Result recording & display of multiple tests/analysis of single sample

Hello Friends
Here is my scenario;
I receive 500 kgs of material in 5 bags. I want to draw sample of 1 kg from each bag. Thus I will be having 5 samples. I will perform the required tests on each sample. For testing I am consuming @250 gms of material. Out of 5 samples, I had to conduct the retest on 2 samples. I want to do the result recording of these tests/samples. In my understanding there will be 7 result recordings which will include 2 of Retest of 2 samples. I would like to display all the values recorded ( atleast for each samples ). Also, I would like to see the individual values and not the averaged out values the recordings.
How can I take care of constraints due to pooled sample i.e. it allows only the result recording of pooled sample and not the subsequent samples.
I would appreciate your detailed guidance on this issue.
Regards
mahesh

Hello Lenin
Normally, we use Sampling procedure with Fixed Sample as Sampling Type withAttributive inspection non confirming units as valuation mode. Determination Rule as 10 ( Fixed Sample ). Sample drawing Procedure followed is "draw from all containers". Irrespective of our present settings, I would appreciate if you let me know the settings to be made in order to map given scenario.
Regards
mahesh

Similar Messages

ECATT calling multiple Test script to single test script

HI experts,
How to integrate i mean calling multiple test script to single test script and store in single test script in ECATT
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Apr 8, 2011 9:50 AM

HI experts,
How to integrate i mean calling multiple test script to single test script and store in single test script in ECATT
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Apr 8, 2011 9:50 AM

How to display the multiple rows in a single column ?

Hi,
I have the Query like this :
SELECT MS.SUBJECT, MS.MESSAGEDESC, MS.MSGDATE, MAT.ATTACHMENT
FROM MESSAGES MS, MSESAGEATTACHEMTASSO MAA, (select pga.programid,
act.accountname,
row_number() over(partition by pga.programid order by act.accountname) rn
from accounttypes act, programpursesasso pga
where act.accounttypeid = pga.accounttypeid ) MSGATTACHMENTS
WHERE MS.MESSAGEID = MAA.MESSAGEID
AND MAA.MSGATTACHMENTID = MAT.MSGATTACHMENTID
AND MS.MESSAGEID = 1;
If i have multiple messageAttachments for single message ., i want to display them in a single row.,
like :
subject messagedesc msgdate attachment1 attachment2 .....attachmentn
test test 10/10/2007 test test test
can any one help me out ., how can i do this using simple sql query ?

Hi,
Thanks for the Reply .,
I have the 2 table like :
DESC MESSAGES;
Name Type Nullable Default Comments
MESSAGEID NUMBER(16)
EMAILFROM VARCHAR2(50) Y
EMAILTO VARCHAR2(50) Y
SUBJECT VARCHAR2(500) Y
MESSAGEDESC VARCHAR2(2000) Y
MSGDATE DATE Y
MSGSTATUS NUMBER(1) Y
MSGDELETESTATUS NUMBER(1) Y
SQL> DESC MESSAGES;
Name Type Nullable Default Comments
MESSAGEID NUMBER(16)
EMAILFROM VARCHAR2(50) Y
EMAILTO VARCHAR2(50) Y
SUBJECT VARCHAR2(500) Y
MESSAGEDESC VARCHAR2(2000) Y
MSGDATE DATE Y
MSGSTATUS NUMBER(1) Y
MSGDELETESTATUS NUMBER(1) Y
SQL> DESC MSGATTACHMENTS;
Name Type Nullable Default Comments
MSGATTACHMENTID NUMBER(16)
ATTACHMENT CLOB
ATTACHMENTDATE DATE Y
SQL> DESC MSESAGEATTACHEMTASSO;
Name Type Nullable Default Comments
MSGATTCHID NUMBER(16)
MESSAGEID NUMBER(16) Y
MSGATTACHMENTID NUMBER(16) Y
What I need Is :
If One Msg is having multiple attachement , then i want to display all the attachment in a single row along with MsgSubject, MsgDate, MsgDesc like
I want to dipaly the MsgSubject, MsgDesc, MsgDate, Attachment1
MsgSubject MsgDate Msgdesc Attachment1 Attachment2 Attachment3 ...etc

Result recording inprocess inspection for production order!

