Result row while using hierarchy

Hi All
In one of the reports I have brought a hierarchy from the free characteristic.Although KF values are showing up for the nodes within the hiearchy ,The hiearchy main node shows a * against it.
Does any body have any idea on whats going wrong?
Is there any way to get the result row activated.
Thanks
JP JP

Hi,
the '*' symbol is because of diffrent units or currencies in underlying data.
You can do a conversation for unit/currency or use NO DIM for a formula in query.
NO DIM delivers purely numerical values of the expression and suppresses units and currencies.
Regards
Andreas

Similar Messages

Problem in positioning of the Overall Result Row when using a hierarchy

Hello All,
i've built a query on a hierarchy and i want the 'Overall Result' to be displayed at the bottom.
I've made the following setting in the Query Designer
<b>Query Properties -> Display -> Results Position -> Bottom/Right</b>
but still, the 'Overall Result' is displayed at the top of the result rows.
Could some one please tell me if this is how the functionality is expected to work when a hierarchy is used for display ?
We are on BW3.1 SP 9
Best Regards,
Sanjay<b></b>

Hi Roberto,
could you please let me know if the following analysis of mine is correct.
The Overall Result will be dispalyed at the top if the 'Position of Lower-Level Nodes' is set to 'Down'(default setting) in the Hierarchy Properties of
the characteristic. If the 'Overall Result' is required to be at the bottom then 'Position of Lower-Level Nodes' has to be set to 'Up'. It is not possible to display the Overall Result at the bottom with the 'Position of Lower-Level Nodes' set to 'Down'
Will greatly appreciate your help !
Best Regards,
Sanjay

Assertion failure error while using hierarchy column in 11.1.1.7.1

Hi all,
I have done In-place upgrade of OBIEE from 11.1.1.5 to 11.1.1.7. Afterthat installed 11.1.1.7.1 patchset also.
Dashboard prompts were created by using hierarchy column. While applying hierarchy prompt i am getting below error
Assertion failure: levels.size() > start_pos at line 843 of project/weblayoutbuilder/viewlayoutbuilderutil.cpp
Error Details
Error Codes: ACIOA5LN
Some times presentation services will restarted automatically.
Kindly give a solution regarding this.
Thanks in advance

This is occuring due to Bug 17334677 in 11.1.1.7.0. It has been fixed in future versions and backported to SOA BPM 11.1.1.7.0 Apply Patch 17334677

How to Add and delete a row while using Abstract Table Model

Hi,
I need to do the following functionalities in JTable.I've done tht but a small problem.
1. Adding a row (Using addRow() method from DefaultTableModel).
2. Deleting a row(Using setRowCount() method from Default Table Model).
3. Sorting the table based on the selection of column(Using TableSorter which is using AbstracTableModel).
As the sorting is mandatory i've to change my model to Abtract Table Model
The problem is this Abstract Table Model doesn't have any methods to Add a row or deleting a row (setRowCount()).If anybody has written any utility method for this using Abstract Table Model help me.

Using TableSorter which is using AbstracTableModel).If your talking about the TableSorter class from the Swing tutorial, then you create the TableSorter class by passing it a TableModel. There is no reason you can't use the DefaltTableModel.
I changed the code in TableSorterDemo as follows:
        String[] columnNames = {"First Name",
                                        "Last Name",
                                        "Sport",
                                        "# of Years",
                                        "Vegetarian"};
        Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new BigDecimal(1), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new BigDecimal(3), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new BigDecimal(2), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new BigDecimal(20), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new BigDecimal(10), new Boolean(false)}
          DefaultTableModel model = new DefaultTableModel(data, columnNames)
               public Class getColumnClass(int c)
                    return getValueAt(0, c).getClass();
        TableSorter sorter = new TableSorter(model);
//        TableSorter sorter = new TableSorter(new MyTableModel()); //ADDED THIS

Result row won't summarize

Hi all,
I have a report where I have column A, B, C and D. They all consists of formulas.
The problem is in the overall result row (or the top node in a hierarchy). For column A and B I want the result row to use the formulas and this works fine. But for column C and D I want the result row to use the summation function. I have tried setting the "Calculate result as..." to Summation but this does not make a difference. Any ideas why this isn't working? Or other settings I might try?
Any suggestions will be appreciated!
Thanks and regards,
TMV

I have already tried this and it doesn't make a difference. When reading the following in SAP Help I get the impression that it is not possible to force summation when you have subsequent calculations. http://help.sap.com/saphelp_nw04/helpdata/en/4d/af1dc766d5df44bfdb76f7e54d16e2/frameset.htm
Am I right? And does anyone know a workaround for this?

