anything I should know to avoid shooting myself in the foot / making this task unreasonably difficult? (eg: if InDesign throws tantrums when you try to import multiple documents based off the same template, I'd sure like to know that before making 80 cards based off the same template.)
Many thanks to anyone who can help!
--Eric

I'd make the card file at the trim size, and add a bleed allowance if you need one. Export this to PDF withthe bleed, but NO MARKS.
Ah, here's where I display my novice status:
1. So you'd suggest just one card file, rather than one file per card all using the same template?
(If relevant: it would also be useful to be able to distribute 9-up PDFs of, eg, the only the 16 cards which changed in a particular revision.)
2. I'm familiar with bleed allowance, but am guessing at what you mean by "trim size", and don't know at all what you're referring to by Marks? My experience with actual pre-press production is pretty much nil.
I should probably mention, since I didn't earlier, that there is a downside to overriding master objects. If you apply a new master, or reapply the old one for some reason, the overridden objects remain and new master objects will be replaced where missing. Also, if you make any chages to an overridden object, that attribute, such as size or position, for example, loses it's link to the master and will no longer update if the master object is edited.
Mm, that is a difficulty; if I'm understanding this correctly, if I (eg) replaced or moved one of the icons on the master page, it would change on every card for which it was visible (printable), but not on those cards where it had been overridden to be non-printing - only a problem if I have to change which icons show on which cards, but that will certainly happen from time to time.
Is there a way to tell an object "stop overriding and re-load all your information from the appropriate master object"?

How to get 2nd line in smartforms using template

how to get 2nd line in smartforms main window using template. i have also defined loop .

if possible can you try with the TABLES..
Put one TABLE in your MAIN window
create table lines as per your requirment...consider all lines like 6 for header, 1 for main, 1 for total
Now, you will find three section under the tables: header, main, footer...
in header section, create a table line, assign one of the proper lines from the line types.. repeat for your all lines.
in main section, you can access your data form the loop.
the footer secion will be called, just after the main will be finished.
Regards,
Naimesh Patel

How to restrict height of table in smartform without using template

Hi Gurus,
I am facing a problem with table in smartform.I have 5 records in my table.If i print all 5 then table is fine.But if i get only one record in table then size of the table reduces to one row.Is there any way that i can keep my table height same as for 5 records,though i pass 1 record.I cannot use template here,because page-breaks are used in the form .
Your solutions are highly appreciated.
Thanks and regards,
Meenakshi

Hi,
As far my knowledge goes, If there is one record then table lines will take the height of only one row. You cannot Restrict it to take height of 5 rows.
A temporary solution could be to add empty records in your internal table so that the table uses all the 5 rows in the table while printing in the smartform. Since they are empty records your smartform will not display any data but will only use the height.
If you have 1 record add 4 empty records, Similarly if you have 2 records add 3 empty records...
This way all time the table will take the height of 5 rows.
As i said earlier this could be a temporary solution.
Thanks,
Hari Prasad.

Some clients Can't open XLSX files in Libraries using template.dotx but can open xlsx files in libraries using template.doc

If I create a new library using any Excel/Word template - DOC, DOTX, XLS, XLTX and then upload a XLSX document (or docx) then some of my clients experience issues opening the document. My work around in the past has been to resave the document
as XLS or DOC. Interestingly Old Libraries (Libraries using template.doc) don't have a problem with xlsx or docx documents. (This only works because most of the clients experiencing the problem only open a few documents and we only have to
resave a few documents. I don't know why these clients have this problem though.)
We are now testing a new Terminal Server implementation. One with OpenOffice instead of Microsoft Office. We can't open xlsx files on new libraries but can on old libraries. (docx files are not a problem though) I found a couple of
work arounds.  One work around is to click on the down arrow by the document name and select "Edit in Excel" which fails, but then clicking on the document name after will then prompt you to Open/save the document. Clicking on Open
successfully opens the document in OpenOffice. (So rather tedious for the users but nothing has to be changed to make it work.)
The other option is to create a template from one of the libraries that is working and then use it to create a new library and save my documents to the new library. Then I'm prompted to Open/Save the xlsx documents in the library.  This
option is less tedious for the user but then I have to go through and recreate any libraries using template.dotx. Creating a new library using the standard Document Library option and selecting Word or Excel 2003 does not resolve the issue - it has to
be created from a template created from an existing library that works in the Terminal Server implementation.
My boss is opting for the latter option unless I can come of with an alternative that doesn't mean additional steps for the users. Training is an issue because most of the Terminal Server users are shop floor workers.
My question is, is there a patch or fix that addresses this issue or any other work arounds that would be less work?
Additional Info: Our Sharepoint implementation is the Enterprise version is installed but we do not have the Excel related Features activated (and these can't be activated due to licensing). I'm not sure if that matters or not but it is
a different configuration from how most SharePoint installations are configured. SP1 is installed. I have not installed any recent CU's. Versions I see in Patch Status screen include 14.0.6029.1 (primarily) with some additional features
reporting 14.0.6105.5, 14.0.6107.5, 14.0.6112.5 and 14.0.6114.5.
Nancy Forbes

We have tried a couple of additional things.
We uninstalled OpenOffice and are testing LibreOffice. I also installed CMIS from the SharePoint Administrator's toolkit, added the solution, and deployed it to my sites. The "Producer" feature is activated on the site I am testing with.
I created a new library and posted some docx, doc, and xlsx files to it. All files can be opened as Read-only from the Library list. The only way I have found that I can edit the files is to Open the Library with Explorer.   I then deactivated
the producer feature and tested opening the SharePoint documents from Explorer and it worked the same.
So am I misunderstanding what the CMIS Producer feature is for?
Nancy Forbes

Alv report using templates........urgent

Hi all,
Can anyone tell me what is meant by ALV report using template. I have worked on ALV reports. Can you throw some light on USING TEMPLATE. If anybody have some document. please send it to me.