Hi,
I have a scenario in for prod order in process inspection.
I have an operation to machine the shaft for 3 hrs. And every hour I need to take an reading and note down in the inspection. For the same reason I created master data of MIC Quantitative, Sampling procedure with sample size 1
On routing for the same material, Usage 1 and status 4 Released for general, Inspection point 200 and sapmle drawing procedure with fixed qty 3.
Generated a prod order and released, got inspection lot for lot origin 03. But when I try to enter 3 different readings per hour could not able to achieve this.
Kindly help me out.
Regards,
N. Nagaraju

Are u using physical samples? If not, I wouldn't use the sample drawing procedure.
Set your characteristic to individual results recording in your control indicators. Set the sampling procedure to be a fixed sample size of three.
You should be able enter three results then for the characteristic.
FF

Result Recording QM

My problem is I Choose 100% Inspection Sample Procedure Is 100%
When I Go To Result Recording ,I have lot of 20 nos the Sample are 20but ICan Do Recording For Only 15 nos What setting I Do To Record Results For 20 Nos .
Please Mail me At [email protected]
Regards
Sanjay

I think you need to check the following -
Select the characteristic under consideration in QP02.
Go to the sampling procedure.
In sampling procedure, check the sampling type - whether it is 100% or fixed sample or % sample.
Then check the sample tab where I doubt you will find 75%.
To check this try another lot size of 40 pieces and see the sample size you get.
This shall give you result or a lead to another solution.
Please reply,
Regards,
Narendra Lohokare.

Decimal places display at the time of results recording

Dear All,
Please i faced one problem, At the time of results recoridngi/.e,
In my insp. plan i defined Quantitative specification as 70.0 with '1' decimal place in Qunatitative data. but after results recording it displaying one more decimal place excessi.e., as 70.00. How can i solve this problem, due to what this problem is occure. Please if any, solve its urgent.
Regards,
Vijaya

Dear Vijaya,
While entering Inspection Characteristics.. There is a field called DecPlaces on the right. its the 24th field on the item table.
The field comes after
Method, Insp Method plant, Version, Sampling Procedure, Sample Unit of Measure, Base Sample Quantity, SPC Criterion, Modification Rule, Test Eqpmt, Test Equip Short Text, Par Sample, DecPlace, Unit of Measure, Target Value, Lower spec Lmt, Upper Spec Lmt... and so on...
Regards
Vijay

Short Text Display of Insp. Char in Result Recording (QE01) Screen

Hi All,
I have created Inspection plans with MICs. MICs Short Texts are maintained in multiple languages. (Ex: EN & FR)
I have created an Inspection lot with Login Language EN. When I want to result record this inspection lot (QE01) with login Language FR, Display of "Short Text for the inspection characteristic" in QE01 is in EN rather than FR.
Is it a standard SAP behaviour? If yes, what is significance of maintaining short texts in multiple languages?
If not, How can this be corrected?
Thank you in advance.
Regards,
Pradeep

hi
Not very sure but
In Su3-->Parameters Enter
CP13     BC Sets: List of languages for language-dependent values
DYL     Screen language
HLG     PC translation interface help language
This might solve you problem
Regards
Sujit

Report of result recording for multiple batches in a given time span .