Charts (Line chart) in apex 2.0 /3.0 limit of resulting rows in char area

Hello @apex experts,
does any body knows if there is a max number of resulting rows by using a line chart. It seems that until 150 resulting rows all is o.k. but when I try to get a line - chart area for a whole year (365 days) no chart is displayed. I spread out the chart area to 2056 x 800 px but no restult is displayed by using the > 300 resulting set.
Regards and thank you for help

I changed this and put usage of UTL_FILE into a dynamic PL/SQL. The package will
compile and work unless you want to create debug information. If yes, then it will raise an
error message. So, you don't need UTL_FILE execution priviledge from your DBA.
I opened the package and you may modify it the way that you don't need any public
synonyms and no UTL_FILE to run it.
There are so many questions in this forum related to "What is my DBA going to say?" or
"How is he going to react?". Even for some minor issues. I have myself also seen some
of similar situations and the only thing I can sey is:
You got to use that powerfull tool Oracle Database instead of hiding it away from your
users and developers. Learn how to control it instead of prohibiting access to it! Otherwise,
it's just a waste of money.
Denes Kubicek

Result row problem in query.

Hi,
There is a hierarchy at the query level. When the report is run with disabling the hierarchy i am getting following output in result row =1 which is correct.
                                    Column A
StoreA                              1
     DepartmentA               1
                ClassA             1
Result row                       1
When hierarchy drilldown is removed to one level i am getting different output which is 2.
                           Column A
StoreA                              1
     DepartmentA               1
Result row                       2
Why i am getting different result row just by removing drilldown to a level? The setting Calculate result row as is put as "Sum".
Please help me to resolve this issue.
Thanks & Regards,
Virinchi.

You have chosen a currency field which has multiple currencies ie 1000GBP and 2000 EUR - hence * for the total
Include the unit of currency in your query and supress result rows for the user - then you will get a total per currency code
Or of course you coudl nodim the result and add that up (ie in the exampel above you will get 3000
edit: sorry double post with Praveen above
Edited by: Simon Turnbull on Dec 30, 2008 2:10 PM

Hierarchy results row problem

Hi All,
I have a Hierarchy on infoobject 0MATERIAL. When we execute the report, the results rows are only shown for some nodes but not for others of the same level. The setting "Root/Totals Item Appears Above" is set. Also, the characteristic 0MATERIAL is set in the query to always display results.
Can you help me in sorting this out?
Cheers

Hello,
Please let me know how did you set the following setting in query :
"Root/Totals Item Appears Above"
Thanks in advance.
WIth regards,
Anand

Hide Result row when SUMCT is used

I am using SUMCT function in one of the formula that is used in the query. I am getting the correct value for my reeport when the result row is displayed.
Now I want to suppress the result row. If I set the result row to be suppressed, the formula gives me incorrect value.
Is there a way to continue using the SUMCT function and also suppressing the result row?
Are there any workaround to achieve this functionality?
Any help will be appretiated.

Hello All,
I was able to workaround the problem by using "Constant Selection" instead of the SUNCT function.
I am now able to get the correct data when even I suppress the result rows.
Regards

Result Row of Formula is not using the displayed values

Good Day,
I got a query with following layout
                    Child Ship     Parent Ship     Rate
Child          Parent          ST     ST     %
Material A                         F6WH           F6WH     55     22     250,00
          F7D1           F7D1     55     33     166,67
          F8LG           F8LG     55     11     500,00
          Result                  55     66     250,00
The child ship key figure has a setting calculate result as average to display the total shipment of the child. Rate is defined as formula Child Ship %A Parent Ship.
In the result row as Rate I require 83% (55 divided by 66).
It seems that the Rate formular still uses the SUM of child ship 555555 (165 diveded by 66).
Anyone an idea how to get the "wanted result" of 83% ?
Thanks for all replies in advances (points will be assigned).
Axel

Hi,
As far as i understand the issue is with the child ship keyfigure in that you have selected calcualte result as average which is only for display purpose that result cant be used for futher calculations.
If you want to calculate the average make use of exception aggregation.
Make a new formula and put you keyfigure for which you need to calculate avg. then hit Aggregation tab---Exception aggregation as average and refernce characterstic choose on which you are getting unique set of values.
Then continue with your other steps.
Hope it helps.
Regards,
AL
Edited by: AL1112 on Jun 8, 2011 2:35 PM