Hi
Check whether any templates defined in your orgn for different types of objects.
For example for ALV reports so and so template and for Scripts something defined.
A template means I feel a std way of displaying data as per the orgn process/standards.
check for that.
Or use the same Std function modules and display the data and enquire further what's the template is?
Reward points if useful
Regards
Anji

Error in NWDI configuration using template

Hi experts,
I am trying to configure NWDI using template DI all-in-one.I am getting an error in the middle.
error :The transport folder "/usr/sap/trans/EPS/in/CMSeoepdevEPD" couldnot be created (cannot access inbox directory :/usr/sap/trans/EPS/in/CMSeoepdevEPD/CMS/inbox)
No idea of why this error is coming.I am new to NWDI.
Can somebody explain me why this error is coming?
Thanks in advance ,
Regards,
Rajesh

Hi
the error is related to the OS folder which u cannot able to access, pls check the folder (/usr/sap/trans/EPS) exists or mounted. if you are able to access the content in /usr/sap/EPS/in----
pls give 777 or fullcontrol permissions to /usr/sap/trans/EPS/In folder ,
your basis administrator may help you in this regard.
jo

Bi7.0 to portal integration using template installer

hi frnds,
i change my connectivity step to bi to ep 7.0
now i m using template installer for full bi installation
all the step are successfully completd.
when i am cheking with java based
Note 937697 - Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
http://XX:50000/irj/servlet/prt/portal/prteventname/HtmlbEvent/prtroot/com.sap.ip.bi.supportdesk.default
it gives me three error like
1.Validity (Fri Jul 25 08:00:00 IST 2008/Sat Jul 25 08:00:00 IST 2020) of J2EE certificate SAPLogonTicketKeypair-cert is different to validity (Fri Jul 25 02:30:00 IST 2008/Sat Jul 25 02:30:00 IST 2020)of imported J2EE certificate in ABAP system
2.Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'ABI_BSE_EPT'
3.Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'ABI_BSE_EPT'
can any1 help me??
regards
vipul a kapadia

hi bro,
i solve that problme
1.Goto TCODE u2018STZACu2019 and set the System Time Zone and Useru2019s Default Time Zone to india(whatever u want)
2. give the permission to portal folder's.u can find PDF for that using search string "How to configure permission for portal" in google.
give all the permission as PDF says.
give rewards points
regards
vipul kapadia.

Not able to get all the results if i use "get-spdeletedsite" command

Hi everyone,
I am not able to get all the results when I use the below powershell command.
get-spdeletedsite -limit all
It is giving me only one site, but infact we have more than 100 deleted sites.
If I use the normal command like below it is giving the below output
get-spdeletedsite
Can any one tell me, how can I get all the deleted sites ?
Best Regards
Anil Alladi

Hi Anil,
For the Limit parameter of Get-SPDeletedSite cmdlet, when we specify its value to ALL, it will return all site collections for the given scope.
For your scenario, the script “Get-SPDeletedSite –Limit ALL” will return all deleted site collections in your SharePoint environment.
If you want to get all deleted site, you can export the result to csv as below:
Get-SPDeletedSite | export-csv out.csv -notypeinformation
Reference:
http://technet.microsoft.com/en-us/library/hh286316(v=office.15).aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Using templates [subject edited by moderator]

I do not understand the usage of the Template feature. I have a site folder, and uploaded successfully my index.html file to the website/internet.
Then, I made a template out of the index file. Dreamweaver created a Templates subdirectory, and changed the file to index.dwt. All subsequent pages have .dwt. Tried to upload the index file and related pages to the web, but apparently the web/internet does not read .dwt. Consequently, how do I create a 100 page website using templates, and then upload them to the internet so the internet can read them?
Thank you.
GDG

The .dwt files are not uploaded to the web (nor should you ever find one there) - they only affect your local HTML files, which must then be uploaded. A template is used to spawn child pages (the method depends on which DW you are using) and it's the child pages you upload.
Templates are NOT intuitive, and require a little study before you can use them effectively. You'll find some help under the F1 help in DW.

How to use template.fmb file within form builder

Hi
I have created forms without using template.fmb file
and deploy them on EBS then they working fine
But when I try to use template.fmb file then it gives an error
following are the steps :
1:open template.fmb file with form builder
2:rename that file with XXXX.fmb
compile that file and deploy XXXX.fmb file in AU_TOP
after that
in putty i m trying to create XXXX.fmx file in same TOP but it gives an error
Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package specification APP_CUSTOM...
No compilation errors.
Compiling package body APP_CUSTOM...
Compilation error on package body APP_CUSTOM:
PL/SQL ERROR 302 at line 22, column 19
component 'DISABLED' must be declared
PL/SQL ERROR 0 at line 22, column 5
Statement ignored
PL/SQL ERROR 201 at line 40, column 5
identifier 'APP_WINDOW.CLOSE_FIRST_WINDOW' must be declared
PL/SQL ERROR 0 at line 40, column 5
Statement ignored
Compilation errors have occurred.
Form not createdfollowing is command
$ frmcmp_batch module=$AU_TOP/forms/US/XXXX.fmb userid=APPS/apps output_file=$AU_TOP/forms/US/XXXX.fmx module_type=form batch=NO compile_all=special

for you question - EBS General Discussion General EBS Discussion
Compiling Forms In R12
and search on forum

Result of apprisal using template

Similar Messages

Maybe you are looking for