Dear team ,
I am looking for a standard SAP report that gives the details of result recording with all the characteristics for mulitple batches in a given span of time . The MICs will show the actual values recorded for each of the batches.
The colums may be like this
material/batche/lot/quanity/mic1 value/mic2 value/mic 3 value...........
A standard report is prefered and we would also like to have a trend analysis done for the batches .
Looking forward to hearing from you .
Ram

Thanks for the answer Firefighter.... cheked the t code and seems to be useful . But I would like to have the report in the folowing format . Kindly guide.
SN MATERIAL BATCH INSPECTION LOT QUANTITY CHARACTERISTIC 1 CHARACTERISTIC 2 3 4
Ram

Displaying operation long text in results recording screen

Hi, all!
I am trying to understand why I cannot display the operation long text when in results recording screen (either QE51N or QE01 transaction will not support displaying of operation long text).
I have checked all areas that I could think of in config to see if there is a display setting that will require to be activated and I could not find anything under Results recording, Inspection planning or General settings. I also tried to see if user settings may be making a difference and it did not. The SAP Help portal when talking of long texts available in results recording lists the following: Long texts for inspection lot, inspection method and inspection charcateristic. Nothing about operation long text.
However, the text is printed on the inspection instruction standard form.
SAP Notes has nothing on the subject that I could find.
So, as a last resort, I would like to ask if any other Quality Management specialist came across this and spent any time in determining if this can be done and why the information would not be displayed standard in the transactions. My client would prefer not to have to print the instructions in order to see the entire text. However, I do not see any standard way to have it displayed.
Any help would be greatly appreciated.
Thank you in advance!

Hi Senthil,
Don't know it will help or not. But if your MIC is qualitative then you can use the long text of catalog code in QS42.
Please refer below screen,
Click on the which help to maintain the long text.
Regards,
Sandip

Error while result recording for test equipment

Dear Gurus
My scenario is to do unplanned maintenance for test equipment and recording the result.
For that I have done the following steps
1)     Created Notification for the test equipment (customized notification type TE).
2)     For that notification I created order. (customized order type TE01).
3)     Attached General maintenance task list for that order. Task list has inspection point 300.
4)     Released the order and saved. Inspection Lot is created.
5)     In QE51N / QA32 when I tried to do results recording, it shows the following error.
"Equipment VERN01 do not exist in the object list for order 4001214"
Please help me to correct this error.
Regards
Babu R

Hi
I applied oss and today I got reply. When 1278254 notes is implemented it is solved.
I have one more question, now in QE51N, I did result recording and when saved it is asking for order confirmation, I have given all data and came back to the same screen. There is one more option for Valuate Inspection Point. In that I have selected Can be used option and saved. Now if I goto maintenance order and TECO the order, it is saying that A usage decision has stll to be made.
Whether I want to take UD once again in QA32 ?
Also is there any settings to TECO the notification automatically when the maintenance order is TECO'ed. Now the notification is not TECO'ed when order is TECO'ed.
Babu R

Multiple result recording against single MIC

Dear Experts,
In Case of calibration, for example i have assigned as one MIC to Operation, now after generation of Inspection Lot can we record multiple reading against single MIC. Please guide
thanks
DM

Hi,
I presume that apart from inspectopn point u have done all necessary steps .
Is lnspection lot generating .
1)If it is get generated then while result recording it will ask for identification.
2)Enter any indentification (for ex a, b, c etc ) and save the result. Don't take UD as u want to take multiple result recording for that MIC
3)Again go to result recording tab
Follw step 2 & 3 as long as u want to thak no of results.
IF not clear clear tell me ur requirement in detail & what u steps u have applied.
Amol

Multiple results recording for Delivery inspection lot

Hi Gurus,
My requirement is to configure for quality results recording for sales delivery document. Where client wants to record Customer, supplier, Umpire, etc results record for inspection characteristics.
I got response from few Sapiens that I should use Inspection point concept for multiple results recording. Could anyone cna tell me how can I do this.
Your help will be highly appreciated.
Thanks,
Kumar