Manipulate the result rows using routine or fm

Hello BW Experts,
Can we manipulate the BW result rows in Bex using any routine or fm.
Suggestions appreciated.
Thanks,
BWer

Dear BWer,
Following is a sample code for ZXRSRU01:
You can get the data from Queries or any other objects.
Is this what you are lookign for ?
Good luck, BB
Variable Type
case i_vartyp.
when 0.
case i_s_rkb1d-infocube.
when '0SD_C03'.
clear: g_vir.
refresh: g_t_price1,
g_t_price2.
Loop selection table and get Price Id and Price Year
loop at i_t_var_range into g_t_var_range.
case g_t_var_range-iobjnm.
when 'PR_ID1'. g_vir-pr_id1 = g_t_var_range-low.
when 'PR_ID2'. g_vir-pr_id2 = g_t_var_range-low.
when 'PR_YEAR1'. g_vir-pr_year1 = g_t_var_range-low.
when 'PR_YEAR2'. g_vir-pr_year2 = g_t_var_range-low.
endcase.
endloop.
Insert prices to table g_t_price1
if not g_vir-pr_id1 is initial.
select *
from zprice
into table g_t_price1
where price_id = g_vir-pr_id1
and price_year = g_vir-pr_year1.
endif.
Insert prices to table g_t_price2
if not g_vir-pr_id2 is initial.
select *
from zprice
into table g_t_price2
where price_id = g_vir-pr_id2
and price_year = g_vir-pr_year2.
endif.
endcase.
endcase.

Drilldown on structure with hierarchy display shows additional result rows

Hi all,
difficult problem to explain, but I'll try:
- a structure for the rows axis
- the structure contains hierarchical elements
- each leaf node in the structure is defined as a characteristic C, restricted to certain values from a hierarchy
- additionally characteristic C is on the rows axis below the hierarchy (for detailed drilldown)
- for the row axis, "display as hierarchy" is selected (initial drilldown until structure only)
- on the columns some key figures
- zero suppression set to active for rows
So in Query Designer it looks like this:
1) Structure S
---> Subnode S1
> Element 1 (Characteristic C restricted to value V1 and V2 from hierarchy H)
---> Subnode S2
> Element 2 (Characteristic C restricted to value V3 and V4 from hierarchy H)
2) Characteristic C
Now what happens at runtime:
1. The user opens Subnode S1 and sees 1 row with cumulated values for V1 and V2
2. The user drills down further to Characteristic C
3. He sees 2 result rows below "Element 1": row 1 with value V1, row 2 with value V2
All fine.
4. Now the user opens subnode S2 and drills down to Characteristic C.
5. => The user gets 4 result rows for "Element 2":
    - one row with value V3 (as expected)
    - one row with value V4 (as expected)
    - one row with V1 and empty values (empty values OK, but complete row not expected!)
    - one row with V2 and empty values (empty values OK, but complete row not expected!)
So, apparently the OLAP processor has some issues when mixing structures with restricted elements, hierarchies and drill downs
Note: this is exactly the same behaviour as the last poster in this thread noticed:
[Re: Adding Hierarchy to Structure|Re: Adding Hierarchy to Structure]
Does anyone know about workarounds / solutions?
Hendrik
Edited by: HMaeder on Feb 25, 2010 5:31 PM

Advice from SAP so far is to go to BI Frontend SP11, which should solve the problem.
Edited by: HMaeder on Mar 17, 2010 10:04 AM

Display only the result rows only by using condition or any other way

Hello Everybody,
I've a web report where I want to diplay ony the result rows and don't want to display the detail rows at all. I could hide the detail rows but these rows still appear without any value in the key figure fields.
I tried to revove the characteristic field from the drilldown but it doesn't show the report correctly. Then I tried to write a condition to filter the detail rows but this condition doesn't apply to the result rows so this effort also didn't work for me.
Is there anyway we can display the report with only the result rows ? I've already tried to find out a solution on SDN but couldn't get the solution eventhough I found many posts on this kind of requirement.
Any help would be greatly appreciated.
Thanks
Alok

Please explain when you say
"I tried to remove the characteristic field from the drill down but it doesn't show the report correctly"
What is problem there? What result do you get. If possible please provide details of columns layout and few numbers