Hi Kumar,
Okay!
First of all letu2019s try to understand whether inspection points are really suitable for your requirement or not. Accordingly further errors can be eliminated. I just try to understand.
A- Using Inspection Points
1.     Inspection points are used when you inspect the same parameters again and again.
2.     When you click on results tab in QA32, system asks you put some identification number. Letu2019s say you put A1 and then press enter. Thereafter you record the actual results (LENGTH, WIDTH etc.) You save this without giving UD.
3.     For the next time when you again click on results for the same inspection lot, system again asks you to put identification number. This time suppose you put A2. Then again you record the results (LENGTH, WIDTH) for A2.
4.     Likewise you can retrieve the inspection results from system with respect to inspection point (identification point).
5.     Typically this can be used for chemical industries where you record the temperature of the same chemical after every ½ an hour. Here 10:00 am, 10:30 am can be used as identifications numbers. As a result of which you can get the information that at 10:00 am temperature was 40 Deg and at 10:30 am it was 75 degree Celsius.
If your requirement resembles this situation, then only the use of inspection points would be fruitful.
B- Without Inspection Points
But if you want to record the readings by various agencies like customer, umpire (refer following pattern)and want to compare them there are other ways.
1.     Reading by your inspector
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
2.     Reading by customer
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
3.     Reading by umpire
a.     LENGTH u2013 100, 101, 102mm (average is 101mm)
b.     WIDTH     - 10.50, 10.50, 10.60mm (average is 31.6mm)
You can achieve this without using inspection points also. For this in QP02 you need to create 3 operation; Inspector, Customer and umpire respectively. Feed the MICs in each of these operations. When you click on result tab system will throw pop up for these 3 operations. Double click on Umpire if you want to record results noted by umpire. Likewise for rest of the operations. You can do this even after UD also (after 1-2 months also). You need to use MIC with control indicator as long term characteristics for this in QS23.
Regarding averaging of results u2013 This can be achieved using single result recording MIC with or without inspection points. Use appropriate sampling procedure. When you feed results in QA32 system automaticaaly averages out the reading. This can be viewable against phi symbol.
Finally you did mention that u201Chere I am not getting the newly created inspection lotsu201D. Does that mean inspection lot (10 origin) has not created?
Regards,
Anand Rao

Requirement of displaying inspection method in result recording

Dear All,
My clients requirement is to have the inspection method code in the result recording screen. I have the option of inspection method short text in the result recording screen. But i want a code should appear so that user can see the same for his convinient reference.
Regards,
Anil

Dear Anil,
You can create attachment in word of whatever data you want to maintain for inspection method. you can also save drawings in this attachment. assign this attachment to inspection method .You can assign attachment by
Service for Object=> Create=>Create Attachment
Now this attachment u can view while doing result recording & parallaly u can record results. Hope this will help you.
Regards
Amit

Multiple records displayed on form at one time- 2 lines for each record

Hello,
I have a canvas in which I want to display 8 records at at time, so in the data block I specified 8 as the "number of records displayed" value.
However, the record has too many fields to display on 1 vertical line, so I want to split the fields into two separate lines, so there will still be 8 records but each in two lines.
How do I do that?
I'm using Forms 10g. The block is a database block using FROM CLAUSE QUERY , and the canvas is stacked.
Thanks

Sandy,
You will need to set the "Distance Between Records" property for each item in the Multi-Record Block. This will increase the space between rows so you can stack them into two rows. Unfortunately, you can't set this property at the block - so you have to set it for each displayed item.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Displaying long text maintained for selected set codes in result recording

Hi Gurus,
I have maintained qualitative mic.For this mic i have defined selected set codes & for these selected set codes i have maintained long text.
My client requirement is that this long text should be visible while doing result recording for the mic.Is this possible.
Regards
Amit

How can they expect that? Long text can be... well.. long....... How can you include that on the same screen as results recording. What if you have 5 charac with long text? What if each selected set choice has long text and you had two choices for each? That's ten sections of long text on one screen? Impossible.
Printing the long text on the cert shouldn't be a problem. You just have to get someone to code it into the layout set.
Craig

Result recording & display of multiple tests/analysis of single sample

Similar Messages

Maybe you are looking for