No Query Result After Using Hierarchy Node Variable (Customer Exit)

Hi
I have problem at my query. It doesn't show anything in BEx but when i check the data in BW using tcode LISTCUBE i can display the data.
This problem happen when i change the restrictions for one of characteristic in filter value.
The characteristic is custom Infoobject (ZCPARTNER), which like Infoobject Partner Unit.
Previously I set the restriction with constant value, example : A500,A700,A710,A720,A730,A740 and it worked before.
But when I change it using hierarchy node variable (customer exit), this problem is arise.
Here is my code at ZXRSRU01
WHEN 'ZHIEPART'. --> hierarchy node variable
   BREAK-POINT.
    IF i_step = 2.
    Read from ZZCONSGR information
      LOOP AT i_t_var_range INTO loc_var_range
         WHERE vnam = 'ZZCONSGR' OR vnam = 'ZOCONSGR'. --> read input value from consolidation group variable
        CLEAR l_s_range.
        CLEAR l_s_range-low.
        IF loc_var_range-low EQ '000000000000030000'
           OR loc_var_range-low EQ '000000000000010130'.
          l_s_range-low = 'MEZBUNITMDI'.
          l_s_range-high = '0HIER_NODE'.
        ELSEIF loc_var_range-low EQ '000000000000040000'
           OR loc_var_range-low EQ '000000000000010160'.
          l_s_range-low = 'MEZBUNITMPI'.
          l_s_range-high = '0HIER_NODE'.
        ENDIF.
        l_s_range-sign = 'I'.
        l_s_range-opt = 'EQ'.
        APPEND l_s_range TO e_t_range.
        EXIT.
      ENDLOOP.
    ENDIF.
Here the hierarchy in BW system:
XXX Cons Unit Hierarchy Set; InfoObject ; Node Name
- XXX Cons Unit Hierarchy Set; 0HIER_NODE; ZBUNITALL
- XXX DownStream ... ; OHIER_NODE; MEZBUNITMDI
     - ME/A730; 0CS_UNIT; MEA730
     - ME/A740; 0CS_UNIT; MEA740
- XXX Power ; OHIER_NODE; MEZBUNITMPI
    - ME A800 - A808; OHIER_NODE; MEZBUNITMPI
    - PT Mitra xxx; 0CS_UNIT; MEA820
Anyone can help my problem? Thank you
Regards,
Satria B Tandyono

Hi Satria,
Instead of following code ---
CLEAR l_s_range-low.
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
l_s_range-high = '0HIER_NODE'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
l_s_range-high = '0HIER_NODE'.
ENDIF.
try this ---
IF loc_var_range-low EQ '000000000000030000'
OR loc_var_range-low EQ '000000000000010130'.
l_s_range-low = 'MEZBUNITMDI'.
ELSEIF loc_var_range-low EQ '000000000000040000'
OR loc_var_range-low EQ '000000000000010160'.
l_s_range-low = 'MEZBUNITMPI'.
ENDIF.
Note : whenver the option is EQ, the system takes only low value.

Full text not getting displayed while using RSRT

Hi,
I am facing issue while downloading data using RSRT in BI system.
When I go to RSRT and execute a report the output doesn't display full text for a characteristic. i.e. the characteristic has a size of 60 characters, but only 30 chars ( approx) are being displayed as report output in RSRT.
COuld anyone here please help me in getting the full text using RSRT transaction?
I am not using Bex here for the reason that the output has more than 1.8 lac records and hence I get an error while using Bex
WHen I try to execute this report using Bex for a small selection I could see full text there.
And there is no text master data maintained for this characteristic.
Thanks in advance for your replies.

Hi,
As you said you have 1.8 Lac records, There is no point in increasing the size to maximum number possible i.e 65K .
You have following three options to satisfy your requirement.:
1.    Usage of web reporting for export of more than 65k rows. According the note: 1127156 - Safety belt: Result set is too large, in BW version 7.x it I possible to set parameters that would allow such a massive export of data.
2.    Functionality of OpenHubs. Data can be placed directly into the files (e.g. in CSV format) on application server. Be careful here OpenHubs are specially licensed and by using it there are additional fees.
3.    Coding of custom ABAP report which runs BW query and gets all its output and saves it in the flat files.
Please let me know if this info is helpful.
Regards,
Krishna Tangudu

Result row while using hierarchy

Similar Messages

Maybe you are looking for